How can I turn a text file to a String?

just a line,when meets line seperator,
use a space to replace it,
all in all, I wanna a string without any
carriage return

BufferedReader in = new BufferedReader(new FileReader("test.txt"));
StringBuffer sb = new StringBuffer();
String s;
while ((s = in.readLine()) {
sb.append(s).append(" "); // space instead of \r\n
s = sb.toString();
System.out.println(s);It also appends a space to the last line it reads from the file, so you may want to remove the last character.

Similar Messages

How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?

How can i turn a photoshop file into a website with knowing code? can i upload Muse or DreamWeaver?
I created a few images (pages for a site) on photoshop and want to turn them into HTML code for a website- Can i Just upload the file into one of these programs and make a file with the correct code imediatly?
I was reading about using EDGE Reform but i did not understand if i can create the code with it, in the end it says it still needs to be sent to website developer after?

You need to look at Dreamweaver as a code editor. You need to learn to create good, clean HTML code with style sheets to make websites with Dreamweaver.
There are tutorials that will take you from a layered .PSD file to HTML. Here's a good one:
http://net.tutsplus.com/tutorials/site-builds/from-psd-to-html-building-a-set-of-website-d esigns-step-by-step/
Adobe's Muse is a semi-WYSIWYG website layout creator for small websites (1-5 pages). But there is no way you can go from a .PDS file to Muse, you have to start the site in Muse.
I have seen a few Muse sites and they're OK, but there is some code that Muse creates that is kind of odd. If you want a good, clean website that will work for you or your business, Dreamweaver is the best choice. Alternatively, you could hire a pro.
-Mark

How can I turn off text messages from my iPod touch

How can I turn off text messages from my iPod touch

Go to Settings>Messages and turn off.

How can I turn garage band files into mp3s?

On my older Macbook i have always been able to easily turn my .band files into mp3s under the Advanced heading in itunes, but with my Macbook Pro, that is not an option. The option has become "Create AAC version". How can I turn my .band files into mp3s so that I can load them onto my web page and my students can pick them up as mp3s and put them on their devices?

The option has become "Create AAC version".
Your iTunes importing preferences are currently set to AAC. If you change your Importing preferences to mp3, the option should then become "Create mp3 version". See the following document for some more details:
iTunes: How to convert a song to a different file format

How can i turn off text messages from coming on my iMac

how can i turn off text messages from coming on my imac

Go to Messages->Preferences->Accounts and in the section labeled You can be reached for messages at: make sure only you telephone number is checked. Uncheck any email addresses that are checked.
You mat have to do this on the iPhone also, I'm not sure.
regards

How can i read the text files and buffer the data in Vector?

hi. I have been running into this problem for days, but with no luck and losing right direction.
The problem is : I am trying to read a text file and buffer the data into a
Queue for each user.
the sample text file is as below:( 1st column is timestamp, 2nd is user_id, 3rd is packet_id, 4th is packet_seqno, 5th is packet_size)
0 1 1 1 512
1 2 1 2 512
2 3 1 3 512
3 4 1 4 512
4 5 1 5 512
5 6 1 6 512
6 7 1 7 512
7 8 1 8 512
8 9 1 9 512
9 10 1 10 512
10 1 2 11 512
11 2 2 12 512
12 3 2 13 512
13 4 2 14 512
14 5 2 15 512
15 6 2 16 512
16 7 2 17 512
17 8 2 18 512
18 9 2 19 512
19 10 2 20 512
20 1 3 21 512
21 2 3 22 512
22 3 3 23 512
23 4 3 24 512
24 5 3 25 512
25 6 3 26 512
26 7 3 27 512
27 8 3 28 512
28 9 3 29 512
29 10 3 30 512
30 1 4 31 512
31 2 4 32 512
32 3 4 33 512
33 4 4 34 512
34 5 4 35 512
35 6 4 36 512
36 7 4 37 512
37 8 4 38 512
38 9 4 39 512
39 10 4 40 512
40 1 5 41 512
41 2 5 42 512
42 3 5 43 512
43 4 5 44 512
44 5 5 45 512
45 6 5 46 512
46 7 5 47 512
47 8 5 48 512
48 9 5 49 512
49 10 5 50 512
50 1 6 51 512
51 2 6 52 512
52 3 6 53 512
53 4 6 54 512
54 5 6 55 512
55 6 6 56 512
56 7 6 57 512
57 8 6 58 512
58 9 6 59 512
59 10 6 60 512
60 1 7 61 512
61 2 7 62 512
62 3 7 63 512
63 4 7 64 512
64 5 7 65 512
65 6 7 66 512
66 7 7 67 512
67 8 7 68 512
68 9 7 69 512
69 10 7 70 512
70 1 8 71 512
71 2 8 72 512
What I wanna do is to read all the data above and buffer them in a queue for each user( there are only 10 users in total).
I already created a class called Class packet:
public class packet {
    private int timestamp;
    private int user_id;
    private int packet_id;
    private int packet_seqno;
    private int packet_size;
    /** Creates a new instance of packet */
    public packet(int timestamp,int user_id, int packet_id,int packet_seqno, int packet_size)
        this.timestamp = timestamp;
        this.user_id=user_id;
        this.packet_id=packet_id;
        this.packet_seqno=packet_seqno;
        this.packet_size=packet_size;
}then I wanna to create another Class called Class user which I can create a queue for each user (10 users in total) to store type packet information. the queue for each user will be in the order by timestamp.
any idea and sample code will be appreciated.

Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

How can i insert the text file in a hashSet???

Hi, here's the code to feed the text file into the program, i need to put the words from the text file into a hashSet, im not too sure how to go about doing this, can anyone help please?
import java.io.*;
public class FileIn {
BufferedReader in;
public FileIn() {
try {
in = new BufferedReader(new FileReader("\\C:\\Program Files\\java.txt\\"));
String line = in.readLine();
System.out.println(line);
in.close();
} catch(IOException ioe) {
System.out.println(ioe.toString());
public static void main(String args[]) {
FileIn newFile = new FileIn();
}

First you need to break each line into words. You'll need to decide on your rules for doing that. A simple approach would be to just break on whitespace. This assumes there are no hyphenated words at the end of a line. You'll also want to strip out punctuation.
Once you've got a word (or an array of them, if you used String.split), then just iterate over it and call HashSet.add for each one. There might even be a helper function in java.util.Arrays or java.util.Collections or in HashSet to add everything from an array.
http://java.sun.com/docs/books/tutorial/collections/

Please, I need help - How can I generate a text file with Word format?

Hello friends at www.oracle.com ,
is it possible for me to create a text file - that is, with TEXT_IO.fopen, and so on - that's already formatted as a Word document?
We have a Forms program here, where it's needed to generate a text file with .RTF format, 8 centimeters margin, Times New Roman font, with size 7.
Best regards,
Franklin Goncalves Jr.

Hello Shay,
sincere thanks for your answer. And, to answer your last question, I'm using client-server model.
Since I couldn't create this .RTF file by using built-ins like TEXT_IO, I tried to generate an .RTF file using Reports, passing the parameters DESTYPE, DESNAME and DESFORMAT, as shown below.
add_parameter (pl_id, 'DESTYPE', text_parameter, 'FILE');
add_parameter (pl_id, 'DESNAME', text_parameter, 'c:\franklin.rtf');
add_parameter (pl_id, 'DESFORMAT', text_parameter, 'RTF');
However, the just generated .RTF file is uncomprehensible. After opening the file at Microsoft Word, I can see the following message at the top of file:
This file was created by Oracle Reports. Please view this document in Page Layout mode.
... and informations doesn't appear as desired.
If I can't generate such text format by using TEXT_IO, and if generating an .RTF file through Reports shows me an incomprehensible result, how can I export the selected result to an .RTF file?
When Reports is opened, choosing Generate to file -> RTF doesn't export anything.
Thanks, and best regards,
Franklin Goncalves Jr.

How can I write to text file colorful texts

I save system events in a text file,for example when system give warning message i want to write it red

As others have mentioned, if you want to view text in different colors with an viewer/editor tool outside of LabVIEW, you must provide the necessary formatting for that tool.
If it works for your application to view the file using LabVIEW you can do this:
1) Place a unique key in each line that identifies an error.
2) Display the text in a Listbox and color each line based on that unique key.
You can fairly easily provide a stand alone viewer if needed.
This technique can also be expanded to provide multiple colors.
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.

How can I save a text file to disk from Illustrator ?

Hi,
I was looking through the Javascript reference and couldn't find anything related to writing strings to a text file on disk.
Is this possible ? If so where should I look ?
Otherwise, can I run a bit of code in Terminal/CommandPrompt from Illustrator (.e.g. echo 'Hello!' >> file.txt) ?

