How can validate the ASM size and free space correctly?
Dears ,,
I faced problem in ASM size as it appeared in alert file as below
ORA-19504: failed to create file "+DG_DATA"
ORA-17502: ksfdcre:4 Failed to create file +DG_DATA
ORA-15041: diskgroup space exhausted
So we resize ASM space and large it. But we faced the same problem also although there is free space in ASM.
It seems that the shown free space is not real.
How can validate the ASM size and free space correctly?
Thanks & Regards,,
*Oracle DBA* wrote:
Dears ,,
I faced problem in ASM size as it appeared in alert file as below
ORA-19504: failed to create file "+DG_DATA"
ORA-17502: ksfdcre:4 Failed to create file +DG_DATA
ORA-15041: diskgroup space exhausted
So we resize ASM space and large it. But we faced the same problem also although there is free space in ASM.
It seems that the shown free space is not real.
How can validate the ASM size and free space correctly?
Thanks & Regards,,
I was having this problem. Im my case i couldn add datafiles to a tablespace despite the fact that i was having a lot of space in the asm. Try rebalancing. It might help. In my case rebalancing also didn work because it seems that there need to be a threshold space in all the disks for the rebalancing to happen which was not in my case, so i had to shrink some unused space in the tablespace and then after gaining the required space I rebalanced the disk and then the disks got rebalanced, also i was able to use the free space that was showing .
Similar Messages
-
How to know the image size and coding of our j2me project
Hi,
I have developed a game and i did the obfuscation. My jar size is now 170KB. How can differentiate the coding size and the image size from the total jar size.
If i asked any thing wrongly, please forgive me and clarify my doubt.
I am looking forward to meet ur queries if any.
Thanks and Regards,
Hithayath.<?xml version="1.0" encoding="UTF-8"?>
<!-- *** GENERATED FROM project.xml - DO NOT EDIT *** -->
<project xmlns:projdeps2="http://www.netbeans.org/ns/ant-project-references/2" basedir=".." default="jar" name="-impl">
<target name="pre-init"/>
<target depends="pre-init" name="pre-load-properties">
<property file="nbproject/private/private.properties"/>
<property value="0.0.1" name="deployment.number"/>
<property value="000002" name="deployment.counter"/>
<property location="${netbeans.user}/build.properties" name="user.properties.file"/>
<available file="${user.properties.file}" property="user.properties.file.exists"/>
</target>
<target unless="config.active" depends="pre-load-properties" name="exists.config.active">
<echo message="Active configuration (config.active property) is not set - using default." level="warning"/>
<property name="config.active" value=""/>
</target>
<target unless="netbeans.user" depends="pre-load-properties" name="exists.netbeans.user">
<echo message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically." level="warning"/>
</target>
<target unless="user.properties.file.exists" depends="pre-load-properties" name="exists.user.properties.file">
<echo message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)." level="warning"/>
</target>
<target depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file" name="load-properties">
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex replace="\1" pattern="^configs\.${config.active}\.(.*)"/>
<concatfilter prepend="nbproject/project.properties"/>
<containsregex pattern="^platform.active=|^deployment.method="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="${user.properties.file}">
<filterchain>
<replaceregex replace="platform." pattern="^platforms\.${platform.active}\."/>
<replaceregex replace="deployment.scriptfile=" pattern="^deployment\.${deployment.method}\.scriptfile="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex replace="\1" pattern="^configs\.${config.active}\.(.*)"/>
<concatfilter prepend="nbproject/project.properties"/>
</filterchain>
</loadproperties>
</target>
<target unless="platform.active" depends="load-properties" name="exists.platform.active">
<echo message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)." level="warning"/>
</target>
<target depends="load-properties" unless="platform.configuration" name="exists.platform.configuration">
<echo message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration." level="warning"/>
<property value="CLDC-1.0" name="platform.configuration"/>
</target>
<target depends="load-properties" unless="platform.profile" name="exists.platform.profile">
<echo message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile." level="warning"/>
<property value="MIDP-1.0" name="platform.profile"/>
</target>
<target depends="pre-init,load-properties,exists.platform.active,exists.platform.configuration,exists.platform.profile" name="init">
<fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-modules-kjava-antext.jar file in the IDE installation directory.</fail>
<fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
<fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
<fail unless="src.dir">Must set src.dir</fail>
<fail unless="build.dir">Must set build.dir</fail>
<fail unless="build.classes.dir">Must set build.classes.dir</fail>
<fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
<fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<fail unless="dist.dir">Must set dist.dir</fail>
<fail unless="dist.jar">Must set dist.jar</fail>
<fail unless="dist.jad">Must set dist.jad</fail>
<fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
<fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
<fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>
<property value="" name="abilities"/>
<property value="" name="obfuscator.classpath"/>
<property value="" name="kjava.configuration"/>
<property value="UEI-1.0" name="platform.type"/>
<property value="" name="platform.device"/>
<property value="0" name="obfuscation.level"/>
<property value="false" name="sign.enabled"/>
<property value="file://" name="dist.jad.url"/>
<property value="1.3" name="javac.source"/>
<property value="1.1" name="javac.target"/>
<property value="${file.encoding}" name="javac.encoding"/>
<condition property="no.deps">
<istrue value="${no.dependencies}"/>
</condition>
<condition property="no.javadoc.preview">
<isfalse value="${javadoc.preview}"/>
</condition>
<condition value="${filter.excludes},**/*Test.java,**/test,**/test/**" property="filter.excludes.evaluated">
<istrue value="${filter.exclude.tests}"/>
</condition>
<property value="${filter.excludes}" name="filter.excludes.evaluated"/>
<condition value="" property="evaluated.run.security.domain">
<isfalse value="${run.use.security.domain}"/>
</condition>
<condition value="" property="deployment.do.override.jarurl">
<istrue value="${deployment.override.jarurl}"/>
</condition>
<property value="${run.security.domain}" name="evaluated.run.security.domain"/>
<taskdef resource="org/netbeans/modules/kjava/antext/defs.properties">
<classpath>
<pathelement path="${libs.j2me_ant_ext.classpath}"/>
</classpath>
</taskdef>
<uptodate targetfile="${preprocessed.dir}/.timestamp" property="no.clean.before.build">
<srcfiles dir="nbproject">
<include name="project.properties"/>
<include name="build-impl.xml"/>
</srcfiles>
</uptodate>
<condition property="skip.deployment">
<equals trim="true" casesensitive="false" arg2="NONE" arg1="${deployment.method}"/>
</condition>
<condition property="skip-sign-keystore-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.keystore.password"/>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore.password}"/>
</not>
</and>
</or>
</condition>
<condition property="skip-sign-alias-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.alias"/>
<isset property="sign.alias.password"/>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.alias}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.alias.password}"/>
</not>
</and>
</or>
</condition>
<antcall inheritrefs="true" inheritall="true" target="post-init"/>
</target>
<target name="post-init"/>
<target name="deps-jar" depends="init" unless="no.deps"/>
<target description="Clean project in case its meta information has changed." unless="no.clean.before.build" depends="init" name="conditional-clean">
<antcall target="do-clean" inheritall="true" inheritrefs="true"/>
</target>
<target name="pre-preprocess"/>
<target description="Preprocess project sources." depends="init,pre-preprocess,deps-jar,conditional-clean" name="preprocess">
<mkdir dir="${preprocessed.dir}"/>
<echo file="${preprocessed.dir}/.timestamp" message="ignore me"/>
<nb-prep encoding="${javac.encoding}" preprocessfor="${config.active},${abilities}" destdir="${preprocessed.dir}">
<fileset excludes="${filter.excludes.evaluated}" defaultexcludes="${filter.use.standard}" dir="${src.dir}"/>
</nb-prep>
<antcall inheritrefs="true" inheritall="true" target="post-preprocess"/>
</target>
<target name="post-preprocess"/>
<target description="Extracts all bundled libraries." depends="init,deps-jar,conditional-clean" name="extract-libs">
<mkdir dir="${build.classes.dir}"/>
<nb-extract excludeManifest="true" dir="${build.classes.dir}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</nb-extract>
</target>
<target name="pre-compile"/>
<target description="Compile project classes." depends="init,preprocess,extract-libs,pre-compile" name="compile">
<mkdir dir="${build.classes.dir}"/>
<javac encoding="${javac.encoding}" bootclasspath="${platform.bootclasspath}" srcdir="${preprocessed.dir}" destdir="${build.classes.dir}" debug="${javac.debug}" optimize="${javac.optimize}" deprecation="${javac.deprecation}" target="${javac.target}" source="${javac.source}" includeantruntime="false">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<copy todir="${build.classes.dir}">
