How can I simulate a normal distribution?

Hello
I want to simulate temperatur that change over time. Most of the time the temperatur is going to stay at the temperatur that the user has chosen....but sometimes it will change some degrees up or down. I want it to behave as if I had a regulator that tried to keep the temperatur at a chosen value, but sometimes it did not manage.... The best way would be if the temperatur changed only one degree at the time (not jumping from 18 degrees to 22 degrees). Have anyone any suggestions on how to do this?
-Mari

It has to do with probability. The original was was to add or subtract based on < or > .5 so that is why it would not get the full swing. Added more randomizers and now you can see the full swing. Used LV 8.0 to save to 7.1 version.
Matt
Message Edited by mfitzsimons on 06-01-2006 07:14 AM
Matthew Fitzsimons
Certified LabVIEW Architect
LabVIEW 6.1 ... 2013, LVOOP, GOOP, TestStand, DAQ, and Vison
Attachments:
randomCharting2.vi ‏50 KB

Similar Messages

I have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

i have a macbook pro. i think i might have pushed some buttons that made my macbook look for a wireless keyboard.. i dont have any wireless keyboard. and now i cant use the keyboard on my macbook. how can i get the normal keyboard staring?

korgba wrote:
it pops up a script were it says that the macbook cannot find a bluetooth keyboard, and it isnt a keyboard connected
For some reason, your Mac doesn't recognise that a keyboard is present, so it looks for a wireless keyboard. The question is, why doesn't your Mac recognise that a keyboard is attached?
First, you need to make sure you remove all peripherals, especially USB peripherals (the keyboard is on the USB bus). Then restart holding down the Shift key. This should boot in Safe mode. If the computer boots normally (not in safe mode) and the keyboard is still not working, try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>
If that still doesn't fix the problem, then the keyboard (or its controller) is probably damaged and needs to be replaced.

In Debugging how can we view the normal data instead of Hexadecimal data

While i am debugging if i am checked internal table structure fields. Hexa decmial data is coming up. how can we check normal data.

If u r using Standard Debugger (Old Debugger) U will have a icon with + or - (search button type) beside ur fields. Click that. If that is in + mode u will see ur actual data, if it is in - u will see Hexa data.
awrd points if helpful
Bhupal

I get a very large icons when I received a call. How can I get them normal size

I got a very large icons after receiving a call. How can I get normal size again?

You have Zoom on... double tap with three fingers to turn it off. Go into Settings > General > Accessibility to disable it.
See p. 243... http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

How Can I Simulate Double-Clicking A File To Open It In The Default App Without Installing Default App?

I have an app written with Visual Studio 2013. The app has code for opening a file using the standard OpenFileDialog and also has code (AutoOpenFile()) for opening a file when a user double-clicks on a file that is handled by the app. I have not yet created
an installer for the app, so I won't be able to test it's AutoOpenFile() code...unless there is a way to simulate the process of auto-opening the double-clicked file without actually installing the app on my PC. Anyone?

Thanks for your reply, Wyck. I already have the necessary code in my app for opening a file when I double-click on it. The problem is that the app is not currently installed on my PC. Until I do install it, is there a way I can test-run that code
by double-clicking on an associated file?
You lost me at: you want to test-run code that is not on your PC.
O_o
You want to double-click a file, and then...what do you want to have happen? You want to run...something...that is not on your PC??
The "simulation" is to launch your app from the command line and pass in the name of the file you wanted to simulate a "double-click" of.
Regardless, you cannot get the shell to have a double-click of a file cause your application to launch unless you modify the registry to do so. (This is tantamount to "install" to me.)
In the spirit of continuing to be helpful, though, I'll assume that this is what you want to do and I'll show you how to get it done with the least amount of tampering with your registry.
Here are minimally invasive registry modifications you need to make to get it to launch a program when you double-click your file. It's pretty small.
EXAMPLE ONLY:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.wyck]
@="Wyck.Document"
[HKEY_CLASSES_ROOT\Wyck.Document\shell\open\command]
@="c:\\windows\\system32\\notepad.exe \"%1\""
[You have to save the above with your appropriate modifications to a file with the
.reg extension (e.g.: test.reg) and then you'll have to double-click the test.reg file to "merge" these settings into your registry.]
The example above registers a file extension called .wyck and assigns a completely arbitrary class name to it called
Wyck.Document.
Then it associates a shell open command with the Wyck.Document class that causes
notepad.exe to be passed the filename of the file you double-clicked (that's what the
%1 does). You are welcome to replace all the specific names with your own extensions and class names and replace notepad.exe with the path to your (test) executable.
This executable will be launched, but not with a debugger attached. To facilitate debugging it, you'll want to temporarily add some code to your program to pause when the program launches, possibly by showing a message box right at the very beginning
of your main function that says "attach debugger now" so that you can attach a debugger to the process that was started by the shell, and then dismiss the message box and continue debugging.
When you are done with your testing, you can simply manually delete those two registry keys using
regedit.

