How do change SQL Express's in my application?
How do I change an older application created under SQL Express 2005 to SQL Express 2008(R2)? I can run this application using Debug, but can't publish it because of the following message:
INSTALL LOG:
The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 6.0.0 {version}
Running checks for package 'Windows Installer 3.1', phase BuildList
The following properties have been set for package 'Windows Installer 3.1':
Running checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '3.1': true
Result of checks for command 'WindowsInstaller3_1\WindowsInstaller-KB893803-v2-x86.exe' is 'Bypass'
'Windows Installer 3.1' RunCheck result: No Install Needed
Running checks for package '.NET Framework 3.5 SP1', phase BuildList
Reading value 'SP' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5'
Read integer value 1
Setting value '1 {int}' for property 'DotNet35SP'
The following properties have been set for package '.NET Framework 3.5 SP1':
Property: [DotNet35SP] = 1 {int}
Running checks for command 'DotNetFX35SP1\dotNetFx35setup.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'DotNet35SP' and value '1': true
Result of checks for command 'DotNetFX35SP1\dotNetFx35setup.exe' is 'Bypass'
'.NET Framework 3.5 SP1' RunCheck result: No Install Needed
Running checks for package 'SQL Server 2005 Express Edition SP2 (x86)', phase BuildList
Running external check with command 'C:\Users\Terry\AppData\Local\Temp\VSD8D4D.tmp\SqlExpress\SqlExpressChk.exe' and parameters ''
Process exited with code 1
Setting value '1 {int}' for property 'SQLExpressInstalled'
The following properties have been set for package 'SQL Server 2005 Express Edition SP2 (x86)':
Property: [SQLExpressInstalled] = 1 {int}
Running checks for command 'SqlExpress\sqlexpr32.exe'
Result of running operator 'ValueEqualTo' on property 'SQLExpressInstalled' and value '0': false
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionNT' and value '5.1': true
Result of checks for command 'SqlExpress\sqlexpr32.exe' is 'Bypass'
Running checks for command 'SqlExpress\sqlexpr32.exe'
Result of running operator 'ValueEqualTo' on property 'SQLExpressInstalled' and value '0': false
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.1': false
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of running operator 'ValueExists' on property 'Version9x': false
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of running operator 'ValueNotEqualTo' on property 'ProcessorArchitecture' and value 'Intel': true
Result of checks for command 'SqlExpress\sqlexpr32.exe' is 'Fail'
'SQL Server 2005 Express Edition SP2 (x86)' RunCheck result: Fail
A prerequisite failed for Package "SQL Server 2005 Express Edition SP2 (x86)"
Package failed with message "This version of SQL Server 2005 Express Edition (x86) is not supported for the current processor
The above was highlighted by me to save you some scanning.
The following is what I have installed on my PC:
Terry 01
Below messages are logged during installation
<install log>
Running checks for package 'SQL Server 2005 Express Edition SP2 (x86)', phase BuildList
Running external check with command 'C:\Users\Terry\AppData\Local\Temp\VSD8D4D.tmp\SqlExpress\SqlExpressChk.exe' and parameters ''
Running checks for command 'SqlExpress\sqlexpr32.exe'
<install log>
and screenshot also shows the same.
I am NOT an expert in Visual Studio but I would guess that when you have build your package, would have a checkbox somewhere to mention SQL 2005 as pre-requisite. something which should
say check for prerequisites for SQL server 2005 express edition??
On this machine, since you have SQL 2008 R2 installed, the check is failing and hence installation?
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle
Similar Messages
-
How to change sql expression of SQL-Calculated Attribute of view object ?
Hi
jdev 11.1.1.5
I have a view object with a SQL-Calculated Attribute (sumAnalytic) how can I change sql expression of this attribute in runtime?
for example in application module method??Hi Mr Timo
Thanks for your reply but I do not need dynamic vo because I can not change all of my vo
I only need to change expression of SQL-Calculated Attribute of view object in run time.
For this I set expression in view object something like this 'select 2 from dual' and in run time in my AM method I get the vo query and replace 'select 2 from dual' with something like 'selet sum(amnt) over (partition by 1)' and set new query.