<fileset excludes="${filter.excludes.evaluated},${build.classes.excludes}" defaultexcludes="${filter.use.standard}" dir="${src.dir}"/>
</copy>
<antcall inheritrefs="true" inheritall="true" target="post-compile"/>
</target>
<target name="post-compile"/>
<target name="pre-compile-single"/>
<target description="Compile selected project classes." depends="init,preprocess,extract-libs,pre-compile-single" name="compile-single">
<fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
<mkdir dir="${build.classes.dir}"/>
<javac encoding="${javac.encoding}" includes="${javac.includes}" bootclasspath="${platform.bootclasspath}" destdir="${build.classes.dir}" srcdir="${preprocessed.dir}" debug="${javac.debug}" optimize="${javac.optimize}" deprecation="${javac.deprecation}" target="${javac.target}" source="${javac.source}" includeantruntime="false">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<antcall inheritrefs="true" inheritall="true" target="post-compile-single"/>
</target>
<target name="post-compile-single"/>
<target depends="init" name="create-jad">
<mkdir dir="${build.dir}"/>
<dirname property="dist.jad.dir" file="${dist.dir}/${dist.jad}"/>
<mkdir dir="${dist.jad.dir}"/>
<condition value="${manifest.apipermissions}" property="evaluated.manifest.apipermissions">
<not>
<equals arg2="MIDP-1.0" arg1="${platform.profile}"/>
</not>
</condition>
<condition value="${manifest.pushregistry}" property="evaluated.manifest.pushregistry">
<not>
<equals arg2="MIDP-1.0" arg1="${platform.profile}"/>
</not>
</condition>
<condition property="contains.manifest.configuration">
<contains string="${manifest.others}" substring="MicroEdition-Configuration: "/>
</condition>
<condition property="contains.manifest.profile">
<contains string="${manifest.others}" substring="MicroEdition-Profile: "/>
</condition>
<property name="evaluated.manifest.apipermissions" value=""/>
<property name="evaluated.manifest.pushregistry" value=""/>
<property value="" name="manifest.jad"/>
<property value="" name="manifest.manifest"/>
<echo file="${dist.dir}/${dist.jad}">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</echo>
<echo file="${build.dir}/manifest.mf">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</echo>
<antcall inheritrefs="true" inheritall="true" target="add-configuration"/>
<antcall inheritrefs="true" inheritall="true" target="add-profile"/>
</target>
<target unless="contains.manifest.configuration" name="add-configuration">
<echo append="true" file="${dist.dir}/${dist.jad}">MicroEdition-Configuration: ${platform.configuration}
</echo>
<echo append="true" file="${build.dir}/manifest.mf">MicroEdition-Configuration: ${platform.configuration}
</echo>
</target>
<target unless="contains.manifest.profile" name="add-profile">
<echo append="true" file="${dist.dir}/${dist.jad}">MicroEdition-Profile: ${platform.profile}
</echo>
<echo append="true" file="${build.dir}/manifest.mf">MicroEdition-Profile: ${platform.profile}
</echo>
</target>
<target name="pre-obfuscate"/>
<target description="Up-to-date check before obfuscation." depends="init,compile" name="obfuscate-check">
<uptodate targetfile="${obfuscator.destjar}" property="no.obfusc">
<srcfiles dir="${build.classes.dir}"/>
</uptodate>
</target>
<target unless="no.obfusc" description="Obfuscate project classes." depends="init,compile,obfuscate-check,pre-obfuscate" name="obfuscate">
<dirname property="obfuscator.srcjar.dir" file="${obfuscator.srcjar}"/>
<dirname property="obfuscator.destjar.dir" file="${obfuscator.destjar}"/>
<mkdir dir="${obfuscator.srcjar.dir}"/>
<mkdir dir="${obfuscator.destjar.dir}"/>
<jar basedir="${build.classes.dir}" jarfile="${obfuscator.srcjar}"/>
<property value="" name="obfuscation.custom"/>
<nb-obfuscate extraScript="${obfuscation.custom}" obfuscationLevel="${obfuscation.level}" classpath="${platform.bootclasspath}" obfuscatorclasspath="${obfuscator.classpath}" destjar="${obfuscator.destjar}" srcjar="${obfuscator.srcjar}"/>
<mkdir dir="${obfuscated.classes.dir}"/>
<unjar dest="${obfuscated.classes.dir}" src="${obfuscator.destjar}"/>
<antcall inheritrefs="true" inheritall="true" target="post-obfuscate"/>
</target>
<target name="post-obfuscate"/>
<target name="pre-preverify"/>
<target description="Preverify project classes." depends="init,compile,obfuscate,pre-preverify" name="preverify">
<mkdir dir="${preverify.classes.dir}"/>
<nb-preverify commandline="${platform.preverifycommandline}" platformtype="${platform.type}" platformhome="${platform.home}" configuration="${platform.configuration}" classpath="${platform.bootclasspath}" destdir="${preverify.classes.dir}" srcdir="${obfuscated.classes.dir}"/>
<antcall inheritrefs="true" inheritall="true" target="post-preverify"/>
</target>
<target name="post-preverify"/>
<target unless="skip-sign-keystore-password-input" if="netbeans.home" depends="init" name="set-keystore-password">
<nb-enter-password passwordproperty="sign.keystore.password" keystore="${sign.keystore}"/>
