How could I find out which user did release a transport request in the sour

How could I find out which user did release a transport request in the source system

Hi Tina,
Use SE10 t-code and type abaper user name in the user field then check released check box then display and select request number which is released, double click on said request number and click on "object list of request" Then click on "comment: released" than you can find out the released user name at the end of request number along with dated of released.
I hope you problem will be solved.
Regards,
Anil

Similar Messages

  • How can I find out which Apple ID's I've used in the past?

    I'm trying to update the software on my iPad Air and my ID has been rejected 8 times. This ID works on the App Store, iTunes, iCloud, and any other place it's needed. When I bought this unit in January I was using a different ID as was the case when I last updated the software. I have no record of previous ID's I've used. Any ideas how I can find out? Apple obviously has the info!  

    Start here:
    https://iforgot.apple.com

  • My server is sending SPAM - how do I find out which user(s) are sending it?

    I just received a notice from my ISP that some SPAM was sent by my email server. He included samples of the spam. Unfortunately I can't find any info in the spam to tie it to an IP number that would help me find if one of my users is infected.
    I think I have the SMTP set so that it can only be used with authentication. We have had this set up for some time now (over two years at least) and this is our first instance.
    I'm concerned that one of my users on a PC is infected and using their smtp authentication to send this stuff.
    Any advice on where to go from here?
    I have included the results of postconf -n to see if I have any configuration problems.
    Thanks.
    alias_maps = hash:/etc/aliases
    command_directory = /usr/sbin
    config_directory = /etc/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    debugpeerlevel = 2
    enableserveroptions = yes
    inet_interfaces = all
    mail_owner = postfix
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    mapsrbldomains =
    messagesizelimit = 15728640
    mydestination = $myhostname,localhost.$mydomain,localhost,zeryn.com
    mydomain = zeryn.com
    mydomain_fallback = localhost
    myhostname = mail.zeryn.com
    mynetworks = 127.0.0.1/32,65.39.65.22
    mynetworks_style = host
    newaliases_path = /usr/bin/newaliases
    ownerrequestspecial = no
    queue_directory = /private/var/spool/postfix
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = postdrop
    smtpdclientrestrictions = permit_mynetworks rejectrblclient sbl-xbl.spamhaus.org permit
    smtpdpw_server_securityoptions = login,cram-md5,plain
    smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
    smtpdsasl_authenable = yes
    smtpduse_pwserver = yes
    unknownlocal_recipient_rejectcode = 550
    virtualaliasmaps = hash:/etc/postfix/virtual
    virtualmailboxdomains = hash:/etc/postfix/virtual_domains
    virtual_transport = lmtp:unix:/var/imap/socket/lmtp
    xserve Mac OS X (10.4.9)