SP 2013 Development - How can I Simulate Different Devices to Help Design and Test a New UI?

Hello Community!
I am working with SharePoint 2013 and I need to be able to design and test a new design across multiple device browsers. Does anyone know how to simulate a device browser for design and testing? BTW, I know about Device Channels, and they give
me a way to dynamically change my UI for different device browsers, but because this UI is complex, I cannot be sure what dynamic changes need to occur until I can simulate the device browsers and view my new UI in them.
Thanks!
Tom
Tom Molskow - Senior SharePoint Architect - Microsoft Community Contributor 2011 and 2012 Award -
Linked-In - SharePoint Gypsy

Hi Tom,
Because your question is mainly how to simulate different devices, which is more related to SharePoint development, I am moving this thread to
SharePoint 2013 - Development and Programming forum for better response.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I Simulate My VI to Excel?

Thanks for the help, now i can get value from cell using active x. How about if I'm going to simulate my VI to excel. I mean, My VI is reading data and I want put that data to excel while Im running my VI (simulataneously)like a real time.
Thank you again.
(can I have a simple example?)

try this example, you can put data into excel and also you can plot it... and have fun...
ogulcan
Attachments:
Write_Table_and_Chart_to_XL.llb ‏220 KB

How can I simulate a Mac Dock animation?

I am creating a website and would like to have a laptop image and have the menu act like a mac dock, is there anyway I can simulate the fisheye and selection animation to use in the site?

Thanks for the effort, but it doesn't really help me because I use Labview 6.1.
Besides, I just want to know why it doesn't work with the keybd function in user32.dll though all the other inputs work (simulating keystrokes)
I know that in Win2000 it can be done with sendinput too, but I don't know how to configure the CIN.
Thanks again,
Manu.
Certified LabVIEW Developer (CLD)

How can I delete a normal file under e:\downloads ...

Sorry if it is a very basic question, but I have just started using my new Nokia N8 but cannot find a way to delete files from the phone itself. I can connect it to a PC using USB and can delete files .. but did not find any way to do so from the phone. I can just locate/open the files via search application. However, there is no delete feature.
Also any way to create/rename a folder from the phone ?
Thanks in advance for any help / suggestions.
Solved!
Go to Solution.

To delete a file, go to file manager (menu > applications > Office > File mgr.), browse to the correct directory and long press on the filename until a menu appears.
Similarly to rename a folder.
No idea how to create a folder.
(edited to add instuction to go to file manager as it doesn't work in search)
N8-00 pc059C9F6 Belle
808 PureView pc059P6W5

How can we simulate the Indesign paragraph rules in Adobe Flex4?

Hi,
http://help.adobe.com/en_US/indesign/cs/using/WSa285fff53dea4f8617383751001ea8cb3f-6dc1a.h tml
The above link specifies how Paragraph Rules are added in InDesign.
I have a scenario where I would want the same thing to happen in Flex.
So is there any thing that can be done in Adobe Flex 4 in TLF 1.1 so that we can add these rules in the view generated using Flex.
I was initially thinking of using inline graphics but I it will not help my cause.
Please share if there is any way out
Thanks
Ashar

