How can i use BAPI_SRM_DOC_GETLIST to get shopping card items/worklists

Hello,
I'll like to use BAPI_SRM_DOC_GETLIST to read shopping cart items for approver or/and requestor. I fail to use the correct RMS_ID, SPS_ID and the most important is which property_selections should be entered?
Is there an alternative BAPI for that? As requirements only BAPIs have to be used. I know the FM SWN_UWL_GET_WORKLIST returns exactly the results i need but it is unfortunately not a BAPI.
Regards,

Hi,
check for all this parameter.
Short Description: Reads all saved monitor sets
BAPI Object :SystemMonitorSet
BAPI Method :GetList
Function
You can determine the names of all existing monitor sets using this method. Using these names, you can then determine the names of the monitors that exist in each of the sets.
Parameters (Import)
EXTERNAL_USER_NAME
Name of the user in the external system that initiated the method call
Parameters (Export)
MONITOR_SETS
Table with the names of the existing monitor sets (Structure BAPIMSNAME, that consists of only the component NAME)
RETURN
Structure BAPIRET2 with the return values from the method call
Exceptions
MSG_EXT_USER_MISSING MSG_CANT_LOG MSG_NOT_LOGGED_ON MSG_NO_MONITOR_SETS_FOUND MSG_UNKNOWN_PROBLEM
RFC Interface
function BAPI_SYSTEM_MS_GETLIST
importing
EXTERNAL_USER_NAMElikeBAPIXMLOGR-EXTUSERtypeRFC_CHARlength16
exporting
RETURNstructureBAPIRET2length552numberoffields14
tables
MONITOR_SETSstructureBAPIMSNAMElength60numberoffields1
exceptions
Check your monitor sets.

Similar Messages

How can I use applet to get the desktop image of client

hi,I have a question to ask u.
How can I use applet to get the desktop image of client? Now I develop a web application and want user in the client to get his current image of the screen.And then save as a picture of jpeg format ,then upload it to the server?
I have done an application to get the screen image and do upload file to server in a servlet with the http protocal.

Since the desktop image is on the client's local hard drive, you'll need to look at trusted applets first.

How can we use "tooltip " option in heirarchical tree item in oracle 11g?

how can we use "tooltip " option in heirarchical tree item properties in oracle 11g forms?

hi user11973188
how can we use "tooltip " option in heirarchical tree item properties in oracle 11g forms?isn't it exist in the tree item's property itself... ?!
Regards,
Abdetu...

TS1292 how can i use my i tunes gift card if i bought it here in saudi arabia? thanks

how can i use my i tunes gift card if i bought it here in saudi arabia? thanks

Try Here > http://support.apple.com/kb/TS1292
If no joy...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How can I use Vibo 3G(Taiwan) SIM card to enable new Ipad internet tethering?

How can I use Vibo 3G(Taiwan) SIM card to enable new Ipad internet tethering?

Eric Martens1 wrote:
What is the reason for Apple to skip this function? In fact, I feel pretty uncomfortable with this decision, it hinders me from using the iPad in a useful way. What is the reason to allow tethering on an iPhone and not on an iPad?
We are all just your fellow users. No one here is going to be able to answer those questions for you. Bottom line is, for whatever reaons, you cannot use your iPad as a mobile hotspot. If that's the reason why you bought it, you need to either return it or sell it.
Submit your feedback to Apple here:
http://www.apple.com/feedback
Many people find that it's still a useful device even without that feature.

HT5622 Why can't I use my Apple ID to iTunes? How can I use it with out credit card?

How can I use my Apple ID in iTunes with out credit card?

For me it's the same, I've just bought an iPad mini two weeks ago but I cannot log in with any Apple account in FaceTime.
I enter my apple account in faceTime, then I press next the second screen and it shows "validating..." but it never gets validated.
What's happening? This is really annoying

No ISA slot available in PC. How can I use PCI-85 Modbus Plus card with Lookout?

