How can I use keywords better?

Ok, I've looked everywhere and I can't seem to find anything. I switched to Aperture from iPhoto '09 with keyword Manager installed. The main purpose of which is heirarchial keywords, where I can have a nested keyword, and all the parent keywords get assigned automatically when assigning the nested keyword. I can't for the life of me find a way to mimic this in Aperture, even via 3rd party tools. Someone out there has to know a better way to do this. Help!
For example:
Cars
-Ford
--F-150
Assigning "F-150" will also assign "Ford" and "Cars" to the photo.

Tom
Unfortunately there is no way to do this that I have found. In the end I used Typinator (http://www.ergonis.com/products/typinator/) and made shortcuts for common groupings: for instance with my odd habit of shooting doorways and windows (go figure) they will have a common set of
door, architecture, architectural detail,
so I made a Short cut list specific to Aperture and assigned those three to /d so typing that gets me all three.
Obviously you can use the same for people Family name, Individual Name etc. I use the / to prevent accidentally adding the group when typing otherwise.
Then, using the Keyword HUD I found it surprisingly fast to drag and drop the extras.
Closest I could get... Would happily pay for a Keyword Manager for Aperture.
Regards
TD

Similar Messages

How can I use keyword in place of URL

Hi Guru!
I call my application by using the Full URL. Like :
http://192.168.0.333:7778/forms90/f90servlet?config=diag.
I want to use a keyword in place of the full URL. Like if write 'diag' only in the address bar of browser then it will be redirect to my application.
Please any help!!
Mokarem

Hello,
You can use a URL like :
http://192.168.0.333:7778/diag
if you configure the HTTP server (Apache in OAS) : RewriteURL
Regards

How can I use my array in another method.... Or better yet, what's wrong?

I guess I'll show you what I am trying to do rather and then explain it
public class arraycalc
int[] dog;
public void arraycalc()
dog = new int[2];
public void setSize(int size)
dog[1] = size;
public int getSize()
return dog[1];
This gives me a null pointer exception...
How can I use my array from other methods?

You have to make the array static. :)
Although I must admit, this is rather bad usage. What you want to do is use an object constructor to make this class an object type, and then create the array in your main class using this type, and then call the methods from this class to modify your array. Creating the array inside the other method leads to a whole bunch of other stuff that's ... well, bad. :)
Another thing: Because you're creating your array inside this class and you want to call your array from another class, you need to make the array static; to make it static, you must make your methods static. And according to my most ingenious computer science teacher, STATIC METHODS SUCK. :D
So, if you want to stick with your layout, it would look like:
public class arraycalc
     static int[] dog;
     public static void arraycalc()
          dog = new int[2];
     public static void setSize(int size)
          dog[1] = size;
     public static int getSize()
          return dog[1];
}But I must warn you, that is absolutely horrible code, and you shouldn't use it. In fact, I don't even know why I posted it.
You should definitely read up on OOP, as this problem would be better solved by creating a new object type.

HT1338 hi i am using mac os x 10.5.8 but this os is not supporting few software updates.so how can i get a better version of os?

hi i am using mac os x 10.5.8 but this os is not supporting few software updates.so how can i get a better version of os?,,this os not supporting google chrome and i tunes 7..

The next Mac OS version os 10.6.
Below is a link to some details how you can obtain that for your Mac.
https://discussions.apple.com/thread/4368218
After you upgrade to 10.6 and update to 10.6.8 you can buy version 10.8 online at the Mac App Store.
That will provide the basis for any of the latest software you now want.
Message was edited by: roam

My gf is one of those ppl with the horrible habbit of downloading anything and everything the internet tells her she needs how can i use FF to better protect her from the various virus she downloads on a regular basise

as i write this i have just restored my gf's computer back to default factory setings and cleaned the HD she has a horrible habbit of downloading anything and everything something tells her to download it her most recent actions caused her to dl a virus along with a prog called "flv tube" ive never heard of it but in less then 5 mins on google i found it to be common with viruses how can i use FF to prevent and or stop her from downloading all this crap so im not always having to fix it for her

Public Fox: https://addons.mozilla.org/firefox/addon/3911
Be aware that an extension can easily be bypassed by starting Firefox in [[Safe mode]] or by using the portable Firefox version.

How can i use one SQL statement to solve problem?

How can i use one SQL statement to solve the question below?
For a Table named A, there is a column named F(char type).
Now select all the records where F like '%00' and update their F value to '%01'
Just one SQL statement.Do not use PL/SQL block.
How to do that?
Thanks.

