How could I add a new library to my LABVIEW

Hi,
I juat download the LABVIEW library of Agilent 33250A,and put it in the right place as it said.
However,I can't use the icons because they all were shown as a question symbol.
Best Regards

Hi,
I don't know if you downloaded the Plug and Play or the IVI driver but make sure that you have installed the rest of the software such as VISA or the IVI Compliance Package.
If it is an IVI driver then you don't need to put the files anywhere, you just need to run the installer. If it is a plug and play driver, then double-click on the zip file and then extract the whole content to the lib folder.
Make sure that you downloaded the driver for the correct LabVIEW version.
Hope this helps.
Ricardo S.
National Instruments.

Similar Messages

  • How could I add a new pakage to JDK

    I want to import org.appache.fop.apps.*;(fop.jar) in my program, and how could I add these pakages to JDK.
    Thanks for help.

    Remember, when you upgrade JDK you will need to do the copy again. You may want to consider keeping your packages separate from JDK.
    Ron 8)

  • How to add a new arm processor to labview!!!

    Hi...
    I'm using Labview 2009 for using the Arm embedded module.
    I plan to use the LPC1768 NXP Cortex-M3 microcontroller. when i was going to create a new ARM project, i couldnt find this Micro in the Target Processor Type!!!
    How can I Add a new MCU to the Labview?
    welcome to any suggestions!!!
    TanQs

    Hi,
    If you have NI LabVIEW Microprocessor SDK installed then you should follow the tutorial linked in the post above. If you don't have NI LabVIEW Microprocessor SDK then you would need to modifying a generic 'Other' target project that is installed by the LabVIEW Embedded Module for ARM Microcontrollers to work with LPC1768. See this tutorial for more details. As explained in the tutorial you will need to physically change the TgtSupp.xml to include the LPC1768 as a target.
    Sev K.
    Applications Engineering Specialist | CLA
    National Instruments

  • How to add a new library to an existing java project

    Hi ,
    i just moved to writing java applications in jedit after working in eclipse for a while , in eclipse it was easy to add a new library jusr rightclick and add but how do i do the same when working with a text editor of jedit style and what do i need to change in order of javac.exe and java.exe to work properly , i tried google but i got no comprehensive article about it i'd appreciate a link or even better a simple explanation .
    thanks in advance .

    you just need to include it on your classpath

  • How can I back up my I Tunes library to an external hard drive?  Also how do I add my new content to the back up?

    How can I back up my I Tunes library to an external hard drive?  Also how do I add my new content to the back up?

    See this User Tip.
    tt2

  • How do you add a new ipod touch to an existing library?

    How do you add a new device, an ipod touch to an existing library? The computer isn't recognizing therefore new device.

    Open itunes, connect ipod, select what you want to sync, sync.

  • HT204053 how do I add a new mac email address

    How do I add a new me.com email address?  With mobileme it seemed like you could add up to 5 email addresses but not quite sure how it works now with icloud.

    With iCloud, you only get one address per iCloud account.  You can create up to 3 alias adress names, but these still receive email to the same inbox (see http://support.apple.com/kb/PH2622).  If you already have a @me address, you should have been assigned a @icloud address too.  This operates like an alias address, but does not count toward your total of 3.
    Also, new iCloud accounts only receive @icloud addresses; @me (and @mac) addresses are no longer available.

  • How can I add a new column in compress partition table.

    I have a compress partition table when I add a new column in that table it give me an error "ORA-22856: CANNOT ADD COLUMNS TO OBJECT TABLES". I had cretaed a table in this clause. How can I add a new column in compress partition table.
    CREATE TABLE Employee
    Empno Number,
    Tr_Date Date
    COMPRESS PARTITION BY RANGE (Tr_Date)
    PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
    PARTITION JUNK Values LESS THAN (MAXVALUE));
    Note :
    When I create table with this clause it will allow me to add a column.
    CREATE TABLE Employee
    Empno Number,
    Tr_Date Date
    PARTITION BY RANGE (Tr_Date)
    PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
    PARTITION JUNK Values LESS THAN (MAXVALUE));
    But for this I have to drop and recreate the table and I dont want this becaue my table is in online state i cannot take a risk. Please give me best solution.

    Hi Fahed,
    I guess, you are using Oracle 9i Database Release 9.2.0.2 and the Table which you need to alter is in OLTP environment where data is usually inserted using regular inserts. As a result, these tables generally do not get much benefit from using table compression. Table compression works best on read-only tables that are loaded once but read many times. Tables used in data warehousing applications, for example, are great candidates for table compression.
    Reference : http://www.oracle.com/technology/oramag/oracle/04-mar/o24tech_data.html
    Topic : When to Use Table Compression
    Bug
    Reference : http://dba.ipbhost.com/lofiversion/index.php/t147.html
    BUG:<2421054>
    Affects: RDBMS (9-A0)
    NB: FIXED
    Abstract: ENH: Allow ALTER TABLE to ADD/DROP columns for tables using COMPRESS feature
    Details:
    This is an enhancement to allow "ALTER TABLE" to ADD/DROP
    columns for tables using the COMPRESS feature.
    In 9i errors are reported for ADD/DROP but the text may
    be misleading:
    eg:
    ADD column fails with "ORA-22856: cannot add columns to object tables"
    DROP column fails with "ORA-12996: cannot drop system-generated virtual column"
    Note that a table which was previously marked as compress which has
    now been altered to NOCOMPRESS also signals such errors as the
    underlying table could still contain COMPRESS format datablocks.
    As of 10i ADD/SET UNUSED is allowed provided the ADD has no default value.
    Best Regards,
    Muhammad Waseem Haroon
    [email protected]

  • How can I add a new record in an Access table.

