How create a wsdl on document style?

hi everyone,
I am trying to do a wsdl on javacaps.
I did my wsdl and it work ok, but I want do it on document style not in RPC style?
How can I do it?
thanks

Hi,
I tried to expose JCD as a web service. In this case WSDL will be
created by JCAPS.
When i exposed JCD as web service a wsdl file was created with style
as "document".
Please let me know how you created wsdl file. Have you created using
Web Service Definiton in JCAPS. [I tried to create using
Web Service Definiton but i don't know how to create binding details].
Regards
Venkatesh.S

Similar Messages

ABAP WSDL: RPC & Document Style

The Abap WSDL Generated with RPC Style is working fine with SOAP tester. But the outgoing message in the TCPMonitor is not the same expected, when tried with XI Generated WSDL. This is a SOAP XI SOAP Scenario.
It shows difference in the name spaces
But When tried w, the ABAP WSDL is not working; but using the same created XI WSDL is working.
Can anyone tell me what is the reason?

No Replies??????

JAX-RPC Document style WS

Is it possible to create a JAX-RPC document style web service that
returns an array of bytes ?
I have problems, but with jdeveloper 10.1.3 ´s tools.
With Axis I have NO problems.
Does anybody know why?
Sincerely
Jon Kepa Gerrikagoitia

Hello Mr. Grall,
I´m using jDeveloper 10.1.3 preview version.
I use bottom-up design so I rely on jDeveloper to do all the "dirty" job.
If I create a class that returns an array I cant create a document/Literal WS because jDev shows an error.
But If I choose document/wrapped it works !
Do tou know the reason of this ?
Sincerely,
Jon Kepa Gerrikagoitia.

How to Create Abstract WSDL from Concrete WSD

Hello Everyone,
I want to create abstract wsdl from concrete wsdl and place that abstract wsdl in the MDS Location. Now, In the composite i would be configuring the reference section where for ui:wsdlLocation value, i need to give the path of abstract wsdl in mds location. binding.ws location would be the actual concrete wsdl...So basically, all iwant to achieve is lets say CompositeA is calling CompositeB. I want to create abstract WSDL for CompositeB and keep that Abstract WSDL in MDS location, and use that ABstract WSDL which is in MDS location while configuring the Web Service Adapter in Composite A.
can anyone help me on this ,
Thanks in advance

Here is my concrete WSDL...
<wsdl:definitions name="BPELProcess3" targetNamespace="http://xmlns.oracle.com/Test_jws/simpleResponse/BPELProcess3">
<wsdl:documentation>
<abstractWSDL>http://192.168.1.106:8001/soa-infra/services/Enterprise/simpleResponse!1.0/BPELProcess3.wsdl</abstractWSDL>
</wsdl:documentation>
<plnk:partnerLinkType name="BPELProcess3">
<plnk:role name="BPELProcess3Provider">
<plnk:portType name="client:BPELProcess3"/>
</plnk:role>
</plnk:partnerLinkType>
<wsdl:types>
<schema>
<import namespace="http://xmlns.oracle.com/Test_jws/simpleResponse/BPELProcess3" schemaLocation="http://192.168.1.106:8001/soa-infra/services/Enterprise/simpleResponse/bpelprocess3_client_ep?XSD=xsd/BPELProcess3.xsd"/>
</schema>
</wsdl:types>
<wsdl:message name="BPELProcess3RequestMessage">
<wsdl:part name="payload" element="client:process"/>
</wsdl:message>
<wsdl:message name="BPELProcess3ResponseMessage">
<wsdl:part name="payload" element="client:processResponse"/>
</wsdl:message>
<wsdl:portType name="BPELProcess3">
<wsdl:operation name="process">
<wsdl:input message="client:BPELProcess3RequestMessage"/>
<wsdl:output message="client:BPELProcess3ResponseMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="BPELProcess3Binding" type="client:BPELProcess3">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="process">
<soap:operation style="document" soapAction="process"/>
<wsdl:input>
<soap:body use="literal" namespace="http://xmlns.oracle.com/Test_jws/simpleResponse/BPELProcess3"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal" namespace="http://xmlns.oracle.com/Test_jws/simpleResponse/BPELProcess3"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="bpelprocess3_client_ep">
<wsdl:port name="BPELProcess3_pt" binding="client:BPELProcess3Binding">
<soap:address location="http://192.168.1.106:8001/soa-infra/services/Enterprise/simpleResponse/bpelprocess3_client_ep"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
So in order to create the abstract wsdl, i just need to remove the bindings tab from this one ? please let me on this,
Thanks.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

In pages, when a create a document, potions of it, say several pages will be clumped together and it effects me editing their order. It is like they are forever joined- How do I edit my document and print just one page or move just one page?

In pages, when a create a document, potions of it, say several pages will be clumped together and it effects me editing their order. It is like they are forever joined- How do I edit my document and print just one page or move just one page?

May you open your eyes before creating a new thread ?
Your question was already asked and answered today.
https://discussions.apple.com/thread/3177074?tstart=0
Yvan KOENIG (VALLAURIS, France) jeudi 14 juillet 2011 14:40:40
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How can I create a new Numbers Document through AppleScript?