    A list of the emails was sent to me, but I'm not sure there is enough header info in them to tell me what I want. However, I searched the log for the "from email" and found some at about the same time in the log. Here is the header and the parts of the log dealing with this email address:
    Email header? -------------
    From: "alisander gianni" <[email protected]>
    To: <Undisclosed Recipients>
    Subject: RE: Get the size that kills with enlargement pills. Try Advanced Gain Pro ***** Enlargement Pills.
    Date: Sun, 6 May 2007 07:43:43 -0700
    Message-ID: <357701c78fec$f1ee7960$0801010a@lye>
    MIME-Version: 1.0
    Content-Type: text/plain;
    charset="koi8-r"
    Content-Transfer-Encoding: 7bit
    X-Mailer: Microsoft Outlook Express 6.00.2900.2527
    Thread-Index: AceP7S2xF77i9UyvRp6aehJVe3GLbg==
    X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3028
    X-Sieve: CMU Sieve 2.2
    X-AOL-IP: 65.39.65.21 (<-- this is my server ip)
    SMTP log entries ------------
    May 6 07:44:49 zeryn postfix/smtpd[2846]: warning: 60.48.247.22: hostname tm.net.my verification failed: Host not found
    May 6 07:44:49 zeryn postfix/smtpd[2846]: connect from unknown[60.48.247.22]
    May 6 07:44:50 zeryn postfix/smtpd[2846]: 0621623D6EDE: client=unknown[60.48.247.22]
    May 6 07:44:50 zeryn postfix/cleanup[2850]: 0621623D6EDE: message-id=<357701c78fec$f1ee7960$0801010a@lye>
    May 6 07:44:50 zeryn postfix/qmgr[118]: 0621623D6EDE: from=<[email protected]>, size=1847, nrcpt=1 (queue active)
    May 6 07:44:50 zeryn postfix/smtpd[2853]: connect from localhost[127.0.0.1]
    May 6 07:44:50 zeryn postfix/smtpd[2853]: EC70A23D6EE1: client=localhost[127.0.0.1]
    May 6 07:44:50 zeryn postfix/cleanup[2850]: EC70A23D6EE1: message-id=<357701c78fec$f1ee7960$0801010a@lye>
    May 6 07:44:50 zeryn postfix/qmgr[118]: EC70A23D6EE1: from=<[email protected]>, size=2231, nrcpt=1 (queue active)
    May 6 07:44:50 zeryn postfix/smtpd[2853]: disconnect from localhost[127.0.0.1]
    May 6 07:44:51 zeryn postfix/smtp[2851]: 0621623D6EDE: to=<[email protected]>, relay=127.0.0.1[127.0.0.1], delay=2, status=sent (250 2.6.0 Ok, id=02590-09, from MTA: 250 Ok: queued as EC70A23D6EE1)
    May 6 07:44:51 zeryn postfix/qmgr[118]: 0621623D6EDE: removed
    May 6 07:44:51 zeryn postfix/pickup[2343]: 2501123D6EE5: uid=77 from=<[email protected]>
    May 6 07:44:51 zeryn postfix/lmtp[2854]: EC70A23D6EE1: to=<[email protected]>, relay=/var/imap/socket/lmtp[/var/imap/socket/lmtp], delay=1, status=sent (250 2.1.5 Ok)
    May 6 07:44:51 zeryn postfix/qmgr[118]: EC70A23D6EE1: removed
    May 6 07:44:51 zeryn postfix/cleanup[2850]: 2501123D6EE5: message-id=<357701c78fec$f1ee7960$0801010a@lye>
    May 6 07:44:51 zeryn postfix/qmgr[118]: 2501123D6EE5: from=<[email protected]>, size=2510, nrcpt=1 (queue active)
    May 6 07:44:51 zeryn postfix/smtpd[2846]: disconnect from unknown[60.48.247.22]
    May 6 07:44:51 zeryn postfix/smtpd[2853]: connect from localhost[127.0.0.1]
    May 6 07:44:51 zeryn postfix/smtpd[2853]: 3949F23D6EE8: client=localhost[127.0.0.1]
    May 6 07:44:51 zeryn postfix/cleanup[2850]: 3949F23D6EE8: message-id=<357701c78fec$f1ee7960$0801010a@lye>
    May 6 07:44:51 zeryn postfix/qmgr[118]: 3949F23D6EE8: from=<[email protected]>, size=2874, nrcpt=1 (queue active)
    May 6 07:44:51 zeryn postfix/smtpd[2853]: disconnect from localhost[127.0.0.1]
    I'm not sure how to read the log file. Is there something here out of the ordinary? Does the server consider these valid users/email?

  • How to find out which user has the permission to execute startsap ?

    Hi All
    How do I find out which user has the permission to execute the startsap and stopsap? Do I control the permission on those script using windows standard authorization? For example: only allow certain user have the read and write permission?
    Thank you.!
    Vincent Lo

    Well to me this is really weird question..
    <b>noone un-authorized should have access to OS on your system</b>
    If this is valid you do not need to solve problems who can and who cannot start/stop SAP, because if you want to prevent some users from shutting down the SAP you have really hard job to do - there are many ways how to kill the SAP (for example killing relevant process from task manager, killing of database, messing with services etc.) - yes, this is harmful way of stopping SAP, but we are talking about attack, right? I would contact some Windows specialist to help you disable all the ways how to harm the running SAP. But still after that - there are many files that can be modified/deleted so SAP will crash after restart - you need to protect them too, etc.
    In case you take the first assumption as granted (and you really limit access to this server) you do not need to worry who can stop or start SAP - at the other hand it may be handy to be able to start/stop SAP from other users - for this you can run the stop/start script "under different user".
    But to answer the question - to me this is question just of access control (but really never tried that myself):
    <a href="http://technet2.microsoft.com/WindowsServer/en/library/c6413717-511e-42bd-bd81-82431afe4b2a1033.mspx">Permit or restrict access to a snap-in for a domain</a> (or see other related links down there on this page)
    Please award points for useful answers.
    Thanks

  • I share an itunes account with 3 users. How can I find out which person downloaded a certain app?

