How can I replace a text/range of text enclosed in a XML tag

I want to replace a piece of text enclosed inside a XML tag in a text frame.
In my input parameters, I have the In-design document page number, text frame UID in that page and the XML tag name inside that text frame
which encloses my old text.
what command/function/interface can I use which can help me to replace the existing text with the input text ?
eg:
[old text] -----> [new text]
where [ ] is XML tag with name tag1.

After some trail and POC, I was able to write the below piece of code.
This detects the starting and ending position of the marker and based on that we can replace the text inside it. Hope it helps.
InterfacePtr<IDocumentSignalData> data(signalMgr, UseDefaultIID());
        if (data == nil)
            break;
        UIDRef docRef = data->GetDocument();
        InterfacePtr<IDocument> doc(docRef, IID_IDOCUMENT);
IDataBase *db = docRef.GetDataBase();
//Get the spread
InterfacePtr<ISpreadList> spreadList(doc, UseDefaultIID());
int32 spreadCount = spreadList->GetSpreadCount();
for ( int32 spreadIndex = 0; spreadIndex < spreadCount; spreadIndex++ )
// Get the spread reference
UIDRef spreadUIDRef(db, spreadList->GetNthSpreadUID(spreadIndex));
// Get the spread object
InterfacePtr<ISpread> spread(spreadUIDRef, UseDefaultIID());
int32 numberOfPages = spread->GetNumPages();
for (int32 nPage = 0; nPage < numberOfPages; nPage++ )
UIDList pageItemList(db);
spread->GetItemsOnPage(nPage, &pageItemList, kFalse, kFalse);
// Iterate the page items and save off the UIDs of frames.
int32 pageItemListLength = pageItemList.Length();
for (int32 j = 0; j < pageItemListLength; j++ )
UIDRef pageItemRef = pageItemList.GetRef(j);
InterfacePtr<IFrameType> frame(pageItemRef, UseDefaultIID());
if( frame->IsTextFrame() )
//Now trying to get the marker position for XML tag
TextIndex startPos=0,endPos=0;
IXMLReferenceData *xmlReferenceData= Utils<IXMLUtils>()->QueryXMLReferenceData(pageItemRef);
XMLReference ref = xmlReferenceData->GetReference();
//IIDXMLElement *element = ref.Instantiate();
InterfacePtr<IIDXMLElement> element(ref.Instantiate());
UID tagUID = element->GetTagUID();
WideString elementName = element->GetTagString();
for(int32 i=0; i < element->GetChildCount(); i++)
XMLReference childRef = element->GetNthChild(i);
InterfacePtr<IIDXMLElement> child_element(childRef.Instantiate());
tagUID = child_element->GetTagUID();
elementName = child_element->GetTagString();
int32 index=0;
Utils<IXMLUtils>()->GetElementMarkerPositions(child_element,&startPos,&endPos);
startPos += 1; // move forward to exclude the starting tag
} // iterate pages in spread

Similar Messages

How Can I replace newScale Text Strings with Custom Values?

How Can I replace newScale Text Strings with Custom Values?
How can I replace newScale text strings with custom values?
All newScale text is customizable. Follow the procedure below to change the value of any text string that appears in RequestCenter online pages.
Procedure
1. Find out the String ID of the text string you would like to overwrite by turning on the String ID display:
a) Navigate to the RequestCenter.ear/config directory.
b) Open the newscale.properties file and add the following name-value pair at the end of the file:res.format=2
c) Save the file.
d) Repeat steps b and c for the RmiConfig.prop and RequestCenter.prop files.
e) Stop and restart the RequestCenter service.
f) Log in to RequestCenter and browse to the page that has the text you want to overwrite. In front of the text you will now see the String ID.
g) Note down the String ID's you want to change.
2. Navigate to the directory: /RequestCenter.ear/RequestCenter.war/WEB-INF/classes/com/newscale/bfw.
3. Create the following sub-directory: res/resources
4. Create the following empty text files in the directory you just created:
RequestCenter_0.properties
RequestCenter_1.properties
RequestCenter_2.properties
RequestCenter_3.properties
RequestCenter_4.properties
RequestCenter_5.properties
RequestCenter_6.properties
RequestCenter_7.properties
5. Add the custom text strings to the appropriate RequestCenter_<Number>.properties file in the following manner (name-value pair) StringID=YourCustomTextString
Example: The StringID for "Available Work" in ServiceManager is 699.
If you wanted to change "Available Work" to "General Inbox", you would add the following line to the RequestCenter_0.properties file
699=General Inbox
Strings are divided into the following files, based on their numeric ID:
Strings are divided into the following files, based on their numeric ID:
String ID File Name
0 to 999 -> RequestCenter_0.properties
1000 to 1999 -> RequestCenter_1.properties
2000 to 2999 -> RequestCenter_2.properties
3000 to 3999 -> RequestCenter_3.properties
4000 to 4999 -> RequestCenter_4.properties
5000 to 5999 -> RequestCenter_5.properties
6000 to 6999 -> RequestCenter_6.properties
7000 to 7999 -> RequestCenter_7.properties
6. Turn off the String ID display by removing (or commenting out) the line "res.format=2" from the newscale.properties, RequestCenter.prop and RmiConfig.prop files
7. Restart RequestCenter.
Your customized text should be displayed.

