How can Nokia Require a user to sign to install.

I want to install Fexplorer (just one example) and damn Nokia/Symbian requires me to sign the installation file in order to install it.
The problem is u cannot sign anything anymore because symbiansigned.com doesn't accept new users.
Will someone for the love of god with a reasonable mind tell me how the hell nokia and symbian motives this.
I am so furious!
Regards
Raptor

If you have an S60 3rd Edition based phone, then use Y-Browser instead (of FExplorer): http://www.drjukka.com/YBrowser.html
Also, Nokia or Symbian does not require users to sign the installation packages. It is the application developer that it supposed to do it for all users. If they don't, use some other developer's apps.
Message Edited by petrib on 03-Sep-200702:11 PM

Similar Messages

How can I create a user with rights to install packages on a publish instance?

Hi,
I am trying to create a user with the rights to upload and install content packages on a CQ publish instance and I do not wish to use the admin user. Simply adding a new user to the administrators group does not seem to be enough.
I tried adding a rep:GrantACE node through crx de/explorer but it reported the node as locked. I was able to upload a content package that removed the rep:DenyACE jcr:read for everyone, but this is not safe it seems.
Is there some special privilege that I need to add to my user/group that will allow them to access the /etc/packages tree or do I just need to add some permission somewhere within the tree.
Regards,
Chris

With some help from David Collie, Alex Klimetschek & Jörg Hoh I have a better idea of what is going on and we've found a solution.
It seems that the admin account always works in these scenarios as it has special privileges in the CRX security system; admin can do anything it likes.
Instead of creating the rep:GrantACE nodes directly, I was able to add a new ACL entry for the administrators group to /etc/packages via the Access Control Editor (http://localhost:4502/crx/explorer/ui/aceditor.jsp?ck=1373027669916&Name=acEditor&Path=%2F etc%2Fpackages&_charset_=utf-8).
Strangely, the administrators account already had some inherited rights on this directory that were overridden by the deny|everyone|jcr:read ACL entry on /etc/packages node. Adding allow:administrators|jcr:read gives any member of that group access to read and write to the /etc/packages. directory.
Now that I have setup this user we can setup a deploy step in out CI build that does not rely on using the admin account.
Thanks
Chris

How can I have multiple users on iTunes (in order to connect to a shared office iPad)?

How can I have multiple users on iTunes (in order to connect to a shared office iPad)? Currently each of us has our own iTunes account, so I've made an "all office" Apple ID. However, I can't seem to get two different accounts (my personal and the office) to work on my machine. Even when I login as "the office", my personal library is still showing. Additionally, when I try to setup with a first-time use in iTunes, I get an error that I don't meet the minimum age requirement - no matter what birthdate I enter!

The library exists regardless of which user is logged in.
The only way around that is to create different user accounts on the computer.
There is no way to have 20 unique iTunes users access a shared iTunes under a single login on the computer.

How can I distinguish special characters or signs in Doc through VBA?

How can I distinguish special characters or signs in Doc through VBA?
I have a few large documents written in word 2003 format and now I work on them under word 2007.
Such large documents containing lots of special characters. I want to change them into Microsoft 3.0 equation form（It is required by the team). I find no way but using function AddOLEObject and Sendkeys through VBA. Common characters can be added
to equation by function Sendkeys, but the return value of Asc() or AscW() for "double arrow", "in" , " not greater than " such special characters or signs, to name but a few are the same ,i.e., 40 And I cannot distinguish them.
I found the link http://msdn.itags.org/word/44333/ may be of use to me, and the title is:
How to read symbols from a DOC documents! (Microsoft Word)
the original question is
Using function "InsertSymbol", I can insert a symbol into a document. But
how can I read a symbol from a document?
Using "Characters(i).range.text", I can read a char. But when meeting a
symbol, the value of "Characters(i).range.text" is always '('.How can I get the CharacterNumber of the symbol.
And the final answer is :
Hi chenfeng,
Word protects symbols from symbol fonts if you insert them from the "Insert
> Symbol" dialog.
This is done so they aren't changed when you change the font or style. But
it also results in Word reporting AscW( ) = 40 on all of them.
I've posted a macro to "unprotect" them (or to protect them again if you
want) ... just today again in
Newsgroups: microsoft.public.word.vba.customization
Subject: Symbol Characters
Date: Mon, 3 May 2004 11:00:46 -0700
Message-ID: <09f401c43138$8f92f900$[email protected]>
It isn't archived on Google yet, but tomorrow you should be able to simply
copy the message ID into http://www.google.com/advanced_group_search.
Regards,
Klaus
But the link for the macro in the final answer is missing.
Can anyone with kindness help me? Thaks a lot.