How can I create a new Numbers Document through AppleScript?
I try this:
tell application "Numbers"
make new document with properties {template name:"blank"}
end tell
But don't work.
Where can I find documentation about it?
Thanks

If you try to invent your own syntax, you are starting on very wrong basis.
The required syntax is defined by the Numbers AppleScript's dictionary.
This one doesn't know what is a template.
This is why, in the link posted by badunit, I use an other scheme to create a new document.
I know that it's awful but it's the only one available at this time.
Yvan KOENIG (VALLAURIS, France) samedi 4 juin 2011 11:25:25
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How can you create a writable PDF document from a PPT presentation ?

How can you create a writable PDF document from a PPT presentation ? Upper part with the image , lower part with a free space in order to take notes for students during presentation or course.
Thanks.
B

You can make a PDF file out of you notes and handouts but using the Adobe PDF printer.
Open your PowerPoint Document then go to “File” “Print”
Select ‘Adobe PDF” Printer
Under slides, select which way you want to print. Note it will not print to a printer but to a PDF file.
After then go into printer Properties and Setup PDF properties, do the following: (see second image below)
Default: PDF/A 1-b
Adobe Security: none (change as needed)
Adobe Output folder: Prompt for Adobe file name
Adobe Page size: Letter (change as needed)
Check the following check boxes
View Adobe PDf Results,
Add Document Information,
Rely on system fonts only,
Delete Log files for successful jobs.
Select OK
A pop will ask you where you want to save the document. The file extension should be PDF. After giving the file name select okay and the file should popup as a PDF. Down side is if you want to speaker notes included then you will have to do another file, like wise with just screen shots then combine into one PDF document.
I used Acrobat IX Pro. So to do this you need Acrobat IX or X Pro.
Hope this will help.
Tiger26

I have file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Ac

I have pdf file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Acrobat X Pro and Windows -7 platform.

Yes, I just want to cover up all the pages for those particular area of document numbers.
Nothing sensitive about it. I just want to show the correct document numbers on all pages in print out.
So, I wanted to cover up by comments, but commenting on each page will be difficult. So, I wanted to comment the same on all pages.

How do I create a list of Document workspaces

Hello
I can't find anything on how to create a list of document workspaces in a webpart.
If I have a 100 workspaces I can't have the list sitting in the quick launch bar, so I thought that a web part would be the next best thing on a page.
Could anyone advise?
I'm not a programmer, just a power user.
Thank you.
Mel
Mel

I don't believe there is a way to do this OOB. You can either use SharePoint Designer/ custom code to achieve the same.
Also try the following code from CodePlex to display all sub webs, not sure if you can filter it to display only the Workspaces
http://sharepoint247.codeplex.com/
--Cheers

I created a 5x7 postcard document in Word with text boxes and graphics. When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document. What happened, and how do I fix

I created a 5x7 postcard document in Word with text boxes and graphics. When I converted it to PDF, some of the items were missing, even though they were in the boundaries of the page and looked fine on the Word document. What happened, and how do I fix it? I'm trying to upload the PDF version to Vistaprint. Thanks.

Reader doesn’t create pdf files. You can use Acrobat (ask in that forum) to create pdfs. You can subscribe to the Adobe PDF Pack which has a create pdf functionality (please ask in that forum), or you can use a third party utility such as ghostscript, cutepdf, or Microsoft’s own PDF creation capability. For third party pdf creation you will need to ask in a forum dedicated to that software as fellow users of Reader are unlikely to have the knowledge to help.

How create account document from Sales Document?

Hi.
I hope you are doing well. The scenario is:
1.- Create Lead (Sucessfully)
2.- Create Quotation wrt Lead ((Sucessfully)
3.- Create Sales Order wrt Quotation (Sucessfully), into status tab I have add Transferred to bill. document status
4.- The billing document was created sucessfully, however The account document doesn't exist.
How create account document?
Note:
assign revenue account was configurated into spro
What about BP , I guest , need to create a Billing organization.
Regards.

Resolved to doing transfer to billing action into status tab

How can I open a document created in Classic on MacOS X? When I tried to open it, it says Classic Not Supported. What do I do?

How can I open a document created in Classic on MacOS X? When I tried to open it, it says Classic Not Supported. What do I do?

The short answer is:
Single click on the document you created in Classic, bring up your 'popup' menu (right click or control-click), select 'Open With' and choose the Mac OS X application you believe will open the document.
If this does not work. Tell us which Classic application you created the document with and which applications you have which you believe will open your 'classic' document.

I downloaded adobe create a pdf- now how do I get a document to connect and be converted

I downloaded adobe create a pdf- now how do I get a document to connect and be converted

Hi powerequipsales,
Create PDF is an online service which you have subscribed.
Please use below link to access your Create PDF service.
https://cloud.acrobat.com/convertpdf
Login with your Adobe id and password associated with it.
Follow these steps to create a PDF file.
'Select Files To Convert To PDF' -> 'Choose Files From My Computer'.
Select the desire file you want to convert in a PDF and click 'Open'.
Regards,
Florence

How do I convert a document created in Pages to a pdf file?

How do I convert a document created in Pages to a pdf file?

The same way that you would do it for any application, print menu or export menu.

How create a wsdl on document style?

Similar Messages

Maybe you are looking for