I've recently come across this information and it was very helpful in changing some of the inline text.
However, one place that seemed out of reach with this method was the three main buttons on an "Order" page. Specifically the "Add & Review Order" button was confusing some of our users.
Through the use of JavaScript we were able to modify the label of this button. We placed JS in the footer.html file that changes the value of the butt

How can I get the text value of an XML element in MXML ?

Hi,
I have the following XML loaded into a variable of type XML :
<properties>
     <comment>RIMpro Data Collector Configuration</comment>
     <entry key="server.pear.username"/>
     <entry key="server.apple.retry.times">5</entry>
     <entry key="rdc.proxy.host">http://192.168.1.2:8080</entry>
/properties>
I can easily get the key attribute displayed in a DataGridColumn by setting the dataProvider to my variable and the dataField to "@key". But I do not know how to get the text value in a second column... Is there a way or do I need to change my XML to something like this :
<properties>
     <comment>RIMpro Data Collector Configuration</comment>
     <entry key="server.pear.username"/>
     <entry key="server.apple.retry.times" value="5"></entry>
     <entry key="rdc.proxy.host" value="http://192.168.1.2:8080"></entry>
/properties>
Many thanks in advance.
Marc

yes, you'd better modify your XML structure to fit the DataGrid internals.
Since dataField pattern require each grid row item to have a named property to be displayed, otherwise you'll be forced to overcome this pattern using custom labelFunction for the particular column which will implement your custom actions on how to extract appropriate data for that column out of grid row item. It will be much more complicated than just rearranging your xml structure.

How can I create a Text-Input Field in BexAnalyzer for a Planning Function

Hello,
i want to create a pre calculation(contribution accounting) for Materials in BI-Integrated Planning. These Materials aren't in the master data. So I create a new Info Object for pre calculated materials with only a material-number as key and a text-description.
Now I want to write a Exit-Function, which creates new materials in these Info Object. The user should start this function in a planning application in BexAnalyzer. There the user should have the possibility to enter a text-description for the new material. How can I create such a Text-Field in BexAnalyzer and how can I read this text filed in a planning function (exit).
Thanks in advance

Hi Jürgen,
you can create a parameter for this in the exit function and a variable for the parameter. In BEx Analyzer then create a button for the planning function; in the button parameterization use VAR_NAME = , i.e. use an Excel formula here to get the value from an Excel input field.
The command range should be some 'hidden area' in your Excel sheet.
But may be you don't need this. Use a characteristic without master data. Then ensure that that the query uses the option 'key' as display. In new lines you can then enter the key, the system creates a SID on the fly (but the text table will not be updated). In this scenario you may take text also from the key. May be you can update the text table (online or in batch) by simply using function modules from function group RSNDI_MD (not released by SAP).
But observere that the system in BI Planning reads only the active version, i.e. if you change something on the fly the changes may not be visible.
Regards,
Gregor

How can I remove ASCII text from a field when I use it in a query

How can I remove ASCII text from a field when I use it in a query?
I am running a select statement on a table that appears to have ASCII text in some of the fields. If I use these fields in the where statement like the code below nothing returns:
SELECT FIELD1 FROM TABLE1 WHERE FIELD1 IS NULL
But the field looks empty if I do a straight select without the where clause. Additionally, one of the fields has text but appears to be padded out with ASCII text, which I need to strip out before I can use this field in a where or join statement. I have tried using a trim, ltrim, rtrim, to_char, nvl, decode and nothing works. When I use excel to run the same query it looks as if these ASCII fields are boxes.
I have asked our DBA team to see what they can do to prevent these from going into the table, but in the mean time I still need to run this report.
Do you have any suggestions?