Following Cindy Meister's Advice ,I use MathType SDK.
The sample in MathType SDK in the following may be meaningful,but I do not know how the MTEF for cos^^2Theta, MTEF for sin^^2Theta and MTEF for 1 are generated .
It looks much complicated,and I searched the docs in MathType SDK to get a explanation.Is there any function to generate them? I want to use this method to change commaon text mathematical signs( in special character table) and Greek letters and characters
with subscripts and superscripts to Microsoft 3.0 equation form.
Can anyone with kindness help me?
Sub MTEFTextSubstitution()
    Dim MTEFStr1$, MTEFStr2$, MTEFStr3$
    Dim stat
    'MTEF for cos^^2Theta
    MTEFStr1$ = "% MathType!MTEF!2!1!+-" + _
        " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
        " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
        " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
        " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
        " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaci4yaiaac+" + _
        " % gacaGGZbWaaWbaaSqabeaacaaIYaaaaOGaeqiUdehaaa!3B65!"
    'MTEF for sin^^2Theta
    MTEFStr2$ = "% MathType!MTEF!2!1!+-" + _
        " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
        " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
        " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
        " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
        " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaci4CaiaacM" + _
        " % gacaGGUbWaaWbaaSqabeaacaaIYaaaaOGaeqiUdehaaa!3B6A!"
    'MTEF for 1
    MTEFStr3$ = "% MathType!MTEF!2!1!+-" + _
        " % feaaeaart1ev0aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn" + _
        " % hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr" + _
        " % 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9" + _
        " % vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x" + _
        " % fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaaGymaaaa!36A4!"
    Selection.Copy
    'Init API, reset transform
'    If MTUtil.CheckMTDLLVersion = 0 Then Exit Sub
    If Not IsDLLVersionOK() Then Exit Sub
    MTXFormReset
    'first substitution
    stat = MTXFormAddVarSub( _
        mtxfmSUBST_ONE, _
        mtxfmVAR_SUB_PLAIN_TEXT, "<v1>", 0, _
        mtxfmVAR_SUB_MTEF_TEXT, MTEFStr1$, Len(MTEFStr1$), 0)
    If stat <> 0 Then
        MsgBox "1st MTXFormAddVarSub returned: " + Str(stat)
        Exit Sub
    End If
    'second substitution
    stat = MTXFormAddVarSub( _
        mtxfmSUBST_ONE, _
        mtxfmVAR_SUB_PLAIN_TEXT, "<v2>", 0, _
        mtxfmVAR_SUB_MTEF_TEXT, MTEFStr2$, Len(MTEFStr2$), 0)
    If stat <> 0 Then
        MsgBox "2nd MTXFormAddVarSub returned: " + Str(stat)
        Exit Sub
    End If
    'third substitution
    stat = MTXFormAddVarSub( _
        mtxfmSUBST_ONE, _
        mtxfmVAR_SUB_PLAIN_TEXT, "<v3>", 0, _
        mtxfmVAR_SUB_MTEF_TEXT, MTEFStr3$, Len(MTEFStr3$), 0)
    If stat <> 0 Then
        MsgBox "3rd MTXFormAddVarSub returned: " + Str(stat)
        Exit Sub
    End If
    'do the substitution
    stat = TransformGraphicEquation
    If stat <> 0 Then
        MsgBox "TransformGraphicEquation returned: " + Str(stat)
        Exit Sub
    End If
    MTTermAPI
    'Paste new equation
    Selection.Collapse Direction:=wdCollapseEnd
    Selection.PasteSpecial Placement:=wdInLine
End Sub

I bought 26 new songs under my work e-mail and now i can't copy them to my i-pod because it has another music library on it. How can i combine both user id's to the same purchased account

I have 2 user id's with apple, i bought 26 songs from my laptop recently using my work e-mail. I plug my i-pod to sync it and it says that my i-pod is tuned with another library. i don't want to erase the songs I have already because they are about 760 and the new ones are 26 only. how can I combine both user id's and consolidate all the music into one user id?
everytime i try to do something it asks me to reset the password. I have done it already 6 times.
there is no phone # to call.
Thanks
Elena

Alright, please follow these steps in order to get it working properly again.
Please change your Apple ID back to your old email address (that you used as Apple ID before) here: http://appleid.apple.com
Then go to all your devices - iPhones, iPads, Mac etc. - ("Settings > iCloud") and delete your iCloud account from this devices (+ turn off Find My iPhone, but I guess it will ask you that anyway)
After that go back to http://appleid.apple.com sign in again, and now change your Apple ID again to your new email address.
Finally, set up your iCloud account on all your devices again.
Now, everything should working properly again.

