How could we assign customized function module to the object

Hi Experts,
How could we assign z made function module to the object type.
for instance, i have prepared one z function module and want to assign segment builder.
Please help in this regard
Thanks
Mahesh Babu

Hi Thiru,
Standard Transaction Codes, have their own Function Modules for generating Outbound/Indbound Idocs. Where these Function Modules will be configured to a particular Process Codes.
For E.g for PO's
Process code : ME10 - IDOC_OUTPUT_ORDERS - for creation
In case if its a Z Function Module, It depends on the case how you use IDOC types. either directly through Z Program or through Inbound/Outbound Process codes with respective Function modules.
Regards,
Anbalagan

Similar Messages

How to create a custom function module with the records in SAP R/3?

Hi All,
How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
Regards
Sara

Hi
goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
Look at the below SAP HELP links, These links will show you the way to create a Function Module
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

How to connect our outbound function module to the message type

how to connect our outbound function module to the message type any transcation code exits to assign the message type with the function module .
Thank in advance .
A. Thiru

Hi Thiru,
Standard Transaction Codes, have their own Function Modules for generating Outbound/Indbound Idocs. Where these Function Modules will be configured to a particular Process Codes.
For E.g for PO's
Process code : ME10 - IDOC_OUTPUT_ORDERS - for creation
In case if its a Z Function Module, It depends on the case how you use IDOC types. either directly through Z Program or through Inbound/Outbound Process codes with respective Function modules.
Regards,
Anbalagan

How to trigger inbound custom function module?

Hello Experts,
Could someone help me with my dilemma?
I have created a custom process code which is linked to a custom function module for processing inbound IDocs. I have tested the function module successfully and I have set up the partner profile accordingly. The IDocs are coming in but get stuck at status "64". My function module never gets triggered even though in the partner profile it is set up to be triggered immediately. Any idea what I am missing?
Thanks,
Marlin

Hi marlin ,
just go for these checks and let us know the status ..
1.Check here .
Bd51 assignment of Inbound function module. Present or not
Check here .
2.Bd67 assignment of process code to inbound function module /present or not.
3.
Check here.
In the object for the message type u need to give the BUS object as the application object.
like bus2032
4.
Now place a break-point in ur function module and run it in debugging mode ..
Now check whether this one is getting into ur function module , next check the status record of the document number .
regards,
vijay.
take an idoc , populate it from we19 and then there call the function module in debugging mode in back ground ..
we'll see if this is actually picking the Fm or not.
Message was edited by: Vijay

How do I 'assign a higher layer to the object on the master' (page numbers on master) I understand the layer needs to be at the top to show above placed images on pages but how do I do this?

I've added the page numbers to my master pages. They are displaying on the pages but I have images on the individual pages that are covering the numbers. I understand I need to assign a higher layer to the object but I don't understand how to do that. Please help me? Please explain a simply clearly as possible, I've read other answers but still don't understand. Wish it was as simple as select object, right click, edit layer!
Many thanks!

Layers panel;
Create new layer
Switch to Master page
Make sure new layer is on top in the Layers panel, if not drag the layer on top in the Layers panel.
Select (click once on) that top layer (pen symbol appears behind that layer in the Layer panel)
Now draw your page numbers etc on the Mastet page
From now on, select (click once on) any Layer in the Layers panel that is below the layer you used on your Master page items and create new objects in your document pages.
If you accidently created objects on a 'wrong' layer:
Select those objects
You will see a square behind the layers name in the Layers panel
Click and hold the mouse on that square and drag it behind the name of the layer you want to move the objects to.
Buy a book about InDesign and start learning these basic principles!

Custom Function Module for the New Process Codes

I want to distribute the custom table data . For that i have written the program using MASTER_IDOC_DISTRIBUTE. I have created the custom message & idoc types along with their assignments.
I got struck up at the process code. I have to assign the function module for that process code. Can anyone kindly help me in writting the code at that function module ?

