How can we tuning ASM?

We have used oracle ASM, We found user I/O wait.
WAIT_CLASS TIME_WAITED
Concurrency .084788
System I/O 4.900719
User I/O 113.646004
Configuration .020531
Other 2.664671
Application .001342
Cluster 3.870542
Idle 1481.93262
Commit .106001
Network .112187
we think that want to tuning ASM
How can we tuning ASM?

Hi,
ASM is basically an Oracle integrated volume manager. There is not much to tune here, but there are some things you will need to consider when designing your disks layout.
1. A disk group will perform as it's weakest link, meaning that mixing fast disks and slow disks in the same diskgroup is not a good idea. You want to make sure that all the disks that are part of a disk group, are of the same size and performance characteristics.
2. The more disks you have in a disk group, the better the performance you'll get, since your data blocks will be spread over more physical disks. Most storage companies recommend at least 4 disks per disk group as a minimum.
3. ASM balances the IO bottlenecks automatically, and every night an automatic rebalance operation spreads the blocks based on their IO stats. This is done automatically.
4. You can consult with your storage manufacture for additional ways to improve performance. If you are running on EMC, I suggest you'll read the following document, specifically on the "double striping" concept. Double striping means that the LUNS (which are later discovered as ASM disks) are striped on x physical disks, and you then add a few disks to a diskgroup, which generates additional striping. For more details on EMC:
http://www.oracle.com/technology/products/database/asm/pdf/asm-on-emc-5_3.pdf
If you have a different vendor, check the other best practices at the bottom of this link:
http://www.oracle.com/technology/products/database/asm/index.html
Thanks,
Idan.

Similar Messages

How can validate the ASM size and free space correctly?

Dears ,,
I faced problem in ASM size as it appeared in alert file as below
ORA-19504: failed to create file "+DG_DATA"
ORA-17502: ksfdcre:4 Failed to create file +DG_DATA
ORA-15041: diskgroup space exhausted
So we resize ASM space and large it. But we faced the same problem also although there is free space in ASM.
It seems that the shown free space is not real.
How can validate the ASM size and free space correctly?
Thanks & Regards,,

*Oracle DBA* wrote:
Dears ,,
I faced problem in ASM size as it appeared in alert file as below
ORA-19504: failed to create file "+DG_DATA"
ORA-17502: ksfdcre:4 Failed to create file +DG_DATA
ORA-15041: diskgroup space exhausted
So we resize ASM space and large it. But we faced the same problem also although there is free space in ASM.
It seems that the shown free space is not real.
How can validate the ASM size and free space correctly?
Thanks & Regards,,
I was having this problem. Im my case i couldn add datafiles to a tablespace despite the fact that i was having a lot of space in the asm. Try rebalancing. It might help. In my case rebalancing also didn work because it seems that there need to be a threshold space in all the disks for the rebalancing to happen which was not in my case, so i had to shrink some unused space in the tablespace and then after gaining the required space I rebalanced the disk and then the disks got rebalanced, also i was able to use the free space that was showing .

How can I remove asm and ocr installation in AIX?

Hi,
I try to install single instance with using ASM in AIX.
But I did not make successfully.
Now I want to remove ASM and OCR installation then
I will plan to make new clear installation.
How can I remove asm and ocr ??
Or How can I control my removing is fully correct ?

