How connect to a Braven 650 SPEAKER when only link is to a 650 headset appears

How connect a Braven 650 SPEAKER when only link is to a 650 HEADSET?

Have you tried discoverable? Or try using the headset? If all else fails refer to the owners manual:) I would also try calling the manufacturers support, as sometimes these manuals are translated from Chinese, and much can be lost in translation. The site offered little in the way of info. Good luck, just tried to help. All the best

Similar Messages

How do you turn off the speaker and only use earphones to hear music written in software?

I have software with which I write music. I would like to listen to the piano part produced by the computer while recording the voice part. To do this, I must turn of the computer's speaker and hear the piano part only through ear phones. How can I do this?

Not sure what you're talking about. The MacPro doesn't have any built in camera as far as I know. If you've got a monitor with a built in camera, there's probably a way to disconnect it.

How to use data in a ResultSet when only one record in set?

Hi.
Using a prepared statement which invokes a SELECT * from <table> where <primary key> = <unique value>.
This is executed and the results sent to a resultSet.
The only problem is that only one entry is in the resultSet. I want to parse the results and invoke a new class based on the results.
So I have:
statement = conn.prepareStatement ("SELECT First_Name, Last_Name, Street, Unit, City, Province, Postal_Code" +
" from Customer where CustomerID = ?");
statement.setInt (1, custID);
rset = statement.executeQuery();
rset.next();
cust = new Customer (custID,
rset.getString ("First_Name"),
rset.getString ("Last_Name"),
rset.getString ("Street"),
rset.getString ("Unit"),
rset.getString ("City"),
rset.getString ("Province"),
rset.getString ("Postal_Code"));
statement.close();
rset is a ResultSet. And I'm pretty sure that something like this is WRONG. But one thing I want to know, is there ANY way to properly parse a resultset with only one record?
Thanks.

I think I should clarify what I was doing: I'm trying to insert a record into a table, and with the ID that I obtain, use it to retrieve the data.
I did put a commit in there, but someone suggested that the commit won't work in this scenario.
Here is bits of the code that I'm using. By the time insertCustomer is invoked, custID is already populated. The insert works because I checked the table afterwards using a sql query and all my entries posted are there.
    private void insertCustomer (HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException
        Connection conn = null;
        PreparedStatement statement = null;
        try {
            conn = DriverManager.getConnection (url, userid, password);
            statement = conn.prepareStatement ("INSERT INTO CUSTOMER (CustomerID, First_Name, Last_Name," +
                    " Street, Unit, City, Province, Postal_Code) values (?, ?, ?, ?, ?, ?, ?, ?)");
            statement.setInt (1, custID);
            statement.setString (2, firstname);
            statement.setString (3, lastname);
            statement.setString (4, address);
            statement.setString (5, unit);
            statement.setString (6, city);
            statement.setString (7, province);
            statement.setString (8, postalcode);
            statement.executeUpdate();
            conn.commit();
            statement.close();
        catch (SQLException e)
            throw new ServletException (e);
        finally
            try
                if(statement != null)
                    statement.close();
                if(conn != null)
                    conn.close();
            catch (SQLException e)
                throw new ServletException(e);
    private String getCustRec (HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException
        Connection conn = null;
        PreparedStatement statement = null;
        ResultSet rset = null;
        CustomerJDBC cust = null;
        try
            conn = DriverManager.getConnection (url, userid, password);
            statement = conn.prepareStatement ("SELECT First_Name, Last_Name, Street, Unit, City, Province, Postal_Code" +
                    " from Customer where CustomerID = ?");
            statement.setInt (1, custID);
            rset = statement.executeQuery();
            rset.next();
            cust = new CustomerJDBC (custID,
                    rset.getString ("First_Name"),
                    rset.getString ("Last_Name"),
                    rset.getString ("Street"),
                    rset.getString ("Unit"),
                    rset.getString ("City"),
                    rset.getString ("Province"),
                    rset.getString ("Postal_Code"));
            statement.close();
        catch (SQLException e)
            throw new ServletException (e);
        finally
            try
                if(statement != null)
                    statement.close();
                if(conn != null)
                    conn.close();
            catch (SQLException e)
                throw new ServletException(e);
        return "/CustomerCreatedJDBC.jsp";
    }The Constructor method of the class CustomerJDBC appears something like this:
public CustomerJDBC (int id, String fname, String lname, String addr, String unit, String city, String prov, String pcode)
        this.custID = id;
        this.firstname = fname;
        this.lastname = lname;
        this.address = addr;
        this.unit = unit;
        this.city = city;
        this.province = prov;
        this.postalcode = pcode;
    }Thanks for your help.
Edited by: tahna_los on Nov 16, 2008 11:49 PM

How to get Safari to suggest passwords when only one field is present?

Safari works great when there are two fields to enter a password - a password field followed by a "confirm password" field - but doesn't seem to work when there is only one field to enter a new password. Any suggestions?

