How do I add two FX Styles onto one layer?
Hi,
I hope I've come to the right place.
I have a small problem. I'm trying to add two different FX Styles to a text layer, is this possible and If so, how would I go about doing this?
I'd like to "merge" these two effects into the text layer.
I hope I've explained my dilema properly.
Thank you for taking the time to read this any help would be greatly appreciated.
What I did was, copy the layer, removed the FX from that layer and added the FX I was looking for onto the copy and presto - I got the layer to look exactly how I wanted it.
Thanks again, I'll be sure to ask you for any advice in the future if i have any and you're willing to help.
Similar Messages
-
How can you have two link styles on one page?
I have one style (formatted link style) for internal links in
my footer but I want a different style for the external links in my
mainContent. Is it possible to have two different "styles" of links
on one page? I tried creating a new set for the mainContent links
and being positioned underneath my footer link's styles, the "new"
mainContent link styles overrode the footer link style. Is there
another way of going about this?
Thanks anyone, JulieJulie:
> I'm just not code savvy.
As long as you permit yourself to offer this argument, you
will struggle
with Dreamweaver. If you are serious and want to improve, you
will have to
overcome your code-phobia.
What is in these two files?
> <link href="css/area.css" rel="stylesheet"
type="text/css" />
> <link href="css/footlinks.css" rel="stylesheet"
type="text/css"
> media="screen"
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Rock Artist" <[email protected]> wrote in
message
news:[email protected]...
> Murray, I was just looking over my code and noticed the
links in my footer
> are
> styled, in the first place, by a class I created in my
main.css (for all
> of my
> pages) called ".webdis" (nickname for webmaster and
disclaimer). I do see
> my
> link format style in the head of this document but am I
supposed to see it
> where the footer is (in the code)?
>
> If you look at the first external link (the only one I
have attached a
> link to
> so far):
> </p>
> <p class="contentlinx"><a href="
http://www.hotsprings.org/">Hot
> Springs
> Convention & Visitor's Bureau</a><br
/>
>
http://www.hotsprings.org/<br
/>
> </p>
>
> It took on same style as my footer links. I'm a little
frustrated, it just
> seems like it should be so simple. I'm ready to launch
this thing tonight
> and
> this is the only "little" thing I have left to do. I
hate to cheat and
> make
> each one of these site links a graphic and link it as a
graphic, but I am
> so
> ready to get this thing up.
>
> I'm just not code savvy. I am going to attach my code to
this reply and
> maybe
> you can tell me what I'm doing wrong. Thanks, Julie
>
>
>
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=UTF-8" />
> <title>Area Interests</title>
>
> <link href="css/main.css" rel="stylesheet"
type="text/css" />
> <style type="text/css">
> <!--
> .contentlinx {
> font-family: Arial, Helvetica, sans-serif;
> font-size: 14px;
> color: #336600;
> }
> -->
> </style>
> <link href="css/area.css" rel="stylesheet"
type="text/css" />
> <link href="css/footlinks.css" rel="stylesheet"
type="text/css"
> media="screen"
> />
> </head>
>
> <body>
> <div id="wrapper">
> <div id="header"></div>
> <div id="sidebar">
> <p align="center"><a
href="index.html"><img
> src="images/vert_nav_bar/home_button.jpg"
alt="navigation button to home"
> width="155" height="50" /></a><a
href="property.html"><img
> src="images/vert_nav_bar/property_button.jpg"
alt="navigation button for
> property" width="155" height="50" /></a><a
href="maps.html"><img
> src="images/vert_nav_bar/maps_button.jpg"
alt="navigation button for maps"
> width="155" height="50" /></a><a
href="gallery.html"><img
> src="images/vert_nav_bar/gallery_button.jpg"
alt="navigation button for
> photo
> gallery" width="155" height="75" /></a><a
href="gallery.html"><img
> src="images/vert_nav_bar/area_button.jpg"
alt="navigation button for area
> interests" width="155" height="75" /></a><a
href="contact.html"><img
> src="images/vert_nav_bar/contact_button.jpg"
alt="navigation button for
> contact
> us" width="155" height="75" /></a></p>
> <div id="sidephoto"><img
src="images/tree_flower.jpg" alt="garvan tree
> flower" width="145" height="275" /></div>
> </div>
> <div id="header2">
> <h2 class="style2">AREA INTERESTS</h2>
> </div>
> <div class="proptext" id="content">
> <p>HOT SPRINGS NATIONAL PARK, ARKANSAS</p>
> <div id="photofeature"><img
src="images/garvin_stream.jpg" alt="garvan
> gardens" width="275" height="218" /></div>
> <p align="left">America's first resort, also
referred to as "The
> Spa
> City", Hot Springs definitely has a pulse
> of its own. Visit the sites below to find out why this
is one of
> the
> most popular vacation destinations in the South.
