How can I "unrevision" a script?

I've went through a couple of revisions on my script and want to start new with all existing revisions collpsed into a new version.
So no different colors and almost blank pages.
All the best,
Jochen

The following will create the createtables.sql script:
set pages 0
set echo off
set feed off
spool createtables.sql
select 'create table '||table_name||' as select * from '||table_name||'@windb.us.oracle.com;'
from [email protected]
spool offMax
[My Italian Oracle blog| http://oracleitalia.wordpress.com/2010/02/07/aggiornare-una-tabella-con-listruzione-merge/]

Similar Messages

I have two script. one for indesign and another for photoshop. how can i merge both scripts?

hi all,
i have one script for indd which convert a user selected table as JPG (1276 px width, height varies). Second photoshop script which ask user to select jpg file and then check if pixel height is less than 1018 pixel, then it enlarge canvas size(height) to 1018 px.
how can i combine both script, any tip or how to start would be helpful? The workflow should be:
user select the table in indd document
table export as jpg
script will ask to select table jpg file or if it can be automated too that would be good.
enlarge canvas height to 1018 px
thanks
virender
PS: i already read the Java scirpt tool guide pdf but unable to understood

Hi,
I see two possible approaches here. The most logical would be to use a BridgeTalk Object that let you execute another app js code inside yoru primary app. In your case, you start your script from within InDesign and at some point the Photoshop specific script is executed thanks to the BridgeTalk Object.
Other option is to use either AppleScrip or VB to execute the codes while targeting the specific app.
Eventually, you may have your PS code in some external file and call $.evalFile when of course the file has a target instuction as Peter exposed.
Once again, I think what you need is BridgeTalk.
FWIW,
Loic
http://www.ozalto.com

How can I install asian script for language support for bangla in safari and install a font??

how can I install asian script for language support for bangla in safari and install a font? Some websites are working fine in ipad and iphone4 but not in mac osx supported imac or macbook. Example: www.sonarbangladesh.com.

You just need to install a font, like one of these:
https://sourceforge.net/projects/onkur/
http://www.ekushey.org/?page/osx
For non-Unicode sites, see
http://m10lmac.blogspot.com/2011/04/reading-non-unicode-indic-language-web.html

How can I write a script for set left indent?

In three cases as below:
for example:
left indent:8mm; first indent:0mm
left indent:0mm; first indent:8mm
left indent:8mm; first indent:-8mm
How can I write a script to tell Indesign, wherever the text indent is, each time when I run the script once, the text can put just a step rightward, and “one step = 8mm”.
Please!

Hi, Trevor
I use change by list as below:
grep {leftIndent:48mm} {leftIndent:56mm}
grep {leftIndent:40mm} {leftIndent:48mm}
grep {leftIndent:32mm} {leftIndent:40mm}
grep {leftIndent:24mm} {leftIndent:32mm}
grep {leftIndent:16mm} {leftIndent:24mm}
grep {leftIndent:8mm} {leftIndent:16mm}
grep {firstLineIndent:8mm, leftIndent:48mm} {firstLineIndent:8mm, leftIndent:56mm}
grep {firstLineIndent:8mm, leftIndent:32mm} {firstLineIndent:8mm, leftIndent:48mm}
grep {firstLineIndent:8mm, leftIndent:24mm} {firstLineIndent:8mm, leftIndent:32mm}
grep {firstLineIndent:8mm, leftIndent:16mm} {firstLineIndent:8mm, leftIndent:24mm}
grep {firstLineIndent:8mm, leftIndent:8mm} {firstLineIndent:8mm, leftIndent:16mm}
grep {firstLineIndent:-8mm, leftIndent:48mm} {firstLineIndent:-8mm, leftIndent:56mm}
grep {firstLineIndent:-8mm, leftIndent:32mm} {firstLineIndent:-8mm, leftIndent:48mm}
grep {firstLineIndent:-8mm, leftIndent:24mm} {firstLineIndent:-8mm, leftIndent:32mm}
grep {firstLineIndent:-8mm, leftIndent:16mm} {firstLineIndent:-8mm, leftIndent:24mm}
grep {firstLineIndent:-8mm, leftIndent:8mm} {firstLineIndent:-8mm, leftIndent:16mm}
but not that perfect,
I want to useing jave "if{}" or "for{}" to write this script, but I don't kown the syntext.

HT1338 how can i update java script

how can we update java script on our mac book?

Apple supplies their own version of Java.
Try Software Update.