    I share an itunes account with 3 users. How can I find out which person downloaded a certain app?

    Agile,
    Any of the above will work, depending how you would like to set it up.
    Given that kids tend to eventually grow up and be independent, the best long term answer for most people is to let her have her own account and her own library as soon as she can handle it.  Keep in mind that content purchased from the iTunes Store is permanently tied to the account from which it was originally purchased, so separating later is a challenge.
    If you want to sync multiple devices to the same library, that will work.  Or if you want separate libraries (as I would recommend), they can be either on separate computers or on separate Windows user accounts on the same PC.
    For the name change:  Connect the device.  When the name appears in the left sidebar of iTunes, highlight it and change it.

  • How to find out which user create folder

    how to find out which user create folder in shared drive?

    Hello,
    you have to enable Auditing in on the DCs OU and also on the top folder level where this should be monitored.
    http://technet.microsoft.com/en-us/library/cc784387(v=ws.10).aspx
    http://support.microsoft.com/kb/310399
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://msmvps.com/blogs/mweber/
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

  • How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?

    Hi there,
    How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
    Thanks.

    You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
    Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
    Here is one more resource :
    https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
    Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
    real time and provides the captured data at granular level.

  • How find out which user is using which company code?

    Hi Gurus,
    I am having more than 500 users in Production System.I need to find out which user is using which company code?I can get the roles and users separately from two different SAP tables.
    Is it possible to get it from a single table or Tcode?
    Best Regards,
    Rahman

    Hi,
    Thanks for the update.Yes I tried with SUIM.But I was unable to find any clue.
    Regards,
    Rahman

  • How can I find out which portal users are logged in portal?

    Hi
    I need to know where can i find information about which portal
    users are currently logged in to portal. Are there any api or
    built-in functions which will help me find out this information?
    Thank you for your immediate help!!

    I too would like to find out which users are loggeg on. We need
    to restrict users to one login or session if possible.
    Thanks,
    Tom Henricksen

  • How do I find out which "page" the user was on

    I am using JAVA servlets and XSLT's to create a web service. I need to know how I can use the HTTPRequest that is sent to me to the server to find out, which "page" they were on when they clicked the login link.
    The login link appears on all "pages" and once they click it a loginServlet is activated an a login page is shown. I need to know which "page" they were on so I can take them back to it after login has completed.
    So take for example I am at http://localhost:8080/contact/ and then they clicked a hyperlink with value http://localhost:8080/login to call loginServlet. I know getPathInfo will give me the "/login" but how do i get that "/contact" so i can send them back to that page once the system has logged them in.
    Any help, suggestions, comments would be highly appreciated it. Thanks.

    Retrieve the "Referer" value from the requestHeader:
    String referer = request.getHeader("Referer");Notice the misspelling, you must spell it this way. BTW, check for nulls. I don't think there's any guarantee this value is set, although I've never run across a situation where it wasn't.

  • How do I find out which tab was pressed?

    Our site is using tabs. We have few portlets in different tabs whose custom rendering depends on which tab the user has clicked.
    Programmatically, how do we find out which tab was pressed?
    We're using portal 9.0.4. Thanks for your help.
    Ashraf

    Thanks Sanjay for your quick reply!
    Option 2 looks like a potential solution. Not quite elegant as you indicated, but will work.
    I recall reading somewhere, before the release of 9.0.2.6, that in upcoming version 9.0.2.6/9.0.4 you should be able to programmatically determine the last tab clicked. If you could kindly confirm whether no such built-in mechanism (API, etc.) exist to find out last tab clicked in portal version 9.0.4? We're looking to implement this feature in database provider environment.
    Thanks again for your help.
    Ashraf

  • I want to update my phone, but i purchased many apps and music on the phone. it won't let me authorize my computer so i cannot update. i don't want to deauthorize all my computers. how can i find out which 5 computers i have authorized?

    i want to update my phone, but i purchased many apps and music on the phone. it won't let me authorize my computer so i cannot update. i don't want to deauthorize all my computers. how can i find out which 5 computers i have authorized? also how can i update the software?