But I think the better solution must exist
Thanks -
HoW to ChaNGE the text in the mobile application to be in MulTi-CoLoR text
_* Do anyone can tell me how to change the text in the mobile application to be in multi-color text, to make it more interesting and increase readability?
Is it using the Graphic's paint() method? or any better suggestion?
Please give the short example if can?
Please help... "_"
Hearing from u all soon...@_@
thanks....Go into outline view. If you can see the outlines of the letterforms, you can't just change the text. If the letterforms are solid black, take the type tool, select the text and type yours.
Anyway you can just select the letters, take the type tool and type new text.
Working with the type tool is a basic. Please see the manual for details -
How to change sql-plan in shared pool?
Hi, all.
The oralce is 10.2.0.4 on sun unix.
I created statistics for an index of a table (so big.. partitioned).
As a result, some queries run very well, but some others went bad.
One query, which made a big impact to reponse time, is using "index skip scanning".
However, the query uses "PK index" with bind valuables in sqlplus session.
How can I change sql execution plan in library cache without modifying sql statement in an application module?
Thanks in advance.
Have a good day.Thanks to your reply.
After creating outlines, how can I make EVERY NEW session to use the stored outline??
To be more specific, how can I issue the following command to every new session?
-->ALTER SESSION SET use_stored_outlines=my_OUTLINES;
Do I need to issue the following command??
-->alter system set use_stored-outlines=my_OUTLINES??
Thanks .. -
HOW TO CHANGE SQL QUERY TO GET SPECIFIC RESULT
I HAVE FOLLOWING QUERY AND ITS FUNCTIONING BUT I WANT ALL THOSE RECORD SHOULD BE DISPLADE WICH HAVE NO TRANSACTION IN SALES ANS SALES RETURN WHILE RETREVING DATA FROM DATABASE.
I TRIED TO USE + OPERATOR BUT I DON'T KNOW HOW TO CHANGE THE QUERY TO GET THE RESULT
MAIN TABLE IS BEING USED TO FETCH RECORD
SALES_HEADER,SALES_DETAIL
SALES_HEADERR,SALES_DETAILR
STOCK_REG
AND THE QUERY IS
select s.item_code,S.DESCR,s.GRAND_TOTAL,
sum(decode(d.dayno,01,NVL(S.QTY,0),0)) DAY1,
sum(decode(d.dayno,02,NVL(S.QTY,0),0)) DAY2,
sum(decode(d.dayno,03,NVL(S.QTY,0),0)) DAY3,
sum(decode(d.dayno,04,NVL(S.QTY,0),0)) DAY4,
sum(decode(d.dayno,05,NVL(S.QTY,0),0)) DAY5,
sum(decode(d.dayno,06,NVL(S.QTY,0),0)) DAY6,
sum(decode(d.dayno,07,NVL(S.QTY,0),0)) DAY7,
sum(decode(d.dayno,08,NVL(S.QTY,0),0)) DAY8,
sum(decode(d.dayno,09,NVL(S.QTY,0),0)) DAY9,
sum(decode(d.dayno,10,NVL(S.QTY,0),0)) DAY10,
sum(decode(d.dayno,11,NVL(S.QTY,0),0)) DAY11,
sum(decode(d.dayno,12,NVL(S.QTY,0),0)) DAY12,
sum(decode(d.dayno,13,NVL(S.QTY,0),0)) DAY13,
sum(decode(d.dayno,14,NVL(S.QTY,0),0)) DAY14,
sum(decode(d.dayno,15,NVL(S.QTY,0),0)) DAY15,
sum(decode(d.dayno,16,NVL(S.QTY,0),0)) DAY16,
sum(decode(d.dayno,17,NVL(S.QTY,0),0)) DAY17,
sum(decode(d.dayno,18,NVL(S.QTY,0),0)) DAY18,
sum(decode(d.dayno,19,NVL(S.QTY,0),0)) DAY19,
sum(decode(d.dayno,20,NVL(S.QTY,0),0)) DAY20,
sum(decode(d.dayno,21,NVL(S.QTY,0),0)) DAY21,
sum(decode(d.dayno,22,NVL(S.QTY,0),0)) DAY22,
