How can i solve my upside down problem in main screen in iPhone 6 Plus 128gb

i have a upside down problem in my iPhone 6 plus 128gb . When i wake up the phone, in the main window all apps are seen in upside down position. and you can not fix it without opening the phone again. i have searched the internet about this problem and i have seen that lots of users have the same problem too.
i restored and reset all settings of my phone but nothing has changed. i want help from apple world....

Is the portrait lock on control panel off or on Is the lock switch on side of iphone off or on Have you tried this press & hold power button & menu button hold both down Until you see Apple Logo you wil not lose any data. If all the things do not work take iphone Back to Apple Shop or the shop where you bought the iPhone. Bsydduk

Similar Messages

  • How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

    How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

    I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side.  E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

  • How can i disable running status of recording from lock screen of iphone 5?

    How can i disable running status of recording from lock screen of iphone 5?

    You need to stop the recording. Is it reading Recording Paused? If so, instead of tapping the red button to stop it, tap the word DONE. That is what actually stops the recording. Tapping the red button just pauses it.

  • How can I solve the Error 110 problem when trying to modify the Description of Properties of PDF?

    Hello!
    I am trying to modify the Description of the PDF fies but I cannot do for some files because of the Error 110.  How can I solve this problem so I can succesfully modify the Description of the Properties of the PDF files?
    I also have one more question!
    Why is it impossible to modify the Description parts when the File name is missing in the Description?  There is a File name on each individual PDFs but some of them have to File names on the Description!
    Thank you very much in advance!

    Noelia, i have the same problem, did you solved it ?I had the same issue as Noelia when I investigated Noelia's issue originally (see the TwoVideos sample application in this thread: Re: How can I play different videos with only one MediaPlayer?
    I tried running the TwoVideos sample application today on Windows XPsp3, JavaFX 2.1b17, JDK7u4ea and I was unable to reproduce the problem, so it is likely fixed either 2.1 or (less likely I believe) a Windows 7 only related issue.
    http://www.oracle.com/technetwork/java/javafx/downloads/devpreview-1429449.html
    If you can reproduce the issue with the latest developer preview, then log a bug at http://javafx-jira.kenai.com with environment details, steps, sample media and code to reproduce the issue.
    Please contact me ainchilc at gmail dot com.If it is an answer to an unanswered question on a public forum, it is best to post the answer on the forum, then everybody who reads the forum will know what the answer is.

  • How can I mount iSight upside down and flip the image?

    My Custom desk setup wont fit any of the given iSight mounts. The only way I can mount it is upside down but can;t find a way to flip the image...
    Power PC G4   Mac OS X (10.3.9)   Flat Panel Display

    I'll put in my 2 cents for this app. Works GREAT with iSight and QT Pro and iMovie HD. Seen it pop up on other apps (iChat for one) but rarely use it on for these few apps. Safari opens iGlasses for some reason... Anyone know why?
    iMac G5   Mac OS X (10.4.6)  

  • How can I solve my photo frame problem?

    Thought I would give this forum a try regarding non-Apple hardware... I have a Coby DP-882 digital picture frame with a SanDisk 2GB card. After connecting the frame via USB, I get the disk reader icon on the desktop. I then just drag the photos there and it loads the frame. I can load about 50MB of digital photo jpegs (using GraphicConverter's browser) when I am prompted that the disk is full. I always make sure the card is cleared before I start and the pane tells me I've got 1.85GB available. My images are only about 500kbs each and I have a total of 400MB to load; should be no problem. I have tried an SD 256MB card to test, same result. Any ideas would be helpful. Thanks!

    Even forum #1 Old Toad had trouble writing to a card for a photo frame. See this thread: http://discussions.apple.com/thread.jspa?messageID=4336916
    You might try adding one photo at a time, like he did, and see if it will work.
    You said you were doing this through Graphic Converter's browser. Is it the same result if you just use the Finder?
    FWIW, I was able to copy about 587 MB of photos to a 1 GB card that already contained 176 MB. The card had been formatted in a camera (not even the same make as my own camera), and I added my pictures to the existing folder structure - to the same folder containing the other photos. It just worked. This leads to the question: How do you format the card for use in the photo frame? Could the card format have to do with the difficulty in writing to it?
    Please let us know if you get an answer from the Coby support guy. You could help a lot of people with this same problem.

  • My ipod 4 fell down to floor and turn to white screen,can't switch on...how can i solve the problem??

    my ipod 4 fell down to floor and turn to white screen,can't switch on...how can i solve the problem??please help me

    That symptom is covered here.  However, you may have a hardware problem caused by the drop. and an appointment at the Genius Bar of an Apple store may be in order.
    iPod touch: Hardware troubleshooting

  • I have a 24" imac model 9,1 running OS 10.6.8 and I am experiencing frequent freezes and crashes.   How can I solve this problem?

