How creates or modiyfiys the ivi.ini?

Hello
I am using serveral Ivi - Devices (ag3634a, ag3499 ,ag3220 ag53132) in a ATE system. The System is using TestStand 2.0.
I would like to use the IVI Step Tpyes for these devices.
But it failed with code -31617 (channel name not vaild)
After spending a hour in this great Forum, I found that i have to use the the channel names defined in ivi.ini.
But on the ATE - maschine there was not this file.
After copying the file from the my developer maschine to the ATE everything was working.
why was this file on my dev. maschine and not an the ATE maschine --> Both are using the same drivers
please tell me
How creates or modiyfiys the ivi.ini?
thanks
Juergen

Hello Juergen,
Ivi.ini depends on the version of IVI engine. This file is obsolet for last IVI engine (for version 2.0 and higher) and thay are using XML config store. The best way how you can configure and change your settings is MAX.
Specific cahnnels:
ag3634a has specific channel "1"
ag3499 depends on the module (see attached PDF file)
ag53132 has specific channels "1","2","3"
see attached screenshot. Remember that you must press save icon after all changes are done ;-)
Zdenek
Attachments:
virtual_channels.jpg ‏100 KB
doc.pdf ‏128 KB

Similar Messages

  • How the IVI New Session.vi works with the ivi.ini?

    Hi,all
    Does anyone know how the IVI New Session.vi works with the configuration file ivi.ini?
    And when the ivi application running, how the ivi calss driver refers to the right specific instrument drivers without changeing the program?
    Thanks,
    njzhw
    人的生命是有限的，但知识是无限的！
    南京众知维测试技术有限公司

    Which VI or function are you referring to? There is neither an "IVI New Session.vi", nor a corresponding "Ivi_NewSession" function in C.
    The Ivi Class Drivers determine which specific driver to use at run-time, by looking up the resource descriptor (a Logical Name, or Virtual Instrument) and determining the associated Instrument Driver. That configuration information is settable by the user through MAX (Measurement and Automation Explorer).
    --Bankim
    Bankim Tejani
    National Instruments

  • When creating SCCM boot.wim what modifies the winpeshl.ini file?

    I need to add a command to run before tsbootshell.exe in the winpeshl.ini. Other than cracking the boot wim and manually modifiying winpeshl.ini how can it get Configmgr to do this automaticlly? The post for putting it in the unattend does not work for me
    because tsbootshell.exe has already run at that point so the only place i can make this modification is in winpeshl.ini.
    Thanks,
    Uly

    I am in a similar situation and wanted to add a sleep.exe command to winpeshl.ini as mentioned in this thread:
    http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/a60feb9b-d968-4a2c-9449-773c61bcdf58/. The exact steps I used are listed there.
    I discovered that you can create a customized winpeshl.ini file in this location and it will be automatically be integrated into the final boot image when you use SCCM to update or create new boot images. I think you're trying to do exactly what I was trying
    to do and this should do the trick.
    [Program Files]\Microsoft Configuration Manager\OSD\bin\i386\winpeshl.ini

  • How to find out the user who has created  a new field in the custom table.

    How to find out the user details who has created  a new field in the custom table.
    Thanks,
    Joan

    Hi Jesudasan ,
    You can know the user details with version management.Please find the
    below procedure to know.
    Go to table->Utilities tab->version->Version management->Compare the previous one .
    Hope this solves the issue,Let me know if you have any issues.
    Thanks,
    Rajani

  • I have created a 468x60 animated banner in Edge Animate. How do I save the animated image to my desktop? (not in html code)

    I have created a 468x60 animated banner in Edge Animate. How do I save the animated image to my desktop? (not in html code)

    Hi,
    This feature is not available in Adobe Edge animate. You can not export as image from Edge animate.
    Publish options available in edge describe here
    Edge Animate Help | Publish your content
    Regards,
    Devendra

  • How do I use the same photo twice in a slideshow created in iPhoto'11?

    I created a slideshow in iPhoto'11 and would like to use the first slide also as the last slide.
    How can I use the same photo twice?

    Seems you have to duplicate the photo in your Library to add the same picture twice.

  • How do I get the albums created on my iPhone5 to show up on my Macbook Pro in iPhoto?

