How can we handle CLOB in Universe and WebIntelligence
Hi,
Could you explain how can we handle CLOB in Universe and WebIntelligence?If we use CLOB in either of this,how is the Report performance ?Is the perfomance of report degraded? Appreciate your help.
Thanks,
Swapna
Hi,
There is no way around this, long texts are big chunks of data that have to be moved from the database to the webi report.
Depending on how many rows of data you retrieve this can become a problem in various spots.
1) network traffic (lots of data to move over the network).
2) webi report memory (lots of data that needs to be stored in memory to work with the data).
So you need to limit the query in either the number of rows being retrieved,
or in the size of the data that is retrieved per row.
Depending on your use of message text, you can limit long text object to a smaller number of characters.
(Universe, Parameters, Controls...)
Depending on your version of database and BO, the default of this value is 1000 or unrestricted.
It might be that you just need an idea of the message and can limit this to 100 chars or similar, which should help performance.
It is also possible that the text is always 'long' padded with spaces, in this case it can help to trim the message column in the universe already.
Good luck,
Marianne
Similar Messages
-
How can we handle errorrecords in session and calltransaction methods
hi experts
can u help me for thisCheck out this sample program
REPORT ztest_report
NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZRASH.
* Internal Table Declarations *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
KUNNR(10),
BUKRS(4),
KTOKD(4),
ANRED(15),
NAME1(35),
SORTL(10),
STRAS(35),
ORT01(35),
PSTLZ(10),
LAND1(3),
SPRAS(2),
AKONT(10),
END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
KUNNR(10),
EMSG(255),
END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
KUNNR(10),
SMSG(255),
END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
V_TLINES LIKE SY-TABIX,
"For storing total records processed.
V_ELINES LIKE SY-TABIX,
"For storing the no of error records.
V_SLINES LIKE SY-TABIX.
"For storing the no of success records.
* Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
* Start-of-selection *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
* TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
* End of Selection *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*& Form form_uploadff
* Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILE
* FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = IT_FFCUST
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM. " form_uploadff
*& Form Form_bdcgenerate
* Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
PERFORM POPULATEBDC USING :
'X' 'SAPMF02D' '0105',
' ' 'BDC_OKCODE' '/00' ,
' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
'X' 'SAPMF02D' '0110' ,
' ' 'BDC_OKCODE' '/00',
' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
'X' 'SAPMFO2D' '0120',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0125',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0130',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0340',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0360',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0210',
' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0215',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0220',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0230',
' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
MESSAGES INTO IT_CUSTMSG.
IF SY-SUBRC <> 0.
*--Populating the error records internal table.
IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_ERRCUST.
CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
IF V_FLAG1 = ' '.
PERFORM FORM_OPENSESSION.
V_FLAG1 = 'X'.
ENDIF.
*--Inserting the error records into already open session.
IF V_FLAG1 = 'X'.
PERFORM FORM_INSERT.
ENDIF.
*--Populating the Success records internal table.
ELSE.
IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_SUCCUST.
CLEAR IT_SUCCUST.
ENDIF.
*--Displaying the messages.
IF NOT IT_CUSTMSG[] IS INITIAL.
PERFORM FORM_FORMATMSG.
ENDIF.
*--Clearing the message and bdc tables.
CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM. " Form_bdcgenerate
*& Form populatebdc
* FOrm to Populate the BDC table.
FORM POPULATEBDC USING VALUE(P_0178)
VALUE(P_0179)
VALUE(P_0180).
IF P_0178 = 'X'.
IT_CUSTBDC-PROGRAM = P_0179.
IT_CUSTBDC-DYNPRO = P_0180.
IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
IT_CUSTBDC-FNAM = P_0179.
IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM. " populatebdc
*& Form FORM_OPENSESSION
* Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = LV_SESNAM
HOLDDATE = '20040805'
KEEP = 'X'
USER = SY-UNAME
PROG = SY-CPROG
* IMPORTING
* QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
WRITE :/ 'Session not open'.
ENDIF.