    How can I add a new record in access with LabView, using activex, without using the database connectivity tools.
    Message Edited by Noawena on 05-16-2008 09:25 AM

    Much easier with a toolkit but you could use ADO objects,
    get connection, make a SQL object "INSERT record INTO table where  ...." 
    Execute the parameterized query
    Free up record sets data
    close connection when done.
    This is a very simplified version
    Paul
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • How can I add the new AP license to HA 5508 WLC?

    Hi,
    My customer has two 5508 WLC in HA mode and these devices have 250 AP license. Customer bought 50 AP and 50 AP license. But I could not add the license to WLC! When I check the Management>Software Activation> tab there are only two options under the tab these are "Licenses" "License Usage". There is no "Command" option in there. Also I tried add on CLI but this error log appeared " !!!! Blocked: Changing License configurations on Secondary unit is blocked !!!! " 
    I think this is possible when disable the HA but is there anybody know this how can I add the new 50 AP license to HA WLC without disable the HA?
    Thanks,
    Burhan

    Hi,
    Thank you for your reply. 
    Yes I know the controllers synchronize with the enabled license and the 250 AP license bundled with two device there is no problem.
    I want to add new 50 AP license in addition 250 AP license. Because customer has 300 AP's.
    As I said, When I check the Management>Software Activation> tab there are only two options under the tab these are "Licenses" "License Usage". There is no "Command" option in there.
    Thanks,

  • How could we add fields in web ui

    Hello Expert,
    Could  any body say that how could I add new field in Web UI... Please revert...
    Thanks
    Satish Lath

    Hi Satish,
    What Silpa has replied is the approach to bring an existing field into webui. If you have a requirement to add a new field then you can do it either through AET or EEWB.
    http://wiki.sdn.sap.com/wiki/display/CRM/EEWB-AddingTableattribute
    /people/vikash.krishna/blog/2009/07/14/crm-70-how-to--4-adding-custom-fields-with-the-new-application-enhancement-tool-aet
    Follow the above blogs to know more about EEWB and AET.
    Thanks,
    Raman

  • Elements 11 vs 13: how can I add a new place tag to my PSE13 database without using the wretched and totally inadequate map technology  that Elements 13 wants to impose.

    HI,
    I have recently installed Elements 13 having used Elements 11.0 successfully to build a database of 30,000 plus images indexed by place, people, and photo date. Elements 11 allowed me to add new places which are meaningful to me but which are a complete mystery to the mapping technology of Elements 13. For example some years ago I lived in London in a road called Argyle Road. In elements 11 I could enter the place tag as Argyle Road. In Elements 13 I am required to locate Argyle Road on the map, but the map presupposes that the Argyle Road I am referring to is in Ealing in West London. It is not!
      I now live in a place called Broadsands but the Elements 13 Map places this 0.5 miles away from what I would describe as Broadsands.
      So the question: how can I add a new place tag to my database without using the wretched and totally inadequate map technology  that Elements 13 wants to impose.

    Thank you for your quick response, BalusC. I really appreciate your answer.
    Yes, you are right. If I manually code the same amount of those components in the JSF pages instead of generating them dynamically, the server will still run out of memory. That is to say, JSF pages might not accommodate a great deal of concurrent visiting. If I upgrade the server to just allow 1,000 teachers making their own test papers at the same time, but when over 2,000 students take the same questionnaire simultaneously, the server will need another upgrading. So I have to do what you have told me, using JS+DOM instead of upgrading the server endlessly.
    Best Regards, Ailsa

  • How do I add my new lapttop to my family iTunes? I downloaded music, but cannot play it

    How do I add my new lap top to my family iTunes? I downloaded music, but cannot play it on my laptop

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • How do I add a new mailbox on my iPhone?

    How do I add a new mailbox on my iPhone 4S. I have tried going to the "Mailboxes" and selecting edit but that just takes me to the "New Message" screen.

    I don't need a "New Account". I would like to add some mailbox folders to store mail I choose to keep. Currently my choices are only:
    Inbox
    Drafts
    Sent
    Trash
    Does iPhone allow for additional folders within mailboxes?
    Re: How do I add a new mailbox on my iPhone? 

  • How do I add a new worksheet to an excell file utilizing a template with the report generation toolkit?

    Hello,
    My vi is gathering data from a piece of machinery. At varrious points durring the process, my vi must create printable reports. I am using the report generation tool kit to do this. What I want to do is for every report generated durring the run, add it as a new worksheet in an Excell workbook. My excell template works fine for the initial master report and I can add new data to new worksheets. What I am having a problem figuring out is how do I add the new data to a new worksheet using an excel template? I have 5 different reports that need to be generated at different times with some more often than others. I would like all these reports to be in the
    same master excel file. Thanks in advance
    -Greg
    Gregory Osenbach, CLA
    Fluke

    Hi Greg,
    There is no built-in support in LabVIEW to add a new worksheet to an existing Excel report simply because this functionality does not exist in the Excel application itself.
    My suggestion would be to open up the template you wish to use for the new worksheet. Copy the cells from the template and paste them into your new worksheet that you've created. Then close the original template and you have another copy of the template in which you can populate with data values.
    I have attached an example program of how to Copy and Paste a Cell in Microsoft 97 Using ActiveX in LabVIEW to this post. Hope this helps!
    Kileen C.
    Applications Engineer
    National Instruments
    Attachments:
    XL_cell_copy_and_paste.llb ‏76 KB

Maybe you are looking for