How can i run unix script from my apex page

how can i run unix script from my apex page and take the output of unix script as a hidden variable and display it on the report region of that page

I had a requirement to run a Fortran program against some data that woudl be extracted from the database after the user set up their filtering criteria and made some additional input. SInce the program was to complex to conver to PL/SQL, we decided to try and invoke it from Apex. This is how I did it.
1. I followed the steps in Tim Archer's excellent article "Oracle External Procedure to Run Host Commands" (http://www.timarcher.com/?q=node/9). If the link does nto work, google the article's title.
Using this steps I created a function which accepts any OS command, including calling my own shell scripts, and runs them. I called my PL/SQL function "shell" instead of "USF_RUN_HOST_CMD " as Tim did in his example (step 9).
2. In Apex,
a. I created a button to run my shell command. (I named it P2_RUN_SHELL)
b. I created a PL/SQL process whose source looks as follows:
shell('/home/ackness/scripts/cr_xcf_file.sh > /tmp/cr_scfp_file.log');
and which was conditioned on the the button P2_RUN_SHELL.
It works like a charm.
Note: since you can run your own scripts using this method, you can encapsulate a series of commands in a UNIX shell script and invoke that script from Apex. This allows you to be able to test or run you commands from the command line as well as Apex and makes it easier to develop/debug/enhance the scripts in the future.
Ackness

How can I change this script so it doesn't load into a new window?

I have this script on an invisible button on a banner ad, but the client doesn't want the linked page to open in a new window, but rather load over the page in same window. How can I change the script to accomplish this, thanks!
link_btn.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);
function mouseDownHandler(event:MouseEvent):void {
navigateToURL(new URLRequest("http://www.sdesignsstore.com/store.html"));

Try...
navigateToURL(new URLRequest("http://www.sdesignsstore.com/store.html"), "_self");

How can I disable java scripts permanently in iPad

How can I disable java scripts permanently in iPad ? When I access web site with smart app banner, than I get javascripts enabled automatically .

I do it exactly there , after I go to web site where is smart app banner and it enables javascripts its self. After wisiting that web site ,I go to settings>safari>javascript and I find it is "on" again.

How can I run a script last?

Hiya,
I have a single backup job running a single dataset. That single dataset has an include statement to include a dataset directory, which holds individual datasets for the several hosts I want to back up, each with potentially different parameters. This works well, the hosts back up in some order (I don't care), everything's happy.
However, what I want to do is add a step on the end of this process to run a report on the admin server after all the backups are complete. That is, to run a script once, last.
If I add an "after backup" command in the dataset, it runs it (as stated in the manual) on the client servers, after every backup, which is no good to me. I've tried creating a separate job and scheduling it at a lower priority a few minutes later than the backup job, but that seems to just run when it feels like it, I presume because there aren't any conflicts so why shouldn't it?
Can anyone advise how I should be doing this?
Related question... I've tried putting an "after backup" step on the Catalog backup job, but that appears to get run twice (I presume because there are two "include" steps in the catalog dataset)! Is this expected? How can I get it to just run once, after the catalog backup is complete?
Thanks,
David.

Thanks Donna, but... no. It didn't work.
We've actually purchased a license for OSB, so I've fired this question at our official support channel now, and they came back with the same answer at the same time (are you the Oracle techie looking at my problem, by any chance?). For the record here's (with some tweaks for readability in this context) what I've sent back in response to that article.
From the article, I thought perhaps the following might do the trick:
include dataset /Hosts {
after backup optional "/usr/local/osb/pre-n-post after-fsd-hosts mail"
But, from the log:
2010/11/05.07:26:58 trouble parsing dataset in FSdaily line 1 - open brace appears where not allowed (OB dataset mgr)
"010/11/05.07:26:58 offending line is "include dataset /Hosts {
2010/11/05.07:26:58 trouble parsing dataset in FSdaily line 3 - bad nesting (OB dataset mgr)
"010/11/05.07:26:58 offending line is "}
So it appears I’m not actually allowed to do that. I don’t understand why that would be.
The only other idea I have is to include a dummy backup step, backing up something really small (because OSB won’t let you run a backup without backing anything up - sigh!), tack a script onto that, and hope like heck OSB decides that it should run that last. All the documentation I’ve read gives the impression that datasets are all about scope, not order, so I’m not altogether confident that this will work. In any case, it seems a pretty kludgy way of doing it! And, given the next paragraph below, I’m not all that sure it’ll work in any case.
My idea of scheduling a catalog backup for five minutes later than the client backups, with a lower priority, so that it runs when the client backups finish, also has a flaw - if I use two tape drives in parallel, it runs the catalog job in parallel with the last client job, which is completely useless. I want to put on the end of the tape a backup of the catalog as at just after the client backups, so that in the case of a disaster I can restore that and I’ll be good to restore everything else.
In addition to being completely useless for the purposes of putting an “after” catalog backup on the end of the tape, it’s also completely useless for the purposes of running a script last - I tried the following:
include catalog {
after backup optional "/usr/local/osb/pre-n-post after-catalog mail"
This ran the pre-n-post script twice, once for each component of the catalog, which is altogether not what I want it to do.
I can’t think of any way to achieve a catalog backup on the end of the script except for scheduling it for some time later and hoping the dataset backups always finish by then. Ugly.
The only way I can think to achieve the run-a-script-last is to munge all the datasets together into one humongous dataset file, and do stuff as in the article to try to bend OSB to my will (again, hoping that OSB obeys the order of statements in the dataset). Which, when I’m given the ability to use “include dataset /Hosts” to make it easy to maintain, seems a bit of a mean trick to pull on me. And, again, with two tape drives available I’m not at all sure it’ll work in any case.
I'll post further results as they come to light...
David.

How can I run a script from path?

