I have a passport external hard. previously, I used it on windows, then I changed my laptop to mac. Now, It's only read. How can I use it for copying files on it on mac? I don wanna use it on windows again.

I have a passport external hard. previously, I used it on windows, then I changed my laptop to mac. Now, It's only read. How can I use it on my mac for copying files on my passport? I don wanna use it on windows again.

If you're not going to use the drive on a Windows machine, you should use Disk Utility (Applications>Utilities folder) to erase the drive and format it as "Mac OS Extended (Journaled)" with a single GUID partition (default):
Good luck,
Clinton

Similar Messages

How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?

How can i format my external hard drive to write files from Mac without loosing the files that i alredy have on my external hard when i used it with windows?
I have been using Windows to write files to my 1TB WD external hard drive and I do not want to format to loose the files capacity of around 500GB
Someone, Please help

Hi Allen,
Is there any way to store the back up to Mac and restore after formating?

Hello once again.. i have formatted my external Hard drive it using exFAT, now my windows cant detect my device, can u plzz help me the whole purpose is getting ruined, i use Windows 7 ultimate 64 bit

hello once again.. i have formatted my external Hard drive it using exFAT, now my windows cant detect my device, can u plzz help me the whole purpose is getting ruined, i use Windows 7 ultimate 64 bit

This is a problem with the Mac OS X implementation of exFAT. I've had the same problem.
Best is to use a Windows box to format the drive exFAT. Then it can be read by both Windows and Mac OS.
But aren't Macs supposed to "Just Work"? Not in this case.

I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Mac

I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Machine, there are only about 5 backups recorded on the ext. hard drive. There were many more before. Any idea what happened and if I have to buy a new back up hard drive?

Hallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan

I have an Acer external hard drive 500GB. Is it compatible with Apple MacBook Pro laptop?

I have an Acer external hard drive 500GB. Is it compatible with Apple MacBook Pro laptop?

There are only a handful or Hard Drive mechanism manufacturers left. Acer is not one of them, although they may make the enclosure (but probably not that either). So in essence you have a Brand-X enclosure with some sort of Hard Drive inside.
Most of those work fine once they are re-Initialized for use on the Mac. For me, I prefer to use the Re-purposing of a drive as an opportunity to re-write every block with Zeroes (which can take several hours but can be done in the background), assuring that every block is good.

I updated my software in my iPad, can't connect to App Store or iTunes, It says that I have to change to US account, right now I'm in Mexico, how can I change it to mu US account.

I updated my software in my iPad, can't connect to App Store or iTunes, It says that I have to change to US account, right now I'm in Mexico, how can I change it to my US account

Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
          8.8.8.8
          8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

HT203167 i have a purchased hardcopy of dvd movie which included digital copy. i redeemed it last week and loaded it to my ipad3, this week it is gone from my ipad and is nowhere in itunes. how can get my paid-for copy now?

i redeemed a copy of a DVD / Digital movie last week in itunes tohen synced it to my ipad(3) now it is gone and itunes
won't let me redo. How can i get my digital copy again?

Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here.

I have upgraded to 10.6.8 on my macbook pro and find I don't have pages. Pages in app store is for 10.10 only. How can I access all my pages files in Snow Leopard?

I have upgraded to 10.6.8 Snow Leopard from Leopard on my macbook pro and now cannot read and write pages. Pages in app store is for 10.10 and above. I don't have a pages application. Where can I get pages for snow leopard?

It's been so long since I bought my macbook pro in August of 2010, but I do remember the iwork disk that had pages, numbers, and keynote on it, but I can't find the disk in my closet. I did not realize that when I took my computer in to the genius bar to upgrade to Snow Leopard, and then to download Yosemite, that I would lose these applications. I had no reason to open pages when I emptied my hard drive to upgrade to Snow Leopard, so I don't know if I kept iwork when I upgraded to Snow Leopard at the Genius Bar. I had file vault on with my external drive on, and since removed it before the upgrade, but now all my documents are unable to open on my external drive. ****. So now the new problem is how do I undo file vault in a new OS 10.10 when encoded in 6.8? Can I take my external drive in to Genius Bar?
I bought my macbook pro at Best Buy, but can't remember if iwork came with this computer, or with an older mac I bought. Can anyone check to see if I have a valid key code, and will insertion of an iwork disc allow me to use pages with Yosmite?

