How can I sum up varying values of a field if a condition is true

Hello,
I want to sum up possible different values of a field if a condition is true. For example:
=Sum(IIF(Fields!status.Value = "Open",0, (IIF(Fields!status.Value = "Waiting",0, (IIF(Fields!status.Value = "Closed",0, (IIF(Fields!status.Value = "Completed",0, Fields!status.Value))))))))
I want a numeral count if the values of a field (Fields!status.Value) are Open, Waiting, Closed or Completed.
The code above is giving me an error.
Please help

Thanks again Thomas,
There are four columns: Region, State,
Branch and Total Cases/Branch.
The example below: North region has two states (Northern State A and Northern State B).
Northern State A has two branches: Northern State A (Branch 1) and Northern State A (Branch 2).
Northern State A (Branch 1) has a total of 10 cases, and the breakdown is shown as: 5 open cases + 3 waiting cases + 2 closed cases + 0 completed cases.
I used a tablix matrix in the report. Region, state and branch are in the row groups.
Total Cases/Branch is the calculated field that I had to create so that I can do a sum total of all cases regardless of their status (open, waiting, closed and completed) in each branch.
That is where I get the error.
See below the structure:
Region State
Branch
Total Cases/Branch
North Northern State A Northern State A (Branch 1) Northern StateA (Branch 1) :
5 Open, 3 waiting, 2 closed
and 0 completed cases >
Total = 10.
Northern State A (Branch 2)
Northern StateA (Branch 2) 4
Open, 1 waiting, 2 closed
and 0 completed cases >
Total = 7.
Northern State B
Northern StateB (Branch 1)
Northern StateB (Branch 2)
I want the Total Cases/Branch
column to be a calculated field, it should SUM all cases in each branch if the status of the cases are Open, Waiting, Closed and Completed.
Thanks again

Similar Messages

How can I change the initial value of the field approve_or_reject?

Hello Workflow Gurus
We are using SRM 5.00(SRM SERVER 550) and as per the requirement, I have to make the Reject radio button as default checked on the Approver's screen.
We are using the SAP Standard Workflow WS14500015.
I found out the Standard task TS14508044 (SC approval per Item)which has one field in its container i.e. approve_or_reject ,based on the Initial value of this field , the radio button is behaving...
approve_or_reject EQ 0 i.e. Approve
approve_or_reject EQ 1 i.e. Reject
Now my requirement is to change the initial value of this field from 0 to 1 so that Reject radio button comes as checked by default into this standard SAP workflow task TS 14508044...
Kindly help me and let me know the procedure to change this.
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE CHANGES INTO STANDARD SAP WORKFLOW ???
Thanks and regards
Ankur Goyal
09823448654

Well Iam not much sure about how you are trying to approve the shopping cart workitem b ut last week i faced a similar issue while apporving the workitems I was able to update the contianer element Apporve_or_reject element by using the FM BBP_PDH_WFL_WI_APPROVE and BBP_PDH_WFL_WI_REJECT ... These two fm will take the responsibility of updating the element with respective value as, if you approve the it will be populated with 0 and if you reject the the element will be updated with 1....
Please check the thread where I updated the thread in [SRM Workflows|Problem while approving SC from Blackberry !;
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE
CHANGES INTO STANDARD SAP WORKFLOW ???
Modifying the standard workflow is not recommended.....

How can I pass URL parameter value to text field?

Dear Masters,
I have a text field. I want it to have a value based on the URL parameter, for example:
http://myapplication.net:7777/pls/apex/f?p=102:1:::::P1_RTNUM:9448,P1_EMAILADD:email.add.here
I want the value of the text field = P1_EMAILADD after the form was loaded. Also, please have it read-only.
Thanks a lot.
Edited by: user6368519 on Sep 16, 2009 11:39 PM

Thanks Saad,
Can I email you(I would need your email) for any concerns or just create a new thread for you to look?
This is ok now. I'm sorry but I just marked this one as an "answered" one last time.
Thanks for all the help again I appreciate it. ;)
Thanks,
Aaron
[email protected]

How can I set a specific value for a field, according to the option selected in a previous drop-down menu?

