How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Similar Messages

How can i specify the default application to save a read later doc in Instapaper

I have an Instapaper account, so that I can mark some online web pages to 'read later' if I wish to do this. I have successfully put the Instapaper 'Read Later' borkmarklet on the dock of my iMAC.
However, whenever, I come across a web page or blog that I wish to read later, and click the 'Read Later' bookmarklet on my dock, it throws up an error message that reads ' There is no default application specified to open the URL' and so I am now at a dead end.
Can someone explain to me where and how I can find the default application to get round this problem. By the way, I did not find this problem with Instapaper's 'read later' bookmarklet on my old Windows PC, where I was able to store pages for reading later with this app, and also to transfer them automatically to my kindle through the wifi connection at home.
I hope someone can assist... Or is there another way - (apart from Instapaper which worked okay with Windows)- to save web pages for reading later with MAC -
Thanks

This is pretty simple in Safari, in the upper left of Safari you will see an icon that looks like pair of glasses, this is where you collect webpages for you to read later. The feature is called Reading List and looks like:

How can I change the default driver to OracleXADataSource in JDeveloper

Hello,
How can I change the default oracle driver: oracle.jdbc.OracleDriver to oracle.jdbc.xa.client.OracleXADataSource in JDeveloper Studio Edition Version 11.1.1.0.2, Build JDEVADF_MAIN.BOXER_GENERIC_090328.0229.5205.
If I modify the file connections.xml from jdeveloper\system\system11.1.1.0.31.52.05\o.jdevimpl.rescat2\connections in the sense that I change the driver class, then in JDeveloper when I test my connection I have this problem: Test failed: oracle.jdbc.xa.client.OracleXADataSource cannot be cast to java.sql.Driver
Why do I need this XA version of the oracle driver? Well I tried, from a book to reproduce the model of an application: entities, stateless and stateful session beans, mdb, web services and a client to test one part of the model.
And because of the JMS server I need an XA driver.
I deployed to the integrated wls 10.3 and when I test my client, if I use the default driver for the connection the an error message appears tell me either to emulate two-phase commit or to use XA driver.
My application works very well, if I configured in the console of the integrated wls 10.3 a datasource with the same name as my ide/application connection that has for the Driver Class Name: oracle.jdbc.xa.client.OracleXADataSource in the Connection Pool tab.
Thank you.

Open DIsk Utility and in the toolbar select Disk Image. The file selector will open and you'll have to do three things: 1) just as with any file, name it and point the file selector to where you want it to be saved, 2) near the bottom you'll see name - type iWork 2013 and 3) below that select the image size. Click on size, choose custom and type 1500 MB then click on the Create button.
Some time will pass and then you'll see an external disk pop up on your desktop and/or the Finder window sidebar. Drag the three programs into it and eject it like any other external disk. Now delete the programs from your applications window.
Where ever it was you pointed the file selector to you'll see the file you created. Double click on it and the disk image will mount again.

When I opt to "download this as a file" from my email account, Firefox defaults to notepad to open the file. How can I change the default to MS Word?

Question
When I opt to "download this as a file" from my email account, Firefox defaults to notepad to open the file. How can I change the default to MS Word?

Is FF downloading the file as a .txt file? If so, go to "Folder Options" in the windows control panel. Click on the "File Types" tab. Scroll down until you reach the TXT file extension. Look to see what that extension opens with (lower part of panel). It probably shows notepad. Click on the <Change> button. Scroll down until you find "Microsoft Word." Select it and click the <OK> button. That should show the TXT extension is now associated with Microsoft Word. Click the <Close> button at the bottom of the panel.
If FF is downloading the file as any other type, use the same process as above except look for the corresponding extension instead. If the extension is not listed click on the <New> button and create an association using the extension in the file name and then associate it with MS Word.
davewdan

How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?

How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?
I have seen this question asked previously and it seems there is no answer.
I know that one can change each individual web page (that reset defaults back to 100%) and, alternatively and apparently one can load an add-on to fix the default size at Full Zoom.
... But any hints on how to achieve a DEFAULT 125% zoom would be much appreciated.

Press CTRL + 0
Have you tried Firefox's zoom feature? Font size and zoom - increase the size of web pages
You can "zoom" all sites using this add-on: [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
After installing NoSquint, click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
If you don't have the Add-on Bar displayed, you can right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
You can experiment with sizes larger than 125%, but I wouldn't go much higher than 150% unless you have a large high-resolution monitor.
If there are particular sites that still present a problem, feel free to post their URLs.
You can find more information about the zoom features Firefox offers in these articles:
[[Text zoom]] - For zooming text only
[[Page zoom]] - For zooming the whole page (including images etc.)