</target>
<target unless="skip-sign-alias-password-input" if="netbeans.home" depends="init" name="set-alias-password">
<nb-enter-password passwordproperty="sign.alias.password" keyalias="${sign.alias}" keystore="${sign.keystore}"/>
</target>
<target name="pre-jar"/>
<target description="Build jar and application descriptor." depends="init,preverify,create-jad,set-keystore-password,set-alias-password,pre-jar" name="jar">
<dirname property="dist.jar.dir" file="${dist.dir}/${dist.jar}"/>
<mkdir dir="${dist.jar.dir}"/>
<jar manifest="${build.dir}/manifest.mf" jarfile="${dist.dir}/${dist.jar}" compress="${jar.compress}">
<fileset dir="${preverify.classes.dir}"/>
<fileset dir="${obfuscated.classes.dir}">
<exclude name="**/*.class"/>
</fileset>
</jar>
<nb-jad aliaspassword="${sign.alias.password}" alias="${sign.alias}" keystorepassword="${sign.keystore.password}" keystore="${sign.keystore}" sign="${sign.enabled}" url="${dist.jar}" jarfile="${dist.dir}/${dist.jar}" jadfile="${dist.dir}/${dist.jad}"/>
<antcall inheritrefs="true" inheritall="true" target="post-jar"/>
</target>
<target name="post-jar"/>
<target description="Rebuild the application." depends="init,clean,jar" name="rebuild"/>
<target description="Run MIDlet suite." depends="init,jar" name="run">
<nb-run commandline="${platform.runcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" platformtype="${platform.type}" platformhome="${platform.home}" device="${platform.device}" jadurl="${dist.jad.url}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target description="Quick Run already built MIDlet suite." depends="init" name="run-no-build">
<nb-run commandline="${platform.runcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" platformtype="${platform.type}" platformhome="${platform.home}" device="${platform.device}" jadurl="${dist.jad.url}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target depends="init,clean,jar" description="Debug project." name="debug">
<delete file="${preprocessed.dir}/.timestamp"/>
<parallel>
<nb-run commandline="${platform.debugcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" jadfile="${dist.dir}/${dist.jad}" device="${platform.device}" platformhome="${platform.home}" platformtype="${platform.type}" debuggeraddressproperty="jpda.port" debugserver="true" debugsuspend="true" debug="true"/>
<sequential>
<sleep seconds="5"/>
<antcall target="nbdebug"/>
</sequential>
</parallel>
</target>
<target if="netbeans.home" description="Start NetBeans debugger" name="nbdebug">
<nb-kjava-debug period="2000" timeout="30000" name="${app.codename}" address="${jpda.port}">
<bootclasspath>
<path path="${platform.bootclasspath}"/>
</bootclasspath>
<classpath>
<path path="${dist.dir}/${dist.jar}"/>
</classpath>
<sourcepath>
<path path="${src.dir}"/>
<path path="${libs.src.path}"/>
</sourcepath>
</nb-kjava-debug>
</target>
<target depends="init,preprocess" name="javadoc">
<mkdir dir="${dist.javadoc.dir}"/>
<javadoc private="${javadoc.private}" windowtitle="${javadoc.windowtitle}" version="${javadoc.version}" author="${javadoc.author}" splitindex="${javadoc.splitindex}" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" use="${javadoc.use}" notree="${javadoc.notree}" bootclasspath="${platform.bootclasspath}" destdir="${dist.javadoc.dir}" source="${javac.source}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
<sourcepath>
<pathelement location="${preprocessed.dir}"/>
</sourcepath>
<fileset dir="${preprocessed.dir}"/>
</javadoc>
<antcall target="browse-javadoc"/>
</target>
<target unless="no.javadoc.preview" if="netbeans.home" name="browse-javadoc">
<nbbrowse file="${dist.javadoc.dir}/index.html"/>
</target>
<target name="pre-clean"/>
<target description="Clean build products." if="no.clean.before.build" depends="init,conditional-clean" name="clean">
<antcall inheritrefs="true" inheritall="true" target="do-clean"/>
</target>
<target depends="pre-clean" name="do-clean">
<delete dir="${preprocessed.dir}"/>
<delete dir="${build.classes.dir}"/>
<delete file="${obfuscator.srcjar}"/>
<delete file="${obfuscator.destjar}"/>
<delete dir="${obfuscated.classes.dir}"/>
<delete dir="${preverify.classes.dir}"/>
<delete file="${build.dir}/manifest.mf"/>
<delete file="${dist.dir}/${dist.jar}"/>
<delete file="${dist.dir}/${dist.jad}"/>
<delete dir="${dist.javadoc.dir}"/>
<antcall inheritrefs="true" inheritall="true" target="post-clean"/>
</target>
<target name="post-clean"/>
<target name="pre-deploy"/>
<target if="deployment.do.override.jarurl" depends="init,jar,pre-deploy" name="override-jad">
<property value="${dist.jar}" name="deployment.jarurl"/>
<nb-jad aliaspassword="${sign.alias.password}" alias="${sign.alias}" keystorepassword="${sign.keystore.password}" keystore="${sign.keystore}" sign="${sign.enabled}" url="${deployment.jarurl}" jarfile="${dist.dir}/${dist.jar}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target unless="skip.deployment" if="deployment.method" depends="init,jar,override-jad,pre-deploy" name="deploy">