Interesting problem! Here's a suggestion to try.
Make your own ContainerController class that derives from ContainerController and overrides the addTextLine protected method. Each time a line is added, check it to see if it is the first or last line of the paragraph (assuming you wanted rules above and below). If so, then create a new DisplayObject for the rule, and make the rule a child of the TextLine. Then call super.addTextLine, which will add the TextLine to the container. To determine whether the line is first or last, get the TextFlowLine from the TextLine's userData. The TextFlowLine has a location property which will tell you if the line is first, last, middle, or only. To get TLF to use your derived ContainerController class, pass in one of your ContainerController's when you call addController on the textFlow's flowComposer.
So, your code might look something like this:
textFlow.flowComposer.addController(new RuleContainerController(sprite, width, height));
class RuleContainerController extends ContainerController
     override protected function addTextLine(textLine:TextLine, index:int):void
          var line:TextFlowLine = textLine.userData as TextFlowLine;
          if (line.location & TextFlowLine.LAST)
               ruleAfter:DisplayObject = // set up the rule here
               textLine.addChild(ruleAfter);
          super.addTextLine(textLine, index);
This code will add a rule to every paragraph, which may not be what you want. But you could add a user property that you add to the paragraph, and then the addTextLine could use the TextFlowLine to get the paragraph and only attach the rule if property is set.
This is really just sketched out, I haven't compiled or debugged it or anything, but it seems like it might work for your problem. Let me know how it works!
- robin

How can I simulate perspective on an object?

The top object in the attachment is the image I am trying to re-create and I can't for the life of me figure out how to get the ACHA logo to look like it's "placed" on the top of the puck and give it some perspective? The bottom image is what I've created so far.
Can anyone help me?!

danieldehart wrote:
I don't really understand how to do it.
1. Draw a filled circle.
2. Compose art...
3. Drag art to Symbol panel to make to Graphic Symbol.
4. Make a copy of the original circle...maybe change up the color a bit...
5. Choose Effects > 3D > Exrtrude & Bevel...
I left the default Extrude Depth of 50pt and just rotated it roughly into position.
6. Click Map Art...
And choose your new symbol from the Symbol: menu.
7. Enjoy...

How can i simulate a decaying sine in multisim

I'm gonna be glad if some one can help me to simulate a decaying sine signal in multisim 10, best ragards, Aldapool

Hello aldapool. Try using an AC_VOLTAGE component, that you'll find in the Master database, Sources Group, SIGNAL_VOLTAGE _SOURCES family. After you place it, double click it and configure your sinusoidal signal. You'll find a damping factor which will diminish the signal as time runs.
To check if its working place a load resistor and run a transient analysis. Remember to fix the End Time and to analyze the voltage source. You should see a decaying sine signal.
I hope this information is useful for you.
Mensaje editado por Pedrobertoni
Attachments:
sindamp.JPG ‏111 KB

How can I simulate a car engine sound!?

Anyone!? Is it best if i would use a wav file or is there another way go generate en engine sound!? It also needs to adjust the sound for the various speeds.
Thanks

Thanks for the effort, but it doesn't really help me because I use Labview 6.1.
Besides, I just want to know why it doesn't work with the keybd function in user32.dll though all the other inputs work (simulating keystrokes)
I know that in Win2000 it can be done with sendinput too, but I don't know how to configure the CIN.
Thanks again,
Manu.
Certified LabVIEW Developer (CLD)

How can I simulate "Home/End" buttons on my wireless keyboard?

Is there a way to use the "F keys" to do this?
The left and right arrows of the viewer work fine, only if the video is made into a compound clip.

I had the same problem a few weeks ago with my non-Apple Bluetooth keyboard, which doesn't work the way Ben explained.
If yours is not an Apple one and you can't get it to work using the fn key, read this thread (especially Luis' suggestions) about how I managed it.
Are these keyboard shortcuts already in use in FCP X: Cmd + Up Arrow and Cmd + Down Arrow ?

How can I simulate a scope display where the vertical time grid does not scroll?

The "Variable-Time Chart XY.vi" example is very close but I would like to use the timing and "Y" data from a DAQ MX read. The data is being generated continuously at 1000 samples/second and I am reading it as a waveform. I am new to Lab View and do not know how to integrate the waveform data with the Variable-Time Chart XY.vi . Any help would be appreciated.
Thanks,
Kris

Hi Kris,
You could use the "Get Waveform Components" function to get the Y data values of the waveform and then either graph the data for the current time like the example shows or use t0 and dt to graph the data as it is coming in.
Regards,
Andrew
National Instruments
RIO Embedded Hardware PSE
CompactRIO Developers Guide

How can I simulate a normal distributi​on?

Similar Messages

Maybe you are looking for

How can I simulate a normal distribution?