Hi Friends,
My requirement is , i need to transfer the table records. For that i have created the Message/Idoc Types and also created the Partner profile and the Distribution model view .....all alll i have done.
My doubt is , in the we20, at the outbound parameters , i can give the Message/Idoc types that i have created. Ok thats fine
But at the inbound parameters, i have to give the inbound process code. So i have created the Inbound process code. As we know that for every process code a function module is attached, now i have to create the function module which posts the records in receiver side.
so 1. Does the Function module need to be RFC Enabled ?
2. Do we need to create Object type in SWO1 once i
create and release the function module ?

How to create a Z Function module for the standard FM VIEW_KURGV?

Hi all,
There is a requirement to the change the functionality of the standard FM VIEW_KURGV. This FM is being used in a Z report. Hence, I have a copied this FM to a Z FM ZVIEW_KURGV after having created the Z Function Group ZV05E. However, there are a number of standard routines which are present in the standard FM VIEW_KURGV which need to be also created in the Z FM ZVIEW_KURGV. Please advise how to proceed.
Thanks and regards,
Anishur

Instead of copyg the std fm to z, do the following,
1. Go to se37 open FM VIEW_KURGV in display mode.
2. Click on the spiral icon on the top.
3. Then in menu go edit->enhancment options -> show implicit enhancement
4. """""""""""""""""""""" kind of lines will appear in the cde, just rt click on the line at the place u want to insert the code and select
enhancement implementation create.
5. Give apropriate name for thi , it will inset a n place to write your code.
This is an std sap methodology and is supported in upgradde also.

How to bring the custom function module in WE42?

Hi,
I have created a custom function module to post a custom idoc.
Process code has been created thro WE42 and WE57 is done.
Still I am not able to see the custom function module in the list (WE42) in order to assign it to process code.
May i know the reason for this?
Thanks.
Thiyagu

What makes you think that it should be visible in WE42? There is no F4-value help for this and you haven't added it manually yet, right.
In WE42 you can manually add entries, so that's what I would do.

How to add a created Z function module to the existing list in WE21

Hi all,
There is some existing function modules ( like EDI_PATH_CREATE_CLIENT_DOCNUM ) in WE21 in the function module field.
here, i need to create one Z function module as per user requirement & want to add to that list. is it possible???
actually, i want the file name format is like
" Document Number_YYYYMMDDHHMMSS.xml ". but existing function modules are not giving this format.do anybody give any idea.
correct answers will be rewarded.
Thanks & Regards

