How do I add items to a collection after the collection has been created?

I can't figure this out. I click on the gear icon next to my collection name but I don't see the feed you initially see when you create the collection?

+1
Join this issue!

Similar Messages

  • How to get an app on new iPad after the app has been pulled from app store?

    I have the vlc player app on my iPad 2 and want to put it on my ipad3. Since it has since been pulled from the store, how do I get it on my new iPad? I is no other app that I have found that can replace it.

    I did that before I bought the new iPad and was able to transfer all my other apps, somehow the app never made it to my current iPad. I'll try again and let you guys know once I get home to my laptop.

  • HT3986 How do I start up Mac after the Windows has been installed.

    How do I start up Mac after the Windows has been installed? And after I installed the Windows, my Audio is gone. How can I get it back?

    Welcome to the Apple Support Communities
    1. To boot into Mac OS X, press X key while your computer is starting.
    2. Install Boot Camp drivers

  • How can I uninstall Trend Micro Safe Surfing once the app has been deleted from my Mac OS X?

    How can I uninstall Trend Micro Safe Surfing once the app has been deleted from my Mac OS X?

    Check to see if there's such a folder as  either
    /Library/Application Support/Trend Micro
    ~/Library/Application Support/Trend Micro
    and if so, see if either contains an uninstaller.
    Failing that, download the demo version of the app from Trend Micro, and try the uninstaller that it should contain.
    If all else fails, the manual way would be to use something like EasyFind and search for anything with "com.trendmicro" in the filename (you can use Finder, but be sure to include system files and invisible files in the search options). Pay particular attention to the folders
    /Library/LaunchAgents
    /Library/LaunchDaemons
    ~/Library/LaunchAgents
    ~/Library/Internet Plug-Ins
    ~/Library/Preferences

  • How do I spot a command in pages after the app has locked up?

    how do I spot a command in pages after the app has locked up?

    I am not sure what you mean by "spot a command" but in any case this question would likely be better lodged in the iWork Discussion.

  • TS4009 how do you retrieve information after the system has been reset to default

    how do you retrieve information after the system has been reset to default?

    From a backup on itunes or icloud, assuming you have made backups.  Connect to itunes and in the first tab for your device, choose to perform a restore.

  • How can I delay my MBP from hibernating until the lid has been closed for a set period of time?

    After extensive research, I have been unable to solve this problem and I'm hoping someone can explain this to me.   Everytime I close the lid on my 13-inch, Early 2011 Macbook Pro, it immediately starts to write to disk (solid light on the front) for several seconds until it finally goes into Hibernate mode (flashing light on the front).  The problem is, I frequently close the lid, then immediately reopen it within 15-30 seconds to resume typing or to add something I may have forgotten.   Each time I reopen the lid before the light has started flashing, the MBP wakes for a moment, and allows me to resume typing.  However, the Hibernation process has already begun and within 30 seconds, the screen goes blank.   I have to wake it AGAIN, which is very annoying.
    Based on my research, I could use pmset to change the hibernatemode to 0 (it is currently set at 3).   However, I dont wish to disable hibernate mode completely; I DO want it to save a hibernation image to disk if it happens to run out of battery, so that when I resume I havent lost anything.   
    I then researched using standby and standbydelay to attempt a delay of the write to disk when going into standby mode.   According to the pmset manual:
    standby causes kernel power management to automatically hibernate a machine after it has slept for a
         specified time period. This saves power while asleep
    standbydelay specifies the delay, in seconds, before writing the hibernation image to disk and powering
         off memory for Standby
    I then set these values as below, expecting the laptop to wait 4200 seconds (70 minutes) before trying to write to disk when I close the lid:
    standbydelay         4200
    standby              1
    Unfortunately, that did not work either.   If I close the lid, the light glows solid immediately (indicating it is writing to disk), and if I try to reopen the lid before it is done, it will wake and seem fine, then 30 seconds later it goes blank right in the middle of me typing something.   I usually have to click the mouse several times, or even the power button to re-wake it.  
    I do have InsomniaX installed, for when I want to close the lid and keep the machine awake permanently (while watching videos on airplay) and I have tried quitting that application to test this.  However, when I close/reopen the lid..the result is the same.   I cant keep InsomniaX enabled all the time, because it will never go to sleep when I truly want it to.   If I am not using InsomniaX, I just want to delay hibernation until he lid has been closed for a set period (say 15 minutes or more).  If I have not reopened the lid within that time, I want it to write to disk and go into hibernation mode.  And if the battery runs all the way out, I want it to go into hibernation mode before shutting down so I can recover.
    I would appreciate any help in solving this problem.  Also any insight as to why the standbydelay setting above did not work.   Thanks!

