How can I use a setup.exe file on my mac

I am attempting to download a demo software on my mac. It uses a setup.exe and I am unable to make it execute. I do have microsoft office on my mac.

You need to be running Windows to use that software:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
6. Last is Q. Q is a freeware emulator that is compatible with Intel Macs. It is much slower than the virtualization software, Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Similar Messages

How can I script a Flash .exe file to always stay on top of all other windows?

Hi All,
I'm new to action script, and I just need this one script
> How can I script a Flash .exe file to always stay on top of
all other windows?
Basically what i want to do is have a flash-created
step-by-step instructional movie, but for the movie to remain on
top of all windows so the instructee is able to follow the
instructions on-screen...
It would be preferable to not have to buy another product
just to do this... as I said, this is the only scripting I need.
Thanks in advance
Cheers
Rick

if you create your exe with mProjector you can use one of its
new AS
commands to do this.
setZOrder
http://www.screentime.com/software/mprojector/docs/mWin_setZOrder.htm
all APIS
http://www.screentime.com/software/mprojector/docs/index.html
Demo
http://www.screentime.com/software/mprojector/demo.html
mProjector installs new classes and help into Flash, to
enable them you
must build your app with mProjector (its input is your swf)
John Pattenden
Screentime Media - Flash Tools since 1997
http://www.screentime.com

How can I use an old XMP file on a new set of images??