1) ASM Instance Clean-Up Procedures
Stop all of the databases that use the ASM instance that is running from the Oracle home that is on the node that you are deleting.
On the node that you are deleting, if this is the Oracle home which from which the ASM instance runs, then remove the ASM configuration by completing the following steps. Run the command srvctl stop asm -n node_name for all of the nodes on which this Oracle home exists. Run the command srvctl remove asm -n node for all nodes on which this Oracle home exists. If there are databases on this node that use ASM, then use DBCA Disk Group Management to create an ASM instance on one of the existing Oracle homes on the node, restart the databases if you stopped them.
If you are using a cluster file system for your ASM Oracle home, then ensure that your local node has the $ORACLE_BASE and $ORACLE_HOME environment variables set correctly. Run the following commands from a node other than the node that you are deleting, where node_number is the node number of the node that you are deleting:
rm -r $ORACLE_BASE/admin/+ASMnode_number
rm -f $ORACLE_HOME/dbs/*ASMnode_number
If you are not using a cluster file system for your ASM Oracle home, then run the rm or delete commands mentioned in the previous step on each node on which the Oracle home exists.
2) Deleting an Oracle Clusterware Home Using OUI in Silent Mode
!!! Oracle recommends that you back up your voting disk and OCR files after you complete the node deletion process.
If you ran the Oracle Interface Configuration Tool (OIFCFG) with the -global flag during the installation, then skip this step. Otherwise, from a node that is going to remain in your cluster, from the CRS_home/bin directory, run the following command where node2 is the name of the node that you are deleting:
./oifcfg delif –node node2
Obtain the remote port number, which you will use in the next step, using the following command from the CRS_home/opmn/conf directory:
cat ons.config
From CRS_home/bin on a node that is going to remain in the cluster, run the Oracle Notification Service Utility (RACGONS) as in the following example where remote_port is the ONS remote port number that you obtained in the previous step and node2 is the name of the node that you are deleting:
./racgons remove_config node2:remote_port
On the node to be deleted, run rootdelete.sh as the root user from the CRS_home/install directory. If you are deleting more than one node, then perform this step on all of the other nodes that you are deleting.
From any node that you are not deleting, run the following command from the CRS_home/install directory as the root user where node2,node2-number represents the node and the node number that you want to delete:
./rootdeletenode.sh node2,node2-number
If necessary, identify the node number using the following command on the node that you are deleting:
CRS_home/bin/olsnodes -n
Perform this step only if your are using a non-shared Oracle home. On the node or nodes to be deleted, run the following command from the CRS_home/oui/bin directory where node_to_be_deleted is the name of the node that you are deleting:
./runInstaller -updateNodeList ORACLE_HOME=CRS_home
"CLUSTER_NODES={node_to_be_deleted}"
CRS=TRUE -local
Deinstall the Oracle Clusterware home from the node that you are deleting using OUI as follows by running the following command from the Oracle_home/oui/bin directory, where CRS_home is the name defined for the Oracle Clusterware home:
./runInstaller -deinstall –silent "REMOVE_HOMES={CRS_home}"
Perform step 9 from the previous section about using OUI interactively under the heading "Deleting an Oracle Clusterware Home Using OUI in Interactive Mode".

How can i replace asm sparc v8plus instruction in to v8

Hi Friends
I am installing the log4cxx product and facing the problem at asm code.
Acutally that code i swritten for v8plus sparc versions but my whole project is base on sparc generic , so using arch as generic i want to install ,the stament which giving error is
asm(" cas [%o0], %l0, %l2"); // if (*p = l0) swap([o0], l2);
so please help me How can i replace this statement for work fine on sparc generic architecture
Regards
Jayant

The CAS instruction is available only on v8plus or later architectures. The instruction is an atomic integer comparison used to synchronise mutlithreaded operations.
Without this instruction, you need to perform synchronization some other way. No suitable atomic instruction is available on prior SPARC architectures.
You have two choices:
1. Support only v8plus (UltraSPARC I) architectures or newer, in which you need not modify anything. You will want to specifiy v8plus architecture in building the entire application, however, to get better code generation.
2. Determine what the function containing this code is doing, and re-write it some other way, such as by using mutex operations from the thread library. The resulting code will be much slower.
I suggest option 1. Do you really need to support such old SPARC chips? Sun has not sold or supported such systems for many years, and current Solaris versions won't run on them.

How can I install ASM instance in another oracle home?

Hello:
I have installed Oracle 10 g R2 software at a oracle home,and have create a database with an instance named ocafs withou ASM,now I want to install ASM instance and create a new database using ASM,how can I insure that the ASM is installed in it's own oracle home by using dbca or some other tools? And can I specify the instance name of the ASM?
Thank you very much!