How can I change an user username

Hi,
Please anyone tell me how can I change an user username. I need to do that because I have a .dmp with the same username as the one I already have in my database and I need to use the both.
Thank you

You can just create your new user as required, then do an import with the parameters
fromuser=olduser touser=newuser
plus whatever other parameters you require.
TTFN
John

How can I get my App Store sign in to match my newly updated Apple ID?

How can I get my App Store sign in to match my newly updated Apple ID?
The old ID is already grayed in the box for my ID and it does not allow me to type in my new ID.

I appreciate your effort and realize I did not provide a lot of background.
My issue began when I unintentionally managed to add an additional .com onto my new apple ID and the system then incorrectly verified this "none existent" address. Following days of effort and emails to Apple support I finally ended up getting set up with my new ID on iTunes.
The next problem was my App store login continued to have the "old" ID grayed into the signin and since I had changed it to a new ID, I could not login at the App Store.
I spent about 20 minutes on the phone with a total of 3 Apple reps without a resolution to me problem.
The last Apple rep, Chad wanted to be able to take a screen shot of what I was telling him, which made no sense to me but I was willing to do what ever was required to solve the problem. Unfortunately, Chad hung up or somehow disconnected before I received the email required for allowing a screenshot. After calling back and adding another 5+ minutes invested, I decided to attempt to change back to my old ID.
Once I had changed my ID back to the old one, I could download updates and purchases.
I realize my question was asking a lot but my hope was someone would have some idea as to how to correct the problem Apple Support could not. It seems to me Apple needs to make a correction on their end but it is now into week two of attempting to solve the problem and I am pretty much disenchanted with Apple Support due to the amount of time and effort already invested and lack of progress.
Thanks for your suggestion. I think it was a good one considering the lack of other information.
Message was edited by: lb4318

How can I allow a user (client) to choose a local image file (on his hard d

How can I allow a user (client) to choose a local image file (on his hard drive) and modify it using an applet from his browser ? I am trying to develop a web page that enables the user to choose an Image file, manipulate the image using a java applet, and display the results.
Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. On the other hand, I can choose and upload any file using a JavaScript form:
<FORM METHOD="POST" ENCTYPE="multipart/form-data" ACTION="process.asp">
<INPUT TYPE=FILE NAME="file1"><BR>
�
It seems that I can choose an image file with a Java script form and process an image with an applet. How can I choose a file AND process it locally ?
(I do not wish to upload the file to the server using JavaScript form and then back to the client�s applet for processing since it will be a tremendous waste of resources).
Will appreciate any solution.
Thanks !
( my email is: [email protected] )

"Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. "
You can do this if you sign the applet...

How can I find out user id who has deleted payment order

Issue : After payment run, the required information has been sent as Idoc to the bank. So, we know the payment order number. We observed that another payment run also has picked up this vendor invoice and made payment.
Usually Payment Sent will be marked X until the related information comes in the form of bank statement upload and this amount gets cleared.
We noticed that bank has made two payments for this amount to this vendor on different dates :- a) when the payment order supposed to be paid as per the payment terms and b) when second paymnet run paid the amount [ this time it got paid directly as there is long due amount ].
From SAP APP angle, both the payment run worked fine and also the calcaltion of payment terms as well.
So, we come to conculsion that someone has deleted the payment order from the system. Thats the reason this invoice got picked up by 2nd APP and paid the amount.
Where we could not find the related entry in REGUH/REGUP tables for this payment order and no document changes.
Question: How can I find out user id who has deleted payment order. Appreciate any clue / answer for this issue please.
Thank you
Sri

Hello,
Not sure about deletion logs. =/
Idea:
What if an error occured during the first payment? Have you checked sm13 to check if any update termination occured in the payment program?
Regards,
Renan

How can I retrive current user information in Content Server's presetation template?

We need to determine current user is the item's created user or not, so we want to know how to do this?
we can use <pcs:if expr="'Luke' == createdBy">....,but the 'Luke' is static string,
so, how can I retirve current user name in Content Server's presetation tempalte?

