How can I transcribe a voicemail  to text o my iphone?

how can Itranscribe a voicemail message to an text or an email?

You can start by not using all caps - using all caps on the internet is considered as SHOUTING and hopefully you didn't intend to be shouting at all those who read your post.
When you say case, do you mean the iPhone casing itself?
If so, you can contact AppleCare for a quote to repair this damage which won't be cheap. I believe there are some 3rd party repair facilities available that will do the same won't be cheap but maybe somewhat less than what Apple will charge.
Or purchase a case for the iPhone to cover the dents and scratches and to protect it from additional damage with future drops.

Similar Messages

  • How can I backup all of the texts on my iPhone to iMessage on my Mac?

    I want to transfer every text on my iPhone, since the beginning of time, onto my Mac in an easily synced and accessible way. I want to use iMessage on my Mac to store all of the texts on my phone.
    Eventually, I want to hold only a month/week's worth of texts on my iPhone to save space.

    Text (SMS) cannot be mixed with iMessage.
    You can do a backup using iTunes where your SMS and iMessage will be included but you can't be selective on what you want to restore. It's all or nothing. Furthermore the backup cannot be read without a 3rd party tool.
    Backup
    iTunes http://support.apple.com/kb/ht4946

  • How can I turn off Respond with text option on iphone 5s

    I would like to disable the respond with text option, several times while taking the phone out of my pocket I responded to call I wanted to answer

    Try this:
    Go to Settings/General/Passcode lock/ Allow access when locked/disable
    Reply with message

  • How can i  change the column label text in a alv table display

    how can i change the column label text in a alv table display??
    A similar kinda of question was posted previuosly where the requirement was the label text was needed and following below code was given as solution :
    <i>*  declare column, settings, header object
    DATA: lr_column TYPE REF TO cl_salv_wd_column.
    DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
    DATA: lr_column_header type ref to CL_SALV_WD_COLUMN_HEADER.
    get column by specifying column name.
    lr_column = lr_column_settings->get_column( 'COLUMN_NAME1' ).
    set Header Text as null
    lr_column_header = lr_column->get_header( ).
    lr_column_header->set_text( ' ' ).</i>
    My specific requirement is i have an input field on the screen and i want reflect that value as the column label for one of the column in the alv table. I have used he above code with slight modification in the MODIFYVIEW method of the view since it is a process after input. The component gets activated without any errors but while run time i get an error stating
    <i>"The following error text was processed in the system CDV : Access via 'NULL' object reference not possible."</i>
    i have checked in debugging and the error occured at the statement :
    <i>lr_column = lr_column_settings->get_column( 'CURRENT_YEAR' ).</i>Please can you provide me an alternative for my requirement or correct me if i have done it wrong.
    Thanks,
    Suri

    I found it myself how to do it. The error says that it is not able to find the reference object i.e  it is asking us to refer to the table. The following piece of code will solve this problem. Have to implement this in WDDOMODIFYVIEW method of the view. This thing works comrades enjoy...
      DATA : lr_cmp_usage TYPE REF TO if_wd_component_usage,
             lr_if_controller  TYPE REF TO iwci_salv_wd_table,
             lr_cmdl   TYPE REF TO cl_salv_wd_config_table,
             lr_col    TYPE REF TO cl_salv_wd_column.
      DATA : node_year  TYPE REF TO if_wd_context_node,
             elem_year  TYPE REF TO if_wd_context_element,
             stru_year  TYPE if_alv_layout=>element_importing,
             item_year  LIKE stru_year-i_current_year,
             lf_string    TYPE char(x),
      DATA: lr_column TYPE REF TO cl_salv_wd_column.
      DATA: lr_column_header TYPE REF TO cl_salv_wd_column_header.
      DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings.
    Get the entered value from the input field of the screen
    node_year  = wd_context->get_child_node( name = 'IMPORTING_NODE' ).
    elem_year  = node_year->get_element( ).
      elem_year->get_attribute(
       EXPORTING
        name = 'IMPORT_NODE-PARAMETER'
       IMPORTING
        value = L_IMPORT_PARAM ).
      WRITE L_IMPORT_PARAM TO lf_string.
    Get the reference of the table
      lr_cmp_usage  =  wd_this->wd_cpuse_alv( ).
      IF lr_cmp_usage->has_active_component( ) IS INITIAL.
        lr_cmp_usage->create_component( ).
      ENDIF.
      lr_if_controller  = wd_this->wd_cpifc_alv( ).
      lr_column_settings = lr_if_controller->get_model( ).
    get column by specifying column name.
      IF lr_column_settings IS BOUND.
        lr_column = lr_column_settings->get_column( 'COLUMN_NAME').
    set Header Text as null
        lr_column_header = lr_column->get_header( ).
        lr_column_header->set_text( lf_string ).
    endif.

  • How can I disable the Voicemail button on an iPhone 4

    How can I disable the Voicemail button on an iPhone 4 or
    if that is not possible can i programme it to dial my own phone rather than my carrier's Voicemail box?

    No, it's not possible to disable that button and no, it's not possible to reprogram it to anything else.

  • How can I disable e-mail and text messages when I'm close to or over my data quota ?

    How can I disable e-mail and text messages when I'm close to or over my data quota ?
    Is this possible? I don't see any options?
    All I see is this:
      Receive confirmations of many account transactions via Email and/or free Text Alerts delivered right to your cell phone. You can receive these confirmations for  
       transactions done online, over the phone or from your handset. Account management Text Alerts do not count against any Messaging allowances.
          Your bill is ready for review.
         Payment Confirmations: Your payment has been  received    Your credit/adjustment     has been applied.1
         Account Activity Confirmations     Plan changes     Feature changes1

    What phone?
    You would need to disable data on the phone itself.  You wouldn't do it online on your account.
    Note also that text messages do not count toward your data allowance.