Use the oui.exe (Universal Installer), it checks for existing homes. Based on what you want to do (create a new db with ASM), OUI is smart in that in will not let you create it in an existing home. It will prompt for a different location if you try to use an existing home.
Good luck

How can I tuning Oracle Cluster to faster write data?

I have oracle 10G 4 nodes.
I found oracle write slowly. And more Cluster waiting
so I use one node, that I found write faster.
tell me , How can I tune oracle cluster to write faster.

Please provide more information. There is too little information to answer the question.
Database: 10G: which exact version?
Operating system on which the RAC instances are running?
What kind of shared storage is used?
How are the database machines connected to the central storage?
How did you measure the write slowness?
(please mind that user sessions do not wait for dirty blocks to be written to disk. these blocks are put on the 'dirty list' and written by a seperate process called the database writer. user session do wait on redo writes (by default) however, which is meta-information about the transactions)
What do you mean by 'And more Cluster waiting'?

How can we monitor ASM disk usage on Standby Database.

I am looking for an option to automate deleting the archivelog which is on ASM diskgroup. I could do it if they were not in the ASM disk group with writing a script but with ASM I can't. Is there anything that I can monitor and get notified periodically reg. disk utilization on ASM and then write a script to delete some of the files especially archivelogs if needed.

Hi
what is your Oracle version and your OS?

How can I use strip by ASM

Hello buddy
I am puzzle about strip.
Do I need to create PV->VG->stripped Raw LV and set up ASM base on it or just use ASM strip.
How can I use ASM strip not LVM strip ?
Thanks

Hi,
A quote from MoS
- ASM & RAID striping are complimentary to each other. When a SAN or disk array provides striping, that can be used in a manner which is complementary to ASM.
- Oracle ideally suggest that the RAID stripe size at the SAN layer should match ASM stripe size (1MB by default). However, if the above is not possible (1MB stripe at storage level),then a stripe size of 256K/128K/512k should be ok. As long ASM 1MB stripe size is a multiple of hardware stripe size, I/O is aligned at hardware level. Otherwise, a single I/O can be split into multiple disks and cause multiple read writes and excessive i/o operations.
- ASM mirroring has a small overhead on the server (specially on write performance) where external hardware mirroring performs the function on the storage controller.
With external mirroring, you need to reserve disks as hot spares. With ASM, hot spares are not necessary and therefore, more efficient use of the storage capacity.
- ASM reduces the chance of mis-configuation and human error because of failure groups. With external RAID, you have to carefully plan your redundant controllers and paths which requires higher admin overhead.
Cheers

How can I add a new controlfile in ASM?

In the ASM,I can't copy any file.How Can I create a new online controlfile? Thanks!

You can use "alter database backup controlfile to trace" command to get the control file contents.
Now you can use create controlfile:
1) If you use resetlogs, use file creation context form for specification of log files.
2) If you use resetlogs, use file reference context.
Why do you want to create a new control file. Is it for multiplexing purpose?
Reference: Chapter-12 of Oracle database administrator guide 10gR2
search for title "Creating a Control File in ASM" ...
Hope this will help you.
Regards,
Neeraj

How can I move back the rman convert file from file system to ASM?

