How can I set a passcode that is only required at certain times of the day. Ie: my child needs access for school use, but don't want her playing iPad in the middle of the night. I cannot identify a way to have the iPad turn off or require a password
I cannot find a way to enable my child's iPad to require a passcode only at certain times of the day.
Yes I have used the clock/timer/ countdown - great to restrict how many minutes of iPad usage they get a day.
But as my child requires the iPad in school for class lessons the usage at school varies maybe 30 mins 1 day and a few hrs on other days
I want the ability to say set the iPad to not work between say 7pm and 7am, ( unless a passcode is entered) so my child isn't playing games on it in the middle of the night...
Apple I cannot see anything in the settings that performs this function
Help
You can Remote Lock his iPad with Find My iPad using a computer at whatever time you like.
http://support.apple.com/kb/PH2700
Note: The iPad may be disabled if he tries the passcode too many times.
Similar Messages
-
How can I set up a program to stop at a certain time, or after a period of time?
I am using LabVIEW to measure dc voltages over a period of time. The data is exported into an Excel file. I would like to be able to set up the program to stop at a certain time, or after a certain number of hours. This way when I run a test that will start near the end of the week and would stop on say, Saturday, it will not continue to record all the data after that, which I do not need. I would love to be able to set a time for it to end, but I also wouldn't mind having it end, or stop recording data, after a certain voltage has been reached.
Its hard to say without knowing more about how your program is set up. Assuming the data aquisition is in a while loop, you can just wire a bunch of different stop conditions into a compound math node. Then right click on it and select "OR". A caveat about the comparisons I used in my little example: Comparing DBLs can lead to unexpected results when the two values are very close together.
Message Edited by jasonhill on 06-16-2006 10:59 AM
Attachments:
stop the loop.PNG 5 KB -
How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.
There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album. -
How can i set a form to read only when a checkbox it checked?
How can i set a form to read only when a checkbox it checked?
Hi,
If you search the forums for Paul's example LockAllFields. This contains a function in a script object that you can call from the click event of the checkbox.
Re: Saving Fillable Form as non-fillable PDF
Good luck,
Niall
Assure Dynamics -
How can I set my phone to delete messages after a certain period of time? 6 months, 1 year??? It is taking up over 4GB on my phone. I don't want to delete everything just the oldest ones.
If you update to iOS 8, you can select that in Settings>Messages>Keep Message and then select your option. If you don't update to iOS 8, you'll need to do it manually.
-
How can I set two different emails in only one contact form?
How can I set two different emails in only one contact form?
To enter multiple email address with the Contact Form Widgets:
Click the Options icon for the selected widget, then
In the Email to box, enter multiple emails by delimiting them with a semi-colon. For example: [email protected];[email protected]
Cari -
On my PowerBook, I was able to set up events to show up on a specific day repeating each month, say the first Thursday. How can I get that on the iPad 2?
For your repeating even, I'm assuming this is your Yahoo calendar? that isn't a Firefox issue, I suggest you try to contact yahoo.
For the other issue, try the following:
Update to Firefox 15. Then, [[Reset Firefox – easily fix most problems]] -
How can I purchase an album that is only available in the US and not Australia? HELP!
I wish to purchase an artist album that is only available in the US iTunes store. Is it possible to get my hands on?
Not from itunes.
You can buy it from Amazon or some other music retailer. -
How can i set a role that can't see the infoarea?
HI:
i want creat a role ,when use the role open the query , he can only see the report under the favorite and role,can't see the infoarea , how can setting the role's right?Hi!
Perhaps you should try creating a user that carries exactly the same authorizations for your intended user/s. Once created, you can then see if the infoarea can then be visible still.
Regards,
P. -
How can I set it so that itunes remembers where my music is stored?
Dear Expert,
So, I have the settings on my itunes for the music files to be on my external hard drive, with my library on the internal hard drive. For some reason, about one out of 3 songs, when I select it to play, a message tells me it doesn't know where the song is and displays an exclamation point to the left of the song title. Then it asks me would I like to locate it? I go through the finder window and find it, under a folder in my itunes music folder on my external hard drive.
I am told this may happen because I open itunes without my external hard drive on at some point. Surely, I should not have to now direct itunes to each of my songs simply because I had my computer on without my external hard drive connected at one point.