ENDFORM. " FORM_OPENSESSION
*& Form FORM_INSERT
* fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FD01'
* POST_LOCAL = NOVBLOCAL
* PRINTING = NOPRINT
* SIMUBATCH = ' '
* CTUPARAMS = ' '
TABLES
DYNPROTAB = IT_CUSTBDC
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM. " FORM_INSERT
*& Form FORM_CLOSESESS
* Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM. " FORM_CLOSESESS
*& Form FORM_FORMATMSG
* Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = SY-LANGU
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = LV_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM. " FORM_FORMATMSG
*& Form form_writeop
* To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
/ 'No of Error Records :',V_ELINES,
/ 'No of Success Records :',V_SLINES,
/ 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM. " form_writeop -
How can I handle the Mass Uploads and Mass Changes?
Hi Experts,
I'm unable to upload mass data from one server to another server through BOL Programming.
So help me out with the coding.
Regards
Munna.Hi Munna,
Please look into the below images where i have changed description. -
how can i handle that i can gibe the domainname with é - any code? or something else?
Could you please confirm the error message you are getting and whether it is while adding domain in File > Export as HTML or File > Upload to FTP host option or if there is a different location you are referring to?
I checked and both the Export and Upload to FTP options both accept the accented characters in domain name field.
Cheers,
Vikas -
How can we handle browser settings while dealing with the security ?
Hi ,
how can we handle browser settings while dealing with the security ?When we configured security in web.xml , during the first request the container is asking for the authentication credentials once they are provided it go's on. but when the user gives a fresh request from the second window within the same browser that time it is not asking for authentication. How can we overcome this.Is there anything to do with server configurations?
How can we make the container no to keep the things or act like session?Ya... I am taking a small example need not happen always but a kind of possibility i am thinking off.
once the user sign out and just left without closing the browser and a friend (suppose not a good friend ... just kidding...) of that user may open the same jsp or file .This time the security is breached. If that feature or property exists....
I know what you might say ... the user will log-out before leaving where a programer might invalidate the session at the time of log out.
Consider the case of a bad Programing or just a programer might forget to invalidate,At that time as a application administrator how can he solve that issue.
Thanks.......
Edited by: user8483670 on Jun 6, 2011 1:08 AM
Edited by: user8483670 on Jun 6, 2011 1:09 AM -
How can we handle Exception Branch in BPM effectively
Hi,
I want to capture errors occurred in PM during runtime by using special "Exception Branch".
For example If i define exception branch for one black then any step within that block thrown error then automatically it calls that corresponding exception branch within that block. Now i want to identify which step within that block has thrown error and what is the error.How can i achieve this?
Thanks and Regards,
SudhakaraHi Sudhakara,
Generally we use control step to raise an exception, Please go through this link for better understanding:
http://help.sap.com/saphelp_nw04/helpdata/en/bb/e1283f2bbad036e10000000a114084/content.htm
Also,
Exception Handling:
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
I hope it helps,
Thanks & Regards,
Varun Joshi -
How can you handle Third Party Payment in Oracle Payroll
People I hope you all are at your Good Health!
I have a question and that is i would like to know how i can restrict a dependent from getting an Insurance benefit after he has crossed the Age =18 Also the To date must be calculated and populated automatically.
Also, how can we handle this third party payment in the Oracle Payroll.
All comments are welcomed.
ChetanFor the payment piece, create a payment method on the person record as a third party. you would need to have setup the recieving party as a third party organization before setting up at employee level.
During normal payroll processing, you may run Third party check writer to generate a check .
Ankur thank you for the response i have understood that we must create a Payment Method and Check the Check box for Third party Payment on Payment Method window.But how will that be handled for case where an employee has taken a Loan from a Bank and he has to be deducted every month from his salary how can we handle such a requiremet.
I did not understand when you said :
"you would need to have setup the recieving party as a third party organization before setting up at employee level.
During normal payroll processing, you may run Third party check writer to generate a check ."
Could you please explain me.
Regards,
Chetan -
How can I have both genius playlists and regular playlists available on my new 160g classic ipod. I can see my entire song list, but no playlist other than the 3 genius playlist I just made. Also how can I delete a genius playlist. Made the same playlist twice by mistake. Thanks.
This was not a simple task. Got it handled. Had to call Apple support. Apparently, the 160g only syncs the genius playlist. You have to go in and "tell it" to sync the entire playlist as well as the genius playlists. There is also an option for only syscing certain songs. On itunes, there is two sections; one for the stuff that is synced on your ipod and another separate list for the stuff in your library! This is exciting for me as I am not computer savvy to say the least.