Here's something that I think Muppet Mark or Carlos Canto posted earlier
#target illustrator
var textFile = File('~/Desktop/AI.txt');
var doc = app.activeDocument;
var docText = '';
for (var i = 0; i < doc.textFrames.length; i++)
docText += doc.textFrames[i].contents + '\r';
textFile.open('e');
textFile.write(docText);
textFile.close();

How can i feed a text file into a Hashtable?

Hi,
im working on my third year project, im new to java and am struggling a little with writing the code.
I need to feed a text file into my program and insert it into a hashtable. I presume i'll be using an input stream to feed the file in, how do i go about placin the text file into a hashtable??
please help!

ok, so im trying to code an authorship attribution
program. the first part of the program need to
compare a text file A (list of words), with another
two text files B and C. Compare how? Do you want to know how many times certain words from list A appear in files B and C?
The words in list A will first be compared to those
in list B and than list C. I was wondering if there
was a way of inserting file A,A Map is a list of key/value pairs, so what do you mean by inserting here? What are you inserting? What would the keys and values here be?
followed by B,
comparing the two files.....than inserting file C and
comparing it with A??
Does this make sense??Not quite, but it might just be me.

How Can I Make a Text File that Lists Files in a Finder Folder?

I would like to email lists of files in my various Finder folders. I have Mac OS X (10.4.6). Finder works nicely, but I cannot figure out how to save a list of file names. Can I get advice? Thank you.

I'd like to thank "roam" for the link http://www.searchwaresolutions.com which opened a site for "printwindow" for Mac OS. Wow!! That was easy! It's a free download for the standard product which luckily worked for me. After downloading PrintWindow, and putting it in my Applications and reading PDF instructions, I opened PrintWindow and clicked "File". Then I chose "Print Folder Listing", clicked that and see "Print Listing" of all my Mac's folders. Then, I selected the folder for which I wanted the file names listed on paper. Then it opens a Print Options menu. I clicked Print. Then, a "Page Setup" menu appears. I clicked "OK". Then a "Print" menu appears. On the "Print" menu, there is a PDF options menu!! On that, there is a "Save as PDF"!! I clicked "Save as PDF" and then there is a small "Save" menu where I typed a new file name and the folder in which I wanted the listing saved. It worked! Thank you.

How can I read a text file inside the .xsjs?

I need to read line by line of a text file just like FileReader and BufferedReader in Java. It contains a script SQL to insert data in my DB. Can I use some API?

There is no API that allows you to access the file system of the server in XSJS. You would need to upload the file from the client side and it will appear as a array buffer in the request object. From there you can convert the array buffer to a string and process however you like.
For example:
var content = "";
    content = $.request.body.asArrayBuffer();
    var array = new Uint8Array(content);
    var encodedString = String.fromCharCode.apply(null,array),
         decodedString = decodeURIComponent(escape(encodedString));
        content = decodedString;
    var lines = content.split(/\r\n|\n/);

How can FMS create a text file and write data into it in the Server application folders?

Recently, I writed a programe about creating a text file and writing data into it in the server application folder. My code is as following:
           var fileObj = new File("/MyApp/test.txt");
           if( fileObj != null)
                  if(fileObj.open( "text", "append"))
                        fileObj.write( "                                                      ———— Chat Info Backup ————\r\n" );
                        fileObj.close( );
                        trace("Chat info backup document :" + fileObj.name + " has been created successfully!");
But when I run it, FMS throw the error as following: File operation open failed ; TypeError: fileObj has no properties.
Can you help me ? Thanks in advance.
Supplement: The text file named test.txt doesn't exist before create the fileObj, an instance of File Class.

Is MyApp the name of the application directory, or is it a child of the application directory? If myApp is the app name, just use test.txt as the path flag in the file constructor.

How can I read only text files in a directory.

I've written a program to read files in a directory but I'd like for it to only read the text files of that directory.
import java.io.*;
public class Data {
public static void main(String[] args) throws IOException {
String target_dir = "C:\\files";
File dir = new File(target_dir);
File[] files = dir.listFiles();
for (File textfiles : files) {
if (textfiles.isFile()) {
BufferedReader inputStream = null;
try {
inputStream = new BufferedReader(new FileReader(textfiles));
String line;
while ((line = inputStream.readLine()) != null) {
System.out.println(line);
} finally {
if (inputStream != null) {
inputStream.close();

You have mentioned you want to read only text files.
If you are referring to some specific set of extentions, you can filter based on that.
ex: you want to read only .txt files, you can add an if condition as below :
if(textfiles.getName().endsWith(".txt")) {
// Add your code here
Cheers
AJ

How can I turn a text file to a String?

Similar Messages

Maybe you are looking for