sum(decode(d.dayno,23,NVL(S.QTY,0),0)) DAY23,
sum(decode(d.dayno,24,NVL(S.QTY,0),0)) DAY24,
sum(decode(d.dayno,25,NVL(S.QTY,0),0)) DAY25,
sum(decode(d.dayno,26,NVL(S.QTY,0),0)) DAY26,
sum(decode(d.dayno,27,NVL(S.QTY,0),0)) DAY27,
sum(decode(d.dayno,28,NVL(S.QTY,0),0)) DAY28,
sum(decode(d.dayno,29,NVL(S.QTY,0),0)) DAY29,
sum(decode(d.dayno,30,NVL(S.QTY,0),0)) DAY30,
sum(decode(d.dayno,31,NVL(S.QTY,0),0)) DAY31,
sum(S.qty) TU
FROM
(select nvl(sales_detail.qty+sales_detail.bonus,0) as qty,
sales_detail.item_code AS ITEM_CODE,
stock_reg.descr AS descr,
s_date as sale_date,stock_reg.GRAND_TOTAL AS GRAND_TOTAL FROM
SALES_DETAIL,SALES_HEADER,STOCK_REG
WHERE SALES_DETAIL.S_ID = SALES_HEADER.S_ID AND
SALES_DETAIL.ITEM_CODE = STOCK_REG.ITEM_CODE(+) AND
STOCK_REG.COMCODE='C1'
UNION all
select -1*nvl(sales_detailR.qty+sales_detailR.bonus,0) as qty,
sales_detailR.item_code AS ITEM_CODE,
stock_reg.descr AS descr,
RETURN_date as sale_date,stock_reg.GRAND_TOTAL AS GRAND_TOTAL FROM
SALES_DETAILR,SALES_HEADERR,STOCK_REG
WHERE SALES_DETAILR.SR_ID = SALES_HEADERR.SR_ID AND
SALES_DETAILR.ITEM_CODE = STOCK_REG.ITEM_CODE(+) AND
STOCK_REG.COMCODE='C1') S,
(select level as dayno
from dual
connect by level <= 31) d
where d.dayno = to_char(s.sALE_date, 'DD') AND TO_DATE(S.SALE_DATE) BETWEEN '&FROMDATE' AND '&TODATE'
GROUP BY S.ITEM_CODE,S.DESCR,S.GRAND_TOTALwell my query running successfully just the quesion was that i wanted to bring some changes in the query to retrieve the complete record which has no transaction in sales
for exmple
if i write the quey
select dept.deptno,sum(sal) from emp,dept
where dept.deptno = emp.deptno
group by dept.deptno
the recult comes as
DEPTNO SUM(SAL)
10 8750
20 10875
30 9400
though there is another deptno which is deptno no 40
have no sal
and when i use this query
select dept.deptno,sum(sal) from emp,dept
where dept.deptno = emp.deptno(+)
group by dept.deptno
it shows the dept no 40 also
DEPTNO SUM(SAL)
10 8750
20 10875
30 9400
40
so to get this i posted query which was to long to understand easily.
i accept that i sholud post short query to make other understand
so check out this
select STOCK_rEG.item_code AS ITEM_CODE,SUM(qty) as qty
FROM
SALES_DETAILR,SALES_HEADERR,STOCK_REG
WHERE SALES_DETAILR.SR_ID = SALES_HEADERR.SR_ID AND
SALES_DETAILR.STOCKCODE = STOCK_REG.STOCKCODE
AND RETURN_DATE = '01-APR-08'
GROUP BY STOCK_rEG.item_code
ORDER BY TO_NUMBER(ITEM_CODE) ASC
when i execute this query i get the following result
ITEM_CODE QTY
84 2
102 3
108 3
116 6
166 3
170 3
thoug there is other items are aalso available in stock which transaction
yet not been done or not been sold out/
so when i use the outer join i get the same result
select STOCK_rEG.item_code AS ITEM_CODE,SUM(qty) as qty
FROM
SALES_DETAILR,SALES_HEADERR,STOCK_REG
WHERE SALES_DETAILR.SR_ID = SALES_HEADERR.SR_ID AND
SALES_DETAILR.STOCKCODE(+) = STOCK_REG.STOCKCODE
AND RETURN_DATE = '01-APR-08'
GROUP BY STOCK_rEG.item_code
ORDER BY TO_NUMBER(ITEM_CODE) ASC
ITEM_CODE QTY
84 2
102 3
108 3
116 6
166 3
170 3
hope i tried to make u understand on better way -
How to change default ports for task flow application?