<fail unless="deployment.scriptfile">Property deployment.${deployment.method}.scriptfile not set. The property should point to an Ant script providing ${deployment.method} deployment.</fail>
<ant inheritrefs="true" inheritall="true" antfile="${deployment.scriptfile}">
<property location="${dist.dir}/${dist.jad}" name="deployment.jad"/>
<property location="${dist.dir}/${dist.jar}" name="deployment.jar"/>
</ant>
<propertyfile file="nbproject/private/private.properties">
<entry pattern="000000" default="2" operation="+" type="int" key="deployment.counter"/>
<entry value="${deployment.counter}" key="deployment.number"/>
</propertyfile>
<replaceregexp replace="deployment.number=\2\3.\5\6.\8\9" match="^deployment.number=[0-9]*(0|([1-9]))([0-9])(0|([1-9]))([0-9])(0|([1-9]))([0-9])$" file="nbproject/private/private.properties" byline="true"/>
<antcall inheritrefs="true" inheritall="true" target="post-deploy"/>
</target>
<target name="post-deploy"/>
<target name="for-all-configs">
<antcall inheritrefs="false" inheritall="false" target="${target.to.call}">
<param value="" name="config.active"/>
</antcall>
</target>
<target name="jar-all">
<antcall target="for-all-configs">
<param value="jar" name="target.to.call"/>
</antcall>
</target>
<target name="javadoc-all">
<antcall target="for-all-configs">
<param value="javadoc" name="target.to.call"/>
</antcall>
</target>
<target name="deploy-all">
<antcall target="for-all-configs">
<param value="deploy" name="target.to.call"/>
</antcall>
</target>
<target name="rebuild-all">
<antcall target="for-all-configs">
<param value="rebuild" name="target.to.call"/>
</antcall>
</target>
<target depends="load-properties" name="clean-all">
<fail unless="build.root.dir">Property build.root.dir is not set. By default its value should be \"build\".</fail>
<fail unless="dist.root.dir">Property dist.root.dir is not set. By default its value should be \"dist\".</fail>
<delete dir="${build.root.dir}"/>
<delete dir="${dist.root.dir}"/>
<antcall target="for-all-configs">
<param value="clean" name="target.to.call"/>
</antcall>
</target>
</project>
I have pasted the content of that file, please do the needs.... -
HT201303 how can reset the security question and answer ?
how can reset the security question and answer ?
Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
"done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
should be asked to verify your security code for the credit /debit card and NOT the
security questions.
d. At this time you can remove the card by going back in to edit the payment info and
selecting "none" as the card type then saving the changes by selecting "done". You
should now be able to use your iTunes store credit without answering the security
questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
How to set the page size and the margins programatically
Hello,
I am working with crystal report XI Release2 and asp.net.
One of my report is having 4 graphs in a single report.In order to display all the graphs in one page i have set the paper size as A3.(Via Crysta report ->File->Page set up)
But the page size A3 is not provided by all printers.So problem comes when the application is diployed on a machine which does not support A3 Printer.All the graphs will not be shown on a single page.
Also Each and Every time ,when the application is diployed on a machine,user has to open the crystal report and adjust the page size accordingly to get all the reports on a single page.
This is a kind of usability issue also.
Is it possible to set the page size and the margins programatically say for eg 11 X 17.so that with out doing anything all the 4 graphs will get displayed on a single page ?
Please let me know if you require more information regarding this issue.
Thanks in advance.
smitha.Hi Ludek,
i could solve the issue by using the follwing code.
report = new ReportDocument();
PageMargins customPageMargin = report.PrintOptions.PageMargins;
report.PrintOptions.PaperOrientation = PaperOrientation.Portrait;
report.PrintOptions.PaperSize = PaperSize.Paper10x14;
customPageMargin.rightMargin = 1;
customPageMargin.topMargin = 0;
customPageMargin.bottomMargin = 0;
report.PrintOptions.ApplyPageMargins(customPageMargin);
Thanks for you help.
Regards,
smitha. -
I have added a large widescreen monitor and now have a two-screen set up. This taxed my old video card, so we replaced that, too. Then I updated Firefox. Now my window automatically maximizes. "Restore" is the same size as "Maximize", and I can resize it if I carefully drag and drop all four corners. But if I click on the top bar to relocate the resized window, it re-maximizes. I can't find any options or settings that allow me to fix the window size, lock a customized window size, etc. IE8 is not doing this, so I don't think it's the monitor or desktop settings.
Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].<br />
<br />
Delete localstore.rdf or rename the file to localstore.rdf.sav in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] to test if the file is corrupted.<br />
See http://kb.mozillazine.org/Corrupt_localstore.rdf<br />
(caution: do not delete the localstore.rdf file in the Firefox program installation folder)<br />
<br />
Note:<br />
Deleting the file [http://kb.mozillazine.org/localstore.rdf localstore.rdf] will reset the customizations of the toolbars to the defaults.<br />
You can rename "localstore.rdf" to "localstore.rdf.sav" to test if that solves it.<br />
Then you can restore the customization by copying "localstore.rdf.sav" to "localstore.rdf" if it didn't work. -
How to change the font size and style on run time
dear all
i try to change the font style and font size on runtime. I did the following:
1- i created an item(:font_size) in which i will write the size of the font for the the other item ('customer_name')
2 on the post_change trigger for 'font_size' i write this code
SET_ITEM_PROPERTY('customer_name',FONT_size,(:font_size);
i write 12 then then font size changed , then i write 18 , the size does not change. and when i write any value , no change happens. I do not know why
the second problem is how to change the font style
i made three checkbooks (bold,italic,underline)
on the trugger when_checkbox_checked i write
IF :BOLD = 'B' THEN
SET_ITEM_PROPERTY('N_SAMPLE',FONT_STYLE,'BOLD');
ELSE
SET_ITEM_PROPERTY('N_SAMPLE',FONT_STYLE,'REGULAR');
END IF;
no change happend at all.
please helpHi friend,
it's a really really strange tip... May be it's a Forms bug? I've tried with set_item_property..and.. you're right, it doesn't work..
So.. you can try making this:
- create a visual attribute with an specific font size....
- use the
SET_ITEM_INSTANCE_PROPERTY('block.item',CURRENT_RECORD,VISUAL_ATTRIBUTE,'you_visual_attribute');
and call it from psot-change....
It works
Hope it helps,
Jose. -
2 Question How to set the page size and full screen
I am looking to find out how to set the page to be 1024 by
768 static and also how to force a browser window to go to full
screen. ThanksHi Ludek,
i could solve the issue by using the follwing code.
report = new ReportDocument();
PageMargins customPageMargin = report.PrintOptions.PageMargins;
report.PrintOptions.PaperOrientation = PaperOrientation.Portrait;
report.PrintOptions.PaperSize = PaperSize.Paper10x14;
customPageMargin.rightMargin = 1;
customPageMargin.topMargin = 0;
customPageMargin.bottomMargin = 0;
report.PrintOptions.ApplyPageMargins(customPageMargin);
Thanks for you help.
Regards,
smitha. -
I like using the Three Button Dialog .vi. However, I am doing a job were I need to use a larger font size. I tried to adjust the core vi but could not make it do what I wanted. Any help would be great.
Jeff Bohrer wrote:
1: VI Properties Window Size- Check maintain proportions of window for different monitor resolutions. (Your users will thank you)
Jeff,
Why do you think that is a good idea? When I opened your VI on my screen, the buttons were cut off at the bottom, and there was a slight cutoff on the right side. Without scrollbars or the ability to resize the panel, (which I generally wouldn't want on a dialog box anyway) there is no way to be able to see the whole dialog.
Did your VI show all of the buttons and show all of the text box? On mine it looked like this.
What was your screen resolution and your monitor aspect ratio? Mine is 1680 x 1050 for a 16:10 ratio. I think you will have problems with checking this box. I would recommend unchecking it. Suppose you programmed on a 16:10 screen, but someone else has a 16:9, or even a 4:3. That is going to screw up the appearance of the dialog unless you take the time to resize the buttons and text inside the dialog. (And I feel checking the resize option inside the Window Appearance settings just never works right either.)
If I was the user, I'd appreciate a dialog box that wasn't cut off.
Attachments:
3ButtonDialog.PNG 6 KB -
How can set the responsiblity name and operatingunit name at header level y
Dear all
Good Morning
i have to set the respname and org name at header level
i taken the item at page level userinfo it is coming the right side of the page i want to be set at header level only in left side top only...
is there any item style for this requiremt
Regards
SreekanthDear Sumit
I designed one custom page in top header level i want to put Operating unit name and responsiblity name i mean in which responsiblity user working in that page...
i want to set these two properties
in process request i wrote the code
int orgid=pagecontext.orgid();
String respname = pageContext.getResponsibilityName();
i want to set these values to icorresponding items
these items i want to create at the top level of the header
which region which style.........
in page level i taken userinfo item it is coming right side of the header
i want to set these two items either left or right i want to set header level only
Regards
Sreekanth -
How do I increase the point size in the dialog boxes and especially on the list of messages on email? I can increase the point size and font of actual messages content but not the LIST of emails in my inbox. They are too small for me to read.
This discussion is for computer built before 2006.
You could use a different mail app. Consider thunderbird.
It can be hard to find with community ( forum ) to post to. Here is an easy and complete list:
https://discussions.apple.com/community
I'll ask the host to move this post to M.
Robert -
How do I change the font size and color in my e-mail?
I'm using the regular MAIL application on my Macbook (OSX 10.5.5) and I'm wondering how to change the font size and color of my incoming and outgoing mail.
Any suggestions?
thanks!I'm using the regular MAIL application on my Macbook (OSX 10.5.5) and I'm wondering how to change the font size and color of my incoming and outgoing mail.
For outgoing email you the Fonts and Colors buttons found in the New Message pane (note that settings you make in Mail > Preferences do not affect outgoing messages). -
How to increase the heap size of the container in whioch BPEL is running ?