Can you provide an example? I've been trying (for
example) "select translate(' test one', ascii(' '),
'X') from dual" with no luck.
Thank you.To replace space, you should query like this:
select translate(' test one', chr(32), 'X') from dual instead of select translate(' test one', ascii(' '), 'X') from dual Thanks,
Dharmesh Patel

How can i make the text go vertically in numbers

How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.

I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
          my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
          repeat
                    try
                              if (the clipboard as text) is not "" then exit repeat
                    on error
                    end try
          end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
          my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
          local oTIDs, t
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set t to l as text
          set AppleScript's text item delimiters to oTIDs
          return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
          tell application a to activate
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
          local le_texte, la_largeur, la_hauteur, myNewDoc
          my activateGUIscripting()
Extract properties of the source/target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of column colNum1 & name of row rowNum1)
          end tell
Cut*)
          my raccourci("Numbers", "x", "c")
Trigger Preview *)
          tell application "System Events"
                    if "Preview" is not in (name of every application process) then launch application "Preview"
          end tell
delay 0.2 -- required
New document from the clipboard *)
          my raccourci("Preview", "n", "c")
Rotate to left *)
          my raccourci("Preview", "l", "c")
Copy *)
          my raccourci("Preview", "c", "c")
Quit *)
          my raccourci("Preview", "q", "c")
          (system attribute "sys2") < 7
          if result then
Click the [Don't Save] button in the warning sheet *)
                    tell application "Preview" to activate
                    tell application "System Events" to tell application process "Preview" to tell window 1
                              name of buttons
                              repeat 50 times
                                        delay 0.1
                                        if exists sheet 1 then exit repeat
                              end repeat
                              tell sheet 1 to click button 2
                    end tell
          end if
Back to Numbers *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
          end tell
Paste in the cell *)
          my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
          tell application "Numbers" to tell document 1
                    set d_name to its name
                    set s_name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word.

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word in the document. I am teacher. So for example when a student came to word he/she did not know, if he/she hovered the cursor over the word, a defintion or other information would appear. You can do this in Word using bookmarks/hyperlinks but I can't figure this out in Pages. I can link it to another point in my Pages document but I just need the text to pop up - not take the reader to another location. THANK YOU!!!!!!

Have you tried Word for Mac?
You will need to test if links survive export or printing to .pdf
Peter

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

Is there any way to replace my iphone 5. The back camera is not working. Since there's no apple store here in the philippines. How can i replace it?

How can i replace it?

You probably do in NZ ..................
The Apple iphone warranty is not and never has been from the very first iPhone, international
Sorry but you were stitched up

My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

Just an email address
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

How can I prevent my texts showing on another family members iPhone?

How can I prevent my texts showing on another family members iPhone?

Stop using the same apple ID for iMessage on both phones.
Your question has already been asked and answered many many times. Search before posting please.

How can i replace my new iPad mini to ipad air

how can I replace my new iPad mini to a new iPad air online

If you bought the Mini within the past 14 days you can get a refund and buy the Air. Take it to an Apple store.
Otherwise.......
Your only option is to sell the iPad and buy a new one.
Apple Reuse and Recycle Program
http://store.apple.com/us/browse/reuse_and_recycle
How to Sell Your Old iPad http://tinyurl.com/85d69lk
Other sources to sell.
eBay Instant Sell http://instantsale.ebay.com/?search=ipad
Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
Sell Electronics for Cash - Next Worth http://www.nextworth.com/
Buy My Tronics http://www.buymytronics.com/
Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
Totem http://www.hellototem.com/
How To Sell Your Old iPad: 5 Places To Trade In Your Old Device
http://www.huffingtonpost.com/2013/11/05/ipad-trade-in_n_4218964.html
THIS IS VERY IMPORTANT - What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
 Cheers, Tom

