How do I a smallint SQL database value using the Database tools?

I'm using the Database Toolset with Labview 7. I'm building up a parameterized Query to a Stored Procedure in my SQL Database. It doesn't appear that smallint output types are supported because zero is always loaded into the variable.
Is this correct? I'm I doing something wrong?
Feedback welcome... thanks!

It's probibly not an issue with datatypes since LV has far more datatypes than most databases. What exactly are you trying to do? Are you getting the 0 when running the stored procedure? Could you perhaps post a bit of code (LV and SQL) that demonstrates the issue?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

How can I add to an existing path using the pencil tool?

This probably seems like a rather elementary question, but
whenever I draw a path using the pencil tool, reselect it,
hover over the endpoint, and the click and drag to extend
the line off into a different direction, Illustrator will often
(but not always) erase the existing path and leave only the
new one that I drew.
To wit:
In step 1 above, I draw a line with the Pencil tool.
In step 2 above, I reselect the line from step 1, hover over the endpoint, and then continue to draw further.
However, as can be seen in step 3, the line from step 1 disappears after I draw the new path.
I am aware of the pencil setting, "Edit selected paths", and I have checked it to edit selected paths
within 12 pixels for the above example. What I am doing in the above example, and what I
want to do, is to be able to add more paths onto an existing one using the pencil tool,
rather than have a completely new path being drawn every time I lift up my pen to finish
drawing the previous path.
I also realize that I can do this with the pen tool; but the pen tool is a more
precise tool (and somewhat more cumbersome), and I prefer to have more
of the rough-handed look from time to time.
Finally, I also know that I can use the direct selection tool to select endpoints
from two different paths and then join them using the join command;
but this seems to be more trouble than it's worth in many cases, especially
if I want to do it frequently for a more long and complicated line.
Am I expecting too much out of Illustrator?
Is my idea of how to use the existing tools wrong in this case?
Is there some piece of knowledge I'm missing?
I'm on Illustrator CS5, Mac OS X 10.6.8, using a Wacom Intuos4 tablet.
However, I have confirmed the above on Illustrator CS4 for Mac as well.
Any help or comments would be much appreciated.
Jeff

Thanks @rcraighead - the Live Paint process seems a bit overkill for simply adding
a new path onto an existing pencil path, but I did try the first idea you suggested,
which was tracing a bit over the last part of the existing path and then continuing
on to extend the path. It's a bit imprecise because the existing path gets slightly
modified, but it seems to work pretty well all in all. Nice idea indeed - thanks a million.
I also found that in AI CS5, I can use the selection tool to select all of the paths
in this case and then join them using the join command. I thought I needed to
select individual anchor points for this to work, but it actually works really
well, better than I thought. I seem to recall that previous versions of Illustrator
were a lot more picky with the Join command, but then again this might just
have been my lack of understanding.
I'm curious to know what other solutions to the above problem that other users
might have, so I will leave this question unanswered for a bit...
but I will use your initial technique described - it seems to work
pretty well, in absence of other options Many thanks again for your timely help.
Jeff

How do I link to another anchored page using the point tool?

Hello
I am using the point tool (arrow tool) to link to anchors in my current page. Is there a way of linking to anchors using the tool in another page (in others words one that I am not working on) or does it need to be done manually?
Thank you
Jake

Arrow Tool??? Which arrow tool do you mean?
Named anchors are deprecated in modern HTML standards. To create links to content on the same page, set up some Div IDs like this.
<section id="one">
     Content one goes here...
</section>
<section id="two">
     Content two goes here...
</section>
<section id="three">
     Content three goes here...
</section>
LINKS ON SAME PAGE:
     <a href="#one">Link 1</a>
     <a href="#two">Link 2</a>
     <a href="#three">Link 3</a>
LINKS ON DIFFERENT PAGE:
     <a href="page_name.html#one">Link 1</a>
     <a href="page_name.html#two">Link 2</a>
     <a href="page_name.html#three">Link 3</a>
Nancy O.

How to Fetch (Home directory/Port Number/Instances) Using the dcmctl tool

Hi All,
Is itpossible to get the Home directory name/Port number/Instances running using the dcmctl.bat file.This file comes under oracle 9ias/dcm/bin.This is Very Urgent
Regds,
G Sreekumar

Don't believe so. The only informative option is getstate -v
///note that you should NOT run dcmctl with a running EMCTL (EM Website)

How to have the BIND variables value using the TKPROF utility.