My application is to communicate with two Modicon PLCs using Modicon's ModBus Plus (PCI based PCI-85) network card inside my PC, and using Lookout as an SCADA software. Since there is no ISA slot available in new PCs, I can not use Modicon's ISA-85 Modbus Plus networc card. But Lookout does not support PCI based PCI-85 card, how can I use PCI-85 card then, with Lookout? Why doesn't Lookout support it? I asked the following question from from the Modicon's representative about it:
If I purchase Modbus Plus Driver Suite CD (SWMXDS001, 05, or 10 etc),will I be able to use Lookout SCADA software (by the way, it supports standard MB+ prtocol) for my application? If yes, can I use any version of an
y of the ISA, PCI, or PCMCIA based MB+ card?
His answer was:
The Modbus Plus Driver Suite will talk to any version of card, PCMCIA, ISA, and PCI. The question now is will the SCADA package you are
planning on using be able to talk to the Modbus Plus Driver Suite? You must contact National Instruments and ask them if they support Modbus Plus, and if
they used the MB+ system developement kit to develop their product. Or if they wrote their own MB+ drivers, do they work with Modicon hardware?

Hi,
currently Lookout does not support the PCI-85 card. The only card supported for Modbus Plus is SA-85. Please see for further information:
Where can I Find Drivers for Communicating to PLCs, RTUs, and Other Industrial Hardware?
How to configure the SA-85 card for Modbus Plus
Hope this helps
Roland

How can i use the subitem in SAP PR Item ( like 1,1.1,1.2,1.3,2,2.1,2.2,2.3

Dear Experts,
how can I use the subitem in SAP purchase requisition Item ( like 1,1.1,1.2,1.3,2,2.1,2.2,2.3,3,3.1,3.2,3.3,4,4.1,4.2,4.3,5,5.1...)?
Could you please tell me how can i configure Item Number Interval in SAP purchase requisition ?
Best Regards,
Merry

The purchase requisition item number is a numeric, it can not contain anything except digits.

HT201407 i have a vodafone iphone5 - how can i use it with an O2 card? can I unlock?

I have an iphone5 on a vodafone contract. How can i use it with an o2 sim and how can i unlock?

Only the carrier to which the phone is locked to can unlock your phone, call your carrier and ask them if they will.

How can I use a PCMCIA RS-485 card from a LabView .exe?

Hi all,
We are going to be taking a LabView application and compiling it into an executable (.exe) for use by someone who does not have LabView. This program requires use of either a National Instruments PCMCIA RS-485 card or possibly a USB RS-485 card. The question is this - how do I use the card since we will not be able to run the MAXX software ahead of time to "install" the card?
Thanks,
Jason

Hi Jason,
On this deployment machine, you will need to have NI-Serial, NI-VISA, and the LabVIEW Run-time Engine. The version of the LabVIEW run-time engine will need to be the same version as the application was developed on. This can be downloaded from the Drivers and Update page or an installer can be created to install your application as well as the necessary run-time engine.
If your application has RS-485 communication, you will need to install both NI-Serial and NI-VISA on this deployment machine. NI-Serial is the driver for the NI PCMCIA-485 or NI USB-485. The NI-Serial driver allows the devices to be properly configured and recognized in Windows. NI-VISA gives you the programming capability in LabVIEW. You can add both the VISA run-time engine and NI-Serial to your installer. You will need both of these drivers with the NI Serial hardware.
You will have to run through the "Found New Hardware" Wizard when you install the hardware initially on this deployment computer, but setting up the baud rates and communication configuration should be done in your application as normal.
I hope this helps!
Regards,
Missy S.
Calibration Engineer
National Instruments

How can I use app store without credit card.... Because I don't ve it....

Plx help me... I can't download any app from the app store.... Plx tell me how cn I make an account without credit card....

If you already created an Apple ID and you are trying to finish it without using a credit card - you may have problems with that. The key to creating the ID without a credit card is to download a free app first - before you create the ID. You will be prompted to create the ID once you try to download a free app.