What is the data volume for this table?
Do you expect lots of rows to have '%00' as their value?
Following two statements come to mind. Other experts would be able to provide better alternatives:
If you have index on SUBSTR(f, 2):
UPDATE A
SET    f = SUBSTR(f,
                  1,
                  length(f) - 2) || '01'
WHERE substr(f,
              -2) = '00';If most of the rows have pattern '%00':
UPDATE A
SET    f = SUBSTR(f,
                  1,
                  length(f) - 2) ||
           DECODE(SUBSTR(f,
                         -2),
                  '00',
                  '01',
                  SUBSTR(f,
                         -2));

HT204053 My family owns 3 computers, how can we share, or better yet, centralize our music when we have 3 different apple ID?

My family owns 3 computers, how can we share, or better yet, centralize our music when we have 3 different Apple ID?
How can we sync all 3 computers music content on itunes Match? Even when only one purchases music?

Welcome to the Apple Community.
To begin with, I would like to try to explain Apple's confusing nomenclature in regard to iCloud.
Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud.
You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photosstream, it does not affect any of your iTunes services.
To avoid confusion when discussing your problem, when I mention iCloud, I am referring to the services under the iCloud login, Whereas I will refer to the whole cloud thing as The Cloud.
If only one of you purchases content from iTunes (this includes Books and apps too) then I suggest you use that account for each of you for iTunes only.

How can I use comma in the return values of a static list of values

Hi all,
I want to create a select list (static LOV) like the following:
Display Value / Return Value
both are "Y" / 'YY'
one is "Y" / 'YN','NY'
I write the List of values definition is like this:
STATIC:both are "Y"; 'YY',one is "Y";'YN', 'NY'
However, it is explain by htmldb like this:
Display Value / Return Value
both are "Y" / 'YY'
one is "Y" / 'YN'
/ 'NY'
I tried using "\" before the ",", or using single or double quote, but all these do not work:(
How can I use a comma in the return values?
Thanks very much!

"Better still, why not process the code of both Y with 2Y and one is Y with 1Y? "
Could you please explain in detail? thanks! I am quite new to htmldb
In fact I have a table which has too columns "a1" and "a2", both the values of these two columns are "Y" or "N". AndI want to choose the records that both a1 and a2 are "Y", or just one of a1, a2 is "Y".
So I write the report sql like this:
"select * from t1 where a1 || a2 in(:MYSELECTLIST) "
Thus, I need to use "," in the LOV, since expression list in IN(,,,) using ",".
Any other way to implement this?

How can i use microsoft office on the mAC - what app do i purchase? help?!!

how can i use microsoft office on the mAC - what app do i purchase? help?!!

What aspect of Microsoft Office? Office is a suite of programs... Word, Excel, Powerpoint, etc.
You've got several potential options. Libre Office and Open Office (both googleable) are 'open source,' free, downloadable programmes that will open most MS Office programmes and perform many of the functions of MS Office. Might be an idea to have a look round for reviews (etc) first, to see if they sound like they'll match your needs.
If you're keen to use the App Store, there's Apple's own suite of programmes: Pages, Numbers and Keynote. They're a word processor, spreadsheet programme, and presentation-type programme with similar functions to Word, Excel and Powerpoint respectively. They're pretty good for most functions, and are better integrated with Macs than MS programmes. They're excellent programmes for what they do, and relatively cheap (about £14 each?).
But if you're heavily reliant on MS, want ALL the bells and whistles of MS, or need to regularly transfer files between MS programmes on other computers and your laptop / desktop computer, then they might not be the best of ideas. Keynote - IME - can have some difficulties in transferring formatting to Powerpoint.
Finally, there's MS Office Mac 2011. You can't download MS Office from the App Store, but can order the CDs from most online stores (including Apple's own store). It might be worth price hunting - if you're a student, you can usually find the programmes relatively cheap (£38 at the moment on Software4Students, though you'll need to belong to an academic institution / have a UK .ac email address). Apple's own prices on MS software are unlikely to be the best prices out there (though the product will be identical).
MS Office includes Word, Excel and Powerpoint in the basic version. The slightly more expensive version (which, I think, is the £38 one on S4S) includes Outlook. Which - IME - is far more of a nuisance than Apple's native Mail programme.
(I should probably add - I'm an academic. I own both Apple's own programmes, and MS Office 2011. I tend to use the MS programmes more, if only because they're the ones that other people tend to use, and transferring between Apple and MS programmes is a minor inconvenience. Pages also lacks Garamond, my favourite work font. The Apple progs are, however, far more beautifully integrated, and would be MORE than good enough for most users...)

