How can we assign the output of script pdf  into input of  function module

Hi Guru's
i have a query  convert script output into pdf then assign this pdf file as a input of one function module.it is possible or not..
if yes how can we do it.
Thanks,
[email protected]

Hi,
Search below thread
https://www.sdn.sap.com/irj/sdn/forumsearch
Regards
Pavan

Similar Messages

  • How can I rearrange the pages in a PDF without changing the assigned paged numbers.

    How can I rearrange the pages in a PDF without changing the assigned paged numbers? These correspond to the original document folio numbers.

    In theory it would be possible to 'record and play back' the page numbers using a folder-level script, but it's far from trivial. You would have to use the doc.movePage() function - presumably driven by a dialog box - to do the page shuffling so there was a way to track what was being done, then swap the page 'labels' of the two affected pages. That's where it gets messy.
    We have functions in the JSAPI which can read and write the page label, but they don't do things in a logical way. The 'getPageLabel()' function simply returns a string, but the 'setPageLabel()' method expects to be told the numbering scheme, prefix, etc. You'd have to parse the string and work out what scheme it was implementing.

  • How can i retrieve the output of procedure using a select statement ?

    Hi every one.
    this mite be dumm ?
    how can i use the output of the a procedure containing multiple rows of data in a select statement ?

    This is not  a SQL Developer question. You should ask it in the SQL and PL/SQL forum.
    The short answer is you can't.  Sounds is if you are trying to use MSSQL techniques in oracle. Learn oracle techniques

  • How can i see the output of a form

    I am having one driver program and form.From these two how can i see the output.

    Hi Sunny
    You might already know; but for the driver program; a smartform is just a function module.
    (In the smartform; this function module name can be found in the menu tab Environment -> Function Module Name.)
    Note: The FM 'SSF_FUNCTION_MODULE_NAME' is obviously the correct way of getting the FM name from the smartform name !!
    So all you need to do is call this function module passing any variable / tables you need to pass to the smartform from your driver program.
    Hope it helps
    Neer

  • How can I extract the full SQL script for a schema?

    Hi,
    How can I extract the full SQL script for a schema?
    I am looking for some method that needs jus SQL*Plus and preferably doesn’t need any extra tool.
    Thank you,
    Alan

    How can I extract the full SQL script for a schema?What are you looking for? PL/SQL code? DDL for objects?

  • How can i assign the Transaction varient to the user in 4.6C version

    How can i assign the Transaction varients n Screen Varients  to the users in 4.6C version.
       Actually Iam using T-code SHD0 for hiding the field in VA11 transaction. In this iam created one transaction varient n one Screen varient.iam not able to activate that screen varient and iwant to assing to perticular users. But i have a option in 4.7 above version my client is using 4.6C version. Please give me the solution as need full.

    Hi,
         Use the PPM toolkit class CL_CRM_PPM_UM_TOOLKIT. You can use the method You can use the method GET_ASSIGNMENTS_OF_USER which returns positions held by an user(user name).  You may also find the method GET_POSITION_OF_USER useful. It accepts username and the organization ID and will return the positions held by the user under that organization.
      This class always uses the current plan (01). If you want otherwise, you can use the FM RH_STRUC_GET. As to how this FM should be used, look inside the above said methods.
    Regards,
    Arun Prakash
    Edited by: Arun Prakash Karuppanan on May 11, 2010 11:40 AM

  • How can I disable the output of the domain name after a getent request?

    I use an iPlanet DS 4.13 to resolve the hostnames to IP-adresses in my company network. I have several scipts in use which use the getent command to resolve name to IP, but if I do a 'getent hosts hostname' I get an output like this:
    123.123.123.123 hostname.domainname
    How can I disable the output of the domainname? I just want to get back the IP-adress and the hostname?!
    Help, please?!

    The enrty in Ur DS for name to ip resolution might
    have been given in the format "hostname.domainname" for the hostname.so if U remove the domainname it would resolve to the host name only.Check the attribute field in Ur directory server where U've entered the hostname.

  • OBN: How can we add the tcode of target system into Source System.?