WE have a JAVA application and Oracle 9i database.We need to figure out what all select/update/insert sql staements are firing if i am doing one complete processing in my JAVA front application.
Initally I have planned for using TKPROF utility after makeing AUTO_TRCE=TRUE in the database.But the problem is that all select/insert/update sql statements are using the BIND variables in the JAVA code and same is coming/printing on the trace file also.
can we print out the BIND variables values also,while making the TRACE ON?
eg: trace is generaitng the all insert statements like below.
insert into TEST(Column1,Column2) values(:1,:2);
I want to know the value of :1 and :2 bind variables.
If you have any cluse about it please let me know.
Mitesh Shah

Thanks Guys,
I got the BIND variable values in the TRACE file.Previously i was searching on the OUtputfile.
I am pasting the same trce file format.Can you please verify it.Is i am looking the correct file and corect location.
PARSING IN CURSOR #2 len=1571 dep=0 uid=66 oct=3 lid=66 tim=18446744071740803342 hv=1462188955 ad='123434f0'
SELECT PARENTIDKEY,CONTRACTKEY,COMPANYKEY,BACKENDKEY,DATAREP,BANKHOLDINGID,BANKID,CARRIERPARTYID,PRODUCTID,ID,PREMIUMINDEXRATE,ILLUSTRATEDMATURITYLOW,ILLUSTRATEDMATURITYHIGH,SPECIALHANDLING,CARRIERCOMMCODE,MONEYTRANSFERTYPE,FIRSTBILLSKIPMONTH,CONTESTABILITYENDDATE,DEDUCTIONDATE,MARKETVALADJUSTIND,FREEAVAILABLEAMT,ADVANCINGREJECTEDIND,RATEDIND,OTHERINSUREDIND,ENDORSEMENTIND,BENEFICIARYIND,CASECONTROLNUMBERASSUMING,OWNERLEGALNAME,STAMPDUTY,COMMISSIONANNUALIZEDIND,NONSTDCOMMTAKEN,LAPSETAXABLEGAIN,GOVTALLOTMENTSUSPENSEACCTAMT,LASTNOGOODCHECKREASON,LASTNOGOODCHECKDATE,LASTCOIDATE,LASTDEDUCTEDEXPENSECHARGES,LASTDEDUCTEDCOICHARGES,STATEMENTBASIS,LASTNOTICETYPE,LASTNOTICEDATE,PAYMENTDUEDATE,LASTBANKCHANGEDATE,EFTENDDATE,BANKBRANCHNAME,BANKNAME,PAYMENTDRAFTDAY,BANKACCTTYPE,CREDITCARDTYPE,CREDITCARDEXPDATE,ACCTHOLDERNAME,ROUTINGNUMBER,ACCOUNTNUMBER,PAYMENTMETHOD,ANNUALPAYMENTAMT,PAYMENTAMT,PAYMENTMODE,LASTCOIANNIVDATE,BILLINGSTOPDATE,BILLEDTODATE,FINALPAYMENTDATE,GRACEPERIODENDDATE,PAIDTODATE,STATUSCHANGEDATE,REINSTATEMENTDATE,TERMDATE,ISSUEDATE,EFFDATE,DOWNLOADDATE,DURATION,POLFEE,POLICYVALUE,COMMISSIONROLLOVERPCT,COMMISSIONOPTIONSELECTED,REPLACEMENTTYPE,CUSIPNUM,CONVERTTOPRIVATEIND,PORTABILITYIND,REINSURANCEIND,BILLNUMBER,JURISDICTION,ISSUETYPE,ISSUENATION,STATUSREASON,PRIORPOLICYSTATUS,POLICYSTATUS,SHORTNAME,ADMINISTERINGCARRIERCODE,PLANNAME,FILEDFORMNUMBER,FORMNO,CARRIERCODE,PRODUCTCODE,PRODUCTTYPE,LINEOFBUSINESS,CERTIFICATENO,POLNUMBER,CARRIERADMINSYSTEM FROM "POLICY" WHERE PARENTIDKEY = :1 AND CONTRACTKEY = :2 AND COMPANYKEY = :3 AND BACKENDKEY = :4
END OF STMT
PARSE #2:c=0,e=1298,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=0,tim=18446744071740803336
BINDS #2:
bind 0: dty=1 mxl=4000(4000) mal=00 scl=00 pre=00 oacflg=01 oacfl2=0 size=4000 offset=0
bfp=082a5a9c bln=4000 avl=09 flg=05
value="Holding_1"
bind 1: dty=1 mxl=4000(4000) mal=00 scl=00 pre=00 oacflg=01 oacfl2=0 size=4000 offset=0
bfp=082a4af0 bln=4000 avl=10 flg=05
value="DUL001138U"
bind 2: dty=1 mxl=4000(4000) mal=00 scl=00 pre=00 oacflg=01 oacfl2=0 size=4000 offset=0
bfp=069bb890 bln=4000 avl=02 flg=05
value="00"
bind 3: dty=1 mxl=4000(4000) mal=00 scl=00 pre=00 oacflg=01 oacfl2=0 size=4000 offset=0
bfp=069ba8e4 bln=4000 avl=04 flg=05
value="CLIF"
**********************************************************************************