    Have an album I created on my iPhone5 that I want to be able to see all those photos on my MacBook Pro in iPhoto.  But when I have my iPhone connected (wirelessly) to iTunes, and iPhoto open, I can't for the life of me figure out how to seamlessly merge the iPhone album so I can have easy access in iPhoto.  I can't find photo stream anywhere in iPhoto (it's not showing up on the side menu bar, have already looked).  Any other suggestions?  I would think this should be an easy fix, but can't for the life of me figure it out.
    Thanks for the help

    How are you "creating the album" on the iPhone 5?
    As to PhotoStream that feature is not supported in OS X 10.6.8 - see this page for requirements - http://support.apple.com/kb/HT4486
    LN

  • Created site in iweb 08 and posted to netfirms... the pages are all loaded up but there is no nav bar, it comes up on each page as a small black dot. How do I get the nav bar to load up and show?

    I created site in iweb 08 and posted to netfirms... the pages are all loaded up but there is no nav bar, where the nav bar should be is only a small black dot on each page. How do I get the nav bar to load up and show? It was a disaster loading up my site as it changed the case of the letters and at first no pages were seen, so I had to go through and change the letters that were supposed to be cap, back to cap in every file. I don't know if this has something to do with it or not. The tech support doesn't have an answer. Please let me know if you have any ideas and solutions. Thanks bunches!

    Here are links to the simple 7 pages....
    http://www.rednosedesign.net/home.html
    http://www.rednosedesign.net/about_us.html
    http://www.rednosedesign.net/logos.html
    http://www.rednosedesign.net/flyers_&_ads.html
    http://www.rednosedesign.net/notecards.html
    http://www.rednosedesign.net/business_cards.html
    http://www.rednosedesign.net/contact_us.html

  • How do you apply the same password policy to every PDF document you create with inDesign?

    All,
    Adobe peeps!,
    I don't know if this is really supported with inDesign 5.5, but here is my my use case:
    I constantly create more than 10 PDFs a day using inDesign
    On  all PDF's I create, i want to apply password security to protect them
    But in order to do so, within inDesign, I am   always forced to go to the "security dialogue" pane to set up the same permission  and passwords over and over again
    This gets tiring :/
    So what I am hoping to do is  the following:
    Like acrobat, I want to create a password policy within inDesign
    I want all PDFs created to have such a password policy  be automatically applied
    I know acrobat supports something like this (http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7d68.w.h tml), but, unless I may have missed something, the Acrobat feature is limited. That is, the help link  does not tell me how to automatically do this with Acrobat either (the link does not explain to me how to "automatically apply the same password security policy to every PDF document I save within the application). I think the only way to do so is via "Adobe LiveCycle Rights Management ES", but for non server users, I am hoping there is another way.
    So my questions are:
    Is it possible to create password security policies in inDesign?
    Is it possible to apply the same password security policy to every PDF i create in inDesign?
    If not, can I change default settings within Acrobat ProX to automatically apply a password security policy everytime I save a PDF?
    If all fails, do you guys know of any extensions that can support this?
    Any help would be great. Thanks!

    Steve,
    Thanks for your notes. To follow up on your response.
    Bummer. I kinda had a hunch at this inDesign limitation.
    I have been aware of the method for setting up of a security policy within Acrobat. While this feature does cut down some of the work involved in creating and applying password policies to pdfs, what I am looking for with Acrobat is to apply the same password policy to every document I save from the app. Automatically. Without having to manualy select a policy.
    I think my solution will have to lie in me creating some sort of script to help support this need. I don't think Acrobat Pro X has the capabilities to allow me to tinker with, say, creating a save PDF preset that will allow me to automatically apply a password policy.
    PS. I am using acrobat pro x.

  • How do I use the same Icloud address on my Ipad and Iphone ? I went to put my icloud address on my Iphone, but ttells me it is already being used and to create another one, which I dont want to do

    I have just bought an Iphone 4s to compliment my Ipad Air, I want to use my Icloud address on both machines but cant get my iphone to accept my icloud address, it tells me it is already in use and to create a new one, which is not what I want.. How do I get the same email on both devices?

    it tells me it is already in use
    You will need to contact the previous owner of the iPhone in order to change the Apple ID.

  • How can I get the iBook app on my Mac to backup ePubs I created with Pages on my iPad? Only seems to want to work with purchased from the ibook store.