I have no idea on pluging-in the data files which were unloaded as follows:
SQL> alter tablespace P_CDDH_DSPGD_V1_2011 read only;
SQL> alter tablespace P_IDX_CDDH_DSPGD_V1_2011 read only;
SQL> exec dbms_tts.transport_set_check('P_CDDH_DSPGD_V1_2011,P_IDX_CDDH_DSPGD_V1_2011',true);
SQL> select * from transport_set_violations;
UNIX> expdp tossadm@pmscdhf1 dumpfile=ttsfy1.dmp directory=trans_dir transport_tablespaces = P_CDDH_DSPGD_V1_2011,P_IDX_CDDH_DSPGD_V1_2011
RMAN> convert tablespace P_CDDH_DSPGD_V1_2011, P_IDX_CDDH_DSPGD_V1_2011 format = '/appl/oem/backup/temp/%I_%s_%t_extbspace.dbf';
Starting conversion at source at 03-OCT-13
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=116 instance=pmscdhf11 device type=DISK
channel ORA_DISK_1: starting datafile conversion
input datafile file number=00079 name=+PMSCDHF1/p_cddh_dspgd_v1_2011_01.dbf
converted datafile=/appl/oem/backup/temp/3536350174_2820_827849001_extbspace.dbf
channel ORA_DISK_1: datafile conversion complete, elapsed time: 00:02:15
channel ORA_DISK_1: starting datafile conversion
input datafile file number=00080 name=+PMSCDHF1/p_idx_cddh_dspgd_v1_2011_02.dbf
converted datafile=/appl/oem/backup/temp/3536350174_2821_827849136_extbspace.dbf
channel ORA_DISK_1: datafile conversion complete, elapsed time: 00:01:45
Finished conversion at source at 03-OCT-13
Starting Control File Autobackup at 03-OCT-13
piece handle=/dbms/oracle/r1110/db_01/dbs/c-3536350174-20131003-02 comment=NONE
Finished Control File Autobackup at 03-OCT-13
SQL> drop tablespace P_CDDH_DSPGD_V1_2011 including contents;
SQL> drop tablespace P_IDX_CDDH_DSPGD_V1_2011 including contents;
Afterward, how can I relocate the backup files "/appl/oem/backup/temp/3536350174_2820_827849001_extbspace.dbf", "/appl/oem/backup/temp/3536350174_2821_827849136_extbspace.dbf" back to the ASM group +PMSCDHF1 ???

The 11.1 documentation only says "Enables you to copy files between ASM disk groups on local instances to and from remote instances" and "You can also use this command to copy files from ASM disk groups to the operating system."
http://docs.oracle.com/cd/B28359_01/server.111/b31107/asm_util.htm#CHDJEIEA
The 11.2 documentation says "Copy files from a disk group to the operating system Copy files from a disk group to a disk group Copy files from the operating system to a disk group"
http://docs.oracle.com/cd/E11882_01/server.112/e18951/asm_util003.htm#CHDJEIEA
I've never tried 11.1
Hemant K Chitale

How can I change the tuning (pitch) of apple loops with logic?

how can I change the tuning (pitch) of apple loops with logic? Is it possible at all ??? Cant get a clear information . I´m a user of Logic 9.14

Thanks.....but... How to change the pitch within a song arrange, lets for example say the loop is in F in original tune and i want him to be played in the song arrange maybe in A.... when i draw it in the arrange window, the tune goes back to the original...

How the below querry can be tuned

Hi,
Below is my querry. I just need a technique and how a below querry can be tuned
SELECT DISTINCT rop1.routingid,rh.routing_id,rh.start_date,rh.location_id,rh.material
FROM mst_routing_header rh,MST_ROUTINGOPERATION rop1
WHERE (rop1.routingid,rh.material,rh.location_id) IN (SELECT DISTINCT rop.routingid,itm.mfr_item_id,ibr.producedlocationid
FROM MST_ITEM itm,MST_ROUTINGHEADER rthdr,MST_ITEMBOMROUTING ibr,MST_ROUTINGOPERATION rop
WHERE rthdr.routingid =ibr.routingid
AND rthdr.location_id =ibr.producedlocationid
AND ibr.produceditemid=itm.item_id
AND rthdr.routingid=rop.routingid
AND rthdr.location_id=rop.location_id
AND rthdr.routingtype='TEST'
AND ibr.sys_ent_state='ACTIVE'
AND rthdr.sys_ent_state='ACTIVE'
AND rop.sys_ent_state='NEW')
AND rh.sys_ent_state='ACTIVE';
Thanks in advance