    Whats with the MBP lid? Dont close it ... if you're so concerned! Just go to System Preferences/Energy Saver and set it to how you like it.

  • How to Change iWeb page themes after the page has already created?

    Once you have created a page with a theme and saved it, and then later you want to change it to another theme... How does one change theme without recreating the page?
    Also, How does one add background music to a page once it is opened?
    Thanks!
    T.

    I too am wondering about your first question, but I have found a workaround for your second question.
    First save the audio clip as a mov file in quicktime, then place it somewhere on the page. Make it small and out of the way and hide ot from site.
    Now publish the site. Then you will have to change the HTML. Open text edit and select "Ignore Rich Text Commands". Open the iDisk icon on the left and find the Web folder then follow this string Web/Sites/iWeb/<Your Site Name>/<then the page name folder, example: "Home_files">/then "Home.js"
    Once opened find the quicktime file use the find feature it will list the properties twice, the second listings are the ones you want to change. Change controller="true" to controller="false". Then autoplay="false" to autoplay="true" and loop="false" to loop="true".
    If you change that specific page and republish you will have to do this again, but only if you change that page. You will not if you rebublish and you had made no changes to that specific page.
    Hope this helps.
    Pastor Josh
    http://www.kentchristiancenter.org
    http://web.mac.com/highergroundyouth
    MBPro 2 GHZ 2gigs, Ipods: 80gig Video, 512 Shuffle, 4gig Silver Mini   Mac OS X (10.4.8)  

  • I can't find how to download a pre-ordered album on my ipod after the album has been released.

    I pre-ordered an album on my ipod a few weeks and it just came out today. When I got to the store and clicked on the album it says purchased. I can't find how to download the album on my ipod.

    Hi there,
    You may find the article below helpful.
    iTunes Store: About Pre-orders
    http://support.apple.com/kb/HT5714
    When a pre-order item becomes available, you will receive an email letting you know your pre-order is available for download.
    -Griff W.

  • After a library has been created with the "Copy items to the iPhoto library" option unselected, can it later be made to create those copies?

    iPhoto 9.4.3
    iPhoto Library Manager 3.6.8
    MacBook Pro - OS X 10.7.5.
    I have a large number of iPhoto libraries, organized with iPhoto Library Manager, that I created with the "Copy items to the iPhoto library" option unselected because I wanted easier access to the individual files. I am now going to be migrating to a new computer and have run into some problems with iPhoto losing the path to the file, and as a result showing me the exclamation point of doom. What's more, the program doesn't seem very intelligent about rebuilding those lost connections, and I have to go back through and correct it manually almost one at a time. How do I get around this problem?
    If I rebuild my new computer from a Time Machine backup (I usually enjoy taking this opportunity to start from a clean slate, but...), will the paths all be preserved without me needing to abandon my organization system?
    Or is there some way to ask iPhoto or Library Manager to create and organize copies of all the photos in the library that are not currently present within the library?
    On a tangentially related note, what's the best way to save keywords (and ideally also faces) added in iPhoto to the photos' meta data?
    Much obliged.

    Not with iPhoto by itself.  If you have the lastest version of Aperture and iPhoto referenced libraries can be converted to managed with Aperture.
    You can convert to a managed library with  iPhoto Library Manager by rebuilding the library with iPLM.  This will create a new, managed library with all your photos in it and with all Events, albums, keywords, titles, descriptions and places intact. However, books, calendars, slideshows and cards will not be retained.  They will end up as albums containing the photos.
    OT

  • How can I delete an ODBC data source after 10g client has been uninstalled?

    I uninstalled the 10g client and now when I attempt to delete the ODBC data source, I get an error: "The setup routines for the Oracle in Oraclient10g_home2 ODBC driver could not be found. Please reinstall the driver. I re-installed the client and I get the same error, but I had to specify a new home. I still get the error. Anyone have an answer or a workaround to deleting the ODBC entry so that I can re-create with the same name later under the 9i client?