Hi All,
I recently raised an SR they have asked me to do the following,
Can you please try and start the container running the BPEL process with max
heap space (-Xmx) of 2 GB and the eden space (-Xmn) at about 60% of 1228m and
the option -XX:+AggressiveHeap set. (even though this option is recommended for
multi processor machines say 4)
can anyone kindly explain me how to increase the Heap size and Eden size of BPEL container ?
Thank YouHi Deepak I cant see any attribute or element in the oc4j_opmn.xml file regarding heap memory. In the server properties I changed the size of heap memeory how can I rollback.
I am getting the following error
Configuration information
Running in C:\product\10.1.3.1\OracleAS_1
Operation mode:Startup, App Server, No Enterprise Manager, Single Instance
Oracle home:C:\product\10.1.3.1\OracleAS_1
Oracle home name:Unnamed
Instance name:SOA.01hw117905.India.TCS.com
Instance type:allProducts
Version:10.1.3.4.0
Uses infrastructure:false
Not an infrastructure instance, no infrastructure information available
Components:[j2ee, apache, orabpel, oraesb, owsm, Wsil]
2009-08-19 09:08:51.863--Begin log output for Mid-tier services (SOA.01hw117905.India.TCS.com)
2009-08-19 09:08:51.863--Processing Step: starting OPMN
2009-08-19 09:09:00.394--Processing Step: starting OPMN managed processes
2009-08-19 09:09:35.19--End log output for Mid-tier services (SOA.01hw117905.India.TCS.com)
An unknown OPMN error has occured
oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:121)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:89)
... 6 more
Exception caused by
Error from opmn during process control operation
oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:89)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
<?xml version='1.0' encoding='WINDOWS-1252'?>
<response>
<msg code="-82" text="Remote request with weak authentication.">
</msg>
<opmn id="01hw117905:6200" http-status="206" http-response="2 of 3 processes started.">
<ias-instance id="SOA.01hw117905.India.TCS.com">
<ias-component id="default_group">
<process-type id="home">
<process-set id="default_group">
<process id="172" pid="2176" status="Alive" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="success">
<msg code="0" text="">
</msg>
</process>
</process-set>
</process-type>
<process-type id="oc4j_soa">
<process-set id="default_group">
<process id="173" pid="5556" status="Stopped" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~oc4j_soa~default_group~1.log" operation="request" result="failure">
<msg code="-21" text="failed to start a managed process after the maximum retry limit">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server">
<process-set id="HTTP_Server">
<process id="171" pid="2724" status="Alive" index="1" log="C:\product\10.1.3.1\OracleAS_1\opmn\logs\\HTTP_Server~1.log" operation="request" result="success">
<msg code="0" text="">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
</ias-instance>
</opmn>
</response> -
How can you use one image and edit it three different ways to export later?
I am a new Lightroom 3 user. How can use the same image and edit it multiple ways to produce mulitple images to later export? For example, I have a picture of a bride and groom. I want to use that image and create a color image, a black and white image, and a close up of their hands.
Do I need to do either of those options before I start editing the image at all? For example, what if I am working on the image and doing some creative edits. Then I think of another option that I could do. Is it too late at that time or can I still get the original image to begin with?
-
Can we change font size and font type in reports
Hi All Technical/Functional Masters,
We are developing some transactional reports in ISU. this report has 20 columns to be printed. On screen, display is not a problem but client has a requirement to download this report in PDF format and wants to print on A4-paper in Landscape. Although we have managed to accommodate all the columns on A4 paper but have to compromise with font size that are very small and not visible. If we download the report in excel format we are able to maintain the font size 8 and accommodate all columns after little format but same in PDF is a problem.
Can anyone tell whether we can increase the font size and change font type(from SAP standard to 'Arial') before sending the output in PDF ? Is there any property or utility that can be changed or used for this purpose.Function Module : CONVERT_ABAPSPOOLJOB_2_PDF
Include : THSTXWFPL
for modify font size
decrease fontsze foncharacter will increase
fontsize = 120. <-- Change
fontsize = 100. or fontsize = 80
Depend on your logon lang. My case logon 'TH' or 2. I modified font ZCORDIA (refer CordiaNEW thai font)
if is_cascading is initial.
case language.
when '0'. "Serbian
font = 'COURCYR'. devtype = 'SAPWIN'.
when '1'. "simpl.Chinese
font = 'CNHEI'. devtype = 'CNSAPWIN'. cjklang = 'X'.
when '2'. "Thai
font = 'THDRAFT'. devtype = 'THPDF'.
font = 'ZCORDIA'. devtype = 'ZMTHSWNU'.
font = 'THANGSAN'. devtype = 'ZPDFUC'.
when '3'. "Korean
font = 'KPSAMMUL'. devtype = 'KPSAPWIN'. cjklang = 'X'.
when '4'. "Romanian
font = 'COURIER'. devtype = 'I2SWIN'.
when '5'. "Slovenian
font = 'COURIER'. devtype = 'I2SWIN'.
when '6'. "Croatian
font = 'COURIER'. devtype = 'I2SWIN'.
when '8'. "Ukranian
font = 'COURCYR'. devtype = 'SAPWIN'.