HT2534 How Can I Use Itunes Without A Credit Card?

This problem is really starting to annoy me.
At first, I tried to make my Apple ID in Itunes, I wasn't able to make it though because I did not have a credit card. I had a look at the support and found out that there should be a 'None' option next to Visa, Mastercard, Paypal etc. I go through the process again in Itunes, expecting to find this 'None' button, but it does not exist. All there is is Visa and Mastercard. And option for Paypal isn't even there, even though the article I checked showed an image with it being there (Article: http://support.apple.com/kb/HT2534).
So, I try to make my account via the apple.com website. I complete this with no question of billing, and I think the problem is solved. However, when I try to log in on Itunes, it is, once again, requesting my billing information which I cannot provide because I do not have a credit card.
Maybe Apple needs to make it possible for people who do not have credit cards to use this service that I have 'been told' is very good. Or maybe they should stop providing us with article with obviously outdated images.
If anyone has a solution to this problem, please let me know.

You can create a new account without credit card but you cannot change your exisiting account into NONE payment account.
Follow the instruction and create an account without credit card in iTunes on your computer.
Or on your iPod Touch, Purchase a free App then create a new appleID.

How can I use evaluate to get the instance variable in customized tag

1.
At first , I create a class called bean,and declared several params in it and do not define any getter function for the param.
class bean{
String param = "test";
SomeClass scObj = new SomeClass();
2.
The second ,I use
request.setAttribute("beanObj",new bean());
3.
And then I wanna use the customized tag to show a text box , then initialize it's value.
<salt:text name="param" value="beanObj.param">
<salt:text name="obj" value="beanObj.scObj.func()">
4.
I tried the evaluator provided by JexlContext ,Struts, JSTL and it seems that if I do not define the getter for the variable ,I can not get the bean's instance variable's value.
Expression e = ExpressionFactory.createExpression( value );
JexlContext jc = JexlHelper.createContext();
jc.getVars().put(strInitBeanName, request.getAttribute("beanObj"));
Object obj = e.evaluate(jc);
the result of the obj is null....
Can anybody recommand some other evaluator can get the value of a instance variable from an object?

do you have any other suggestion ? Nops, somebody else may have though. AFAIK, all lookups of the type
beanName.propertyNameuse reflection on the getXXX() methods to access the property.
Having said that, I guess you could write one though in a custom tag, using the same - reflection (you will ahve to rely on the java.lang.reflect.Field class quite heavily) - but that would be reinventing the wheel for most other functionality that you would have to include (like looking up the bean in scope etc)
cheers,
ram.

How can I use JDBC to get the db name in a db url ?

Hi,
My program needs to read a database url from a txt file and connect to the specify database. And my program also needs to know what's the database name. So DatabaseMetaData or Driver can retrieve the database name from the url ?
Please brief me about that.
thank a lot.

You need to write a java program to read the text file with buffered streams. Then you need to use this file as a bean.
In the same file you can have connection to your database.
get theconnection and related things in your web application.
Thanx,

How can I use a Counter in a Card 6601 for several times in the same VI

When I try to use a Counter two times for read and for write, I get always a error (no. 50103). What should that mean.

From the menu Help-->Explain Error...
"The specified resource is reserved. The operation was completed by ignoring or overriding the specified resource."
If you are using one particular counter for both read and write operations, you'll need to clear the read task before configuring the write task and vice versa. To clear the task in traditional NI-DAQ, pass in the task id to "Counter Control.vi" with a control code of 'reset'. When using DAQmx wire the task into "DAQmx Clear Task.vi".
Do you really need to use the same counter in both a read and write mode at various times? Are the other three all tied up? Maybe I or someone else can help more if you describe the app and/or post some example code.
-Kevin P.

How can i use BAPI_SRM_DOC_GETLIST to get shopping card items/worklists

Similar Messages

Maybe you are looking for