AFAIK,
A very traditional way if you dont know how to read plan table.
SELECT DISTINCT a.routing_id
     , a.platform
     , a.equipment_group
     , a.equipment_category
     , a.priority as eqpp
     , b.priority as rdtlp
FROM   mst_equipment_priority a
     , mst_routing_detail      b
     , mst_resource_master     c
WHERE a.routing_id = l_routingid
AND    a.routing_id=b.routing_id
AND    a.platform=b.platform
AND    b.platform in
       ( SELECT DISTINCT platform
         FROM   mst_routing_detail
         WHERE routing_id = l_routingid )
AND    a.equipment_group = c.equipment_group
AND    a.equipment_category = c.equipment_category
AND    c.planning = 'Y'
AND    c.equipment_type = l_equipment_type
AND    a.sys_ent_state = 'ACTIVE'
AND    b.sys_ent_state = 'ACTIVE'
AND    c.sys_ent_state = 'ACTIVE'
ORDER BY a.equipment_category DESC,rdtlp ASC, eqpp ASC;As above query just run it through by making remarks at
SELECT DISTINCT a.routing_id
     , a.platform
     , a.equipment_group
     , a.equipment_category
     , a.priority as eqpp
     , b.priority as rdtlp
FROM   mst_equipment_priority a
     , mst_routing_detail      b
     , mst_resource_master     c
WHERE a.routing_id = l_routingid
AND    a.routing_id=b.routing_id
AND    a.platform=b.platform
--AND    b.platform in
--       ( SELECT DISTINCT platform
--         FROM   mst_routing_detail
--         WHERE routing_id = l_routingid )
AND    a.equipment_group = c.equipment_group
AND    a.equipment_category = c.equipment_category
AND    c.planning = 'Y'
AND    c.equipment_type = l_equipment_type
AND    a.sys_ent_state = 'ACTIVE'
AND    b.sys_ent_state = 'ACTIVE'
AND    c.sys_ent_state = 'ACTIVE'
ORDER BY a.equipment_category DESC,rdtlp ASC, eqpp ASC;See is it the performance killer if not then remove DISTINCT from yours main query and see the is it main performance killer.
SELECT a.routing_id
     , a.platform
     , a.equipment_group
     , a.equipment_category
     , a.priority as eqpp
     , b.priority as rdtlp
FROM   mst_equipment_priority a
     , mst_routing_detail      b
     , mst_resource_master     c
WHERE a.routing_id = l_routingid
AND    a.routing_id=b.routing_id
AND    a.platform=b.platform
AND    b.platform in
       ( SELECT DISTINCT platform
         FROM   mst_routing_detail
         WHERE routing_id = l_routingid )
AND    a.equipment_group = c.equipment_group
AND    a.equipment_category = c.equipment_category
AND    c.planning = 'Y'
AND    c.equipment_type = l_equipment_type
AND    a.sys_ent_state = 'ACTIVE'
AND    b.sys_ent_state = 'ACTIVE'
AND    c.sys_ent_state = 'ACTIVE'
ORDER BY a.equipment_category DESC,rdtlp ASC, eqpp ASC;if not then
SELECT a.routing_id
     , a.platform
     , a.equipment_group
     , a.equipment_category
     , a.priority as eqpp
     , b.priority as rdtlp
FROM   mst_equipment_priority a
     , mst_routing_detail      b
     , mst_resource_master     c
WHERE a.routing_id = l_routingid
AND    a.routing_id=b.routing_id
AND    a.platform=b.platform
AND    b.platform in
       ( SELECT DISTINCT platform
         FROM   mst_routing_detail
         WHERE routing_id = l_routingid )
AND    a.equipment_group = c.equipment_group
AND    a.equipment_category = c.equipment_category
AND    c.planning = 'Y'
AND    c.equipment_type = l_equipment_type
AND    a.sys_ent_state = 'ACTIVE'
AND    b.sys_ent_state = 'ACTIVE'
AND    c.sys_ent_state = 'ACTIVE'
--ORDER BY a.equipment_category DESC,rdtlp ASC, eqpp ASC;If not then read yours plan table,and paste it here otherwise no one here can give you clue.
Khurram

