How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

Similar Messages

HT1529 how can I open the outbox for mail? That is, mail that i have finished and pressed 'send' but has not appeared in the 'sent' folder

how can I open the outbox for mail? That is, mail that i have finished and pressed 'send' but has not appeared in the 'sent' folder

The reason it will not be in the sent folder is, it failed to send.
If it failed to send, then you will see the Outbox icon. 'Pending' would be a more descriptive name.
When it eventually sends, the Outbox will not show in the Mail app interface.
Until it is sent it will stay stuck in the Outbox.
If it refuses to send, you can manually delete it in Finder, at the location ~/Library/Mail/Mailboxes/Outbox.mbox
Close Mail first, before you search for that email using the Finder.
Mail version 4.6. Mac OS version 10.6.8

How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How can I specify the attribute AU_SIZE in OUI

Hello,
How can I specify the AU_SIZE when i create the disk group for OCR and Voting disk when i install the GI home.
Basically i want to create the Disk group with AU_SIZE as 4MB when i create it Via OUI.I know I can edit the attributes when i do using ASMCA.But not sure about OUI.
Please can someone guide me ?
Regards
Joe

Hi Joe,
Did you mean that i will need to move the OCR/voting **** to another diskgroup -> drop the one created during installtion -> recrerate the diskgroup with AU_SIZE as desired Yes.. you must move OCR, VOTING and ASM SPFILE to another diskgroup and recreate the diskgroup.
Doc said : Oracle recommends that the allocation unit (AU) size for a disk group be set to 4 megabytes (MB).
I do not see benefits to configure the AU SIZE 4MBytes for diskgroup that will store only Clusterware Files.
The voting files are stored directly on ASM Disk (i.e not use AU SIZE). The OCR File and ASM SPFILE use AU SIZE, but are not frequently accessed (low I/O) and files are too small to configure AU to 4MBytes.
Set AU SIZE makes a difference when you do need high I/O throughput. i.e: Used to Diskgroup that will store Datafiles.
I recommend you read my point of view how to store VOTING Files, OCR and ASM SPFILE on ASM.
Re: 3rd voting disk on nfs share
Regards,
Levi Pereira

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

How can we do the validation for non visible records in table control.

Hi Experts,
I have a table control which displays list of material details. I have a button to upload the material details from excel file to table control directly. I have to validate all the customers which are exist in the table. But my item (Material) table control displays only 5 rows i.e only 5 entries are visible in module pool screen. The validation is done for 5 records only in PAI event, but i need to do validation for rest of the records too (Which are not visible on items table), if validation fails then needs to display error message.
How can we do the validation for non visible records in table control.
Regards,
Bujji

Hi,
try validating material before displaying it in table control...'
Rgds/Abhhi

How can I change the font in notes in the view in mail?

How can I change the font in notes in the view in mail?

Use the Fonts menu. Either -
• go to the Format menu and select Show Fonts
• or, in the Note creation window, click the icon for Fonts -
In either case, once the Fonts window is open, select the text you want to change then choose the font characteristics (face, style, and size) from the Fonts screen.

How can I decouple the pagination for a global region?

I was having a delightful time using a common region defined on a global page when I determined that pagination setting was begin carried from one page to the next. Arghhhh! So for example, if I have paged to the second set (page) of rows (11-20) on Page 1 and then I go to Page 2, the second set (page) of rows (11-20) is displayed there. If I go to a page which only has a first set of rows (1-10), I get the pagination error "Invalid set of rows requested, the source data of the report has been modified. Reset Pagination". And when I click to reset, it just repeats the error. [I suppose it tries to display the second set or rows (11-20) again -- which doesn't exist. What's that saying about insanity?]
How can I decouple the pagination for a global region? I want it to operarate just as it would if it were not sharing a common region. So if I'm looking at rows (11-20) on page 1, I can go to any other page beginning with rows 1-10 there. Then return to page 1 where I left off with rows 11-20 displayed. One solution is NOT to paginate but that's not my preferred solution.
Howard

Howard(...inTraining) wrote:
I was having a delightful time using a common region defined on a global page when I determined that pagination setting was begin carried from one page to the next. Arghhhh! So for example, if I have paged to the second set (page) of rows (11-20) on Page 1 and then I go to Page 2, the second set (page) of rows (11-20) is displayed there. If I go to a page which only has a first set of rows (1-10), I get the pagination error "Invalid set of rows requested, the source data of the report has been modified. Reset Pagination".
The fact that there are different numbers of rows returned on different pages implies that the reports have some local page dependencies, so why try to use a global component? What's the actual requirement? How many pages does the report have to appear on? (Please say it is a report and not a tabular form...)
How can I decouple the pagination for a global region? I want it to operarate just as it would if it were not sharing a common region.
The point is that a global region is just that: a single region that happens to be displayed on multiple pages. It does not create multiple instances of a region on different pages. (Specifically, a region has a single region ID, and this is used to reference it whether it appears on one page or all of them. The region ID is used by the report for the purposes of AJAX refresh, pagination etc.)
A similar situation was discussed a long time ago. I'm rather surprised that Scott regarded it as a bug: the fact that it doesn't seem to have been "fixed" or have a bug number attached may indicate that the others on the APEX team disagreed with him? I haven't tried the workaround he suggested, however I don't think it's likely to be prove a useful line of attack for your issue, as (1) it resets pagination rather than preserving it; and (2) it doesn't appear to be compatible with the AJAX PPR pagination used in more recent versions of APEX.
I can't see any straightforward "solution" (largely because I don't think there's really a problem: the exhibited behaviour is exactly how I expect/want global regions to behave). Pagination processing is undocumented. The current 4.2 apex.widget.report.paginate JS method is specifically annotated as "for internal use only". Search the forum for custom pagination techniques. Messy looking hacks for IRs have previously been suggested.
So if I'm looking at rows (11-20) on page 1, I can go to any other page beginning with rows 1-10 there. Then return to page 1 where I left off with rows 11-20 displayed. One solution is NOT to paginate but that's not my preferred solution.
Assuming that there aren't too many pages involved, the other obvious option is to create unique regions on the required pages. You can achieve some level of reusability by creating SQL Query (PL/SQL function body returning SQL query) reports based on an external function so that there's only a single SQL source to be maintained.
Explain the requirement in more detail. Pagination is not the only option for reducing the quantity of displayed information. Often it's better to display some of all of the data, rather than all of some of it...