HI Pabitra,
Yes, can always change the existing fm and add it with message type as follows pls note step 7 and step 8. (for inbound it is we42 and for outbound it is we41 )
Basic IDOCs have supplied by SAP with standard structure. (Segments). You can extend them with your own segments.
IDOCs does have unique number. They contain control, data, and status records.
Useful Transaction Codes:
WEDI : IDoc Menu
WE02 : IDoc List (can enter IDoc number to select on)
WE05 : IDoc List
WE19 : Transaction WE19 can be used to test the IDoc
WE30 : IDoc Type Development: Initial Screen
WE31: Development Segments: Initial Screen
WE60 : Documentation for IDoc Types. This allows you to view the IDoc you have created.
WE81 : Display View EDI: Logical Message Types: Overview
WE82: Display View Message Types and Assignment to IDoc Types: Overview
WE21 - Creation of POrt
WE20 - Partner Profile creation
SALE - ALE (Application Linking and Enabling) settings
For Outbound ALE Configurations: (Example)
IDoc definitions and necessary ALE configurations settings for the outbound .
Create Idoc segments Transaction WE31.
Create Idoc type Transaction WE30.
Create Message Type Transaction WE81.
Assign Message Type to Idoc type Transaction WE82.
Create a distribution Model - Transaction BD64
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
for creating a IDOC
see the below steps for outbound processing IDOCS..
2.1 Outbound Interface
PROCESS DIAGRAM
Outbound Interface
1. Analyse Hierarchy Levels
2. Create New segment
3. Create New IDoc Type
4. Create New Message Type
5. Link Message with IDoc Type
6. Create an entry in EDP13 via transactions WE20 and BD64
7. Populate the Custom IDoc via ABAP Program
7b Error Handling
7c. Send Status Email
8. Test the Population of the Custom IDoc
Step 1 Analyse Hierarchy Levels:
Analyse the data relationships being processed in the interface. Define the appropriate hierarchical Parent-to-Child relationships.
Navigate to transaction code WEDI
Transaction WEDI displays the IDOC main menu. This allows navigation around the various development and control areas to create a customised IDOC.
Step 2 Create a new segment:
via wedi : Development - IDOC Segments or Transaction code WE31.
Enter segment name and click on Create.
The? name of the segment type must start with Z1 , and have a maximum of eight characters.
Enter description and enter the relevant field names and data elements.
The segment should represent a structure in the program so for? each field in the segment a field name and a data element must be defined.
Save the segment and enter Person Responsible and Processing Person .
Go to Edit and Set Release.
Repeat this procedure for each new Segment in the IDOC.
Step 3 Create a new IDOC Type
via wedi Development - IDOC Types or Transaction WE30.
Enter segment name (starting with Z), click on Basic Type and then Create.
Create as new, enter Person Responsible and Processing Person and enter description.
On Create Basic Type screen decide where segments should be inserted and go to Edit/Create Segment.
Complete relevant fields in the Maintain Attributes screen:
From the relevant segments created in Step 2 enter the Segment type and if mandatory segment.
The Minimum and Maximum number of segments to be allowed in the sequence. (One minimum and one maximum if segment is mandatory).
The Parent Segment and Hierarchy Level will be automatically created depending on where in the IDOC tree you decided to create that particular segment.
Repeat this process for each segment needed in the IDOC type, deciding whether to add the next segments at the same level or as a Child.
When IDOC created return to initial screen. Go to Edit and Set Release.
Go to Transaction WE60 to view the IDoc Type you have created.
Step 4 Create new Message Type
via wedi Development - Message Types or Transaction WE81.
Display/Change and click on New Entries
Create a new Message Type and Save.
Step 5 Link Message Type to IDOC Type
via wedi Development - IDOC Type/Message or Transaction WE82.
Display/Change and then click on New Entries.
Enter Message Type, Basic Type (IDOC Type) and Release (46C) and Save.
Step 6 Create an entry in EDP13 via transactions WE20 and BD64.
The partner profile for the Idoc must be set up and generated in the transaction BD64 and transaction WE20.
WE20 Add Message Type to appropriate Partner Type, Enter Message Type, Receiver Port and Idoc Type and Save.
BD64 Create a Model View, Enter Sender and Receiver Ports, Attach Message Type. Go to Environment on Menu and click on Generate Partner Profiles and generate (not save) profile.
Step 7 Populate the custom IDOC via ABAP Program
See Test Program ZOUTBD_IDOC_TEMPLATE, Appendix IV.
Create an Internal Table for each segment type, this should be exactly the same structure as the segment type.
The control record is filled into a structure like EDIDC. The message type and the Idoc type for the Idoc must be populated into the eddic structure.
- PERFORM populate_Control_structure USING c_mestyp
c_SEGMENT_type1.
The data segments are filled into a structure like edidd-sdata; sdata and the segment name are populated into the edidd structure.
- PERFORM transfer_Parent_data_to_seg.
The standard SAP function module MASTER_IDOC_DISTRIBUTE is called to pass the populated IDOC to the ALE Layer.
- PERFORM master_idoc_distribute.
NOTE: This function module is only called for stand alone programs and Shared Master Data programs (SMD). It is not called when using extensions or output determination.
The ALE Layer handles the sending of the IDOC to the receiving system.
Error Handling (see Step 7b).
Commit work.
Project SpecificStep 7b Error Handling
Analyse which fields in the interface are mandatory for the receiving system and who needs to receive error notification.
Declare a structure of type MCMAILOBJ for sending instructions.
Enter values for the internal table based on structure MCMAILOBJ
For selection processes, on SY-SUBRC checks and where fields are mandatory for the receiving system; insert Function Module MC_SEND_MAIL.
Enter values in the following parameters: -
MS_MAIL_SENDMODE = B (Batch Mode)
MS_MAIL_TITLE = 'Mail Title'
MS_MAIL_DESCRIPTION = Error description (e.g. MATNR not given)
MS_MAIL_RECEIVER = Name of Receiver (To be determined)
MS_MAIL_EXPRESS = E (Express Delivery)
MS_MAIL_DLINAME = Leave Blank
MS_MAIL_LANGU = 'E' (Language)
MS_MAIL_FUNKOBJ_NAME = Leave Blank
TABLES
MS_MAIL_CONT = I_MCMAILOBJ
Note:
It has to be determined separately for each interface how these errors and mail notifications are to be grouped dependant upon the number of errors that are potentially likely. One possible approach is to send an email for each reason for rejection and include all the records that failed for that reason in the mail notification. Another possible approach is to send an email for every failure.
When error checking for mandatory fields it is common SAP practice to reject a record on its first failure (irrespective of subsequent errors in that record)
<b>Step 7
(Transaction WE57)
Assign the custom function module to the IDoc type and the message type.
Set function module to type F and direction 2 for inbound.
Step 8
(Transaction WE42)
Create a new process code and assign it to the function module. The process code determines how the incoming IDoc is to be processed in SAP.</b>
Step 9
(Transaction BD67)
Assign the function module to the process code created above. Got to New Entries and enter the process code and the function module name.
Step 10
(Transaction WE20 and Transaction BD64)
Create a partner profile for your message and ensure that in transaction WE20 the process code is the one that points to your function module. (See step 6 of creating Outbound Idocs).
Step 11
Ensure that error handling functionality is present.
If u still have doubt, i can send u the print screen doc - hope this helps u
<b>Reward pts if found usefull :)</b>
regards
Sathish