How can I find the ASM port

Hi,
When I use OEM grid control to monitor the ASM, during the configuration, I was asked to enter port, SID, please tell me from which file I can find the ASM instance port information?
Thanks,
Hank
USA 2007

hank, we have dozens of listeners on different ports and i'm not sure what it does for us. this is a legacy configuration going back to the days when our connect traffic overwhelmed the ability of the unix system to respond to one (or two or three ...) port(s). today's processors and memory are much faster and software is more efficient but there is still a point where connect traffic will overburden the port and then you need another listener. but all those listeners create a maintenance burden for me (and you) and can create a lot of confusion. bringing down one instance should never affect the availability of other instances. i think chandra meant bringing down the listener rather than instance. in 10gr2 i never turn down any listeners at any time for any maintenance. crs restarts all the listeners on any node after an unplanned outage and i never touch them. you can control connections to instances using ha services rather than listener availability. hth, mike

How can configure weblogic for use Hibernate

Hello everybody, my question is how can I configureit weblogic for use hibernate.
I'm using JDeveloper 11g but I did not show any error when I run my jsp page, the page shows me all, but it is as if it never made the connection. the data of my table are empty.
Thanks for your answers.

thanks for answer. The jar was wrong, now I get not error, but also does not show me anything on my board ADF. seems to not connect. this is what I get in your log JDeveloper:
C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\Middleware\jdeveloper\modules\features\adf.share_11.1.1.jar;;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\Intel\DMIX;C:\Archivos de programa\Java\jdk1.6.0\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xmx512m -Djbo.34010=false -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1 -Doracle.home=C:\Oracle\Middleware\jdeveloper -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1\config\oracle\jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<06-02-2009 10:50:27 AM VET> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\antlr-2.7.6.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\asm.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\cglib-2.1.3.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\commons-collections-3.2.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\commons-logging-1.0.4.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\dom4j-1.6.1.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\hibernate3.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jdom.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jta.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\jtds-1.2.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\log4j-1.2.14.jar;C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\lib\mysql-connector-java-3.1.7-bin.jar;C:\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;C:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<06-02-2009 10:50:28 AM VET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<06-02-2009 10:50:28 AM VET> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008
WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008
WebLogic Server Temporary Patch for CR381265 Wed Oct 08 10:15:58 PDT 2008
WebLogic Server Temporary Patch for CR380913 Wed Oct 15 13:24:22 PDT 2008
WebLogic Server Temporary Patch for CR381739 Tue Oct 21 14:06:14 IST 2008
WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<06-02-2009 10:50:29 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<06-02-2009 10:50:29 AM VET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<06-02-2009 10:50:29 AM VET> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<06-02-2009 10:50:32 AM VET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<06-02-2009 10:50:36 AM VET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<06-02-2009 10:50:36 AM VET> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<06-02-2009 10:50:37 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<06-02-2009 10:50:37 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<06-02-2009 10:50:38 AM VET> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "FAMILIA_KAWAIDA.mshome.net", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
<06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "FAMILIA_KAWAIDA", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
<06-02-2009 10:50:38 AM VET> <Warning> <Server> <BEA-002611> <Hostname "localhost", maps to multiple IP addresses: 10.0.0.1, 201.222.105.26, 127.0.0.1>
<06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 201.222.105.26:7101 for protocols iiop, t3, ldap, snmp, http.>
<06-02-2009 10:50:38 AM VET> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<06-02-2009 10:50:38 AM VET> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 16953 ms.
DefaultServer started.
[Running application TVB on Server Instance DefaultServer...]
---- Deployment started. ---- Feb 6, 2009 10:50:43 AM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2009-02-06 10:50:43.64: Writing WAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB\TVB-TVB-webapp
2009-02-06 10:50:43.687: Wrote WAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB\TVB-TVB-webapp
2009-02-06 10:50:43.906: Writing EAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB
2009-02-06 10:50:43.921: Wrote EAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\TVB
Deploying Application...
<06-02-2009 10:50:47 AM VET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application TVB is not versioned.>
06-02-2009 10:50:47 AM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState
INFO: Cleaning up application state
ADF Library non-OC4J post-deployment (millis): 16
06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
ADVERTENCIA: A duplicate definition for the feature "AdfDvtGraph" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
ADVERTENCIA: A duplicate definition for the feature "AdfDvtGauge" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
06-02-2009 10:51:08 AM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures
ADVERTENCIA: A duplicate definition for the feature "AdfRichPivotTable" has been found at zip:C:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/TVB/6mq9lg/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. A feature with the same name was originally defined at zip:C:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.
Application Deployed Successfully.
Elapsed time for deployment: 26 seconds
---- Deployment finished. ---- Feb 6, 2009 10:51:09 AM
Run startup time: 26766 ms.
[Application TVB deployed to Server Instance DefaultServer]
Target URL -- http://127.0.0.1:7101/TVB-TVB-context-root/faces/seguridad/grupo.jspx
06-02-2009 10:51:17 AM oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImpl setLifecycleContextBuilder
ADVERTENCIA: ADFc: Sustituyendo la implementación del ciclo de vida de la página de ADF por 'oracle.adfinternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
06-02-2009 10:51:17 AM oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass
INFO: Marco portátil JMX inicializado con el SPI de plataforma "class oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl"
06-02-2009 10:51:17 AM oracle.adfinternal.controller.util.model.AdfmInterface initialize
INFO: ADFc: BindingContext está presente, utilizando las API de ADFm para DataControlFrames.
06-02-2009 10:51:17 AM oracle.adfinternal.controller.metadata.provider.MdsMetadataResourceProvider <init>
INFO: ADFc: Almacenamiento de recursos de metadatos de MDS en la caché del controlador ACTIVADO.
06-02-2009 10:51:17 AM oracle.adf.controller.internal.metadata.MetadataService$Bootstrap add
INFO: ADFc: Cargando metadatos de inicialización de '/WEB-INF/adfc-config.xml'.
thanks in advance for your response.