How can i write the trigger for Global Temporary Table

Hi Grus,
How can i write the trigger for Global Temporary Table.
I was created the GTT with trigger using the below script .
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
trigger was create successfully, but the wouldn't insert into to EMPNAME Table..
Please guide whether am correct or not? if not kindly give a correct syntax with example
Thanks in Advance,
Arun M M

BEGIN
INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
END;
you are referencing old value in insert stmt.
BEGIN
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
END;then run ur application it works fine...
CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
EMP_C_NAME VARCHAR2(20 BYTE)
ON COMMIT PRESERVE ROWS;
CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
BEFORE DELETE OR UPDATE OR INSERT
ON GLOBAL_TEMP
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
BEGIN
dbms_output.put_line(:OLD.EMP_C_NAME||'yahoo');
INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
dbms_output.put_line(:OLD.EMP_C_NAME);
END;
create table EMPNAME as select * from GLOBAL_TEMP where 1=2
insert into GLOBAL_TEMP values('fgfdgd');
commit;
select * from GLOBAL_TEMP;
select * from EMPNAME;
output:
1 rows inserted
commit succeeded.
EMP_C_NAME
fgfdgd
1 rows selected
EMP_C_NAME
fgfdgd
1 rows selectedgot it Arun
Edited by: OraclePLSQL on Dec 28, 2010 6:07 PM

How can I specify the path in Form Builder 9.0

Hi, everyone,
could anybody tell me how can I specify the path in Form Buidler 9.0? there is problems when I want to attach library in form builder. thanks to Kuldeep RAwat and Natalia Vidal, I know I should specify the path, but I still don't know how to specify, how can I do?
besides, when I run a form, sometime there will be a warnig:
Please acknowledge message
what's that meaning?
thank you very much for your great help

Shay Shmeltzer thank you very much for your so quickly response. I have modified the file and my form can run now!
but, when I open my form, it always suggest me:
FRM-10102: Cannot attach PL/SQL library TalbotStandard. This library attachment will be lost if the module is saved.
so everytime I open my form, I must attach the library manully. I don't know the reason. do you know that or anybody else knows that? thank you very much!
have a good weekend :-)

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

scottypet
For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
on the properties of the first drag to the Timeline.
To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
Then you import your source media, using the appropriate Add Media choice.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
Please let me know if you have any further questions on this or need clarification.
Thank you.
ATR

How can i find the fields for &DOPOS_CPY-WRBT1(I13.0)&

Hi All,
In sapscripts, what is the meaning for (13.0)?
how can i find the fields for &DOPOS_CPY-WRBT1(I13.0)&?
Thanks.

meaning for (13.0) is write to form this variable's 13 character non decimal and 0 character decimal places.
shortly not write decimal places.
DOPOS_CPY-WRBT1 is exist in form caller program. check in abap program not in sapscript.
take care
Çağatay

I scratched the label off on a £25 gift card and it removed the code. How can I get the code for the card?

I scratched the label off on a £25 gift card and it removed the code. How can I get the code for the card?

Click here and request assistance. Gift cards are usually if not always final sale because it would be easy enough for someone dishonest to abuse returns or replacements of them.
(58640)

How can I enlarge the window for writing descriptions for pictures in iphoto 11?

How can I enlarge the window for writing descriptions for pictures in iPhoto 11?

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
LN

How Can I change the Authentication for this Dynpage

Hello ,
I have created a rss feed in special Dnypage.   When I try to connect with rss reader to dynpage it occurs an error 500. The problem is that no logon screen appears and the portal would start the Dynpage with the User Guest.
How Can I change the Authentication for this Dynpage ? I need a LogonScreen
RSS URL:
/irj/servlet/prt/portal/prtmode/rss/prtroot/com.geberit.ep.uwlquick.uwlquickstarter?mode=rss

Hi ,
sry the entry in xml does not help. No Logon Prompt
<?xml version="1.0" encoding="UTF-8"?>
<application>
<application-config>
    <property name="SecurityArea" value="NetWeaver.Portal"/>
    <property name="Vendor" value="xx.com"/>
    <property name="PrivateSharingReference" value="com.sap.portal.htmlb,com.sap.portal.pcd.glservice,com.sap.portal.ivs.iviewservice,usermanagement,,com.sap.netweaver.bc.uwl"/>
</application-config>
<components>
    <component name="uwlquickstarter">
      <component-config>
          <property name="SafetyLevel" value="no_safety"/>
        <property name="ClassName" value="com.xx.portal.uwl.uwlquickstarter"/>
      </component-config>
          <component-profile>
               <property name="AuthScheme" value="default"/>
          </component-profile>
    </component>
</components>
<services/>
</application>

How can we specify the Mailbox for Notes?

Similar Messages

Maybe you are looking for