How can i use reuse_alv_fieldcatalog_merge function module

I am using below steps for populating the final internal table.How can I use reuse_alv_fieldcatalog_merge function module in the place of declaring all these fields.How canI put title of the report in reuse_alv_fieldcatalog_merge function module.
FORM BUILD_FIELDCATALOG .
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'KUNNR'.
FIELDCAT-SELTEXT_M = 'Customer Name'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VBELN'.
FIELDCAT-SELTEXT_M = 'Invoice Reference'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKBUR'.
FIELDCAT-SELTEXT_M = 'Sales Office'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKGRP'.
FIELDCAT-SELTEXT_M = 'Sales Person'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'POSNR'.
FIELDCAT-SELTEXT_M = 'Item No'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FIANL'.
FIELDCAT-FIELDNAME = 'ARKTX'.
FIELDCAT-SELTEXT_M = 'Item Description'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.

Hello,
It is very easy to use reuse_alv_fieldcatalog_merge.
You try this it will work.
example
data:
DATA : gv_repid        TYPE syrepid VALUE sy-repid . " Report id
PERFORM set_field_catalog USING gst_struct CHANGING lst_fieldcat.
FORM set_field_catalog USING uv_tab TYPE slis_tabname
                     CHANGING xt_fieldcatalog TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = gv_repid
      i_internal_tabname     = uv_tab
      i_inclname             = gv_repid
    CHANGING
      ct_fieldcat            = xt_fieldcatalog
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " set_field_catalog_spec

Error in Custom Function Module

Hi,
I am working on implementing General Ledger Business content in financial Accounting.
We had a requirement of creating a Custom Virtual cube similar to 0FIGL_V10. Hence, we had copied the standard function module RS_BCT_FIGL_DATA_GET_VC10 and created a custom function module. Before doing that, we had copied the function group RS_BCT_FIGL and created a custom function group for the custom function module.Both were activated subsequently. Then, we had created a custom virtual cube (ZFIGL_V10) using the custom function module.
The queries on the Standard virtual cube were migrated to ZFIGL_V10 using the RSZC transaction code. when the queries are executed in RSRT, we get an error message "**An exception with the type CX_SY_DYN_CALL_ILLEGAL_FUNC occurred" and the ABAP debugger is started post that error.
Has anyone faced this problem before?could any of you provide some pointers to it.
Regards,
Sainath

You cannot use the standard function module which is used for standard cube for another cube.
You should not change the function module.
Instead you can make a copy of the function module you are using aand use this copy in ur virtual cube which will work in the same way the actual Fm used to work and it will make you perfrom the changes.
Follow the below steps:
1) Goto SE37 and In the top tool bar click on the copy button which is on right side of delete button.
2) in fr FM give the name of the actual FM and in to Fm give the name of the function module you want to copy.
3) Then click on copy.
4) Now open this new function in edit mode and goto the import/export parameters and check. it will have all the same parameters as the actual FM. Here you can make the changes you want.
5) Now use this FM in your virtual cube and it will be working as per your requirement
https://forums.sdn.sap.com/click.jspa?searchID=9605118&messageID=4999763
Hope it Helps
Chetan
@CP..