Eg.: I have a drop down menu with the following options: "1,2,3,4,5". What I want to do is the followin: If the option selected is "1" the field "Color" must be filled with "Green", if "2" the field color must be filled with "Red", etc

You can use something like this as the custom calculation script of the color field:
var v = this.getField("Dropdown1").valueAsString;
if (v=="1") event.value = "Green";
else if (v=="2") event.value = "Red";
// etc.
else event.value = "";

10GR2 - How can I load multiple row values into one field?

Hi
Can anyone please help with a problem I'm having with merging data.
The source table has multiple entries for the same Id e,g,
ID Code
1 123
1 234
2 123
2 567
The output should only have one row per ID e.g.
ID Code_List
1 123;234
2 123;567
Do you know what operator I could use that would allow me to do this? I've looked at unpivot but I think I would need multiple output fields (one for each Code). I have to concatinate the codes and separate with a semi-colon.
Thanks
GB

Q) Input data
=============
COL_0,COL_4
1235,"G0123,G124,G25,G6"
1236,"G01,G23,G124,G25,G6"
1237,"G0123,G1,G24,G25,G6"
1238,"G,G0123,G124,G25,G6"
1239,"G0123124,G256"
Output
======
TEST_ID,TEST_VAL
1235,G0123
1235,G124
1235,G25
1235,G6
1236,G01
1236,G23
1236,G124
1236,G25
1236,G6
1237,G0123
1237,G1
1237,G24
1237,G25
1237,G6
1238,G
1238,G0123
1238,G124
1238,G25
1238,G6
1239,G0123124
1239,G256
I wrote this procedure...
declare
rcd_cnt number;
test_id123 number;
junk_1 number;
cd_occurences number;
child_count number;
str_abc varchar2(200);
char_pos     number default 0;
cd_temp_str varchar2(50);--:= 'G0123,G124,G25,G6';
begin
select nvl(count(col_4),0) into rcd_cnt from test_ee where col_4 is not null;
for aa in 1 .. rcd_cnt loop
select col_0,rownum rn,nvl(trim(col_4),0) into test_id123,junk_1,cd_temp_str from (select col_0,rownum rn,col_4 from test_ee where col_4 is not null) where rn = aa;
--dbms_output.put_line('...I am in for loop...' || cd_temp_str);
     --dbms_output.put_line('===================' || rcd_cnt || '.................' ||aa);
cd_occurences := length(cd_temp_str) - length(replace(cd_temp_str,','));
dbms_output.put_line(cd_temp_str || '...Str Occurences are ...'||cd_occurences ||'**************'||test_id123);
child_count :=0;
for z in 1..length(cd_temp_str)+1 loop
child_count := child_count+1;
     if(instr(cd_temp_str,',') > 0) then
     char_pos := instr(cd_temp_str,',',1,1);
          str_abc := substr(cd_temp_str,1,char_pos-1);
     dbms_output.put_line('..Partial String of..'|| z ||'..is.....' || str_abc);
          insert into test_xx(test_id,test_val) values(test_id123,str_abc);
     end if;
     cd_temp_str := substr(cd_temp_str,char_pos+1,length(cd_temp_str));
     if(cd_occurences=child_count) then
     dbms_output.put_line('..Partial String of..is.....' || cd_temp_str);
          insert into test_xx(test_id,test_val) values(test_id123,cd_temp_str);
     end if;
end loop; -- close for of z */
--dbms_output.put_line('...I am in end for loop...');
     end loop; -- close for of aa
end;
instead of procedure,is there any way from sqlqery.

How can I display only one value of a field with two or more values?

Post Author: skiabox
CA Forum: Crystal Reports
I have a field in my report with 2 or more values (depending of another field id).For example for id = 1 the report gives me 2 names in that field.For id = 3 the report gives me 3 names in that field.I want to display only one of these names in the id row.The selection of name is random.Thanks!

