How can we now the tables for a transcation code

dear experts
in 4.6c we can fiend out the tables for trasaction code by using TC:SE49.
in 4.7 and ECC6 how can we fiend out the tables,which are used for a transaction code?

Hi,
TO Find table used in a particular Transaction.
Goto Txn ST05
1. Activate trace wih filter options
2. Run the transaction for which u want to knw the tables in a different session
3. Click on every tab in that transaction.
4. Again comeback to ST05
5. deactive Trace.
6. Display Trace
Now you can the tables used in a particular transaction
Thanks & REgards

Similar Messages

How can i change the phonenumber for my security code in keychain on ios 7.03

how can i change the phonenumber for my security code in keychain on ios 7.03?

i have changed the phonenumber under icloud preferences keychain. after the update on ios 7.03 there is no sms arriving for the security code because there is a double international code in the telephone number like +49 +49. How can i fix this?

How can we do the validation for non visible records in table control.

Hi Experts,
I have a table control which displays list of material details. I have a button to upload the material details from excel file to table control directly. I have to validate all the customers which are exist in the table. But my item (Material) table control displays only 5 rows i.e only 5 entries are visible in module pool screen. The validation is done for 5 records only in PAI event, but i need to do validation for rest of the records too (Which are not visible on items table), if validation fails then needs to display error message.
How can we do the validation for non visible records in table control.
Regards,
Bujji

Hi,
try validating material before displaying it in table control...'
Rgds/Abhhi

How can i write the trigger for Global Temporary Table

Hi Grus,
How can i write the trigger for Global Temporary Table.
I was created the GTT with trigger using the below script .
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
trigger was create successfully, but the wouldn't insert into to EMPNAME Table..
Please guide whether am correct or not? if not kindly give a correct syntax with example
Thanks in Advance,
Arun M M

BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
you are referencing old value in insert stmt.
BEGIN
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
END;then run ur application it works fine...
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
dbms_output.put_line(:OLD.EMP_C_NAME||'yahoo');
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
dbms_output.put_line(:OLD.EMP_C_NAME);
END;
create table EMPNAME as select * from GLOBAL_TEMP where 1=2
insert into GLOBAL_TEMP values('fgfdgd');
commit;
select * from GLOBAL_TEMP;
select * from EMPNAME;
output:
1 rows inserted
commit succeeded.
EMP_C_NAME
fgfdgd
1 rows selected
EMP_C_NAME
fgfdgd
1 rows selectedgot it Arun
Edited by: OraclePLSQL on Dec 28, 2010 6:07 PM

How can I find the table of

How can I find the table of the structure fields?
A structures table?
for example the table of sap standard structure diaprd or diadrp, I do not remember now?
Thanks.

The hard way....
Go to SE11
Enter the structure
Position the cursor on the field
Press Where-Used List
Check all related table to see which one fulfill your needs
Greetings,
Blag.

HT3354 how can i use one table for reference to another

how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
Here is an example of something you can do with two tables:
The table on the right is title "Data" and stores a list of names with age and favorite color.
The table on the left uses the value in the first column to lookup up information in the table Data
in the table on the left:
B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
I know this look complicated. so I'll break it up into smalled pieces:
first the "&" is called the concatenate operator and joins two strings. like this:
a string is a set of characters between double quotes.
so "string 1" & "string 2" becomes "string 1string2" or "Sam " & "Jones" becomes "Sam Jones"
you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
so if cell A1 contains "Hi " and the cell A2 contains "There" then A1 & A2 will result in "Hi There"
so you could add the formula
A3=A1 & A2
this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
OK. So the formula I provided concatenates several items together:
it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data". If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
You will find the Numbers users guide and function reference helpful. You can download then from Apple here:
http://support.apple.com/manuals/#productivitysoftware

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

How can I change the password for the USER in SAP.

How can I change the password for the USER in SAP?
also I want to change the Language and date Format b/c it's displaying in German language..

Hi,
Assuming that User has already his/her user-id and password, and now he/ she wants to change it.
select the client and provide Log-in credentials. Now, instead of 'ENTER' there is one Tab: 'New Password' (up, left hand). Click it.
Now, system will ask for new password to change.
If you are asking from Basis point of view, then T.code: SU01 - User Maintenance.
Enter User's id and Click Change icon.
It will lead to Page: Maintain User.
Here, Select tab: Logon Data
There is a Sub-Tab: Password.
Here, key-in change password and SAVE.
For Language and Date format, contact your Basis-Personnel.
Best regards,
Amit

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

How can i now the number of rows afected by the last query?

how can i now the number of rows afected by the last query?
For example:
i made this update :
update trl_trial set status = 1 /* Validation */
where trial_id = cobject_id
and status = 0; /* Initial */
if NUMBERS_OF_ROWS = 0 then
end if;
how can i do this?
thank u!!!!

how can i now the number of rows afected by the last query?
For example:
i made this update :
update trl_trial set status = 1 /* Validation */
where trial_id = cobject_id
and status = 0; /* Initial */
if NUMBERS_OF_ROWS = 0 then
end if;
how can i do this?
thank u!!!! Do the following :
update trl_trial set status = 1 /* Validation */
where trial_id = cobject_id
and status = 0; /* Initial */
if(SQL%ROWCOUNT = 0 ) then
else
end if;
you can also declare a variable and do
myvar := SQL%ROWCOUNT;
SQL%ROWCOUNT returna the # of rows afected by any sql
statement, like DELETE, UPDATE

How can I contact the administration for cancelling an invoice?