I deploy a task form with the following hwtaskflow.xml information:
<?xml version = '1.0' encoding = 'UTF-8'?>
<hwTaskFlows xmlns="http://xmlns.oracle.com/bpel/workflow/hwTaskFlowProperties">
<ApplicationName>worklist</ApplicationName>
<LookupType>LOCAL</LookupType>
<TaskFlowDeploy>false</TaskFlowDeploy>
<TaskFlowServer>
*<hostName/>*
*<httpPort/>*
*<httpsPort/>*
</TaskFlowServer>
<hwTaskFlow>
<WorkflowName>ApproverHumanTask</WorkflowName>
<TaskDefinitionNamespace>http://xmlns.oracle.com/MyApp/MyComposite/MyTask</TaskDefinitionNamespace>
<TaskFlowId>MyTask_TaskFlow</TaskFlowId>
<TaskFlowFileName>WEB-INF/MyTask_TaskFlow.xml</TaskFlowFileName>
</hwTaskFlow>
</hwTaskFlows>
When I deploy the form then check the task URI in EM I see
Host name: server host name
HTTP port: 80
HTTPS port: 443
I know I can override these ports in the hwtaskflow but what if I want HTTPS port left blank? We don't have HTTPS active on our server. Another server in our environment only populates the HTTP port (HTTPS port is left blank) but I'm puzzled why the different behavior.
Can anyone tell me either how to specify a "blank" HTTPS port in the hwtaskflow or, preferably, how to change the server configuration so that HTTPS port is not filled in when I deploy the task form? We are wanting a completely automated deployment and presently we have to manually remove the HTTPS port via EM after deploying. Argh!Jon,
May be you already figured out the solution nevertheless i will answer your questions.
1. Turning off the https port - give value as 0 for httpsPort in your hwtaskflow.xml.
Second reason why your custom hwtaskflow is not getting picked up is you have set the TaskFlowDeploy as false.
If you set this as true , and specify your cluster address you should be all set.
for eg : - your cluster host address is somename.cluster.com with only http configured at port 80 lets assume.
Then your hwtaskflow should look like this
<?xml version = '1.0' encoding = 'UTF-8'?>
<hwTaskFlows xmlns="http://xmlns.oracle.com/bpel/workflow/hwTaskFlowProperties">
<ApplicationName>worklist</ApplicationName>
<LookupType>LOCAL</LookupType>
<TaskFlowDeploy>true</TaskFlowDeploy>
<TaskFlowServer>
<hostName>somename.cluster.com</hostName>
<httpPort>80</httpPort>
<httpsPort>0</httpsPort>
</TaskFlowServer>
<hwTaskFlow>
<WorkflowName>LeaveRequestTask</WorkflowName>
<TaskDefinitionNamespace>http://xmlns.oracle.com/BuildApplication/BuildProject/LeaveRequestTask</TaskDefinitionNamespace>
<TaskFlowId>LeaveRequestTask_TaskFlow</TaskFlowId>
<TaskFlowFileName>WEB-INF/LeaveRequestTask_TaskFlow.xml</TaskFlowFileName>
</hwTaskFlow>
</hwTaskFlows>
This will automatically pick up the values on deployment , other play you can configure this is in your em console as well. -
How to change the name of HFM EPMA Application while migrating from dev to
We have HFM EPMA application in Dev env on 11.1.2.2. We want to migrate aplication to production environment with different name. We are using Life cycle management to migrate the application. I know life cycle management but do not know how to change the application name during migration.
As we have EPMA application so copy utility will not work. Please helop.Hi ,
You could use the Copy app utility to migrate the application from Dev to Prod.You could have your desired app name while setting up the copy process.
The EPMA application from Dev will be converted to an Classic application in Prod after the copy.
Then you might need to use the "Transform Classic to EPM Architect" and convert it to an EPMA application.
