How can I upgrade ver 10.5.8 so I can migrate with my new macpro
I am using Max OS X Ver 10.5.8. How can I upgrade my MacBook
I am using Max OS X Ver 10.5.8. How can I upgrade my notebookso I can migrate with my new MacPro?
Hello,
One way is to get & Install 10.6, then update it to 10.6.8.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
Similar Messages
-
How can I go from normally selected rings and fnotifications to 'vibrate only' for all calls and notifications?
Have you tried using the Ring/Silent switch on the upper left side? If it's set to 'orange', I think it only vibrates for almost everything, with a few exceptions.
-
I bought a Mountain Lion upgrade for $20 off the Apple site. I have four other Macs all under the same ID. How can I share the new OS with other computers. Or can I?
You can share it with other Macs under your control (not your neighbor's). You just need to be logged in under the buying AppleID for updates or to download again.
Use this thread to find a method of copying the ML download into a USB drive to make other installations easier: https://discussions.apple.com/message/16639520#16639520 -
I have a DVD Acrobat Pro 9. I upgraded laptops and trying to install but the DVD is not readable. How can I get a new DVD or Download Acrobat Pro 1. The product is registered and I have the serial number. PS: Contacting Adobe on this issue is impossible... direct support stinks.
Download AA 9 Pro from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. Make a new backup for your archive. You might also take the DVD to your library to see if it is a drive problem. You might also carefully clean the DVD with water and soap (do not use anything that would scratch the surface or you have destroyed it for sure) and see if that solves the problem. This is particularly an issue if you have finger prints or other crud on the DVD. However, it could also be a bad drive as I mentioned. Hopefully the download solves your problem in any case (I would backup the download to CD and/or backup HD).
-
How can I get a new password to do an upgrade to my Flash player?
How can I get a new password to do an upgrade to my Flash Player?
Why do you need a new password; just use the existing one: https://forums.adobe.com/thread/1619850
-
On Firefox 4, how can I put one "new tab" on the "tab bar" (The + sign) and one next to the "back/forward" buttons (as in FF 3.6)?
In my current Firefox, the "new tab" icon/item from the "customize" pop-up window menu of items is placed next to my home, back, forward buttons near the top-left of my header (Button 1 for "new tab"). Then, the tab bar automatically come with a small tab (with a + sign) to the right of your last tab opened (so you click on + and a new tab opens. Button 2 for "new tab"). I like to have this "new tab" button twice (as a + mini tab, and next to my "home icon".
When I upgraded to Firefox 4, I seemed to be only able to "customize" or use the "new tab" in one place. Either as an icon next to home button, or as a "+ minitab", but NOT both.
What can I do to put this button in Firefox 4 on BOTH places???
Your help is really appreciated. I want to upgrade, but I want my buttons on both places...
I upgraded to FF 4, but downgraded again just because this feature... that's just me of coarse :-)*New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/
-
how do I upgrade from Mac OS 10.5.8 to later versions so new software like turbo tax will work?
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
How can I use the new tablet experience in ICS?
I have a Galaxy Tab upgraded to Ice Cream Sandwich and installed Firefox, but it shows normal vertical-mode-oriented user interface.
How can I get the new tablet interface based on your promoted one?Hi Cyberkagami,
I noticed in your system details that you're testing out Firefox Nightly (currently version 14.0) and you're in-fact running the latest version. There is presently no tablet oriented interface available on the 'native' version of Firefox for Android as all the mobile developers have been directly focusing on making a great phone experience foremost for the new product. There are plans to create a tablet interface within the near future (there are mockups of the user-interfaces on Bugzilla bugs) time-frame; it is simply just not available yet. Stay tuned. -
How can i download the new Mac OS X version 10.6.8?
how can i download the new Mac OS X version 10.6.8 so i can install the latest iTunes on to my 2007/08 mac desktop?
You must purchase Snow Leopard:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Before upgrading be sure you do the following:
Repair the Hard Drive and Permissions
Boot from your Tiger Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Make a backup of your current system. -
HI,
I have recently installed Elements 13 having used Elements 11.0 successfully to build a database of 30,000 plus images indexed by place, people, and photo date. Elements 11 allowed me to add new places which are meaningful to me but which are a complete mystery to the mapping technology of Elements 13. For example some years ago I lived in London in a road called Argyle Road. In elements 11 I could enter the place tag as Argyle Road. In Elements 13 I am required to locate Argyle Road on the map, but the map presupposes that the Argyle Road I am referring to is in Ealing in West London. It is not!
I now live in a place called Broadsands but the Elements 13 Map places this 0.5 miles away from what I would describe as Broadsands.
So the question: how can I add a new place tag to my database without using the wretched and totally inadequate map technology that Elements 13 wants to impose.Thank you for your quick response, BalusC. I really appreciate your answer.
Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
Best Regards, Ailsa -
My serial number for Logic Studio doesn't work. I used one from a different box and it worked. How can I get a new number?
http://support.apple.com/kb/TS2005
http://support.apple.com/kb/HT1861
https://ssl.apple.com/support/proapps/serialnumbers/ -
i forgot the administrator password for my mac and cant set a new one without it how can i set a new one
Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/ -
How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
but not the usb iPhone i used to have.
And when i try to add a new one i dont get a USB option.
can some one help me please??
this is how it looks (after the bluetooth PAN i used to have USB iPhone option)The question would be more appropriate in the Mac forums as it is not really related to the iPhone.