How can I program the text fields in my email forum to have rounded corners

How can I program the text fields in my email forum to have rounded off edges or corners.
this is the code im using.
// insert code here// insert code here// prepare email field
var email = sym.$("email")
email.html("Enter your Email: ");
inputEmail = $('<input />').attr({'type':'text', 'value':'', 'id':'email'});
inputEmail .css ('font-size', 14);
inputEmail .css ('width', 350);
inputEmail .css ('background-color', '#4e4e4e');
inputEmail .appendTo(email);
// prepare topic field
var topic = sym.$("topic");
topic.html("Topic: ");
inputTopic = $('<input />').attr({'type':'text', 'value':'', 'id':'topic'});
inputTopic .css ('font-size', 14);
inputTopic .css ('width', 350);
inputTopic .css ('background-color', '#4e4e4e');
inputTopic .appendTo(topic);
// prepare message field
var message = sym.$("message");
message.html("Message: ");
inputMessage = $('<textarea />').attr({'type':'textarea','rows':'10', 'cols': '25','value':'', 'id':'message'});
inputMessage .css ('font-family',"Arial,Helvtica,sans-serif");
inputMessage .css ('color',"#ffffff");
inputMessage .css ('font-size', 14);
inputMessage .css ('background-color', '#4e4e4e');
inputMessage .css ('box-shadow', '#4e4e4e');
inputMessage .css ('width', 350);
inputMessage .css ('height', 150);
inputMessage .appendTo(message);
var submitBtn = sym.$("btn");
submitBtn.html("Submit");
submitBtn.css("text-align", "center");
submitBtn.css("font-size",14);
submitBtn.css("font-weight","bold");
submitBtn.css("color","#ffffff");

Try this: inputEmail.css ('border-radius', '25px');
attachment
more details

How can I replace an administrators account?

I have an older Powerbook G4 laptop that someone else would like. How can I replace the adminsitrator's account?

Hi Bob,
2 ways to go...
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
   2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
      *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
   3. Click the Erase tab.
   4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
   5. Select your Mac OS X volume.
   6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion do a new install.
Or...
Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
In the same pref pane highlight your old account, click the little minus icon, then use Disk Utility to Secure Erase Free Space.

How can I replace the cursor in the below query?

I have this below query which calls a stored procedure that takes only 1 item's attributes at a time. But because of performance problems we are
required to remove the cursor. How can I replace the below cursor logic with set operations or CTE? Please advice.
DECLARE db_cursor_ava CURSOR
FOR
SELECT t.[agent-id],
t.[start-date],
t.[end-date],
t.[monitor-days],
t.[monitor-start],
t.[monitor-end],
t.[timezone-offset]
FROM @tmpAgentPeriodTimeRange t
OPEN db_cursor_ava
FETCH NEXT FROM db_cursor_ava INTO @agentID_ava,
@stDateTime_ava,
@endDateTime_ava,
@monDays_ava,
@monSt_ava,
@monEnd_ava,
@offset_ava
WHILE @@FETCH_STATUS = 0
BEGIN
DELETE
FROM @tmpMonitorPeriod
DELETE
FROM @tmpFinalResult
SET @runID = 1
IF(@endDateTime_ava>DATEADD(MI,@offset_ava, GETUTCDATE()))
BEGIN
SET @endDateTime_ava=DATEADD(MI,@offset_ava, GETUTCDATE())
END
INSERT INTO @tmpMonitorPeriod
EXEC core.usp_GetMonitoringPeriod
@startDate = @stDateTime_ava,
@endDate = @endDateTime_ava,
@monitoringDays = @monDays_ava,
@monitoringStart = @monSt_ava,
@monitoringEnd = @monEnd_ava
SELECT @maxID = MAX(tm.id)
FROM @tmpMonitorPeriod tm
FETCH NEXT FROM db_cursor_ava INTO @agentID_ava,
@stDateTime_ava,
@endDateTime_ava,
@monDays_ava,
@monSt_ava,
@monEnd_ava,
@offset_ava
END
CLOSE db_cursor_ava
DEALLOCATE db_cursor_ava
mayooran99

You've been down this path before - and the response is exactly the same.
how to replace cursor logic
And I'll suggest that you post the entire code - since you repeatedly delete 2 table variables but only populate one. The setting of @maxID also seems to have no purpose. And perhaps the issue here isn't the cursor but the general approach. Who knows
- but it appears you may have prematurely assumed that the cursor is the problem.

How can I replace a text/range of text enclosed in a XML tag

Similar Messages

Maybe you are looking for