So your Application with the data from Dev will be moved to Prod.
To Navigate ,
Launch Workspace
Navigate ->Administer->Transform Classic to EPM Architect
Thanks and regards,
Gunasekaran rayar
Edited by: Gunasekaran Rayar on Nov 28, 2012 5:04 AM -
How to execute SQL in a BI Beans application?
BI Beans connect to data stores using class oracle.dss.connection.client.Connection. This class has a method naming executeCommand() for running OLAP DML commands. But I don't think it surport for running SQL.
So how to run SQL, do i have to create another JDBC connection to do that.
Thank u.Hi,
I would recommend using a new JDBC connection to control SQL access as this provides more control over the transactional capabilities available within the SQL environment. Depending on what it is you want to do within the SQL environment.
I think you can use the connection architecture to retrieve information about the host/port/sid/username/password etc which will help in creating the new JDBC connection.
Hope this helps
Keith Laker
Product Manager
Oracle Business Intelligence Beans -
How to change the TAB style of an application
Hi,
I have an application which was initially created using "One Level of Tabs". Now we require "Two Level of Tabs".
Is there some way of changing the Tab style of the application.
Thanks in advance,
MonikaJust forgot to mention that i want the already existing tab set to become the Parent tab set and then i should be able to create the standard tab set for each of the tabs in the parent tab set.
Thanks in advance
Monika -
How to change sql sentence which arrives database.
I am using ORACLE 10G,
I want to add criteria all sql sentence which come ORACLE 10G ,
how to do it ? , trigger or another system attributes
for example
if "select * from user" sql sentence come to db server, I want to change this sentence as "select * from user where mod =1"
thanksAll of my tables have "mode" column, when sql sentence come , I 'll read system_mode another database and then I read,delete,insert and update my tables according to this system_mode,
how to do this, I should block sqls , then read system_mode and finally add this criteria end of the sql sentence
thanks -
How to change SQL Server security groups name after server rename?
A Windows 2003 server has been renamed from LAMDAMIRROR1A to LAMDAMIRROR2A and the following
sql has been run in SQL Server 2008 R2 on the server :
exec sp_dropserver 'LAMDAMIRROR1A'
exec sp_addserver 'LAMDAMIRROR2A','local'
However, although everything appears ok, the 5 Windows 2003 Groups (automatically created by
the SQL 2008 R2 Install) still contain 'LAMDAMIRROR1A' in their name. Does this matter ? Can the Windows Groups be just renamed (right click , rename) or will this cause problems ?
The Windows Groups are :
SQLServer2005SQLBrowserUser$LAMDAMIRROR1A
SQLServerDTSUser$LAMDAMIRROR1A
SQLServerMSSQLServerADHelperUser$LAMDAMIRROR1A
SQLServerMSSQLUser$LAMDAMIRROR1A
SQLServerSQLAgentUser$LAMDAMIRROR1A
There are also Registry entries containing the old 'LAMDAMIRROR1A' name. Does this matter ?
Should this be changed ?
eg.
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\100\Machines\OriginalMachineName.
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\Services\Report Server\GroupPrefix.
My Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\printers\Microsoft XPS
DocumentWriter\DsSpooler\serverName.
etcHi,
If you have executed the sp_dropserver and sp_addserver in SQL Server 2008 R2, we need to verify if you renamed the SQL Server instance successfully. You can select information from @@SERVERNAME or sys.servers to verify if the renaming operation is completely
successful in SQL Server Management Studio (SSMS). If yes, whether you change the registry entries containing the old 'LAMDAMIRROR1A' name or not, there’s no impact on SQL Server Services. For more details, please review this article:
How to: Rename a Computer that Hosts a Stand-Alone Instance of SQL Server.
In addition, if you must rename the windows groups, you can just right-click the group in Computer Management/System Tools/Local Users and Groups/Groups and rename it, or you can create new groups with new names, for more details, please review this article:
Manage Local Groups. If there are some issues regards the Windows, you can post the question in the Windows Server forums at
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver . It is appropriate and more experts will assist you.