Featuring world famous
> natural
> hot springs, historic bathhouse row, and thoroughbred
horse racing at
> Oaklawn
> Park. The perfect place to relax, the perfect place for
adventure, Hot
> Springs
> provides a year-round opportunity for outdoor
recreation, world-class bass
> fishing and fabulous water sport activities, hiking,
horseback riding and
> quartz crystal hunting. In fact, take a day trip to
Murfreesboro to the
> Crater
> of Diamonds State Park, the only diamond-producing site
in the world that
> is
> open to the public and try your hand at diamond hunting
or searching for
> 40
> other types of semi-precious stones, rocks and minerals.
Garvan Woodland
> Gardens, a 210 acre forested peninsula jutting into Lake
Hamilton with a
> showcase of floral landscapes, streams and waterfalls,
is a "must
> see". Hot Springs has a strong art community as
well. Enjoy artist's
> galleries, film-making events and musical venues all
over town. Did I
> mention
> historical architecture? There is too much to mention
here about this
> wonderful
> city, please see for yourself by visiting the local
sites below to see
> what's
> happening in and around town.<br />
> </p>
> <p class="contentlinx"><a href="
http://www.hotsprings.org/">Hot
> Springs
> Convention & Visitor's Bureau</a><br
/>
>
http://www.hotsprings.org/<br
/>
> </p>
> <p class="contentlinx">Facts About Hot
Springs<br />
>
http://www.hotsprings.org/media_room/news-detail.asp?news_id=9</p>
> <p class="contentlinx">City of Hot Springs<br
/>
>
http://cityhs.net/</p>
> <p><span class="contentlinx">The Greater Hot
Springs Chamber of
> Commerce<br />
>
http://www.hotspringschamber.com/</span><br
/>
> </p>
> </div>
> <div id="footer">
> <p><span
>
class="webdis">WEBMASTER | &
> nbsp;<a
href="disclaimer.html">DISCLAIMER</a></span></p>
> </div>
> </div>
> </body>
> </html>
> -
How can I consolidate two iTunes libraries onto one disc?
OK... here's the deal...
I am permanently in a nursing home and was only available to bring my MacBook Pro to my new "home"... however, I had a back-up of my Intel iMac's iTunes library on a small 250GB portable drive so what I would like to do is:
1) re-direct my iTunes folder to my 'old' large 'main' iTunes library, and;
2) somehow consolidate the 'new' library on my MBP to that library (about 12 gigs) without having to open each track to add it to the 'newest' library.
I don't think that this is what "Consolidate Library,,," does, is it? I'm afraid to try as that "This cannot be undone." is rather daunting.
Any help or suggestions would be very much appreciated. Fortunately, this won't affect my iPod as there's no way (yet) to put 120GB on a 60GB iPod!
MacBook Pro Intel Core Duo, 1 2.16GHz (Early 2006) Mac OS X (10.4.8)Hey,
I've been doing a similar thing recently. Have you tried importing either through home sharing on itunes or just transferring what you need by accessing the other MacBook if you mount it in your shared places? Takes a while wirelessly but should get it done..... I think! -
How do I consolidate an Itunes music library on two windows computers onto one windows computer?
Click here, pick the option which best fits your situation, open the larger library in iTunes, move the media files from the smaller one into the library in the open iTunes program window or the Automatically Add to iTunes folder, and then import the playlists. Any rented movies will only play on the computer they were originally downloaded to.
(126751) -
The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!
Hey there Luba_kalstad,
It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
And this section down toward the bottom if needed:
Unable to locate a Wi-Fi network
Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
Take care,
Sterling -
How can i add two values under the same property?
Hi all,
How can i add two values under the same property name in a
prop list? For example:
[question1: "item1","item2", question2: "item3","item4"]
To be more precise, i am creating a property list and I want
whenever a two values have the same property name to be added int
he list under the same property. For example:
gMyList.AddProp (#""&question&"" & x,
member("input").text)
question is a variable that is updated fromt he user's input.
Now, whenever somethign like this happens:
question = "question1"
member("input").text = "five"
question = "question1"
member("input").text = "six"
I want to output list to be:
[question1: "five","six"] and so on
Any ideas?Maybe you could make each property a list (so you have a
property list full
of lists), and add multiple values to the list held in a
particular
property?
Cheers
Richard Smith -
hi friends
using `n how can i add two empty line (two carriage return), between these two lines in the output file?
PS C:\> $env:COMPUTERNAME | add-content c:\file.txt
PS C:\> $Env:USERDOMAIN | add-content c:\file.txt
i tested "$env:computername`n`n`n$env:userdomain" | add-content c:\file.txt but it results in
myPCMyDomain
but i wanted the contents of the output file be like this:
MyPC
#empty line here
#empty line here
MyDomain
i tested many other forms but didn't work.
thanksI tried it, as well. The line breaks were respected in the PowerShell console, Programmer's Notepad, and Word; they weren't in Notepad.
You are using a Unicode file. Locale is what?