How to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part

Hi,
I want to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part like mentioned below:
http://server/pages/Default.aspx?Title=Arup&Title=Ratan
But it always return those items whose "Title" value is "Arup". It is not returned any items whose "Title" is "Ratan".
I have followed the
http://office.microsoft.com/en-us/sharepointserver/HA102509991033.aspx#1
Please suggest me.
Thanks | Arup
THanks! Arup R(MCTS)
SucCeSS DoEs NOT MatTer.

Hi DH, sorry for not being clear.
It works when I create the connection from that web part that you want to be connected with the Query String Filter Web part. So let's say you created a web part page. Then you could connect a parameterized Excel Workbook to an Excel Web Access Web Part
(or a Performance Point Dashboard etc.) and you insert it into your page and add
a Query String Filter Web Part . Then you can connect them by editing the Query String Filter Web Part but also by editing the Excel Web Access Web Part. And only when I created from the latter it worked
with multiple values for one parameter. If you have any more questions let me know. See you, Ingo

How can i know if my query is using the index ?

Hello...
How can i know if my query is using the index of the table or not?
im using set autotrace on...but is there another way to do it?
thanks!
Alessandro Falanque.

Hi,
You can use Explain Plan for checking that your query is using proper index or not. First you need to check that Plan_table is installed in your database or not. If it is not there THEN THE SCRIPT WILL BE LIKE THIS:
CREATE TABLE PLAN_TABLE (
STATEMENT_ID VARCHAR2 (30),
TIMESTAMP DATE,
REMARKS VARCHAR2 (80),
OPERATION VARCHAR2 (30),
OPTIONS VARCHAR2 (30),
OBJECT_NODE VARCHAR2 (128),
OBJECT_OWNER VARCHAR2 (30),
OBJECT_NAME VARCHAR2 (30),
OBJECT_INSTANCE NUMBER,
OBJECT_TYPE VARCHAR2 (30),
OPTIMIZER VARCHAR2 (255),
SEARCH_COLUMNS NUMBER,
ID NUMBER,
PARENT_ID NUMBER,
POSITION NUMBER,
COST NUMBER,
CARDINALITY NUMBER,
BYTES NUMBER,
OTHER_TAG VARCHAR2 (255),
PARTITION_START VARCHAR2 (255),
PARTITION_STOP VARCHAR2 (255),
PARTITION_ID NUMBER,
OTHER LONG,
DISTRIBUTION VARCHAR2 (30))
TABLESPACE SYSTEM NOLOGGING
PCTFREE 10
PCTUSED 40
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 10240
NEXT 10240
PCTINCREASE 50
MINEXTENTS 1
MAXEXTENTS 121
FREELISTS 1 FREELIST GROUPS 1 )
NOCACHE;
After that write the following command in the SQL prompt.
Explain plan for (Select statement);
Select level, SubStr( lpad(' ',2*(Level-1)) || operation || ' ' ||
object_name || ' ' || options || ' ' ||
decode(id, null , ' ', decode(position, null,' ', 'Cost = ' || position) ),1,100)
|| ' ' || nvl(other_tag, ' ') Operation
from PLAN_TABLE
start with id = 0
connect by
prior id = parent_id;
This will show how the query is getting executed . What are all the indexes it is using etc.
Cheers.
Samujjwal Basu

Return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST

Hi,
How to return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST?
For example : if the row has 3 columns then after selecting the particular row, the RETURN_TAB internal table should contain all the three column values.
Regards,
Raghu

Hi,
   Try the following...
DATA : it_fields like help_value occurs 1 with header line.
data: begin of w_vbap,
        vbeln      like vbap-vbeln,
        posnr      like vbap-posnr,
        werks      like vbap-werks,
      end of w_vbap.
data: i_vbap   like w_vbap   occurs 0 with header line,
         w_fields type help_value,
      i_dfies type table of dfies,
      i_return_tab type table of ddshretval with header line,
      i_field type dfies.
select vbeln posnr werks
      from vbap into table i_vbap up to 5 rows.
if sy-subrc = 0.
   sort i_vbap by vbeln.
endif.
clear it_fields[] , it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'VBELN'.
it_fields-selectflag = c_on.
append it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'POSNR'.
it_fields-selectflag = space.
append it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'WERKS'.
it_fields-selectflag = space.
append it_fields.
loop at it_fields into w_fields.
    i_field-tabname   = w_fields-tabname.
    i_field-fieldname = w_fields-fieldname.
    i_field-keyflag   = w_fields-selectflag.
    append i_field to i_dfies.
endloop.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      retfield               = 'VBELN'
     window_title           = 'Select'
    tables
      value_tab              = i_vbap
      field_tab                = i_dfies
      return_tab             = i_return_tab
   exceptions
     parameter_error        = 1
     no_values_found        = 2
     others                 = 3
read table i_return_tab into w_return_tab index 1.
if sy-subrc = 0.
endif.
Regards,
Srini.