Hello Tim, would barely fit in this situation since this code resides on the client’s interaction side of things. I’d recommend using JavaScript for this matter, e.g. var Data_FName1 = document.getElementById(‘Data_FName1’).value;. If you still opt for using CFML, then you’d go for proxying your JavaScript code to a CFC.

How can a user enter a value in the field which is in read mode.

Hi all,
I am creating a badi for the valuation class.when ever i execute the mm02 transaction.if an invalid valuation class is entered,my error message is poping up.but it is coming in the display mode.i should get the valuation class field in the read mode.
Regards,
charita.

Hi Charita,
Use information message instead of Error message.Then it will not give u that field in non-editable mode.
<b>Reward points if it solves ur query or answer is helpful</b>
Thanks
Chinmay

How can we provide list of values for input field?

Hi Sap Experts plz respond this question

we are all ready to help, but you should also spend sometime in explaining what you require. take sometime to explain your requirement.
read this thread to understand what more details we would need to help you
Please read this before you start a topic
Raja

How can I sum the values in a given column on sheet 1 i.e. A1:A50 based on the adjacent columns specific value i.e. B1:B50 = "Living Room" on sheet 2

How can I sum the values in a given column on sheet 1 i.e. A1:A50 based on the adjacent columns specific value i.e. B1:B50 = “Dinning Room” on sheet 2
For Example:
SHEET 1
A
B
$50
Dinning Room
$800
Dinning Room
$300
Kitchen
$1,000
Master Bedroom
$100
Dinning Room
SHEET 2
Display the total SUM amount of each Project based on Sheet 1
Project Name
Total Cost
Dinning Room
$950
Kitchen
$300

Would be a good idea to open iWork Formulas and Functions User Guide and search for the description of the function named SUMIF
The Guide is available for every user thru the Help menu.
Yvan KOENIG (VALLAURIS, France) jeudi 19 mai 2011 17:32:42
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How can I sum up raws? the sum function seems to work for columns only and right now I have to create a separate formula for each raw

How can I sum up raws? the Sum function seems to work only on columns. Right now I have to create a separate formula for each raw

Hi dah,
"Thanks, but can I do one formula for all present and future raws? as raws are being added, I have to do the sum function again and again"
You do need a separate formula for each group of values to be summed.
If the values are in columns, you need a copy of the formula for each column.
If the values are in rows, you need a copy of the formula for for each row.
If you set up your formulas as SGIII did in his example (shown below), where every non-header row has the same formula, Numbers will automtically add the formula to new rows as you add them.
"Same formula" in this context means exactly the same as all the formulas above, with one exception: the row reference in each formula is incremented (by Numbers) to match the row containing the formula.
Here the formula looks like this in the three rows shown.
B2: =SUM(2)
B3: =SUM(3)
B4: =SUM(4)
That pattern will continue as rows are added to the table.
Also, because the row token (2) references all of the non-header cells in row 2, the formula will automatically include new columns as they are added to the table.
Regards,
Barry

How can i sum the columns by condition?

ID Type QTY
1 A 20
2 A 20
3 B 20
I want to some QTY group by A but I also need the ID column to identify the order of row.
How can I sum QTY group by A and the result is sort by ID ?
Thanks you

Whats your expected output?
Is this the below?
Create Table test(id int,[Type] char(1), QTY int)
Insert into test Values(1,'A',20),
(2,'A',20),
(3,'B',20)
SElect *,SUM(qty)Over(partition by Type) From test Order by id
Drop table test