I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever?

I have an itunes account in Euro. I received iTunes and AppStore Gift Cards in $US. How can I use these on the same iWhatever and keep together music/apps bought in the 2 currencies?
Thx

Barbara Hunt wrote:
Would it be possible for me to download iTunes in Parallels and get the files into that and then onto my iPod?
Yes, you can download iTunes for Windows using Parallels. If planning on making purchases here and/or authorizing already purchased tracks (from your Mac iTunes library), you are permitted to authorize five (5) computers as per iTunes Store terms of use, regardless of computing platform. No need to create a separate new iTunes Store account.
However, judging from what you would like to do, your best bet would be to convert the WMAs to AAC/MP3 in iTunes-Windows (iTunes-Mac cannot import WMA files), and drag the files from the Parallels window to your desktop to add to the iTunes-Mac library. (as the iPod itself is currently linked to your iTunes-Mac library)
Hope this helps,
Steve

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How can i use a second router to replace verizon fios router?

Okay so just as the title says how do i use a second router? I got a cisco valet router... I don't know how to use it because the verizon router/modem is wierd i know how to use a router if i only had a modem but fios gives router/modem so how can i use my 2nd router? The current verizon fios router/modem is b/g mode and i wanna change to b/g/n so i can get a better speed from my internet... SO how can i use my 2nd router? I tried this http://www.dslreports.com/faq/verizonfios/3.0_Networking#12506 but i don't get it can someone guide me better or make a video explaination on how to use a 2nd router? I have it connected with see as in pic i connect from my router Internet port to wan port and the ethernet lan port to the ethernet lan port on verizon fios and no work please help...

OK, so with this, we have a few options. You appear to have a MoCa connection to the ONT, hence the coaxial cable being present.
1: The ActionTec can be bridged to the Valet router. This will not require any additional cabling, however it will require a small amount of work to have working. You will also require the ActionTec still in the mix, even though it will not be acting as a router anymore with this configuration.
Visit http://www.dslreports.com/faq/16077 and look at Option 4. There is a thread linked that will allow you to set up the ActionTec as just a MoCa bridge, and will pass the Public IP to your router. You will, in order for this to work once the ActionTec is bridged, need to connect the cable from your Valet router's Internet port, to the ActionTec's LAN port and nothing else goes to the ActionTec. From this point, your Valet should run as your primary and everything should connect through your Valet. If you are adding another router, a Netgear N300, you should perform the LAN to LAN setup, which we will talk about once you've got the Valet working correctly. LAN to LAN configs require a custom setup, so do not set up the Netgear for now.
2: This is my preferred method, which would be to run an Ethernet cable to the ONT. Option 6 in the FAQ. This will require spaking to Verizon to have them move your ONT to Ethernet, but once they do this, you can disconnect the Coaxial Cable from your ActionTec router, and plug in your CAT5/CAT6 cable from the ONT to the ActionTec's Internet/WAN port. Use the ActionTec to ensure everything is working after the switchover, and once off the phone, log into the ActionTec, perform a DHCP Release, and then prompty power off the ActionTec. Once this is done, plug the CAT6 cable into your Valet router's Internet port. You should from this point, be able to connect to the Cisco, and if the DHCP Lease was broken successfully, the Cisco should begin serving up your Internet connection. If it does not, leave the Cisco powered off for a few hours to break the DHCP lease, and then power it up. If the Valet does not work, still, give the Valet a factory reset and set up this router again, with the Ethernet cable from the ONT connected to it.
I would just take a good luck at the FAQ linked above again, and see what would work the best. Easiest thing to do is to get the ONT moved to Ethernet, which allows you to eliminate the ActionTec unless you need it in the future for TV service, and also allows you to use any router with ease.
Once the Valet is up and running and holds your Public IP address from Verizon (use http://whatismyip.com/ to determine this) , and also serves up IPs to devices on your network, post back and we can help you set up the Netgear. If you have any issues while setting this up, fall back to the ActionTec. It's factory reset will work without configuration needed, regardless of you being on Coax or Ethernet.
========
The first to bring me 1Gbps Fiber for $30/m wins!

HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
Thank you for any help you can provide.
Arup

This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
In the meantime..
Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
ie
You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

How can I use keywords better?

Similar Messages

Maybe you are looking for