How to turn off measurements when using the line tool

Hello. I'm sorry to trouble you with this small thing but its driving me nuts. I'm using a shared computer at a university and we just upgraded to CS6. When I use the line tool while making a mask a box pops up which measures the line's length and angle. I want to turn it off, and it blocks being able to see what I am trying to mask. I've tried looking this up online and in Photoshop help but I just don't know the correct terminolgy, i.e. what to call it, to find out how to turn it off. Thank you so much so much for any help!
here is a jpg screenshot: https://www.dropbox.com/s/njena5x9ppajzqq/linetool.jpg

That looks like the on-image displays that were added to photoshop cs6
You should be able to turn that off in Photoshop>Preferences>Interface>Show Transformation Values and set Never as the value.

How do I automatically create bookmarks in adobe using the Scanjet pro 3000 s2?

How do I automatically create bookmarks in adobe using the Scanjet pro 3000 s2?

Does the file you are writing have a timestamp in it? If so you could read the timestamp from the last time it was written and see if the day has changed, handling the name of the file appropriately. The easiest way to record the timestamp is probably to write the timestamp as the number of seconds that have elapsed since 12:00 am on Firday January 1st 1904 in UT. The "Get Date/Time in Seconds" function will give you this value.
Message Edited by jmcbee on 03-05-2009 12:56 PM
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

Delete the transferred values using the transaction for changing old assets

how to Delete the transferred values using the transaction for changing old assets.
i want delete the my asset.
Thank you
Anil

Dear Anil,
AS06 Delete Asset Record/Mark for Delet.
AS26 Mark group asset for deletion
Hope this will help.
Regards,
Naveen.

How do I use the brush tool on a video in cs6? It only stays on one frame?

How do I get what I create with the brush tool to stay on every frame in my video? I've got some footage of a car trip and I'm trying to use the brush tool to make a super 8 looking border, but it vanishes when I play the video because its only on one frame.

When Photoshop just won't work properly, try replacing the Preferences file by using this procedure:
Open Photoshop and save your custom goodies. Choose Edit→Presets→Preset Manager to save sets of styles, brushes, and other such bits and pieces you created. Use the Save Actions command in the Actions palette menu to save any sets of custom Actions.
Review your Preferences. Open Photoshop's Preferences and go through each pane, noting your preferred settings so that you can restore your work environment later.
Quit Photoshop. You can close the program like this:
On a Mac: Hold down Command+Shift+Option and restart Photoshop. When prompted, release the modifier keys and confirm, that yes, you do want to replace the Photoshop settings.
On a PC: Restart Photoshop; immediately press and hold down Ctrl+Shift+Alt. When prompted, release the modifier keys and confirm, that yes, you do want to replace the Photoshop settings.

How do I enlarge my web page to use the whole screen?

How do I enlarge my web page to use the whole computer screen?

Reduce dock size or hide same.
Also depends on what browser you're using all have full screen modes.
Safari :
http://support.apple.com/kb/PH11941
To enlarge an entire webpage so it uses the screen, click the arrows in the top-right corner of an app window:

How do i share music with 2 iphones using the same apple id?

how do i share music with 2 iphones using the same apple id?

Sync them both to the same iTunes music library. You can also automatically download purchased music to both by going to Settings>iTunes & App Stores and turning Music to On under Automatic Downloads. If you music is in multiple computers, you can enable Home sharing to share your music library across multiple devices (see http://support.apple.com/kb/HT3819).

How can I use the versionning tool to make a coherent solution to export

how can I use the versionning tool to make a coherent solution to export all objects used in my project to other db schema for testing as well as for implementation .
I want to know proper steps to Import/export objects.
while I am exporting my Master repository and work repository then again importing the all , no problem comes all the physical logical schema mapping and mapping between interfaces retains but
while I am trying to export and import one or two packages on the ease of testing then I am getting so many mismatches manually I am setting all why so?
required ur suggestion
Palash Chatterjee

kelly-bot wrote:
Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
Our posts overlapped there. Are you saying you could reliably drag one pixel with CS3?
What other issues are you having? Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

How do I a smallint SQL database value using the Database tools?

Similar Messages

Maybe you are looking for