  • How can I print a selection of text?

    In Mail (in Mavericks).  I would like to print just a paragraph or two that I have selected (highlighted).  How can I print just that selected text and not any other text or headers in that email?  I know I can copy and paste the text into a Text Edit document, but I'm looking for a quicker way to print just that selected text without leaving Mail.

    Create an Automator action that gets the selected text and automatically creates the TextEdit document and prints:
    To make the Service, create a New Automator workflow and select Service as the type.
    Set it to receive selected text in any application.
    Drag in a New TextEdit Document action
    Drag in a Run Applescript Action.
    Set the applescript to this:
    on run {input, parameters}
              tell application "TextEdit"
      print document of front window
      close document of front window without saving
      quit
              end tell
              return input
    end run
    Save it as something like Print Selected Text. Then, you can select text, ctrl-click on it, then select Print Selected Text from the Services submenu of the contextual menu.
    Here is a picture of the workflow:
    You could also give it a shortcut in the Keyboard System prefs, Shortcuts tab:

  • How Can I Set a Default Placeholder Text Language?

    How can I set a default placeholder text language instead of having to set the language every time I use placeholder text?

    Steve Werner wrote:
    I think the default placeholder text language is the language of your version of InDesign.
    The placeholder text is based on the current language setting. So if the language under the cursor is Hebrew, you'll get Hebrew.

  • How can I copy a paragraph of text from a Kindle book on the iPad?

    I just purchased a book to read on the Kindle app on my iPad.
    I would like to copy a paragraph of text to email to someone or to possibly quote in a blog post.
    How can I copy a paragraph of text from a Kindle book on the iPad?

    I'm very late to the conversation but thought I'd chime in since I've just been dealing with this myself. One way to copy from Kindle books is to make sure that you have your settings to backup highlights etc. online, then highlight the text in the Kindle app, go to your Kindle webpage (https://kindle.amazon.com/your_highlights) and copy the text from there.
    Remember, to be able to do this you have to set the app to backup highlights etc. I think this is set individually for each book. On my iPad the default is to backup.

  • How can i recover my voicemails after updating my iPhone?

    How can i recover my voicemails after updating my iPhone?

    When one restores an iPhone from its own backup, visual voicemail is also restored. However, when one restores a new iPhone from a backup from a previous phone, the voicemails fail to restore. This occurred between my 3G to 4s, and again from the 4s to a 5s. Restoring the 4s once from its own backup resulted in voicemail recovery.
    My only explanation is that when a different SIM card is used, voicemails cannot restore as one would otherwise expect. Perhaps voicemails are inexplicably tied to their SIMs. Unfortunately, newer models of iPhones tend to use exceedingly different sizes, rendering one possible fix unpursuable. iBackupBot is the other possible solution: you can extract the voicemails from the backup and restore them onto the new iPhone individually.

  • HT3529 How can I retrieve a train of text messages back to October 1, 2013, that I deleted?

    How can I retrieve a train of text messages back to October 1, 2013, that I have deleted?

    For text messages that were transmitted through your cellular connection, you must contact your wireless carrier.  For iMessage texts that you have deleted, your decision at that time was final.

  • How can i change the sequence of text element in standard driver program ?

    Hi,
    can u tell me how can i change the sequence of text element in standard  sapscript driver program.. without making a zcopy of standard driver program.
    My problem is when MEDRUCK form is getting printed for PO print , header text is coming before item. But the requirement is to come it after item.So how cani do that without making the zcopy of  SAPLMEDRUCK program..Is there any enhancement point in SAPLMEDRUCK driver program..where i can put my customise code for changing the sequence of text element ?

    Hi,
        Just copy the MEDRUCK to ZMEDRUCK. No need to copy the driver program.
    1) SE71Menu > Utilities > COpy from Client
    MEDRUCK ->>Client 000
    New formname ZMEDRUCK
    2) Now open the ZMEDRUCK in DE language in SE71
    3) Menu > Utilities > Convert original Language
    Change DE  to EN, save and activate
    4) Now open the ZMEDRUCK in EN language
    5) Goto Pagewindows > Main window,
    Look for the HEADER text Text element, copy the whole code under this Text element just after the ITEM text Text element, and comment the HEADER text above.
    Now the Header text Text element will be below ITEM text only. This will full fill your requirment.
    Now goto NACE transaction and add the copied ZMEDRUCK to the EF application.
    Regards
    Bala Krishna

  • How can I transfer my voicemails onto new device ?

    How can I transfer my voicemails onto new device ? Is it possible?

    Yes, you would need to restore new one from backup of the old one.
    Instructions here
    http://support.apple.com/kb/ht2109

  • How can u find SRM error message texts?

    hi friends
    How can u find SRM error message texts?
    thanks
    regards
    chinna

    Hi,
    There are several ways.
    1. Go to BBP_PD and open the document. Select the link "Check again" in the bottom area.
    2. Go to SE17 and serch it from table T100.
    3. Go to SE91.
    Regards,
    Masa

  • How can I turn off voicemail but allow calls in my iPhone 4s?

    How can I turn off voicemail but allow calls in my iPhone 4s?

    Voicemail is a carrier feature, so contact your carrier.

Maybe you are looking for