-
How can we handle multiple applications in session method
how can we handle multiple applications in .. session method.
can any body reply me.
thanksHari,
hi Check out this sample code to use session method
REPORT ztest_report
NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZRASH.
Internal Table Declarations *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
KUNNR(10),
BUKRS(4),
KTOKD(4),
ANRED(15),
NAME1(35),
SORTL(10),
STRAS(35),
ORT01(35),
PSTLZ(10),
LAND1(3),
SPRAS(2),
AKONT(10),
END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
KUNNR(10),
EMSG(255),
END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
KUNNR(10),
SMSG(255),
END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
V_TLINES LIKE SY-TABIX,
"For storing total records processed.
V_ELINES LIKE SY-TABIX,
"For storing the no of error records.
V_SLINES LIKE SY-TABIX.
"For storing the no of success records.
Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
Start-of-selection *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
End of Selection *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*& Form form_uploadff
Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FILE
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = IT_FFCUST
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM. " form_uploadff
*& Form Form_bdcgenerate
Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
PERFORM POPULATEBDC USING :
'X' 'SAPMF02D' '0105',
' ' 'BDC_OKCODE' '/00' ,
' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
'X' 'SAPMF02D' '0110' ,
' ' 'BDC_OKCODE' '/00',
' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
'X' 'SAPMFO2D' '0120',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0125',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0130',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0340',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0360',
' ' 'BDC_OKCODE' '=ENTR',
'X' 'SAPMF02D' '0210',
' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0215',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0220',
' ' 'BDC_OKCODE' '/00',
'X' 'SAPMF02D' '0230',
' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
MESSAGES INTO IT_CUSTMSG.
IF SY-SUBRC <> 0.
*--Populating the error records internal table.
IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_ERRCUST.
CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
IF V_FLAG1 = ' '.
PERFORM FORM_OPENSESSION.
V_FLAG1 = 'X'.
ENDIF.
*--Inserting the error records into already open session.
IF V_FLAG1 = 'X'.
PERFORM FORM_INSERT.
ENDIF.
*--Populating the Success records internal table.
ELSE.
IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
APPEND IT_SUCCUST.
CLEAR IT_SUCCUST.
ENDIF.
*--Displaying the messages.
IF NOT IT_CUSTMSG[] IS INITIAL.
PERFORM FORM_FORMATMSG.
ENDIF.
*--Clearing the message and bdc tables.
CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM. " Form_bdcgenerate
*& Form populatebdc
FOrm to Populate the BDC table.
FORM POPULATEBDC USING VALUE(P_0178)
VALUE(P_0179)
VALUE(P_0180).
IF P_0178 = 'X'.
IT_CUSTBDC-PROGRAM = P_0179.
IT_CUSTBDC-DYNPRO = P_0180.
IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
IT_CUSTBDC-FNAM = P_0179.
IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM. " populatebdc
*& Form FORM_OPENSESSION
Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = LV_SESNAM
HOLDDATE = '20040805'
KEEP = 'X'
USER = SY-UNAME
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
WRITE :/ 'Session not open'.
ENDIF.
ENDFORM. " FORM_OPENSESSION
*& Form FORM_INSERT
fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FD01'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
DYNPROTAB = IT_CUSTBDC
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM. " FORM_INSERT
*& Form FORM_CLOSESESS
Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM. " FORM_CLOSESESS
*& Form FORM_FORMATMSG
Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = SY-MSGID
LANG = SY-LANGU
NO = SY-MSGNO
V1 = SY-MSGV1
V2 = SY-MSGV2
V3 = SY-MSGV3
V4 = SY-MSGV4
IMPORTING
MSG = LV_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM. " FORM_FORMATMSG
*& Form form_writeop
To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
/ 'No of Error Records :',V_ELINES,
/ 'No of Success Records :',V_SLINES,
/ 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM. " form_writeop
Don't forget to reward if useful.. -
How can I handle runtime errors in Java
Please some one tell me what are runtime errors and How can I handle them using java code
This is important
Thanks in Advance
Chowdary AKThe java equivalent of function pointers is the one-instance class, as used to pass handlers to swing components, for example. Often an anonymous class is used.