I have an older XMP file that contains settings used to retouch some previous images in a particular way. I'd like to apply those same settings to a new set of images. How can I use that older XMP file on a new set of images in Lightroom?
The contents of the XMP file are as follows:
<x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.2-c020 1.124078, Tue Sep 11 2007 23:21:40
">
<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
<rdf:Description rdf:about=""
xmlns:crs="http://ns.adobe.com/camera-raw-settings/1.0/">
   <crs:Version>6.0</crs:Version>
   <crs:ProcessVersion>5.7</crs:ProcessVersion>
   <crs:WhiteBalance>Custom</crs:WhiteBalance>
   <crs:Temperature>4700</crs:Temperature>
   <crs:Tint>+4</crs:Tint>
   <crs:Exposure>-0.35</crs:Exposure>
   <crs:Shadows>5</crs:Shadows>
   <crs:Brightness>+50</crs:Brightness>
   <crs:Contrast>+25</crs:Contrast>
   <crs:Saturation>-8</crs:Saturation>
   <crs:Sharpness>25</crs:Sharpness>
   <crs:LuminanceSmoothing>0</crs:LuminanceSmoothing>
   <crs:ColorNoiseReduction>25</crs:ColorNoiseReduction>
   <crs:ChromaticAberrationR>0</crs:ChromaticAberrationR>
   <crs:ChromaticAberrationB>0</crs:ChromaticAberrationB>
   <crs:VignetteAmount>0</crs:VignetteAmount>
   <crs:ShadowTint>-1</crs:ShadowTint>
   <crs:RedHue>0</crs:RedHue>
   <crs:RedSaturation>0</crs:RedSaturation>
   <crs:GreenHue>0</crs:GreenHue>
   <crs:GreenSaturation>0</crs:GreenSaturation>
   <crs:BlueHue>0</crs:BlueHue>
   <crs:BlueSaturation>0</crs:BlueSaturation>
   <crs:FillLight>0</crs:FillLight>
   <crs:Vibrance>+5</crs:Vibrance>
   <crs:HighlightRecovery>24</crs:HighlightRecovery>
   <crs:Clarity>+8</crs:Clarity>
   <crs:Defringe>0</crs:Defringe>
   <crs:HueAdjustmentRed>0</crs:HueAdjustmentRed>
   <crs:HueAdjustmentOrange>0</crs:HueAdjustmentOrange>
   <crs:HueAdjustmentYellow>0</crs:HueAdjustmentYellow>
   <crs:HueAdjustmentGreen>0</crs:HueAdjustmentGreen>
   <crs:HueAdjustmentAqua>0</crs:HueAdjustmentAqua>
   <crs:HueAdjustmentBlue>0</crs:HueAdjustmentBlue>
   <crs:HueAdjustmentPurple>0</crs:HueAdjustmentPurple>
   <crs:HueAdjustmentMagenta>0</crs:HueAdjustmentMagenta>
   <crs:SaturationAdjustmentRed>0</crs:SaturationAdjustmentRed>
   <crs:SaturationAdjustmentOrange>0</crs:SaturationAdjustmentOrange>
   <crs:SaturationAdjustmentYellow>0</crs:SaturationAdjustmentYellow>
   <crs:SaturationAdjustmentGreen>0</crs:SaturationAdjustmentGreen>
   <crs:SaturationAdjustmentAqua>0</crs:SaturationAdjustmentAqua>
   <crs:SaturationAdjustmentBlue>0</crs:SaturationAdjustmentBlue>
   <crs:SaturationAdjustmentPurple>0</crs:SaturationAdjustmentPurple>
   <crs:SaturationAdjustmentMagenta>0</crs:SaturationAdjustmentMagenta>
   <crs:LuminanceAdjustmentRed>0</crs:LuminanceAdjustmentRed>
   <crs:LuminanceAdjustmentOrange>0</crs:LuminanceAdjustmentOrange>
   <crs:LuminanceAdjustmentYellow>0</crs:LuminanceAdjustmentYellow>
   <crs:LuminanceAdjustmentGreen>0</crs:LuminanceAdjustmentGreen>
   <crs:LuminanceAdjustmentAqua>0</crs:LuminanceAdjustmentAqua>
   <crs:LuminanceAdjustmentBlue>0</crs:LuminanceAdjustmentBlue>
   <crs:LuminanceAdjustmentPurple>0</crs:LuminanceAdjustmentPurple>
   <crs:LuminanceAdjustmentMagenta>0</crs:LuminanceAdjustmentMagenta>
   <crs:SplitToningShadowHue>138</crs:SplitToningShadowHue>
   <crs:SplitToningShadowSaturation>13</crs:SplitToningShadowSaturation>
   <crs:SplitToningHighlightHue>0</crs:SplitToningHighlightHue>
   <crs:SplitToningHighlightSaturation>0</crs:SplitToningHighlightSaturation>
   <crs:SplitToningBalance>0</crs:SplitToningBalance>
   <crs:ParametricShadows>0</crs:ParametricShadows>
   <crs:ParametricDarks>0</crs:ParametricDarks>
   <crs:ParametricLights>0</crs:ParametricLights>
   <crs:ParametricHighlights>0</crs:ParametricHighlights>
   <crs:ParametricShadowSplit>25</crs:ParametricShadowSplit>
   <crs:ParametricMidtoneSplit>50</crs:ParametricMidtoneSplit>
   <crs:ParametricHighlightSplit>75</crs:ParametricHighlightSplit>
   <crs:SharpenRadius>+1.0</crs:SharpenRadius>
   <crs:SharpenDetail>25</crs:SharpenDetail>
   <crs:SharpenEdgeMasking>0</crs:SharpenEdgeMasking>
   <crs:PostCropVignetteAmount>0</crs:PostCropVignetteAmount>
   <crs:GrainAmount>0</crs:GrainAmount>
   <crs:ColorNoiseReductionDetail>50</crs:ColorNoiseReductionDetail>
   <crs:ConvertToGrayscale>False</crs:ConvertToGrayscale>
   <crs:ToneCurveName>Medium Contrast</crs:ToneCurveName>
   <crs:ToneCurve>
<rdf:Seq>
<rdf:li>0, 0</rdf:li>
<rdf:li>32, 22</rdf:li>
<rdf:li>64, 56</rdf:li>
<rdf:li>128, 128</rdf:li>
<rdf:li>192, 196</rdf:li>
<rdf:li>255, 255</rdf:li>
</rdf:Seq>
   </crs:ToneCurve>
   <crs:CameraProfile>Adobe Standard</crs:CameraProfile>
   <crs:CameraProfileDigest>3DA8CE4A626CE36A1D0C55BF157793C9</crs:CameraProfileDigest>
   <crs:HasSettings>True</crs:HasSettings>
</rdf:Description>
</rdf:RDF>
</x:xmpmeta>

