How can I set layoutset programatically in a folder ?

Hi Gurus,
I have a requirement in which I need to assign, programatically, a layout set for some folder. Does anybody give me an idea about it ?
Thanks a lot.
Patricio.

How To Use Automator To Batch Rename Images on Mac

Similar Messages

How can I set up a second Contacts folder on my IPhone

I have an Iphone and a Palm Pilot. I want to stop carring the Palm, and have the contacts there put on the IPhone.
I came upon Plaxo, which would allow me to sync from desktops and laptops to the net, as well as syncing with my IPhone.
However, it appears that Plaxo will sync with the IPhone Contact folder, then wipe out the subset of numbers I keep there. I want to keep the contacts separate - especially because of the ringer tone controls.
Is there a way to create a second contact folder that I can sync with Plaxo, which will keep separate the current IPhone contacts in my existing Contacts folder?
My existing contacts folder was created, in a way I which I knew, when I got the phone. It is a 3G, using 4.2.1 (8C148)..

If I can not set up a second Contacts folder, does anybody have an alternative way of having contact information that a person could see the information from an Outlook Format available for viewing?

How can i set up a new imap folder on my own domain

I have my own personal domain on my own server and I am wondering if the only way to set up a new folder is via cPanel direct on my server - or can it be done through Mail?

If I can not set up a second Contacts folder, does anybody have an alternative way of having contact information that a person could see the information from an Outlook Format available for viewing?

How can you set up a password protected folder in OSX 10.8.2

I'm trying to set up password protected folder on a new mac desktop. Version 10.8.2
I have done this before in Mountain Lion and previous OS versions by creating a "Disk Image" in the disk utitlity. It's been easy. But in this newer version, it doesn't give me the same options that I've seen in the past nor see on many online posts. And when I try to create, it just gives me an error message saying there is not enough space, which is crazy as there is over 500GB open.
Any ideas?
Thanks

It still works in Disk Utility (DU):
1. Determine one file that shall be inside the DMG, e.g. one on the Desktop (obviously, you can delete it later again). say it's xyz.jpg.
2. In DU, without a drive selected, click New Image.
3. Expand to Finder-like view by clicking on the arrow next to Save As.
4. Click on xyz.jpg, even if greyed out. It will show up under Save As with the .dmg suffix.
5. In the bottom part, select Name, Size, and all other parameters. You want encryption, so pick one, then click Create.
6. Next, enter and remember your password. Probably you will NOT want it to be remembered in Keychain...
7. That's it: at the same location as xyz.jpg you now have xyz.dmg. In the Finder it's open, and you can manage its content until you eject it.

How can I set the file name and folder for output to PDF from another application?

I am developing an application in Microsoft Access where the printed reports are to be saved in PDF format for archive purposes. I can send the output to Adobe X, but the default file name is the Access report name and the folder selected is the one last used.
What I need to do is to create the file with a specific name (which changes for each run) and to a specific folder (which also changes for each run).
The language I'm using is Visual Basic for Applications which is located in an Access form that controls the report production.
Any suggestions, please?

Got it - many thanks.

HT1338 How can i set password for my folder?

How can i set a password for my folder?

Mac OS X does not natively include a method for passwording only selected folders. You can either get a third-party utility such as Knox (from AgileBits) or you can create an encrypted disk image (using Disk Utilty) and keep the files you wish protected in that disk image.
Regards.

I forgot the administrator password for my mac and cant set a new one without it how can i set a new one

i forgot the administrator password for my mac and cant set a new one without it how can i set a new one

Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

How can I set an event to repeat on a week day rather than a numerical day of each month?

How can I set an event to repeat on a week day rather than a numerical day of each month? I see an option at the bottom of the repeat window .... but I cannot use it. Actually, when I try it freezes up my Calendar.
Lorrene Baum Davis

These scrrenshots are from Snow Leopard - I would think that Lion wouldn't be too much different.

How can I set my WebI filters to Null and not Null

Folks,
I have created a report in WebI and now I am to set up some filters as Null and some Not Null.
How can I set my WebI filters to Null and not Null?
Regards,
Bashir Awan

Hi,
As you said you could do it at the report level and also at the universe level.
One more way is to create the filters in the universe levele and add them in thequery filter.
Ex: in the filter you need to write :
Column1 is null and and column 2 is not null etc.
Hope this will help.
If this did't solve your problem then please explain it in detail.
Cheers,
Ravichandra K

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side. E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

I have an iPad with IMAP email accounts set up but I can find no "inbox, drafts, trash" folders anywhere, either on my ipad or desktop Mac. How can I set them up? They do not show on my MacMail preferences either and I can find no way to add them.

I have an iPad with IMAP email accounts set up but can find no "inbox, drafts, trash" folders for each email account anywhere on my iPad or in Mac Mail. How can I set them up? I can't find anyway to set them up anywhere. Thanks

Hello blu monkey,
I found some resources that I think might help with the visibility of your IMAP email folders on your iPad and Mac.
On your iPad, you may need to follow the steps in this article to make sure your folders are visible:
iOS: If IMAP Mail folders are not visible
http://support.apple.com/kb/HT1393
On your Mac, I am not sure if you have the sidebar enabled, but you can enable it using the steps in the article below. When this is showing, you should see your email account listed near the bottom with a triangle next to it. When the triangle is pointing down, it should show your folders:
Mail (Mountain Lion): Show or hide the sidebar
http://support.apple.com/kb/PH11763
Thank you for using Apple Support Communities.
Best,
Sheila M.

How can I set BPEL server enviorment and create BPEL domain?

Without use the http console, how can I set BPEL server enviorment and create BPEL domain?
When I try to use API like below
import com.oracle.bpel.client.Server;
Server s = new Server(ServerAuthFactory.authenticate("oracle","localhost"));
But I always got four exceptions and one warning like below:
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\ejb.properties (The system cannot find the path specified)
Warning: unable to read transaction.interoperability config property
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.lang.Exception: Failed to create "ejb/collaxa/system/ServerBean" bean; exception reported is: "javax.naming.CommunicationException: Can't find SerialContextProvider
Is it right to use com.oracle.bpel.client.Server like this, please help me.
Best regards,
Vita

Anyone can help me? Because I need deploy BPEL process on production server, so I need the Java funtion to create domain. Thank you very much if you can tell me the correct method of using com.oracle.bpel.client.Server API.

I would like to know how can I set songs in iTunes to play at different times automatically during the day. i.e. one song at 10am the other at 10:30am etc..

I would like to know how can I set songs in iTunes to play at different times automatically during the day. i.e. one song at 10am the other at 10:30am etc..

My daughter and i share same itunes account but we want to separate and have our own. if i change "our" account to "her" account how can i set up a new "for me only" account and retrieve all my contacts and apps

my daughter and i share the same i tunes account but want to have our own now. how can i set up a new account just for me and still move or transfer my existing apps, contacts etc?

Yes, with the credentials of the account that the media/content was purchased with.
Content is permanently tied to the account it is purchased with and cannot be merged, moved, or transferred to another account.

How can I set layoutset programatically in a folder ?

Similar Messages

Maybe you are looking for