    I have the same problem... and nobody gots the point:
    1st. the ODBC and the client/home exists on the machine...
    2nd. the client/home is unistalled and so...
    3rd. tada! Now we have a impossible-to-unistall ODBC entry!
    That is happening on a Windows, at last to me...
    Please, help us if someone knows how to remove this ODBC entry... if know how to DO the stuff (permissions, system, all that things is answered above).
    Best regards,
    Bruno Araujo

  • How can I see in which Group the workspace has been created ?

    Hi,
    The BeehiveOnline Tutorial on slide 7 shows that Workspaces are created within a Group.
    Also the Group Administration screen suggests this as I can indicate that user ABC gets the role 'Workspace Creator' in one Group but same user ABC does not get the role 'Workspace Creator' in another Group. (what else is the purpose of this role within Group Administration)
    But when I created my workspace, the system did not ask in which Group I wanted it to be created, neither can I see in the Settings of the new Workspace to which Group it belongs.
    Can you please help ?
    Thanks,
    Peter

    Peter,
    Workspaces and groups can be confusing - apologies that it was not clear.
    Perhaps some background as to why I described it that way may help.
    BeehiveOnline relies on groups to be self-sufficient - if you are in one group your world of available participants is that group and that group alone. So if you want to create a new workspace and add users they can only be drawn from that group. - hence the workspaces within a group setup. However, if you are in multiple groups then the linkage gets broken as you could add members to a workspace from different groups - if you needed many group to share a repository of read-only info for instance. This is in wide use on BeehiveOnline. Read and Write access is more of a problem as if anyone updates a document or creates one their id will be attached to it and if they are in a group you as a workspace member cannot see it will cause confusion.
    So workspaces are only group restricted if there is only one group. If you have multiple groups you have more scope but have to exercise more care.
    Hope that explains it.
    Phil

  • HT4623 How do I get back to Setup Assistant after the settings have been entered?  I need to get back to Setup Assistant to back up the data that was on my iphone 4S to my new 5S

    I purchased a new iphone 5s yesterday from Verizon.  They had a problem setting it up.  They went through Setup Assistant setting up the phone.  They could not get my back up I had on iCloud, so they just skipped it.  Now I do now have all my apps or other data.
    I have been doing some reading and it said to go back to Setup Assistant.  I can't firgure out how to do that.
    Can anyone help me?

    Are you wanting to restore from your backup?  IF so, go to settings - general - reset - erase all contents or settings this will wipe yoru phone clean, then you'll get the option to restore from backup.

  • How do I get song titles after the track has been installed in library. there used to be a get title option but in 11.0.1 I can't find it?

    This option used to be available in earlier versions of iTunes but I can't locate it in 11.0.1.
    While importing into the library the online link to gracenotes was lost and the track appears as Track 1 etc in the library

    You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
    If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

  • How can we change the structure after a Journal has been created??

    Hi Experts,
                    We have made an application and create a journal for it using the journal wizard.
    But later on on the development, we need to change or modify the structure of the application.
    so when we try to do it, the system prompt that we cant change the structure because it has journals.
    so we use the clear journal function and try it again. It still give the same prompt.
                    How can we deal with this problem?? we really need to change the structure.
    Thanks,
    Bennie Jay

    Hi Shova V.
                  I tried it and it worked!!! thanks!!  although it doesn't work for the first time when i try to modify. if have to process it first for  it to work.
                  I just hope in the next version it shouldn't be manually done.
    Thanks,
    Benniejay

Maybe you are looking for

  • Is there any way to identify the particular socket connection is closed ?

    Is there any way to identify the particular socket connection is closed or not ? Any methods ??? How can the program knows the connection is lost or some thing ... Is the socket throws some excpetions when there is no active connection ??? namanc

  • Open order qty & values

    I am using tye datasrc 2lis_11_v_itm for loading oen order qty & open porder values in to cube 0sd_c03 When I compare these values with va05 eneter sold to party & sale org,document date  selct open sales orders & execute Then in that report I am che

  • Change account setting from POP to .mac in Mail

    OK, I have an account I set up in Mail. It is a .mac account, but I inadvertently set it up as POP. Suddenly on March 1st, sending messages from that account would always fail. "Cannot send message using server smpt.mac.com" It works fine now from my

  • Error: There is a problem with the file and it cannot be copied

    I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the

  • Using iFrames in a JSP

    Is there anyway data can be passed from an iFrame (JSP) to the parent JSP ? My case is ths... <html> <select name="group"> <option>.......</option> </select> <iframe>........</iframe> </html> I am able to successfully pass the group selected from the