    Dear Experts,
    I want to add a t-code ME53n of ERP) into a role as OBN target in my SAP TM.
    I tried to add this t-code but could not find this t-code in SAP TM system.
    How can we add the tcode of target system into Source System.?
    I tries to import the role of target system but that does not work.
    Please help!
    Regards,
    Saurabh

    Hi Saurabh,
    Logically there is no need to add a tcode of the target system in the source system.
    If you have right roles in the system then system should allow you to add tcode in the OBN target simply by going to PFCG roles and using add transaction feature.
    To make sure it works properly you have to check the Method & Parameter assignment to the newly added tcode.
    Thanks & Regards,
    Tarun Kumar

  • My macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

    my macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

    That indicates a hardware failure. Read here:
    http://support.apple.com/kb/ts1559
    If nothing works, you most likely have a hardware failure. Make an appointment at an Apple store to confirm.

  • How can we acess the data of one component into othr component in webdynpo?

    How can we acess the data of one component into other component in webdynpro....
    I need an Field input from one webdynpro component(comp1)  which is away from the line of process to the other component(comp2) we need that data........I mean i need the field info of comp1 where we doesn't navigate through the Comp1 in the portal & directly access the  component comp2.........kindly share your ideas.....and possible ways .........
    any doughts do post.....
    thanks in advance!

    Hi,
    Please post your query in forum Web Dynpro ABAP Forum, under Application server.
    You have to define the source component as in the used component in the target one to do that.
    after that you will be able to get data from that component.
    Regards,
    Vaibhav

  • How can we acess the data of one component into othr compnent in webdynpro?

    How can we acess the data of one component into other component in webdynpro....
    I need an Field input from one webdynpro component(comp1) which is away from the line of process to the other component(comp2) we need that data........I mean i need the field info of comp1 where we doesn't navigate through the Comp1 in the portal & directly access the component comp2.........kindly share your ideas.....and possible ways .........
    any doughts do post.....
    thanks in advance!

    Hi Reddy,
    You can do it in multiple ways. One way would be to try transfer the parameters through URL & the other would be to work with the concept of interface nodes. Please try go through these 2 threads ( [Thread 1|Call view of another WDA Component and pass the value to it; & [Thread 2|navigation from one program to another; )where I have explained about working with Interface node in detail. You can refer to this [thread |receving parameters between two standard webdynpro applications;to see as to how you can do the same via parameters in URL.  Hope it would help resolve your problem.
    Regards,
    Uday

  • How can I sort the words in a document into an alphabetical list?

    How can I sort the words in a document into an alphabetical list? Thanks!

    writer888 wrote:
    How can I sort the words in a document into an alphabetical list? Thanks!
    Copy the words to the Mac's clipboard (Edit menu> Copy)
    Paste into TextEdit 
    Next open the Edit > Find > Find window in Text Edit.
    Highlight a space between two words and Edit menu > copy, paste into the Find field
    Next create a return in the middle of your text and copy that and paste into the Replace field
    Click Replace All.
    Now Edit > Select All and Edit > Copy
    Open a Spreadsheet program with Sort ability and paste into the second column cell from the top
    place a "a" into the top column cell, select the entire colum
    Sort desending order
    Now if you need it out of spreadsheet format, then your going to need to copy just the data cells (not the entire column to avoid problems) and Paste "Special" as unformatted text into a word processing program
    If you need to get rid of the Returns, do the opposite you did in Text Edit, replace the Returns with Spaces
    A chore, but it's rare one needs to sort words into alaphabetical order.
    FYI, I used TextEdit and the free LibreOffice (Spreadsheet and Word Processing) for the above effects.

  • How can I change the name of a PDF in the bookcase

    How can I change the name of a PDF in the bookcase

    Hi,
    It is possible to edit the dictionary, but not recommended.
    It is recommended to use exp/imp to "rename" a schema
    HTH
    Laurent

  • How can I  sort the pictures in my gallery into albums?

    How can I sort the photos in my gallery into albums?

    Thank you
    Sandi
    Bark less, wag more - unless you are a Schnauzer

  • How can I change the size of a pdf source file, or, convert it to Word?

    How can I change the size of a pdf source file, or, convert it to Word?

    A lot depends on the form of the PDF. Is it graphics, a scan of a text file, pure text, or other? What version of Acrobat are you working with.
    You can do a save as to get a WORD file, but do not expect great results. The ability to get a decent WORD file depends on what the form of PDF you are working from. If it was created from WORD with tags and all, you might get good results. If not, you might get a lot of messed up results.
    Explain what you are starting with and your ultimate goal. Also check the audit of the file (should be under PDF Optimize) to see where the file information is concentrated (text, fonts, graphics, other).

Maybe you are looking for