    How can I get the iBook app on my Mac to backup ePubs I created with Pages on my iPad? Only seems to want to work with purchased books from the ibook store. The problem is, once I create a document in Pages and turn it into an ePub to be opened in iBooks, I delete the document in Pages, because I don't need two copies taking up space on my iPad. Before Maverick, iTunes would backup everything in my iBook app on my iPad. If something ever happened to my iPad, all of my created ePubs would be lost and I would be screwed. I suppose I could keep everything on Pages and go to iCloud and download my documents to my Mac, but that is a lot of steps. I may have to do that if there is no other way, but I am hoping someone will have the answer for me. Pretty disappointed in iBooks app for Mac at this point.

    iBooks only syncs purchased books. Others must be synced in iTunes.

  • I created one iTunes account on one pc and another iTunes account on my current pc. How do I merge the two accounts?

    I created one iTunes account on one pc and another iTunes account on my current pc. How do I merge the two accounts?

    Csound1 wrote:
    iMatch works by matching or uploading the music in your iTunes account, it doesn't matter where the music came from as long as it now in your account, but if you purchased it with a different account you will need to be logged in
    No.
    As long as you computer is authorized for that iTunes account, the songs will work with iTunes Match. The user does not need to be logged in on that computer.
    Husband's computer and husband's iTunes account signed in.
    Songs from wife's iTunes account on computer and computer authorized for wife's account. Songs from both will work with iTunes Match.

  • I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that account.  How do I change the email address to a new one that I can access?

    I created an Apple ID for iTunes using a work email address and left that company before I had an opportunity to change the email and password for that same account.  Now I can't seem to login to that account and I can't choose the option for forgot password because it will send email to the old workplace.  How do I change the email address to a new one that I can access?

    If you remeber the password to that Apple ID then follow these steps
    1 - Make sure you have an email address that is NOT an Apple ID
    2 - Go to AppleID.Apple.com
    3 - Where it reads Manage Apple ID - Sign in
    Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
    [To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
    Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
    I learned this not to long ago and worked for me. Hope this helps you!

  • How can I use the SQL to create a primary key for a existing table?

    create table a(bm number,mc varchar2(20));
    when the table was created,i want to make the column bm as
    the primary key and my SQL is "alter table a enable primary key bm",the system show
    me error,how can I write the right one?

    create table a(bm number,mc varchar2(20));
    when the table was created,i want to make the column bm as
    the primary key and my SQL is "alter table a enable primary key bm",the system show
    me error,how can I write the right one? You do not have any primary key defined on your table yet, so, it does not make sense to enable it (if at all possible) !
    You need to add PRIMARY KEY using something like this:
    SQL> alter table a add constraint pk_a_bm primary key (bm) ;

  • How can we get the reference of XML element on frame as soon as frame is created in Document?

    Hi,
    When ever we copy any text/table cells from any frame, and paste it directly on page, A new Frame is created and the pasted text is placed inside that frame.
    Now to capture this frame creation, We have two possible solutions:
    1) Attach Observer on Document 'kDocBoss' on IID_IHIERARCHY_DOCUMENT and it will notify on frame creation in update function.
    2) Notification event on new story creation.
    Now, I need to perform some changes in the newly created table, for example:
    a)  Need to delete XML tags from newly created frame
    b)  Need to perform action on table cells if any in the created frame.
    But the problem is, when the event comes, I can access basic properties of frame like it's name, type etc, but it does not give me the
    XML element on frame or tables in frame until the event is com pleat.
    I know it's quite a specif requirement, but I guess many of you might have faced these kind of challenges, while processing the event.
    Does any one has any idea how I can get the reference of XML element on frame as soon as it is created?

    Hi Kapoor,
    please give also others a chance, and excuse that I get up late on vacation ;-)
    Anyway, I'd keep the story creation responder to recognize the copy, then combine it with an observer on the backing xml story to catch the associated XML element which is created there. Something like below:
    UIDRef xmlStoryRef = Utils<IXMLUtils>()->GetBackingStore(doc);
    InterfacePtr<ISubject> subject ( xmlStoryRef,IID_ISUBJECT );
    subject->AttachObserver(observer,IID_IIDXMLELEMENT,observer->GetAttachIID());

Maybe you are looking for