If you just want notepad compatible line breaks then do this:
del file.txt ; "$env:computername`r`n`r`n`r`n$env:userdomain" | add-content file.txt ;notepad file.txt
Look in hex to see that `n is ^L or 0xA and is only one character. CrLf is 0xD 0xA - two characters.
My programmers editors and VS all understand a single ^L as a line break so does PowerShell. Only DOS/Notepad and other utilitis don't understand this..
¯\_(ツ)_/¯ -
How can I combine two itunes accounts into one?
How can I combine two itunes accounts into one?
Items purchased from the iTunes Store are permanently associated with the account from which they were originally purchased. Apple provides no way to change this.
However, if you wish to put content from two accounts into a single iTunes library, you can easily do so. Use the command File > Add File (or Folder) to Library. -
How to make a two-way process to one-way process?
Hi,
How to make a two-way process to one-way process?
My requirement is:
1. I have developed an asynchronous BPEL process, and I am calling a PL/SQL procedure using a DB adapter.
2. The property "syncMaxWaitTime"=120 seconds in domain.xml.
3. The partner lnk is one-way operation and it takes more than 120 secons.
4. So my process throws TimeOut error and the transaction will be rolled back.
5. If the transaction is rolled back then the instance will not appear in the console.
6. The wired thing is the call to DB is actually doing the complete task successfully even it takes more than 120 sec.
7. Is there a way where I can handle this Timeout exception and bring the transaction to complete normailly?
What I am expecting a solution like [http://download-uk.oracle.com/docs/cd/B31017_01//integrate.1013/b28981/events.htm].
I tried this example, but in my process I am not getting onResult operation as my process is one-way process? Is there a way where I can make this a two-way operation, after taht I will try to use the Pick activity as shown in the above example.
--KhaleelHi Khaleel,
Please refer 122.DBAdapter/advanced/endToEnd/DirectSQLPerformance/README.txt in bpel/samples/tutorials.
See the "A-Sync to Synchronous " section to convert the asynchronous process initiated by DB adapter to a Synchronous process.
In your case the problem can be solved by creating a synchronous BPEL process and invoke the asynchronous process initiated by DB adapter in it. You can add the pick activity in the synchronous BPEL process to monitor the timeout.
Best Regards
Meenal Orkey -
How do I add mutiple horizontal submenus to one menu label.
For Muse, how do I add mutiple horizontal submenus to one menu label. In other words, I have Interior,Graphic and Web as one menu. Under Interior I want a horizontal submenu with Kitchens, bathrooms, closets,etc. Then under Kitchens I may want Bars, Islands and pantries.. Windows 7.
In plan view drag all of the pages you want in a submenu under the page you have set for the top level menu. So in your situation you would want kitchens, bathrooms, clostets etc under the interior page in plan view.
-
I designed my social media buttons. How do I add the link to each one. For example: How do I add my Facebook link to my facebook button on my muse site?
Hello,
Please select the button that you have created and go to hyperlink tab and add the facebook page URL there.
Please take a look at the screenshot below.
Regards
Vivek -
How can I have two itunes accounts on one computer?
How can I have two itunes accounts on one computer?
Not sure what you mean.
An account is a user name and password.
Sign into whichever account you want to use for purchasing.
Authorize the computer for both account to listen to the content. -
HOW DO I INSTALL TWO DIFFERENT ITUNES ON ONE COMPUTER
how do i install two itunes accounts on one computer using windows 7
By creating a second user account for the other person.
-
How can I add a stroke to only one side of text?
How can I add a stroke to only one side of text characters?
I'm probably misunderstanding what you want, so I'll just ask. Is this it?
-
How do I combine two iTunes accounts to one.?
How do I combine two iTunes accounts into one?
iTunes Account = Apple ID...
From Here http://support.apple.com/kb/HE37
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
Maybe you are looking for
-
Hi there I know this isnt really a Garagband question and possibly a little off GB topic, but in the end I will be using the midi file in Garageband so it kind of is I'm new to Midi recording so please bare with me. I am looking to do the following.
-
Hi, Does anyone know how how to add extra pages to template documents in the new version of Pages which carry over the same formatting, borders, styles etc? In iWorks09, all styles, borders etc just used to carry over to the next page. In the new Pag
-
Help me in instll NSU 1.4 Proooobleeeeeeem
help me in instll NSU 1.4 Proooobleeeeeeem hello users when install NSU 1.4 shuld install 1- Nokia Cable 2- Visual C++ 2005 Nokia Cable in Sucsess install but Visual c++ 2005 show me messege (( Command line option syntax error . type command /? for h
-
How to debug correlation?
Hi, the correlation I've set up doesn't seems to working, although I've done everything by the book. How can I debug the BPEL process to learn what happens with the correlation? I've looked at the visualisation of process in the EM console in debug m
-
I was reading around about ho to calibrate the Mac book Pro's battery so i followed what Apple said, so i was raining the battery till it was like 4% and i didn't get the alarm, i was wondering if maybe it was turned off. If i could turn it on how do