Hi all
How can a illustrator script be run from a path by double clicking the script file not from illustrator menu->scripts.
thanks in advance
THAMIL

You can modify the script to use COM. For example, when the script is run in AI, there is an assumed application object - you can just use the members of the Application object without having an explicit Application variable. To do this in a standalone javascript, create a Illustrator.Application object:
var app = new ActiveXObject("Illustrator.Application");
var activeDoc = app.activeDocument;
You would do something similar for any object that would otherwise need to be created with new. You can get a list in the the registry - HKCR\Illustrator.*
Note that .length and collection[i] don't work when you do this. Use .count instead of .length. You need to use Enumerators:
var textEnum = new Enumerator(doc.textFrames);
for (; !textEnum.atEnd(); textEnum.moveNext()) {
var txt = textEnum.item();
txt.contents = "text";
You also have to use WScript.Echo() instead of alert().
Phil

How can I run a script when an application quit??

Greetings all,
I'm trying to write a script, which can be triggered automatically (to do some stuff) at the time when a given application quit. I was playing around with this test script, taking "TextEdit" as an example - it just prints a message when TextEdit exits.
==========================================
+*set targetapp to "TextEdit"*+
+*tell application "System Events" to set rr to name of the processes*+
+*--if targetapp is not in rr then*+
+*-- tell application targetapp to activate*+
+*-- tell application "System Events" to set rr to name of the processes*+
+*--end if*+
+*set rr1 to rr*+
+*repeat until rr1 ≠ rr and targetapp is not in rr1*+
+*tell application "System Events" to set rr1 to name of the processes*+
+*do shell script "sleep 1"*+
+*end repeat*+
beep
+*display dialog (targetapp & " is not active anymore !") as string buttons {"OK"} default button 1 with icon 0*+
============================================
Unfortunately, it seems to work if I launch TextEdit using the script itself; it doesn't work with first +*"if - end if"*+ block commented out. Does anyone know how can I achieve this? Any help or suggestion greatly appreciated. Cheers!!

Hi santanu,
I'm sure you can use a variation of this application of mine to do what you want. It monitors all running processes and then reports when one closes.
--initialize previous_processes
global previous_processes
tell application "Finder"
set previous_processes to get the name of every process --use "whose visible is true" to remove the background ones
end tell
--monitoring script
on idle
tell application "Finder"
set current_processes to get the name of every process
end tell
set numberofprocesses to count of items in previous_processes
set counter to 1
repeat while counter is less than (numberofprocesses + 1)
if current_processes does not contain item counter of previous_processes then
display alert item counter of previous_processes & " quit!"
end if
set counter to counter + 1
end repeat
set previous_processes to current_processes
return 1 --runs every second...can be changed
end idle

How Can I run a script to all servers in my servers list

Hi Guys
I have a Servers list:servers.txt , it's including all servers i need to run a powershell script,how can I use the powershell to run a script on those servers? thank you.I just start to learn about powershell.

You can pipe the results of Out-Command to Out-File (or Export-Csv, etc.) I'm not sure what kind of objects you're expecting from this script, so I'll err on the side of caution and use Format-List * in the example:
Invoke-Command -ComputerName $servers -FilePath c:\copy.ps1 |
Format-List -Property * |
Out-File -FilePath $home\Desktop\copy.log

How can i execute vb scripts in java program

hi
how can i execute any batch files or any other exe files (vb scripts) from java programs
thanks

Hi,
You use Runtime.exec to execute commands / exe-files. See the documentation (and remember that it will only work on windows):
http://java.sun.com/j2se/1.4.2/docs/api/java/lang/Runtime.html
/Kaj

How can I execute a script before connection?.

Hi ,
I want to execute a script before retrieving the data.How can I do this?.
Thanks...

When you say create a command line, what exactly are you referring to? I assume you have a logical schema mapped to the ebs instance you want to run the fnd_global function in (the same one you will have reverse engineered the models from etc), just set that as the schema on the step parameters and ODI will connect through for you as a SQL session.
Technology set to Oracle ?
What does the error actually say in the operator log?
ETA : might be worth checking a few of these links as the refer to EBS with ODI : Oracle EBS and ODI
Some of the pre-shipped KM's must do something similar to what you are trying to achieve for the apps security.

How can i execute codedui scripts by using dll

how Can I Execute Coded UI scripts by using the DLL from anywhere after creating the build

Hi yellesh,
If you mean that you want to run your test with bat file, as far as I know, we could call the MSTEST command line.
set mstestPath="C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE"
%mstestpath%\mstest /testcontainer:AutomatedUITest.dll /resultsfile:TestOutput.trx
Reference:
https://social.msdn.microsoft.com/Forums/en-US/29af65b3-598b-4205-80e6-35b942113f3b/how-to-run-coded-ui-scripts-trhu-bat-file?forum=vsautotest
https://social.msdn.microsoft.com/Forums/en-US/42a5d8f2-fe58-4133-b09d-28fa0553ab1a/run-coded-ui-test-in-certain-moment-in-future?forum=vsautotest
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I "unrevision" a script?

Similar Messages

Maybe you are looking for