How can we monitor the audio after the cleanup process before we actually record the trans
I have the Sound Blaster Audigy 2 ZS board and I am using it to transfer vinyl records to make CDs. Before my upgrading of Creative Media Source 2 to Creative Media Source 5, I was able to monitor the audio after the cleanup prior to the transfering process. Now I can only monitor the sound at the line input point and not after the cleanup process. Is there any way that we can do that?Vinylrecord
Assuming you mean Actions when you say "Batches", use this menu...
1. Click on the name of the actions set you wish to save.
2. Click the fly-out menu icon at the upper-right corner.
3. Save Actions, put them someplace on your hard drive other than in the Photoshop installation area.
-Noel
Similar Messages
-
How can I get one audio file to stop once another is triggered on the same page in EPUB?
I have multiple audio files on one page and am able to trigger each separately with their own control panels. Unfortunately, these can all be played over one another. Is there a solution within InDesign to stop the first active audio file once another audio button is triggered on the same page?
WIll this have to be done through Javascript?Use buttons. They can have have more than one action. Set a button to stop the first audio, and start the second.
-
I have an iPod nano, 16 GB, 6th generation. Any help with this problem would be much appreciated!
It sounds like your headphones are plugged in all the way. Make sure that the you cannot see any silver from the headphone's plug still showing. You should hear a sort of clicking/popping sound indicating that your headphones have been fully seated.
If that isn't the case, check the headphone jack for debris or damage.
B-rock -
How can I get a full song to play completely before it stops in the first 20 seconds?
Has this happen to anybody else?
That's a shame. It takes some tweaking, but PowerPoint can do this. I know it's not something that is needed all the time, but it's something I've needed on a few occasions. I wonder how well the timing would work out if I broke the video up into sub clips and simply assigned a clip to each slide? It's a lot more work and I suspect I'll pick up some clips and pops during the slide changes.
Keynote is still far better at what it does than PowerPoint, but do I ever wish it could do this so I could really show it off to people.
Thanks for the reply! -
The new itunes is slow and I can not see my musics anymore. How can I have my musics listed like they were before?
I have the same problem with new 11.0. Presentation of album data now seems scrambled in 'Album' screen. Instead of albums in alphabetical order with all album tracks I now get albums in the order of the Album Artist. Unless the album artist is EXACTLY the same, the tracks on any one album can be spread all over the screen (hopeless for compilations). Does anbody know how to get the Album screen to sort solely on the Album title?
-
How can I eliminate random audio interruptions?
How can I eliminate random audio interruptions?
I asked because you posted in the Accessibility -> Hearing community area. You might want to try the community area dedicated to your hardware (desktop, notebook, etc.). See https://discussions.apple.com/welcome
-
How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?
How exactly are you doing this?
When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file. Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
You should see this prompt, when you are joining the regions: -
How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.
It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?
-
I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.
Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.
-
how can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........
Tom Wolsky wrote:
The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
I'll try to replicate your gotcha - but no, that doesn't sound like fun at all! -
My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?
Just an email address
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime -
I recorded an interview on my iPad using the iTalk app. How can I transfer that audio to my MacBook Pro? The file is too big to email.
Use DropBox. https://www.dropbox.com/help/84/en
Cheers, Tom -
Am doing an audio timeline in GB. Need to insert a corrected section of track. When I try the insert, it knocks out the top part of the adjacent track bridge/element. How can I insert cleanly in a timeline? Is it possible to "recover" the good track that was "stepped on?"
Undo what?
Insert in a new track?
I don't think so. I've started an audio book and I'm doing chapter long segments (assuming I can make simple corrections, such as ones made in iMovie and numerous other video editing programs. Routine edits in GB are simple and intuitive. I cannot wrap my mind around the fact that I'm prevented from doing a simple drag and drop, import or paste a two-sentence audio clip. Nor can I find any reference to straightforward audio elements.
Any suggestions you might have would be appreciated. -
How can I create an audio CD from the audio only portion of my iMovie?
Hello, I brought in about 50 min of Digital video into iMovie, I separated (split) the audio from the video, I unlocked the audio, I deleted the video, and now I want to just create an audio CD from the audio that is left.
Can I do this? and if yes how? If I can not, how can I create an Audio CD from on my G5 off a tape on my digital camcorder?
Any help would be apprecaited.This is how:
Go to:
'File'
'Share'
'Quicktime'
'Expert Settings'
'Audio as AIFF' or pick your brand of compression.
Drag and drop the resulting file into iTunes.
Enjoy!
P.S. - You didn't need to delete the video but I think that'll be okay. -
How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.
The following example was one of dozens that showed up on a simple Google search of.....
monitor Internet data use on a Mac
Watch your Internet usage with NetUse Monitor | Macworld
Most service providers have an application for their users as well.
Maybe you are looking for
-
Hi all, I have the requirement of getting same file name with timestamp on the receiver side (EX.Filename_timestamp) by modifying the Adapterspecific messageattributes refering the following blog Re: Regarding Target File name and wrote the code as s
-
Another iMac owner whose logic board failed due to bad capacitors after 4 1/2 years. My question is whether those of you who have had theirs repaired (either under warranty or not) have found the problem resolved, or have you had a reoccurrence? I ne
-
I have used the green screen effect in i'movie 11 - but when I play the clip the background appears a split second before the actual footage does... How can I fix this so it doesn't look like the subject appears out of thin air?
-
File Write error in application server
Hi All, I am getting an error for writing data to a file in application server. Is there any way or transaction where in I can check Read or write access to a file? Please help. Thanks in advance Sanu
-
Can anyone help!!! I tired calling the apple store but no one is in service!!!!