Run time error due to custom function module in a program

Hi,
I have created one program using custom function module ZIN_COMEV_CUSTDETAILNOTIF_OUT .The program is showing runtime error
"Incorrect parameter with CALL FUNCTION."
I have tested the FM using same set of parameter as in program it is working.It is throwing error while executing in program help.
Regards
Datta

Hello Nagraj or harish
I think you may be right.There is date field in my function module ,when I am testing function module I am giving it as
Y_DATE = 01.01.2011,but in program the field is DATS type and I have to give 20110101.If this is the problem how I can solve it.
CALL FUNCTION 'ZIN_COMEV_CUSTDETAILNOTIF_OUT'
EXPORTING
    Y_SENDER              = gv_g_sender
    Y_RECEIVER            = gv_g_reciever
    Y_PARTNER             = GV_V_PARTNER
    Y_BASIC_PROCESS       = GC_BASIC_PROCESS
Y_SWITCHNUM           =
Y_SEN_LOAD            =
    Y_INTUI               = GV_V_INTUI
Y_TRANSACTIONID       =
    Y_DATE                = GV_V_DATE

How to develope custom function modules in SAP R/3 system to maintain c...

How to develope custom function modules in SAP R/3 system to maintain cross
referencing tables for sales order number.

Hi Raja,
Steps to crate FM..
Follow these steps..
Go to the T: code SE37
First You Create Function Group
On That u specify
Function Group Name..............
Short Text..............................
save...
Go to SE 37
Specify the Function Module Name: Eg: Z_Bapi_Materialmaster
Short Text.......
Save...
Next Go to Attributes..
Select Radio button : Remote enabled model
Go to Parameters..
Click Import...
Give Parameter Type Associate type S.t
next Click Export...
Give Parameter Type Associate type S.t
Next Click Tables Button..
Specify tables..
Next click source code button..
Write Source code here..
Eg : Select statements Etc..
Finally we should be select the Radio button Enable remorely
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=39728
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/bapi%2bstep%2bby%2bstep
Hope this information is useful to you..
Reward points if it is usefulll....
Thanks ,
Satya Kumar..

How to defined/change assigned MW function module in CRMSUBTAB-MOD_NAME

Hi,
I need to find the place, where I can configure the field values of MOD_NAME in CRMSUBTAB. I am unable to find anything in R3AS3 for "CPB_STOCK_INFO". There is a function module "CRS_CP_STOCK_EXTRACT" assigned via CRMSUBTAB, which I have to replace by my own function module.
The values are actually stored in ERP, but as I saw in Program SAPLSMOFCUST (Include LSMOFCUSTFOU), it gets written down by CRM. I don't know how to locate the transaction code, which is using this program otherwise I would have solved my issue :o)
Thanks for any help!
Regards,
Andreas

I just found the solution! It was just not so obviously as the default function was not displayed. I have opend R3AS3 in CRM, selected "CPB_STOCK_INFO", went to the detail screen in edit mode and opened the popup behind the button of object class. The popup offers you a empty field and allows you to overwrite the SAP default module in the ERP table.
Regards,
Andreas

How to write the custom Function Module to trigger the Alert.

Hi all,
I have developed a custom alert category in Tx - alrtcatdef. Now i want to trigger it from my custom function module. what should i do or what is the procedure to trigger the alert from my custom function module.
Arul Jothi

hi arul,
try this program.
RSALERTTEST.
check out this link...
<a href="/people/ginger.gatling/blog/2005/12/02/innovative-ways-to-use-alerts:///people/ginger.gatling/blog/2005/12/02/innovative-ways-to-use-alerts
regs,
jaga

How could we assign customized function module to the object

Similar Messages

Maybe you are looking for