Hi everyone, first of all sorry for my english.
I just bought AbodeExportPDF but I made a mistake: I clicked twice on the button "buy now", I rightly received two invoices. How can I contact the administration for cancelling one of the invoices?
Thank you very much!
Bye
Carol
Ciao a tutti,
ho cliccato erroneamente due volte sul bottone "compra ora", ho giustamente ricevuto due fatture. come faccio a contattare l'amministrazione per annullare una delle due fatture?
Grazie,
ciao
Carol

Hi Carol,
I wish I could speak Italian as well as you speak english, so no apologies!
To cancel one of those subscriptions, please contact Adobe Customer Support: Contact Customer Care. A quick chat session should get you taken care of.
Best,
Sara

How can I get the invoice for the suscription

How can i get the invoice for the PDF exporter suscription, I need it, thank you

Hi Aurelie,
Firstly, you might need to sign in at "adobe.com" using your Adobe ID credentials.
After you are signed in, click on your name in the navigation bar and then click 'Manage Account'.
Under 'Plan & Products section', choose 'Manage Plan'.
All your plan details, payments, billing history are listed on this page.
To print the invoice, click on 'Print' button next to the invoice. A PDF copy of the invoice will be displayed in the next tab and this is it.
Now check and let me know if you need further assistance.
Regards,
Anubha

T61p Battery Problem - how can i get the warranty for my baterry?

- My brother bought a lenovo t61p in US and it is a my present but i live in Vietnam.
( Order date and time: 2CQTTE 04/30/08 19:15:30
Customer Number: 4290001
Order Number: 2CQTTE
Ship-To:
KIEN TRAN
321 74TH WAY N. )
- I have a problem with lenovo t61p baterry now, i just can use t61p in baterry mode < 1 hour.
( manufacture name: SONY
manufacture date: 2008-04-15
first used date: 2008-05
serial number: 4125
bar-Code number: 1ZET184F40X
fru-part number: 42T4566
cycle count: 47
- It is still under warranty. But can i get the warranty for battery in Vietnam? because Lenovo have a branch in Vietnam (http://www.lenovo.com/vn/en/) and the warranty center in Vietnam is in FPT company (big vietnamese company).
- Please show me how can i get the warranty for baterry in Vietnam?
Thanks
Message Edited by dracubi on 03-01-2009 01:18 PM

Well I assume that if the laptop is under warranty you should be able to get service for it. You can check the warranty status at http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=LOOK-WARNTY#sw That should tell you what the terms of your warranty are. If it is an international warranty you can get service at your local lenovo distributor. My t61 for example has a 3 year warranty that is valid in Turkey,. But also I have 1 year international, 2 years pan-Europeand and 3 year Turkish warranty. That was one ofthe stipulations in the contract when our thinkpads were purchased....

How can i extend the table control while transfering the data

hi
how can i extend the table control while transfering the data.

Hi,
For table control we have to handle the page down (P+, or what ever function codes are assigned to that activity) activity with our coding.
Just check out this code:
This is the bdc to update the XK01 transaction code (Vendor Creation).
Here we will use table controls for bankings. Here Iam sending the coding and text files.
Coding
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'. " Page down activity
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
**Flat files for the above code***
Intial screen data file.
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
Table control Data:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards,
Kumar.

How can i know the table fragments

Hi
How can i know the table is fragmented.
Thank you

If you're in 10g you could try use the Segment Advisor to identify various issues etc with your table. This will also provide recommendations on how to improve things.
(below script shamelessly stolen from the brilliant Oracle Base website)
-- segment_adv_table.sql
-- Use Segment Advisor to analyse a table.
-- Original Version
-- http://www.oracle-base.com/articles/10g/SpaceObjectTransactionManagement10g.php
-- owner is SCOTT
-- table is EMP
-- do a search/replace to change these 2 values and re-run it ;)
DECLARE
l_object_id NUMBER;
BEGIN
-- Create a segment advisor task for the SCOTT.EMP table.
DBMS_ADVISOR.create_task (
advisor_name => 'Segment Advisor',
task_name => 'EMP_SEGMENT_ADVISOR',
task_desc => 'Segment Advisor For EMP');
DBMS_ADVISOR.create_object (
task_name => 'EMP_SEGMENT_ADVISOR',
object_type => 'TABLE',
attr1 => 'SCOTT',
attr2 => 'EMP',
attr3 => NULL,
attr4 => 'null',
attr5 => NULL,
object_id => l_object_id);
DBMS_ADVISOR.set_task_parameter (
task_name => 'EMP_SEGMENT_ADVISOR',
parameter => 'RECOMMEND_ALL',
value => 'TRUE');
DBMS_ADVISOR.execute_task(task_name => 'EMP_SEGMENT_ADVISOR');
END;
-- Display the findings.
SET LINESIZE 250
COLUMN task_name FORMAT A20
COLUMN object_type FORMAT A20
COLUMN schema FORMAT A20
COLUMN object_name FORMAT A30
COLUMN object_name FORMAT A30
COLUMN message FORMAT A40
COLUMN more_info FORMAT A40
SELECT f.task_name,
f.impact,
o.type AS object_type,
o.attr1 AS schema,
o.attr2 AS object_name,
f.message,
f.more_info
FROM dba_advisor_findings f
JOIN dba_advisor_objects o ON f.object_id = o.object_id AND f.task_name = o.task_name
WHERE f.task_name IN ('EMP_SEGMENT_ADVISOR', 'USERS_SEGMENT_ADVISOR')
ORDER BY f.task_name, f.impact DESC;

How can we now the tables for a transcation code

Similar Messages

Maybe you are looking for