Add font Cordia Thai
SE73 --> Fon familia --> ZCORDIA
Load Font Cordia thai to system
SE38 --> RSTXPDF2UC
load CORDIA.TTF
SE73 --> printer font --> 'ZMTHSWNU'
Add ZCORDIA font and copy AFM Metric from = 'THDRAFT'. devtype = 'THPDF'.
Modify AFM
example
*----- OLD--
StartFontMetrics 2.0
sapFamily ZCORDIA
sapHeight 000
sapBold false
sapItalic false
StartCharMetrics 0183
WX 0500 ; N space ;
WX 0500 ; N exclam ;
WX 0500 ; N quotedbl ;
WX 0500 ; N numbersign ;
WX 0500 ; N dollar ;
WX 0500 ; N percent ;
WX 0500 ; N ampersand ;
*--NEW--
StartFontMetrics 2.0
sapFamily ZCORDIA
sapHeight 000
sapBold false
sapItalic false
StartCharMetrics 0183
WX 0375 ; N space ;
WX 0375 ; N exclam ;
WX 0375 ; N quotedbl ;
WX 0375 ; N numbersign ;
WX 0375 ; N dollar ;
WX 0375 ; N percent ;
WX 0375 ; N ampersand ;
Result : decrease space between character. Then Your PDF will have BIGGER FONT.
Rdgs,
Suwatchai -
Determining the used and free space on the database
Hi,
I am trying to analyse the total used and free space on all the tablespaces in a database. The query which I am using is as below:
SELECT /* + RULE */ df.tablespace_name "Tablespace",
df.bytes / (1024 * 1024) "Size (MB)",
SUM(fs.bytes) / (1024 * 1024) "Free (MB)",
Nvl(Round(SUM(fs.bytes) * 100 / df.bytes),1) "% Free",
Round((df.bytes - SUM(fs.bytes)) * 100 / df.bytes) "% Used"
FROM dba_free_space fs,
(SELECT tablespace_name,SUM(bytes) bytes
FROM dba_data_files
GROUP BY tablespace_name) df
WHERE fs.tablespace_name (+) = df.tablespace_name
GROUP BY df.tablespace_name,df.bytes
UNION ALL
SELECT /* + RULE */ df.tablespace_name tspace,
fs.bytes / (1024 * 1024),
SUM(df.bytes_free) / (1024 * 1024),
Nvl(Round((SUM(fs.bytes) - df.bytes_used) * 100 / fs.bytes), 1),
Round((SUM(fs.bytes) - df.bytes_free) * 100 / fs.bytes)
FROM dba_temp_files fs,
(SELECT tablespace_name,bytes_free,bytes_used
FROM v$temp_space_header
GROUP BY tablespace_name,bytes_free,bytes_used) df
WHERE fs.tablespace_name (+) = df.tablespace_name
GROUP BY df.tablespace_name,fs.bytes,df.bytes_free,df.bytes_used
ORDER BY 4 DESC;
Is this query alright? Or are any changes required in it?
Thanks in advance.SET LINESIZE 85
SET PAGESIZE 200
column tablespace_name format a18
column file_name format a25
column Allocated_kb format 999,999,999
column free_kb format 999,999,999
column Percent_Free format 999
SELECT
df.tablespace_name,
df.file_name,
df.bytes/1024 Allocated_kb,
free.free_kb,
Round(free.free_kb/(df.bytes/1024)*100) Percent_Free
FROM
dba_data_files df,
(SELECT file_id, SUM(bytes)/1024 free_kb
FROM dba_free_space GROUP BY file_id) free
WHERE
df.file_id=free.file_id
ORDER BY
Percent_Free;
Maybe you are looking for
-
Hp laserjet printer 1300PCL 6/ Hp color laser jet 2605 software installation
please i want to install my window 8 laser jet printers
-
How do I open a QuickTime movie in the Player
How do I create a link in Dreamweaver8 which will open a QuickTime movie in the QuickTime Player and not in another browser window of Safari?
-
Extra bucks deducted from my Credit card even no application purchase made
Hi I am Chetan Lashkari, recently I have bought 2 application from app store. 1st one is FIFA 2013 @ Rs. 55 but after purchasing I have receive a message from my bank saying Rs. 60 has been debited from your card ending with 9204 in iTunes.com at App
-
Currency converted wrongly in billing advise needed
Hi Gurus I am getting the below issue. will really apprecieate your inputs to resolve the issue My company code currency is usd and selling to European customer in EUR currency . Sales order will have pricing as below PR00: 100 EUR 145 usd VPRS:
-
At least once a month I loose all TABS. Is there a method for exporting the tabs? similar to exporting the Bookmarks?