I’m pretty sure Adobe NEVER intended for someone to copy an XMP file from one photo to another outside of LR as a way to replicate settings.   You can make a preset from a photo, as discussed, or if you don’t want to do that, copy-paste the settings from a representative photo that you initially select to one or more new photos. You could have a special LR folder that holds standard photos to copy/paste from. Of course creating a Develop preset from the representative photo is the “normal” way to handle such situations, but maybe you have hundreds of different situations to copy settings from and don’t want to create presets for each one, but I’d argue that you could create a complex folder hierarchy for your presets and still have them findable without that much problem.
As far as the mystery about why some photos show Reset and some show From Metadata, is the Process Version (down in Camera Calibration) of the photo before reading the settings the same between the two situations? And in general, are these virgin photos newly imported into LR or have some been modified in LR, already? Does an XMP file already exist for any of these, where that XMP is being overwritten by your external-to-LR copying? Or do you have auto-write-XMP enabled and your hand-copied XMP is getting overwritten by LR, automatically, before you have a chance to read in anything?

To test how can we use the opt 'logical file name' to name the file based

Hi Sir/Madam,
to test how can we use the opt 'logical file name' to name the file based on the selection made in the dtp run for extracting data as flat file.

Hi Vishali,
In the DTP select the file location as application server and give the logical file path. The actual file and logical path can be created using transaction "FILE" and "AL11".
Rest of the process is same as that of extraction from local file.
Regards,
Durgesh.

How can I use a progress bar in objective c mac

How can I use a progress bar in objective c mac? I have a code that downloads a file and I want to be able to let the progress bar increase by 1. A bit further on the code (to download the file) it needs to increase again. And so on...
My code
-(IBAction) downloadButtonPressed:(id)sender;{
    //get the path to the image that we're going to download
    NSURL *url = [NSURL URLWithString:@"https://www.dropbox.com/s/l6o07m48npxknt4/Cluedo.zip?dl=1"];
    //get the path to documents folder where we're going to save our image
    NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
    NSString *DocumentsDirectory = [paths objectAtIndex:0];
    NSString *filePath = [DocumentsDirectory stringByAppendingPathComponent:@"Cluedo.zip"];
    //Download the file to memory
    NSData *data = [NSData dataWithContentsOfURL:url];
    NSError *error = nil;
    //Save it on the Documents directory
    [data writeToFile:filePath options:NSDataWritingAtomic error:&error];
    NSFileManager* fm = [NSFileManager defaultManager];
    NSString* zipPath = filePath;
    NSString* targetFolder = @"/Applications"; //this it the parent folder
    //where your zip's content
    //goes to (must exist)
    //create a new empty folder (unzipping will fail if any
    //of the payload files already exist at the target location)
    [fm createDirectoryAtPath:targetFolder withIntermediateDirectories:NO
                   attributes:nil error:NULL];
    //now create a unzip-task
    NSArray *arguments = [NSArray arrayWithObject:zipPath];
    NSTask *unzipTask = [[NSTask alloc] init];
    [unzipTask setLaunchPath:@"/usr/bin/unzip"];
    [unzipTask setCurrentDirectoryPath:targetFolder];
    [unzipTask setArguments:arguments];
    [unzipTask launch];
    //[unzipTask waitUntilExit]; //remove this to start the task concurrently