How can i select other column values('-' separated) in group by function

CREATE TABLE EMP (
     EMPNO NUMBER(4) NOT NULL,
     ENAME VARCHAR2(10),
     JOB VARCHAR2(9),
     SAL NUMBER(7)
INSERT INTO EMP(EMPNO, ENAME, JOB, SAL) VALUES (7369, 'SMITH', 'CLERK', 800);
INSERT INTO EMP(EMPNO, ENAME, JOB, SAL) VALUES (7499, 'SMITH', 'SALESMAN', 1600);
INSERT INTO EMP(EMPNO, ENAME, JOB, SAL) VALUES (7521, 'ALLEN', 'SALESMAN', 2400);
In Output I want 3 columns : EMP,SUM(SAL),JOB(hyphenSeparated)
Means i want my output like
First row : SMITH,2400,CLERK-SALESMAN
Second row : ALLEN,2400,SALESMAN
I tried to write following sql : select ename,sum(sal) from emp group by ename
But i want other colummn value in '-' separated. but group by is only allowing agreegated function.
How can i select other column value using group by function.

SQL> select ename,sum(sal), listagg(job, '-') within group (order by job) as job from emp group by ename;
ENAME        SUM(SAL) JOB
ALLEN            2400 SALESMAN
SMITH            2400 CLERK-SALESMANnote: LISTAGG is a feature of 11.2

How can I sum all the amount per line?

HI,
How can I sum all the amount per line?
EXAMPLE:
[code]
                                         TOTAL:
1,000         2,000     5,200            $8,200
400         1,200     6,000             7,600
[/code]
THANKS!!

If you are sure of the number of columns that you are gonna get then you can add them to a variable and display.
total = itab-col1 + itab-col2 + itab-col3.
If you dunno how many columns will come , you have to use field symbols.
Say the datatabse table has 16 columns which will contain your price and you have to calculate the sum of all those , then assign them to field symbols and calculate.
Have a look at the following code.
FORM GET_VALUES_FROM_COSS .
FIELD-SYMBOLS: <FS1> TYPE ANY.
DATA: V_COMPONENT1 TYPE I.
V_COMPONENT1=31. " your field of table from which amount field starts
Cumulate the posting values of all the 16 period buckets as to get
total production order cost. This is to handle the partial posting of
production order values in different periods.
DO 16 TIMES.
    ADD 1 TO: V_COMPONENT1.
    ASSIGN COMPONENT V_COMPONENT1 OF STRUCTURE COSS TO <FS1>.
    IF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR1.
      ADD <FS1> TO I_FINAL-PL_LABCOST.
    ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR1.
      ADD <FS1> TO I_FINAL-ACT_LABCOST.
    ELSEIF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR2.
      ADD <FS1> TO I_FINAL-PL_MATCOST.
    ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR2.
      ADD <FS1> TO I_FINAL-ACT_MATCOST.
    ELSEIF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR3.
      ADD <FS1> TO I_FINAL-PL_OPCOST.
    ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR3.
      ADD <FS1> TO I_FINAL-ACT_OPCOST.
    ELSEIF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR4.
      ADD <FS1> TO I_FINAL-PL_FACCOST.
    ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR4.
      ADD <FS1> TO I_FINAL-ACT_FACCOST.
    ELSEIF COSS-WRTTP EQ '05' AND COSS-KSTAR EQ C_KSTAR5.
      ADD <FS1> TO I_FINAL-PL_LABCOST.
    ELSEIF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ C_KSTAR5.
      ADD <FS1> TO I_FINAL-ACT_LABCOST.
    ELSEIF COSS-WRTTP EQ '05'.
      ADD <FS1> TO I_FINAL-OTHER_PL_COST.
    ELSEIF COSS-WRTTP EQ '04'.
      ADD <FS1> TO I_FINAL-OTHER_ACT_COST.
    ENDIF.
ENDDO.
ENDFORM.                    " GET_VALUES_FROM_COSS
Let us know if u need more inputs

How can I sum durations in Numbers 3.1?

How can I sum durations in Numbers 3.1?

"For some crazy reason, that worked!"
The "crazy" reason was that 0h 0m can'r be mistaken for the time part of a Date and Time value. If you give Numbers values that are clearly durtations, no matter what format the cell is set to, then Numbers will interpret those value correctly.
Regards,
Barry

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

How can I sum up varying values of a field if a condition is true

Similar Messages

Maybe you are looking for