I don't know that this is possible in a direct fashion. (and, btw - thank you for asking this question. I realized we'll eventually need exactly the same thing so looking at this helps me as well :).
I'm quoting dev support from another posting on making community comparisons dynamic:
"This won't work because the pcs: tags are evaluated on the Content Server during the publish operation, resulting in a static HTML file that still contains the raw pt: tags. This same HTML file will be displayed in all of your communities. The pt: tags are evaluated on the portal server right before it returns content to the user, this allows the single HTML file to show a different name in each community. "
So the gist of things is that content server acts dynamic to you and I through the editing UI, but is really publishing static content. The values at run-time are not directly available to the PCS operators because...well...the PCS stuff is already done. It produced the static HTML showing up in the portlet.
There appear to be two immediate options:
Use the transformer tags to publish the user's name at run-time. Have the PCS and Transformer tags write their values into javascript strings and then compare this client-side. My response: "meh" Not for the purist, but I'm so far down the non-purist path at this point it just doesn't matter any more to me. Simple and to the point, but has known risks. Probably the easiest way to go.Publish your page as ASPX or JSP and then use the EDK server-side to manage the comparisons. Definitely more server-centric, but does require you do a quick bit of content server configuration. Just set the publishing target for the portlet to a directory on a web server and then set the publishing file extension to .ASPX or .JSP. I've done this with ASP and it works nicely. :)Not entirely the answer you or I were looking for, but I think it makes sense.
The PT transformer tags you'll want if you go with option (1) are:
Get the user's full name
<pt:userinfo xmlns:pt="http://www.plumtree.com/xmlschemas/ptui/" name="FullName" />
Get a custom user setting "myUserSetting"
<pt:userSetting name="myUserSetting" xmlns:pt="http://www.plumtree.com/xmlschemas/ptui/" />
Plumtree - am I off base on this one?
Thanks,
Eric

How can i change the user on FaceTime? im trying to do this on a iMac

how can i change the user on FaceTime? im trying to do this on a iMac

I'm using an iMac with OSX 10.6.8. The proceedure on your system is probably similar.
Get the Facetime window up, and go to Facetime preferences. Click on "account," you'll see a view account option that will prompt you to sign in with your Apple id and password. From there you can make the changes that you want.

How can I change my user name on my iPhone 4S running )OS 8.1.1 so I can update my Apps

How can I change my user name on my iPhone 4S running OS 8.1.1 so I can update my Apps?

Hi jprohask63,
Welcome to the Apple Support Communities!
If you have applications that were originally downloaded from a different Apple ID, you would need to sign out of the current Apple ID and sign in to the Apple ID that was used originally to download the application. To complete this process please follow the instructions provided in the attached article.
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store - Apple Support
Cheers,
Joe

How can i add addtional user defiend fields in infoset

Hi,
Can any one tell me how can i add addtional user defiend fields in infoset and make it availible in output screen.
Also please tell me to create parameters through abap quary sq02 , as by default it creates select-option.
With Thanks n Regards,
Ranu

Hi,
As I said before it is not that straight forward.If you will decompile tcViewProfileAction .class using any java decompiler you will find out that data in setAccountProfile method is not getting set through formmetadata.xml . If you are well verse with struts then only you can achieve what you are trying to do.You need to extend tcViewProfileAction class and also tcViewProfileForm class and then you need to modify tjspViewProfileTiles.jsp .It will not be easy job.Usually in implementation we do not change action class until its absolutely required as oracle also do not recommend that so now its between you and your client to make a call if they want to go for such customization.I won't recommend you do that.
Regards
Nitesh

How can I have multiple users on one apple id?

How can I have multiple users on one apple ID?
ie: I have my apple ID with my own credit, how can I set up credit for my son under the same apple ID, so that he can still access the same apps I've already downloaded and paid for?

I've been trying to figure out a clean way to do this too. I think you may need more than one Apple ID – one that is shared and used to purchase "sharable" items and then "individual" Apple IDs for you and your son. That's the idea that I'm pursuing for the moment.
It seems that there must be a way to do this, App Store purchases for the Mac are licensed across multiple machines. iPhone app purchases have "all your devices" licensing. Makes me think that Apple has a process in mind for sharing an account (or associating a device with multiple accounts).
Other things I've learned:
- Apparently you can't merge Apple ID accounts. I asked about this once at an Apple Store and was told that there was no way to do it.
- If you share an Apple ID the Messages app behaves in a somewhat surprising manner. It must use your Apple ID to decide where messages should be sent because all users get all messages. This can make it very hard to organize a surprise party :-)

How can I allow other users on my macbook to view my iphoto library when th

How can I allow other users on my macbook to view my iphoto library when they are logged in. I do not have a network, and the users (my family) all log in seperately when they use the computer. Does anyone know? Thank you.

rdoss
Welcome to the Apple Discussions.
If you want others to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account(s). In the other account(s), enable 'Look For Shared Libraries'. Your Library will appear in their source pane.
Remember iPhoto must be running in both accounts for this to work.
Regards
TD

How can Nokia Require a user to sign to install.

Similar Messages

Maybe you are looking for