Your code really isn't suitable for a progress bar, not a real one anyway. Your code will spend about 99.9% of its time in the method "dataWithContentsOfURL:url". That is not a method you want to use in the real world. It is only for demos or proof of concept exercises. All network operations should be asynchronous. That gives you the ability to gracefully recover when there is a failure and also to do fancy things like display a progress bar and tell the user when the download is complete.
Once you get the asynchronous download logic working, then you can worry about the progress bar. The first thing you will need is the size of the file. Without that, all you can ever do is an indeterminate progress bar or spinner. If you have the size of the file, then you can keep track of how much of the file you have downloaded and update your progress bar with the percentage complete. Make sure to throttle it to no more than incrementing by 1% at a time. Otherwise, a large file or a file transferred in many small chunks, would waste too much time updating the progress bar for no change.

I want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone

i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!

Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com

HT4614 How can i use the Thunderbolt cable to link my Mac computers

How can i use the Thunderbolt cable to link my Mac computers

Connect them with it and start up one computer with the T key held down.
(76624)

HT204382 what can I use to view flv files on my Mac with Lion?

What can I use to view flv files on my mac running lion? I have tried several free ones like VLC & they play 4-5 seconds & quit?

http://perian.org allows playback of Flash formats via QuickTime Player.

How can I get rid of other files on my mac ?

how can I get rid of other files on my mac ?

Hope this helps.
1. Empty Trash.
    http://support.apple.com/kb/PH10677
2. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
3. Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
4. For more on this and very helpful tips:
    http://pondini.org/OSX/DiskSpace.html
    http://pondini.org/OSX/LionStorage.html
5. Disk space / Time Machine ?/ Local Snapshots
   http://support.apple.com/kb/ht4878
6 Re-index Macintosh HD
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409

How can I use the setup utility with my gaming adapter?

How can I use this program (the cd that came with my netgear wireless game adapter) to setup my gaming adapter? I want to configure my gaming adapter but it seems like i cannot do so? How can I achieve this?

Hi again,
thought a bit about this...
This thing looks to me like a special sort of wireless router with one ethernet port, which also is a bit old I guess.
With nowadays wireless router, the configuration usually is made using a Web-Browser like Safari or Firefox and accessing the router through a built-in webpage.
The IP adress of the router is also usually 192.168.0.1.
Have a look inside the Netgear-Documentation, to see if this also possible here.
Stefan

I have a passport external hard. previously, I used it on windows, then I changed my laptop to mac. Now, It's only read. How can I use it for copying files on it on mac? I don wanna use it on windows again.

I have a passport external hard. previously, I used it on windows, then I changed my laptop to mac. Now, It's only read. How can I use it on my mac for copying files on my passport? I don wanna use it on windows again.

If you're not going to use the drive on a Windows machine, you should use Disk Utility (Applications>Utilities folder) to erase the drive and format it as "Mac OS Extended (Journaled)" with a single GUID partition (default):
Good luck,
Clinton

How can I use/edit a xlxs file?

I was sent a xcel spreadsheet as xlxs. How can I use it?

Microsoft Excel (part of Microsoft Office)
Numbers (Apple)
Open Office
Libre Office
Any of these will open the file, the last 2 are free.

HT204382 how can i play an AVI movie file on my mac????????

how can i play an AVI movie file on my macbook??????

Or download and install the free MPlayerX from the App Store.

How can I use my iphone as modem for my mac?

How Can I use my iphone 4 as modem for my mac-pro in areas where there is not Wi-Fi

If your cell phone carrier supports tethering with the iPhone, you need to sign up for a tethering plan with your carrier first.
http://support.apple.com/kb/HT3574

HT201258 How do install windows 8 with a windows setup.exe file on my mac? I have a legal download purchase from windows but it is in exe file not ISO.

I have the setup.exe for windows 8 .. Not the ISO file .. How can I install w

You need to run the .exe on a Windows machine, which is a Download Manager for the ISO. It will let you create a DVD, ISO or a USB media.

How can I use a setup.exe file on my mac

Similar Messages

Maybe you are looking for