Hi,
we have done something like this using seltab.
One inputfield, user can enter anything same like in google like
name:ab*,dob:1972
write a conversion method to parse this input to seltab like
    clear ls_seltab.
    ls_seltab-sign = 'I'.
    if lv_value cs '*'.
      li_lng = sy-fdpos.
      ls_seltab-option = 'BT'.
    else.
      ls_seltab-option = 'EQ'.
      ls_seltab-low    = lv_value.
    endif.
use your seltab to retrieve data from the table.
In anyway.. you can search resources in this direction to build your solution.

How can I verify my iTunes account when the link doesn't appear in the email?

I updated my iPhone with the latest update, and my iTunes account now has to be verified. I've resent the email to myself about ten times, but the link will not appear. I can't use iCloud and I can't redeem iTunes cards to purchase songs. I'm not sure what to do.

You can verify by signing in at My Apple ID. You'll receive an email prompting you to verify.
If that doesn't help, try this...
Launch iTunes on your computer
From the iTunes menu bar click iTunes / Preferences then select the Advanced tab.
Click: Reset warnings and Reset cache
Click OK.
Restart your computer, restart your iPhone.
Go to the iTunes store on your computer then click Redeem under Quick Links right side of the window.
See if you can redeem a gift card.

Hi, I'm unable to use my speaker when I'm using Mac OS. However, I'm able to do so for Windows 7 OS on Bootcamp. Can anyone please advise on how to rectify this problem? I would greatly appreciate your help, thank you.

Hi, I'm unable to use my speaker when I'm using Mac OS, which means I'm unable to unmute, decrease or increase the volume. However, I'm able to do so for Windows 7 OS on Bootcamp. Can anyone please advise on how to rectify this problem? I would greatly appreciate your help, thank you.

Hi Zac, sorry to hear about your troubles, but that's why us other users are here to try to help in these instances.
Open Console in Utilities & see if there are any clues or repeating messages when this connection drop happens.

I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I want to unistall through the control panel it doesn't let me, anyone knows how to uninstall it??

I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I try to unistall through the control panel it doesn't let me, an Uninstall Failed message appears, anyone knows how to uninstall it??
I've already tried Adobe Cleaner Tool, but it doesn't work, as the program is not listed as one of the proposed
Does anyone know how to uninstall it??
Thank you

Which are you after... installing Captivate 8 or uninstalling it (whatever "it" is)?
Sign in, activation, or connection errors | CS5.5 and later
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

How to setup a new apple ID when one is already connected to ipod

how to setup a new apple ID when one is already connected to ipod

See:
Frequently Asked Questions About Apple ID
Just what do you want to do?

I connected my phone to computer and when I did I needed an update on my phone. when I did this all of my music on phone disappeared. How do I get my music back?

I connected my phone to computer and when I did I needed an update on my phone. when I did this all of my music on phone disappeared. How do I get my music back?

Resync it from your iTunes library. Music is not included in your backup.
http://support.apple.com/kb/HT4946

HT1414 how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then re

how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then restore to enable to open it..what should i do?i cannot bring it to the smart center because i lost my receipt..is there any chance to recover it?thank you so much..i already update my operating system to ios 6.1.3 but when i recover my back up the operating system was ios 6.1.2..

Your phone is in recovery mode. Did you plug it to the computer running itunes? What happend?

I have a G5 dual core, How do I connect an iPhone to this computer, when the USB is connected nothing happens

Please help, just got first Mac, finding my way.
How do I sync my iPhone 4
When I connect the USB nothing happens
Mac G5 dual cpu
OSX 10.4.11

Click here.
(64414)

I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

RESET YOUR ROUTER
No. Reset your router.

When trying to connect to Airplay speakers I get error message "The network connection timed out" although some sort of connection is made as the speaker is turned on. Same thing with Apple TV. Is the distance from my speaker/ TV the problem?

When trying to connect from iTunes to Airplay speakers I get error message “The network connection timed out” although some sort of connection is made as the speaker is turned on. Same thing with Apple TV. Is the distance between my PC and the speaker or the AppleTV the problem?

Hi whitwick,
If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Thanks for using Apple Support Communities.
Best,
Brett L

When I am connected to my home wifi, it says I am connected but the 4G icon doesn't go away. How can I make that go away when I am connected?

When I am connected to my home wifi, it says I am connected but the 4G icon doesn't go away. How can I make that go away when I am connected?

When I'm at my home, and on my Wifi, my 4G icon on my LG G2 is still present. No big deal. If the bits can flow via WiFi, that's what they'll do.
You might try (if you really MUST shut off the cellular radio):
Settings, Network Connections and More networks. Select Mobile Networks and uncheck Mobile data and data roaming.
Not sure if that will work - but give it a try.

HT5517 how do I connect my bowers & wilkins airplay speaker to my apple tv?

how do I connect my bowers & wilkins airplay speaker to my apple tv?

A cable typically works best.

How connect to a Braven 650 SPEAKER when only link is to a 650 headset appears

Similar Messages

Maybe you are looking for