HT1937 i have iphone 4, and now i am in uae. how can i unlock phone for uae

I have iphone 4 and now i am in uae. how i can unlock iphone for uae

Only the carrier to which the phone is locked can authorise the unlocking. You will have to talk to them.

I have a LaCie external hard drive. I cannot locate all of my pictures once I download them from my Macbook Pro. How do I find them on the LaCie ar25u3?

I have over 5,000 pictures that I put on my LaCie external HD. When I open the LaCie I can only find some of my images. Where exactly would I find them on my hard drive?

That's a very open-ended question. You say that you put them on the LaCie. What do you mean by that? Did you drag-and drop them onto the LaCie icon or use some other method? If you put them on the LaCie then they will be right where you left them unless the drive is failing. Have you seen all the pictures there in the past and they are gone now?
To correct any problems the drive is having:
1) Click "Applications" > "Utilities" > "Disk Utility"
2) Select your LacCe's name on the left sidebar
3) Click "Repair Disk" button (lower right).
If there are minor problems then Disk Utility will repair them. If it lists major problems with the disk then you may need a more advanced repair utility like DiskWarrior.
Let us know some details and someone will try to help you.

I have a Toshiba external hard drive that i used to back up my Windows 7 HP -- I want to transfer files to my new Mac and it won't accept. Help?

I have a Toshiba external hard drive that I used to back up my Windows 7 HP -- I am not able to get the files off of it (pictures) onto the Mac. I am NOT a very technical person. IS there a simple easy way to explain and do this -- OR a simple way to just say it is not possible?

If you connect the external hard drive to your Mac does it show up in the Finder? If so, do the files you are trying to transfer show up? What happens when you try to move them over?
What kind of Mac are you using and what operating system does it have running on it?
Let us know, we'll keep helping you.
Best of luck.

I currently have a MAC Mini, which has 1 Firewire 800 port. I have a 1TB external hard disk that runs at Firewire 400. Can I insert another external hard drive that runs at Firewire 800?

Here's the deal. Currently running SL 10.6.8 on a MAC Mini. Planning for eventual upgrade to ML. Have a 1TB external hard drive partitioned into two volumes, one volume for Time Machine and one volume for SL which I periodically update using Superduper. Thus I always have a point-in-time bootable backup on the external hard drive.
The MAC Mini supports Firewire 800. However, booting from my current external hard disk is pretty slow, since it only supports Firewire 400. I am considering buying an Iomega MiniMax which supports Firewire 800. Then, I would use the MiniMax as my bootable backup volume, and relegate the older hard drive to Time Machine.
So, question #1 is, can I daisychain the new MiniMax between the MAC Mini and my existing external hard drive? My expectation is that the new Mini Max would run using Firewire 800 and that the existing hard drive would run at Firewire 400 speed as it does today. If it doesn't (e.g., daisychaining in the Firewire 400 external disk with the MiniMax Firewire 800 external disk ends up running the whole leg at 400), my resolution will be to run the existing hard disk off an available USB port and have just the MiniMax running at Firewire 800.
Why am I going to all this trouble? That's question #2. I don't trust upgrades; they always break something. When I upgraded from 10.5.x to 10.6.x, the web directories got renamed, and all of my web apps 403'd until I figured out what happened. Plus, I have accounts for other family members, and in order to ensure their ability to use the computer during my upgrade process, I need to have the ability to fall-back quickly to a known-stable version of OSX. So what I'm trying to do is insulate myself from problems by partitioning the MiniMax into two volumes, taking a Superduper image of my current installation on the Mac Mini to MiniMax external drive volume 1, then upgrading to ML on the MAC Mini, and take a SuperDuper image of that to MiniMax external drive volume 2. Then, if the upgrade results in problems I can't resolve immediately, I can simply reimage the MAC Mini from MiniMax volume 1. BUT ...
... I've read that the ML installation creates a "service and support" partition that is different than the startup disk. I'm concerned that I won't be able to reimage the hard disk in the MAC Mini once I upgrade it to ML because of the partitioning changes it introduces on the startup disk. Theoretically, I +should+ be able to use the disk utility on my SL system to repartition the disk in the MAC Mini prior to reimaging it from my backup, but I'm considering the possibility that the new partition may be of a type that the SL disk utility cannot identify, and might therefore be unable to delete or even detect. So I'm hoping someone else has been down this road and can advise me. Even at Firewire 800 speeds, booting from an external disk is still going to be slow, so I want to be able to restore my SL image to the MAC Mini hard disk.
A little background on me. I work for a major disaster recovery provider. I used to have a Mac PRO G5, which I got used, and the first thing I did with it was install a second hard disk, SuperDupe an image from the first disk to the second, and made sure I could boot from the second. THEN I started using and customizing the MAC. I really feel vulnerable with the MAC Mini, since it only has the single internal hard drive - sort of like going out in public dressed only in a long T-shirt. So my whole thing is, I ABSOLUTELY MUST BE ABLE TO PUT THINGS BACK THE WAY THEY WERE before I do the migration to ML.
Obsessive-cumpulsive? Yep. Anal? You got it. That's why I'm in the DR business.