How can i see traffic being dropped by Firewall?

Hi All. I have a problem where users on the inside of my network cannot receive emails when they use outlook and windows live to external mail servers. If email is unencrypted (eg hotmail) there are no issues. If however email is encrypted ( gmail on por 465 or outlook over ssl) then the users can receive but cannot send emails. I have already disable inspect esmpt and i have removed any outbound access-list. I want to see if there is anything elese that could be blocking the traffic. How can i do that?
My Firewall config it attached.
Marlon

Hi All. I found a work around for the problem. I took Jose's advice and looked at it from the end point and found that windows 7 handles tcp windowing diffrently than previous OS's. I still think there is an issue somewhere but i am not sure where esle to look so i will work with this for now.
See note below. Thanks for your help guys.
Disable the auto tuning
Check the state or current setting of TCP Auto-Tuning
1.          Open elevated command prompt with administrator’s privileges.
2.          Type the following command and press Enter:
netsh interface tcp show global
The system will display the following text on screen, where you can check on the Auto-Tuning setting:
Querying active state…
TCP Global Parameters
Receive-Side Scaling State : enabled
Chimney Offload State : enabled
Receive Window Auto-Tuning Level : normal
Add-On Congestion Control Provider : none
ECN Capability : disabled
RFC 1323 Timestamps : disabled
Disable TCP Auto-Tuning
1.          Open elevated command prompt with administrator’s privileges.
2.          Type the following command and press Enter:
netsh interface tcp set global autotuning=disabled
Enable TCP Auto-Tuning
1.          Open elevated command prompt with administrator’s privileges.
2.          Type the following command and press Enter:
netsh interface tcp set global autotuning=normal
http://www.mydigitallife.info/disable-tcp-auto-tuning-to-solve-slow-network-cannot-load-web-page-or-download-email-problems-in-vista/

How can we tuning ASM?

Similar Messages

Maybe you are looking for