Put your function signature in an interface, and pass an object that implements that interface:
public Class1 {
public interface CallBack {
void myMethod(String arg1);
CallBack callb;
public Class1(CallBack callb) {
this.callb = callb;
callb.myMethod("A string");
class2 {
first = new Class1(new Class1.CallBack() {
public void myMethod(String arg1) {
... do something ... -
How can I handle exception? - to give user more friendly notification
Hi!
User gets an error:
'Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum =...'
How can I handle this exception (when two users want to modify the same set of data at the same time)? I would like to hide the above error message and give user more friendly notification.
Thanks in advance,
TomThanks Vikas for your answer.
These workarounds are really creative and I want to use one of them. BUT my problem is to 'catch' the exception/error when two users want to modify the same set of data at the same time.
Those solutions which we can read about in this link you gave me describe handling exceptions in pl/sql processes. How can I catch the error I am talking about in pl/sql code?
Code would be like this:
DECLARE
two_users EXCEPTION;
BEGIN
IF --catch the error
THEN RAISE two_users;
END IF;
EXCEPTION WHEN two_users
THEN :HIDDEN_ITEM := 'Error Message';
END;
What should I put in a place where there is '--catch the error' ??
Thanks in advance,
Tom -
Hi friends,
When a work item is created. The User hasn't Approved / Rejected (hasnt taken any Action on that workflow) for 2 days, 4 days and 6 days an Escalation mail has to sent to respective concerend persons.
How can we handle this. The holidays are only Saturday and Sunday.
Client doesnt want to consider the factory calender.
Please suggest me step by step
Thanks in Advance
GaneshYou need to make use of "Modelled Deadline Monitoring" to achieve ur requirement.
Trust me... Search this forum and you will find answer how to make use of different steps to achieve it....
Regards,
PR. -
In call transaction how can we handle error records.
hai..tellme how can we handle error records in call transaction..we can get error records into one flatfile ok...then we have to execute the same bdc program with dat flat file (error records) once again...is it wright ..
Hi,
check this program u will get idea
seee this prog. its will help u .
copy and run this prog.
TYPES : BEGIN OF t_disp ,
vendorno(9),
compcc(13),
purchorg(14),
accgroup(15),
title(7),
name(5),
country(8),
ordcurr(14),
END OF t_disp.
TYPES : BEGIN OF t_err,
msgtyp LIKE bdcmsgcoll-msgtyp,
l_mstring(250),
END OF t_err.
DATA: i_disp TYPE STANDARD TABLE OF t_disp,
wa_disp TYPE t_disp,
i_err TYPE STANDARD TABLE OF t_err,
wa_err TYPE t_err.
data definition
Batchinputdata of single transaction
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
error session opened (' ' or 'X')
DATA: e_group_opened.
message texts
TABLES: t100.
PARAMETER : p_file1 LIKE ibipparms-path,
p_cmode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
*selction screen.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file1.
AT SELECTION-SCREEN ON p_file1.
IF p_file1 IS INITIAL.
MESSAGE 'FILE IS NOT FOUND' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
PERFORM f_disp_file1.
END-OF-SELECTION.
PERFORM f_disp_errs.
*& Form F_DISP_FILE1
text
--> p1 text
<-- p2 text
FORM f_disp_file1 .
DATA: l_filename1 TYPE string.
MOVE p_file1 TO l_filename1.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_filename1
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = i_disp
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*? prepare BDC data
DELETE i_disp INDEX 1.
LOOP AT i_disp INTO wa_disp .
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
wa_disp-vendorno.
'ztest_1'.
PERFORM bdc_field USING 'RF02K-BUKRS'
wa_disp-compcc.
'0001'.
PERFORM bdc_field USING 'RF02K-EKORG'
wa_disp-purchorg.
'0001'.
PERFORM bdc_field USING 'RF02K-KTOKK'
wa_disp-accgroup.
'0001'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFA1-ANRED'
wa_disp-title.
'Mr.'.
PERFORM bdc_field USING 'LFA1-NAME1'
wa_disp-name.
'test name'.
PERFORM bdc_field USING 'LFA1-SORTL'
'TEST NAME'.
PERFORM bdc_field USING 'LFA1-LAND1'
wa_disp-country.
'in'.
PERFORM bdc_field USING 'LFA1-SPRAS'
'en'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-AKONT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=UPDA'.