You may have overloaded the port, following the instructions below it should reset:
+1. Shut down the computer.+
+2. Disconnect all devices and all other cables, except the keyboard and mouse cable(s).+
+3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.+
+4. Plug the computer back in and turn it on.+
+5. Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.+
http://support.apple.com/kb/HT1317?viewlocale=en_US

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect to my MacBook it erases everything on had on there. Can someone please help with this problem?

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.

dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed REMOVE IT !!
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/

My Mac is telling me that my disk is full. I have bought an external hard drive and have just listened to a youtube tutorial on how to move iTunes library to the external hard drive. If I do this can I still load new media on my Mac without the external?

my Mac is telling me that my disk is full. I have bought an external hard drive and watched a youtube tutorial on moving iTunes library to external hard drive. Will I still be able to use iTunes on my Mac for new media or will this now only work through my external hard drive?

To do this you need to learn the details of how iTunes works. For example, you just said, "leave my iTunes on my computer". iTunes is the application itself so of course it has to be on your computer. That said, I therefore don't know what you mean when you say leave iTunes on your computer. The phrasing of your question suggests to me, if I may be frank, you don't understand how iTunes works fully and we can't just give you a "do this" answer and have it work out. It would be too easy to make a mess of things.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
Yes, you can download media and delete it again (but if it is from the iTunes Store there is the possibility you can't always download it again). Of course if you want to keep a copy you can archive it. I have done that with some files for which I have no room on my computer. I transfer them to an external hard drive and delete the reference to the file (but not the file itself) from my library. If I want a quick listen I go to the file on the drive and use Quicktime player or something else non-iTunes so I don't have to have it added to iTunes and delete again. I don't know if that is the solution you are looking for. I could leave the reference in iTunes but if the file can't be located by iTunes it will tell me there is a broken link = ! I guess I could live with that except I periodically scan my library for broken links and don't want it getting confused with ones I have done deliberately and ones suggesting I am really missing a file somewhere.
Another possibility is to make a second iTunes library for material you are archiving and only use that library when the computer is using the external drive. There are tricky aspects to dong that but it is a possibility too.
The simple solution for most people with computers with tiny drives (as most seem to be these days) is to put their whole iTunes library on an external drive and use it from there.

I have a passport external hard. previously, I used it on windows, then I changed my laptop to mac. Now, It's only read. How can I use it for copying files on it on mac? I don wanna use it on windows again.

Similar Messages

Maybe you are looking for