    This is a tedious solution, which is stupid!  And some users report an inability to reauthorize a computer after an "en masse” deauthorization.  I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
    And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge!

  • How can I find out which iTunes library my computer is using?

    I have a desktop Mac Mini at home that my wife uses and a MacBook Pro that I use at home and in the office.  I wanted to be able to access all the music we have on both machines from both machines, even when I am out and about and have no network connection for my MacBook Pro. So, I uploaded all the music we had on iTunes to Dropbox, and this now syncs on both computers.  So, whenever either of us adds music to iTunes, the songs are saved on both machines within the Music folder in Dropbox, which syncs in real time across both computers.  So far so good.
    However, what I am finding is that, when either of us adds new music to our respective iTunes, it only shows on the computer on which it's been added.  So, within a matter of weeks, our computers no longer show the same music in our respective iTunes windows, even though the music is present on both machines in the synchronised Dropbox folder.
    I realised that the computers must start using different iTunes library to each other when new songs are added to either machine.  So, I figured that, when we add music to one of the computers, if I pointed iTunes on the computer that has the less up-to-date music to the latest library that is being used by the computer with the more up-to-date music, this would ensure that both machines showed the same music in their repective iTunes windows.  The problem is that I cannot work out which iTunes library is being used by the computer with the more up-to-date music on it.  I know how to choose a different library when I open iTunes (hold down alt) but that doesn't help, because I all I want to do is to FIND OUT WHICH LIBRARY IS BEING USED BY ITUNES ON THE COMPUTER WITH THE MORE UP-TO-DATE MUSIC.  I simply can't find a way of getting iTunes to show me which library it is using, although this must be the simplest thing in the world. An additional issue is that I want to playlists we have created to appear on both machines - will that be the case if I point the less up-to-date iTunes (on my wife's Mac Mini) to the library of the more up-to-date iTunes (on my MacBook Pro), since my computer with the more up-to-date iTunes shows all the playlists, whereas my wife's doesn't?
    So, can anyone help?  Plus if anyone knows of any software that can automatically ensure that two different Macs both use the same and most up-to-date iTunes library and therefore always show the lastest music collection, whichever machine the music has been added to, that would be fantastic.  Thanks.

    You could have all the computers point to the same library but it can't be opened by more than one at any time.
    No answer for knowing which library is in use other than selecting it at startup.  This question gets asked here occasionally but I don't think it is a high-demand feature since most people have just one library.  I guess you could put in an empty playlist with the library name so you have an identifier.

  • HT1338 HOW CAN I FIND OUT WHICH SERVER MY MAC IS USING?

    HOW CAN I FIND OUT WHICH SERVER MY MAC IS USING, KEEP GETTING MICROSOFT SQL SERVER ERRORS
    WHEN TYPING IN ADDRESS'S?

    If your computer is tied to a network, then there is a way to check. Go to System Preferences, and click Accounts. unlock Admin
    then you can click Login Options.
    under that, Network Account Server. This should show you what server your computer is tied to. If you aren't in the tech department, you could try asking them.

  • My Library has ten more songs than my iPod. How can I find out which songs are not syncing?

    My Library has ten more songs than my iPod. How can I find out which songs are not syncing?
    I recently had to purchase a new hard drive. Because the size of my music collection exceeds 140 GB, I stored all of my music on a separate external hard drive. When I exported everything back into my new iTunes library, I found that I had about 200 more songs than I had in the previous library. After deleting most of those extraneous songs, I was able to get my library close to where it was before. However, after syncing to my iPod Classic, I noticed that only 34,853 of the 34,863 loaded. How can I figure out which of those ten songs in my library did not sync to my iPod?
    Yellow12

    It may be that the 10 songs are unchecked. To find them select songs view.
    If there is a column Heading marked with a tick then click on it to sort by this column.
    If the Column is not there then View > View Options and select the Checked column which will then display
    Check the songs by putting ticks in the empty boxes and resynch. Now those tracks should go over as well

Maybe you are looking for