-
How can i order a new printer head for my photoshop 7250e
How can i order a new printer head for my photoshop 7250e Is there a number i can ring to speak to someone or email address i can use or a web page where i can order one
or a list of agents i can use to get it from
Finding simple information seems impossible, no where does it mention spares or replacements
I have tried a lot of fault finding am convinced this is the problemHello NigelH1,
The Print Head for the Photosmart 7250 is not available outside HP.
Please call HP Tech Support for further assistance.
If you are in US , the toll free # is 1-800-474-6836 .
If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP. -
How can I create a new table in a MySQL database in MVC 5
I have an MVC 5 app, which uses MySQL hosted in Azure as a data source. The point is that inside the database, I want to create a new table called "request". I have already activated migrations for my database in code. I also have the following
code in my app.
Request.cs: (inside Models folder)
public class Request
public int RequestID { get; set; }
[Required]
[Display(Name = "Request type")]
public string RequestType { get; set; }
Test.cshtml:
@model Workfly.Models.Request
ViewBag.Title = "Test";
<h2>@ViewBag.Title.</h2>
<h3>@ViewBag.Message</h3>
@using (Html.BeginForm("SaveAndShare", "Home", FormMethod.Post, new { enctype = "multipart/form-data" }))
@Html.AntiForgeryToken()
<h4>Create a new request.</h4>
<hr />
@Html.ValidationSummary("", new { @class = "text-danger" })
<div class="form-group">
@Html.LabelFor(m => m.RequestType, new { @class = "col-md-2 control-label" })
<div class="col-md-10">
@Html.TextBoxFor(m => m.RequestType, new { @class = "form-control", @id = "keywords-manual" })
</div>
</div>
<div class="form-group">
<div class="col-md-offset-2 col-md-10">
<input type="submit" class="btn btn-default" value="Submit!" />
</div>
</div>
@section Scripts {
@Scripts.Render("~/bundles/jqueryval")
HomeController.cs:
[HttpPost]
public ActionResult SaveAndShare(Request request)
if (ModelState.IsValid)
var req = new Request { RequestType = request.RequestType };
return RedirectToAction("Share");
The point is that, I want the user to fill the form inside the Test view and click submit, and when the submit is clicked, I want a new entry in the new table to be created. But first of course I need to create the table. Should I create it using SQL query
through MySQL workbench? If yes, then how can I connect the new table with my code? I guess I need some DB context but don't know how to do it. If someone can post some code example, I would be glad.
UPDATE:
I created a new class inside the Models folder and named it RequestContext.cs, and its contents can be found below:
public class RequestContext : DbContext
public DbSet<Request> Requests { get; set; }
Then, I did "Add-Migration Request", and "Update-Database" commands, but still nothing. Please also note that I have a MySqlInitializer class, which looks something like this:
public class MySqlInitializer : IDatabaseInitializer<ApplicationDbContext>
public void InitializeDatabase(ApplicationDbContext context)
if (!context.Database.Exists())
// if database did not exist before - create it
context.Database.Create();
else
// query to check if MigrationHistory table is present in the database
var migrationHistoryTableExists = ((IObjectContextAdapter)context).ObjectContext.ExecuteStoreQuery<int>(
string.Format(
"SELECT COUNT(*) FROM information_schema.tables WHERE table_schema = '{0}' AND table_name = '__MigrationHistory'",
// if MigrationHistory table is not there (which is the case first time we run) - create it
if (migrationHistoryTableExists.FirstOrDefault() == 0)
context.Database.Delete();
context.Database.Create();Hello Toni,
Thanks for posting here.
Please refer the below mentioned links:
http://azure.microsoft.com/en-us/documentation/articles/web-sites-dotnet-deploy-aspnet-mvc-app-membership-oauth-sql-database/
http://social.msdn.microsoft.com/Forums/en-US/3a3584c4-f45f-4b00-b676-8d2e0f476026/tutorial-problem-deploy-a-secure-aspnet-mvc-5-app-with-membership-oauth-and-sql-database-to-a?forum=windowsazurewebsitespreview
I hope that helps.
Best Regards,
Sadiqh Ahmed
Maybe you are looking for
-
Action date field in follow up action
If you specify a follow-up action in a contract, you must enter a date or a date rule in the Action date field. question where is the Action date field i search for it in sales document contract and i don't found in contract data please help me
-
A charicteristic exists in a query,but i can't find it in the cube from
Hi: There is a charicteristic in a query, but i can't find it in the char list in the multiinfocube from which the query retrieve data. so why did the charicteristic exist in the char list of the query?
-
Hello, I tried the following example http://www.adobe.com/devnet/livecycle/articles/lc_designer_db_lookup_tip.pdf The dropdown list works fine but the button doesnt work. Everytime it gives me back a script-error without giving any details. error: "u
-
Need to download airport utility 5.6 on OS X 10.7.5 to work with older base station
need to download airport utility 5.6 on OS X 10.7.5 to work with older base station & airport extreme but install fails
-
Security questions through iPad expired time every 1 sec and i cant put them to use AppStore
I put a security questions already in my account , but when I try to use AppStore in my iPad It ask me to put moré security questions , the problem is when i try to do It every time It says the time has expired . That i should start again . I tryied