Thanks
Lydia Zhang -
How to change sql server reports parameter direction in report builder 3.0
Hi All,
I have created few reports using Report Builder 3.0 with the data source as SharePoint list. i have created a web part page and added the ".rdl"
file, everything is working as expected. Later, i got a requirement to add a parameter to the report , i did that and when i ran the report in SharePoint page, the parameters shows right side and the parameter ribbon shows the dropdown control on top and "Apply
button" at the bottom. When i presented this to my manager, he says the parameter ribbon looks bad and suggested to put both the controls together and also instead of displaying at right side vertical, display it horizontal.
I have below queries
How can i change the direction of parameter ribbon from vertical to horizontal
How can i bring the controls together (e.g. dropdown list control and button)
How can i add buttons on the report in report builder 3.0
How to get/reflect the data in report without refreshing the page.
Can someone please guide me, how to achieve the above functionalities..
MercuryManUnfortunately, where the parameters are located and the button distance away from the parameters are not something you can customize. Here are the options available for customization:
http://msdn.microsoft.com/en-us/library/bb326214.aspx
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
How to change SQL data source in rule file
<p>Hi there,</p><p> </p><p>I use many rule files to load dimension and data with EssbaseSQL interface. (100-200 rule files!).</p><p>When need to cahnge information for data sources, do Ihave to change it always with EAS interactively ?</p><p>Is there any way to cahnge the information of the data sourcesin batch mode or with command?</p>
iitobs:<BR><BR>There are API calls (in at least C and VB that I found) that can use a rule file, and even copy or create one, but none that will modify a rule in any way. Even the "create rule" API call simply reserves the name so that someone else can't create one with that same name until you manage to copy it over from somewhere else - it doesn't create a new rule file, nor does it allow you to set anything in the rule. You have to use EAS to manage rule files internally.
-
How to access SQL tables from WebDynPro ABAP application ?
Hi,
I am trying a scenario, where I need to send an user ID to SQL server table (update/modify/delete) from webDynpro ABAP application.
Basically ,I am trying to know:---
a>How to write a SQL Connection from ABAP code within webdynpro ABAP application
b>What are the ways to do it.(by code or any other API/mechanism)
I appreciate if anybody knows this.
Thanks
PraveenHi,
The EXEC CONNECT ... is usually used in the procedural ABAP code. For this you can refer to the ABAPDOCU.
I dont have any sample code on the classes I listed try to check out them for the parameters and the methods they have.
In WD for Java, we have these connection classes to connect to any databsae server.
Or try to create an RFC with DESTINATION for this
Pls check out this link for this -
Pull data from another r3 server using abap dynpro
Regards
Lekha -
How to change key on runtime form in application server
How it is possible reconfigure key on froms in application server ????
List Values on Client = key "F9"
List values on Application = key "CTRL + L"
and so on.....
can j have the same on client version like apllication ???
Thank You !!Mike,
the fmrweb.res file in the forms90 directory controls the behavior of Forms function keys. There is a file called fmrpcweb.res in the same directory that you can use to bring back client/server key mapping to Forms on teh Web.
1. rename fmrweb.res to something different
2. Make a copy of fmrpcweb.re and name it fmrweb.res
Frank
Maybe you are looking for
-
Hello, I have a audigy 2 ZS, connected to a Creative 5500 Digital speaker systemI dont use the Digital Decoder so the 3 3.5mm jacks go from the back of the soundcard into the Sub bass unit where the speakers are connected?I can use CMSS and CMSS 2 to
-
Lighting cables and adapters are not working after the last iOS 7 update.
Looking for some help from Apple here. After the last iOS 7 update, some of my lightning cables and adapters have stopped working. I have an iPhone 5 funning iOS 7.0.2. I have a car charger/FM RF transmitter that has worked like a charm for years. Be
-
Album ratings and clear stars are ruining my playlists. Help turn them off.
I understand that if you give an album an album rating, it will give all unrated songs on that album clear stars based on the album rating. Because of this, I have not rated any of my albums, since all of my playlists are based off of the song rating
-
Hi All, I have a SP, which calls xp_cmdshell in it. This SP is being used in a MessageQueue. The SQL server and Agent services are configured using a Domain service account, and this service account has a login under the sysadmin server role as well
-
How to install lightroom 4 when the password is not know to the apple mac computer?
how to install the software and not know the password?