    I have a 24" imac model 9,1 running OS 10.6.8 and I am experiencing frequent freezes and crashes.   How can I solve this problem?
    Hal

    As old as your iMac is, have you cleaned out the dust? Dust buildup can lead to over heating issues. Remove any and all things plugged into it including the power cord, Remove the RAM access grille. Vacuum all openings starting with the RAM access area (air intake). Vacuum all ports and plugs, DVD slot and the opening across the top of the rear of the body. Blow compressed air through all your openings and vacuum again to remove any dust you loosend. Reinstall the RAM grille. Plug in the keyboard and mouse if not blue tooth. Insert power cord...
    You are now in a perfect position to do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.
    Here is a link to a Widget to monitor your temps and other operations:
    http://islayer.com/apps/istatpro/
    since you are running 10.6.8 did you install the combo update?
    Mac OS X 10.6.8 Update Combo v1.1
    It is more stable than the regular version.
    You could use your original install disc and boot from the disc, run Disc Utility and do a repair disk.

  • How can i solve this replication problem between TT and ORACLE

    Hi
    I have an application that using AWT cashgroup implement the replication between TT (7.0.6.7) and ORACLE(10g);
    but i encounter this problem:
    16:16:50.01 Err : REP: 2302682: ABM_BAL_WH:meta.c(4588): TT5259: Failed to store Awt runtime information for datastore /abm_wh/abm_bal_ttdata/abm_bal_wh on Oracle.
    16:16:50.02 Err : REP: 2302682: ABM_BAL_WH:meta.c(4588): TT5107: TT5107: Oracle(OCI) error in OCIStmtExecute(): ORA-08177: can't serialize access for this transaction rc = -1 -- file "bdbStmt.c", lineno 3726, procedure "ttBDbStmtExecute()"
    16:16:50.02 Err : REP: 2302682: ABM_BAL_WH:receiver.c(5612): TT16187: Transaction 1316077016/357692526; Error: transient 0, permanent 1
    the isolation level of my date store is read-committed ,and the sys.ODBC.INI file is also set Isolation=1(readcommitted mode)
    so ,I still wonder how the error ORA-08177!
    how can i solve this replication problem?
    thank you.

    I suspect this is failing on an UPDATE to the tt_03_reppeers table on Oracle. I would guess the TT repagent has to temporarily use serializable isolation when updating this table. Do you have any other datastores with AWT cachegroups propagating into the same Oracle database? Or can you identify if some other process is preventing the repagent from using serializable isolation? If you google ORA-08177 there seem to be ways out there to narrow down what's causing the contention.

  • I have 4S , not recharging till i shut it down , how can i solve that ??

    i have 4S , not recharging till i shut it down , how can i solve that ??
    at once it strarted not feeling with the cable , cannot connect with itunes or PC , and also charger . Then i found when it is connectd with PC  and must be  shutdown ,   it recharging again after time .
    How can i fix that ?
    Is it problem in hard or software ?
    Plz help me

    How many years you have your mobile, mine 3 years now but before 3-4 months I replaced the battery as it was giving me such errors ( ex/ Today morning is fully charged, after 6-7 hours when Im outside the phone suddenly turned OFF and if I try to open it, there will be an image in the screen to plug it to the charger but after sometime I can open it and see that it have 50-60% charge) this happened many times so when I replaced the battery this issue never happened again and its ok now with all these apps and daily usage (same battery life as before when was new)

  • My iTunes program has broken letters, How can I solve the problem?

    I bought a new MacBook few days ago.
    I set up my MacBook and then set up ipod.
    On the first day, it had no problem.
    But on the next day, when I launched iTunes, all the letters were not english font, but they were Hebrew and other broken fonts.
    How can I solve this serious problem?

    Welcome to the Apple forums, Samuel.
    How can I solve this serious problem?
    Very simply.
    You have installed an application which has placed its own copy of the font "Lucida Grande" on the hard disk. This copy of Lucida Grande is causing a conflict with the Mac OS X version - Lucida Grande is provided and used by the Mac OS to display text in menu bars and on buttons.
    Open "Font Book" and locate the entry for Lucida Grande. You will see a black dot next to the name - this indicates that the font is duplicated.
    Click the triangle to show all instances of the font.
    Click on "Preview" in the menu bar and choose "Show Font Info" from the drop down.
    Click on one of the instances of Lucida Grande.
    In the info window, look at the entry for "Location". If it does NOT say System/Library/Fonts/Lucida Grande delete it.
    Do not, under any circumstances delete the font if the location shows up as:
    /System/Library/Fonts/Lucida Grande This is the Mac OS X system version.
    Message was edited by: Nick Holmes
    Message was edited by: Nick Holmes

  • How can I solve this nested IView / empty dropdown problem?