I have already reloaded itunes, so I don't know what to do. Thanks for your help.I too have this problem. I just transfered my entire library to an external drive it worked great for a couple of days until I accidently opened itunes without holding down the option key. Now iTunes can't find any of my tunes even though I choose the library on the external drive.
I have tried throwing away the itunes library on my harddrive and then reopening itunes with the option key and selecting the library on my external drive. This did not work.
I can't believe apple didn't think this through. There must be away for it to figure out where my music is! -
On my iPad I can only send iMessages but not all my friends have an I pad or iPhone how can I send other messages too
You will need to download a texting App from the App Store. I have seen Text + recommended on the forum.
-
HOW can i buy an album that is only available in my country?
I recently bumped into this awesome album
http://itunes.apple.com/ie/album/need-to-feel-loved-feat.-delline/id329722641
Unfortuneately, it says that my "apple id is only valid for purchases in sweden".
Now - how can we get past that? Is there ANY way of solving this problem?Not from itunes.
You can buy it from Amazon or some other music retailer. -
How can i set dynamic properties in HTTP Binding adapter at run time
Hi,
I am trying to put dynamic properties in HTTP Binding adapter at run time. I am able to Set endpointURI, UserName and Password dynamically using below code.
Is it possible to set Version , Retry Count, timeout, authentication type at run time.
below is code for setting endpointURI, UserName and Password dynamically.
<invoke name="HttpInvoke" bpelx:invokeAsDetail="no"
partnerLink="SACS_Http_Adapter"
portType="ns1:Request_Response_ptt" operation="Request-Response"
inputVariable="HttpInvoke_Request-Response_InputVariable"
outputVariable="HttpInvoke_Request-Response_OutputVariable">
<bpelx:toProperties>
<bpelx:toProperty name="endpointURI" variable="inputVariable"
part="payload" query="@endpoint"/>
<bpelx:toProperty name="javax.xml.ws.security.auth.username"
variable="inputVariable" part="payload"
query="@username"/>
<bpelx:toProperty name="javax.xml.ws.security.auth.password"
variable="inputVariable" part="payload"
query="@password"/>
</bpelx:toProperties>
</invoke>
Thanks,
Siva
Edited by: 929920 on Apr 25, 2012 7:45 AMHi Bastain,
Assuming your using the Batch Process Model, you can programatically insert a new SN into the correct parameter in the postUUT callback sequence.
This sequence has access to the UUT.SerialNumber parameter so you can use a File Global to pass the SN from the main sequence to the postUUT callback.
Here is an example of what I mean.
Adam
Attachments:
set SN within Main Sequence.seq 80 KB -
I forgot my security question answers and the info apple gave to me didn't help, how do I reset them, I also don't want to call them?
From http://support.apple.com/kb/HT5665 :
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers (the steps half-way down that page should give you a reset link)
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID passwordcontact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
If you can’t reset them via the above instructions (you won't be able to add a rescue email address until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset - which is likely to be by phone as they need to confirm your id and that it's your account.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
Can you set a song to go on at a certain time like an alarm clock
can you set your itunes to go off at a cetain time like an alarm clock?????
Set the timer accordingly (tap to enlarge image)
Maybe you are looking for
-
Session Error - Cannot call getObject on :display.session on a user form
On an end user form I have a manager label. The manager attribute in the user object holds the unique identifier but I must display the full name. <br><br> So I have the following code to go get the fullname: <br><br> <block> <invoke name='getAttribu
-
Change in validity period of Scheduling agreement
Dear all, I extended validity period of existing Scheduling agreement, But In MD04 it is not creating Schedule lines. Regards, Nitin Patil.
-
Text getting cleared after throwing OAException message
Hi, I have a message text input item and a drop down if user does not enter anything in either and hits button then I am throwing a OAException with a message. The problem is each time the user enters let us say some text in the drop down and does no
-
Can the apps used on an iPhone be used on am iMac/
Can apps used on an iPhone be used on an iMac?
-
SQL query to fetch the catalog category for a PLM item
Hi All, Can anyone help me with a sql query of how we can fetch the catalog category for a PLM item. Regards, Shruti