PERFORM bdc_field USING 'LFM1-WAERS'
wa_disp-ordcurr.
'inr'.
PERFORM bdc_transaction USING 'XK01'.
WRITE:/ WA_DISP-VendorNo,
WA_DISP-COMPCC,
WA_DISP-PURCHORG,
WA_DISP-ACCGROUP,
WA_DISP-title,
WA_DISP-name,
WA_DISP-country,
WA_DISP-ORDCURR.
CLEAR: wa_disp.
REFRESH bdcdata.
ENDLOOP.
ENDFORM. " F_DISP_FILE1
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
IF FVAL NODATA.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
ENDFORM. "BDC_FIELD
*& Form bdc_transaction
text
-->P_0322 text
FORM bdc_transaction USING tcode.
DATA: l_mstring(480),
l_subrc LIKE sy-subrc.
REFRESH messtab.
CALL TRANSACTION tcode USING bdcdata
MODE p_cmode
UPDATE 'L'
MESSAGES INTO messtab.
l_subrc = sy-subrc.
IF SMALLLOG 'X'.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
LOOP AT messtab.
SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
AND arbgb = messtab-msgid
AND msgnr = messtab-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
WRITE: / messtab-msgtyp, l_mstring(250).
*? Send this errors to err internal table
wa_err-msgtyp = messtab-msgtyp.
wa_err-l_mstring = l_mstring.
APPEND wa_err TO i_err.
ELSE.
WRITE: / messtab.
ENDIF.
CLEAR: messtab, wa_err.
ENDLOOP.
SKIP.
ENDIF.
ENDFORM. " bdc_transaction
*& Form f_disp_errs
text
--> p1 text
<-- p2 text
FORM f_disp_errs .
SORT i_err BY msgtyp.
LOOP AT i_err INTO wa_err.
AT FIRST.
WRITE : / text-002.
ULINE.
ENDAT.
AT NEW msgtyp.
IF wa_err-msgtyp = 'S'.
WRITE : / text-003.
ULINE.
ELSEIF wa_err-msgtyp = 'E'.
WRITE : / text-001.
ULINE.
ENDIF.
ENDAT.
WRITE : / wa_err-msgtyp, wa_err-l_mstring.
CLEAR wa_err.
ENDLOOP.
ENDFORM. " f_disp_errs
Regards -
How can we handle dateformat from diff countries into india in bdc with out
hi
experts can u help me pz
how can we handle dateformat from diff countries into india in bdc with out chnaging system parameters while uploading.
i.e flatfile date is germanformat
target date is indianformat.
thanks and regords.use WRITE statement to format date.. along with extension ...
DD/MM/YY
or
DD/MM/YYYY -
How can we handle in flex application if the server is down?
how can we handle in flex application if the server is down?
You and me both.
As ambiguous as the original question was, I think he was just asking how to handle a server exception and I would suggest generally just using a Alert.show("your specific message (eg. The server is currently unavailable)") in the place where you handle the fault return from your service or http call. I'm sure there are more complicated messaging frameworks or approaches, but that seems to be enough for my apps.
Maybe you are looking for
-
Thought I'd post this in case anyone else is running into the same issue... My iPad kept showing that there were lots of Apps to update (72 in my case!). I used the Update All in the App Store, but my iPad never finished updating despite waiting hou
-
My shockwave files play fine in dreamweaver when I test them in the browsers but once I uploaded them they are not showing up I have no idea what I am doing wrong. My site just went live and looks horrible without the swf files it is: www.dmaexpressi
-
AX connection issues with two users online
I recently bought an airport express, hoping to live a blissfull wireless life... I have both a mac book pro and an acer laptop pc to connect, which works fine except that when my mac is online the web speed on the pc is reduced heavily (1/5 of the m
-
Does anyone else notice that scrolling vertically in iTunes on your iPhone 4 (Model MC922LL running version 6.0.1) is really...sticky? Or clunky? It never used to this, that I remember. My 3GS didn't do this, either. Thanks!
-
Unable to create extension for latest Adobe Flash 14.2
Hi. I tried to create own extension for my needs for latest Adobe Flash CC 14.2 with extension builder 3, but after exporting test extension I got error, that max installed version is 14.0 I'm a bit confused how can I create extension for latest Adob