    Hello VC experts,
    I've got a VC model with a nested IView that contains drop down lists.
    As long as the nested IView was only used in one place, everything was fine.
    Then I used the nested IView in a second place, and this caused the following problems: After deployment, the dropdowns were empty in the place where the nested IView was already used previously, in the second place everything was OK. The dropdowns display an empty field, and when I click on them as if to select an item it 'drops down' but again there's just one line that is empty, i.e. white.
    Did you experience this before?
    How can I solve this?
    Kind regards,
    Florian

    Hello,
    Just had the idea that I could try posting the .gml file in here. Lets see if that works.
    <?xml version="1.0" encoding="utf-8"?>
    <GMLPACK kit="EP" version="700.11" build="0027" model_name="error_dropdown_nestediview" model_schema_version="1.01" reserved="VisualComposer04"><GMLUNITS><AAA3FUF name="error_dropdown_nestediview" modified="14/01/2008 12:00:37" metadata="LOGLOCATION:" orig_guid="GM127189c0daec11dca6307abae1e458be"><AAD3FUG name="iView 3FUG" parent="AAA3FUF" win_type="SUB" win_scale="AUTO" win_layout="AUTO" win_pattern="STD" win_navigator="STD1" win_caption="true" pos="700 175" author="Public" modified="14/02/2008 12:29:06" orig_guid="GM0c091400daf011dc9e907abae1e458be"><ACA3FUH name="Form1" parent="AAD3FUG" box_style="0" box_features="TTL EDT" box_size="320 160" form_layout="ABS" labels_align="BEFORE" overflow="EXC" pos="550 210" box_pos="8 8" orig_guid="GM0c091401daf011dcbb437abae1e458be" fields="{DD:{type:'10',add:'V',ctl:'8',show:'Y',text:'Dd',dsg:'15',ownEnum:'#ID[AXC3FUK]',useEnum:'#ID[AXC3FUK]',pos:'100 8',size:'120 16'}}"><AEA3FUI name="in" parent="ACA3FUH" role="IN" spec="UI_OBJ_IN" anchor="L15" pos="0 15" orig_guid="GM0c091402daf011dcbc867abae1e458be"/><AEA3FUJ name="out" parent="ACA3FUH" role="OUT" spec="UI_OBJ_OUT" anchor="R15" pos="80 15" orig_guid="GM0c091403daf011dcbf157abae1e458be"/><AXC3FUK name="ENUM[ACA3FUH:DD]" parent="ACA3FUH" enumMap="apple:apple;orange:orange" orig_guid="GM0c091404daf011dcb5a97abae1e458be"/></ACA3FUH></AAD3FUG><AAD3FUL name="iView 3FUL" parent="AAA3FUF" win_type="TOP" win_scale="AUTO" win_layout="AUTO" win_pattern="STD" win_navigator="STD1" win_caption="true" pos="435 235" author="Public" modified="14/02/2008 12:29:06" orig_guid="GM0c091405daf011dcaad47abae1e458be"><ACG3FUM name="iView 3FUG" parent="AAD3FUL" box_style="0" box_features="TTL" box_size="680 328" pos="445 200" box_pos="8 8" trg_unit="#ID[AAD3FUG]" orig_guid="GM0c091406daf011dca6c97abae1e458be" fields="{}"/><ACG3FUN name="iView 3FUG" parent="AAD3FUL" box_style="0" box_features="TTL" box_size="680 336" pos="660 200" box_pos="8 344" trg_unit="#ID[AAD3FUG]" orig_guid="GM0c091407daf011dca0567abae1e458be" fields="{}"/></AAD3FUL></AAA3FUF></GMLUNITS><enums/><IMAGES/><TRANSPORTLOG/></GMLPACK>
    I think if you save this as 'error_dropdown_nestediview.gml' you could reimport it into your model.
    Lets see.
    Best regards,
    Florian

  • AppStore displays permanently an update avaible and there is none really, how can I solve these little problem?

    AppStore displays permanently an update avaible and there is none really, how can I solve these little problem?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Sync with iTunes
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    I myself would live with it before doing the following 
    - Restore to factory settings/new iOS device.

  • HT6195 Big problem with the last security update, how can I solve the problem?

    Yesterday I installed the last system update in my secondary computer, a Macbook Pro (OS 10.8.5, if I remember well), from that moment is impossible to restart it. How can I solve the problem?
    Today Apple is worst than Windows, but is considerably more expensive! I am seriously considering to change to Windows, in less than 3 months I had serious problems with two Apple computers and I changed 4 computers (always Apple) in less than 6 years.

    tmjavier,
    feel free to use whichever operating system best suits your needs. Since this is a user-to-user forum, whether you use OS X or Windows will affect no one’s bottom line here.
    Regarding your MacBook Pro, you can try booting it into Recovery mode by holding down a Command key and the R key as it starts up. Once the  OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it able to reach the login screen now?

  • My Apple TV states in general menu "Activation: failed". What does that mean and how can I solve the problem?

    My Apple TV states in general menu "Activation: failed". What does that mean and how can I solve the problem?

    Hello MichaMuc,
    I found some steps to help resolve the "Activation: failed" error messsage you are getting on your Apple TV:
    Restart your base station or router. Sometimes this is done by turning the router off for a few seconds, and then on again, but check the documentation provided by the manufacturer.
    To restart your Apple TV, press and hold Menu and Menu down/scroll ( - ) for about 6 seconds and then choose Restart from the menu.
    If the issue continues after restarting, reset your router or base station and Apple TV to factory settings
    Reset your base station or router. Use the documentation provided by the manufacturer to reset to factory settings.
    To reset your Apple TV perform a factory restore.
    You can find the full article here:
    Apple TV: Troubleshooting wireless connections
    http://support.apple.com/kb/ht1595
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

Maybe you are looking for