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

Hi Hannah,
Inspector > Text > Tabs Button > Tab Settings > Default Tabs.
To set a tab stop on the go, click in the ruler.
If you can't see the ruler, Menu > View > Show Rulers.
To set tab stops for lines (paragraphs) you have already typed, select those paragraphs and set them all at once.
Also, have a look at Menu > Pages > Preferences > Rulers.
Regards,
Ian.

:-) How can we change the default file path for Bank file ( dmee ) ?

Hi All,
We encounter a problem.
Electronic bank file ( created after a F110 run ) are created, in an automatic way to the DIR_TEMP directory. ( On the SAP server )
How can we change the default file path for Bank files ( dmee ) ?
We'd like to specify another path.
Thx for your help.
Erwan

Hello,
Make sure that you have created the directory in transaction code AL11 with the help of basis consultants.
You can link your PC directory to the application server.
You can maintain the path whether your file needs to get saved in OBPM4 against your DMEE structure example GB_BACS etc.
If you do not maintain any path in OBPM4, then the file gets saved to temporary directory. If you give the directory path name in OBPM4, then the file gets saved to that directory with numbers 0001, 0002, 0003 etc till it reaches 9999 and reset from the beginning.
If you give the path as well as file name as ABCD, then the file gets generated to that directory folder with ABCD0001, ABCD0002, ABCD0003 etc. till it reaches ABCD9999 and reset from the beginning.
Hope this solves your problem.
Regards,
Ravi

HT1277 how do i specify the default mail account

how do i specify the default mail account if i have more than one accounts?
Not to worry i have found the setting, thanks
Message was edited by: Teli Proto

hmmm.. I've been complaining about this to the engineers for over a year. The storage location should be chooseable as should there also be a backup feature (as in Addressbook and iCal).
for those that want to change this... it would be cool for someone to write a non cryptic, complete 1,2,3 stepped procedure.
That is.. exactly what do you change to what in the mail user preference file? And what do you use to change it.. text edit? "[ ]" heretofor = folder
I would like to change my Mail storage location to the my [Documents] . Using Text Edit, I went into my user [Library], to [Preferences] and opened the com.apple.mail.plist and changed all the ~/Library/mail storage locations to ~/Documents/Mail
lastly I moved the [Mail] that was in the [Library] to my [Documents].
Didn't work. Restarting Mail got me into the guided set a new account (and as far as I can see there IS no way of not taking the guided set up as alledged above). There must be something, some built-in direction other than in the [Preferences] defaulting mail to be saved in the [Library] folder
If someone has done this and been successful.. a 1,2,3.. list would be apprecaited... and please don't leave any details out. Thanks
dual core Intel G5 Mac OS X (10.4.5) Pismo powerbook specialist

How can I change the default city in my calendar?

HOW CAN I CHANGE THE DEFAULT CITY IN MY CALENDAR?

DEFAULTY CITY? CALENDAR? HUH?
I am not quite sure what you are asking, but there's this:
Your location for time purposes is set in System Preferences, Date & Time, Time Zone tab.
If you are using iCal, there is a Time Zone option in iCal Preferences, Advanced.
charlie

How can I change the new tab homepage ?

how can I change the " new tab " homepage

By default Firefox uses a blank page in a new tab. Something you installed changed that to I-PLAY. You need to figure out what changed that, and get rid of it. Start with this. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

When I create a new event, 3 alarms are automatically set. How can I set the default to zero alarms?

What I said above - when I set up a new event three default alarms are set, all for 10 minutes prior to the event. How can I make the default alarm free?
Thanks!
Mark

Hi Mark,
Do you have a default alarm set in iCal's Preferences > General Tab?
Are you syncing via iCloud (if so look here)?
Are you syncing to Google Calendar (if so look here)?
Are you syncing elsewhere?
Best wishes
John M

How can I restore the NEW TAB FEATURE after a 3rd party has taken over?

I downloaded a program and as a consequence my New Tabs Feature was changed to a 3rd party search page. (Funmoods.com)
How can I restore the default New Tabs Feature without losing the information that had been previously saved?

Figured it out.
Thanx

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

http://support.apple.com/kb/ht5621

Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

For sideloaded content the nook pulls the metadata from ePub file itself. I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so no you can't them to behave exactly alike without converting the files.

Mail -- How can I change the default email account from which my messages go, without having to change it each time I draft a message? It currently assumes an email account that I rarely use. Thanks.

How can I change the default email account from which my messages go, without having to change it each time I draft a message? It currently assumes an email account that I rarely use. Thanks.

sorry, but I can't find the mail preference in the latest Yosemite OS. Do you know where I can find it?
Thank you
Don

How can I specify the default tab in a CHM Output?

Similar Messages

Maybe you are looking for