How do i adjust veritcal range on each channel of the 5105

I'm using a 5105 to capture 4 analog signals and 4 control signals that are at different levels.  Is it possible to configure the 5105 for different vertical ranges on each of the 8 channels?
Thanks

Thanks.  I think that's what I was looking for except the figures are no longer available so
I can't be sure.  The text sounds like what I was looking for.  An  NI engineer found the
following:
I would recommend taking a look at the two examples that I have included.
1. The first example shows how you can set the Vertical Range independently
for different channels by using an NI-SCOPE Property Node.
http://zone.ni.com/devzone/cda/epd/p/id/2085
2 . The second example shows how you can set the Vertical Range by using
two different niScope Configure Vertical.vi with a different channel name
going to each.
http://zone.ni.com/devzone/cda/epd/p/id/4017
thanks for your help.
Regards,

Similar Messages

  • I have a large number of photos imported into iPhoto with the dates wrong.  How can I adjust multiple photos (with varying dates) to the same, correct, date?

    I have a large number of photos imported into iPhoto with the dates wrong.  How can I adjust multiple photos (with varying dates) to the same, correct, date?

    If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter.  If that is the case then something is wrong with iPhoto or your perhaps your library.
    How large a date change are you putting in?  iPhoto currently has an issue with date changes beyond about 60 years at a time.  If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
    If that is not the case:
    Remove the following to the trash and restart the computer and try again:
    Home > Library > Caches > com.apple.iphoto
    Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
    ---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
    Let me know the results.

  • How can I adjust ADE so that I can see the entire page of a graphic novel (.epub)?

    How can I adjust ADE so that I can see the entire page of a graphic novel (.epub)?

    You can reduce or increase the font size of the page according to the way you like. Click on "Reading" under the Menu option -> "EPUB Text Size". Select appropriate font size from this option.
    Reduce or decrease the font size so that you can see the entire page.

  • How to make SubForm to repeat on each page of the PDF

    Hi all,
    I have an I-form, which "floats" on 2 or more pages. My problem is that I want to repeat a SubForms as a header(or a footer) on each page of the document. Any idea how can I do that.
    Many thanks in advance
    Z.
    Edited by: Zdravko Kalenderov on Oct 16, 2008 11:13 AM

    Hi,
       Yes ,If you want to display the same content in all body pages , you just design repeatable part in the master page.
    Thanks & Regards
    Manee

  • How to get multiple output formats for each execution of the report?

    Hi,
    Is it possible to get multiple output formats for each execution of the report? If so can you provide some details?
    Thanks

    In Reports 6i, Reports Distribution was introduced. This allows you to run the report once and output to a number of destinations with a different format. It also allows you to distribute individual sections within a report to different destinations in different formats.
    The Destinations for a Report to distribute to are defined either in a distribution file and passed on the command line or inside of the report definition.
    To add a destination to the the report definition, bring up the property palette against the report object and then select the "Distribution" property under the "Report" node. This will bring up a dialog that allows you to create a distribution list. You can then test this list by selecting "file->distribute" from the menu.
    To run a report that is to be distributed through rwrun60, you need to add "distribute=yes" to the command line. It will pick up the destinations from the report definition. If you add "destination=<filename>" then it will pick up the destinations from the specified "<filename>" and ignore the destinations in the report definition.
    Note: if "distribute=yes" is specified on the command line then the destype/desname/desformat parameters will be used to format the report (ie: which printer/display to use during formatting for sizing objects) but will be ignored when the report is sent to the destinations.

  • How do I adjust sound quality in itunes - sounds like the chipmonks in a tunnel

    I'm trying to listen to songs I purchased on itunes from my iPad/iPhone on my everyday PC - Compaq.  Never had a problem before!  Now all my music sounds like it's in a tunnel and Alvin of the Chipmonks is the lead singer in Alice in Chains !!  HELP I'VE TRIED EVERYTHING !!  Thank you

    You seem to be asking two separate questions here.
    1) Interfaces
    Interfaces start at around $30 and go into the thousands depoending on what you want to do, You need to define your needs first, then your budget
    Some example interfaces:
    http://www.thehangtime.com/gb/gbfaq2.html#interfaces
    2) How do I Mix and Master
    You'll need to read some books if you have no idea how to mix and/or Master.
    Mixing is making everythnig sound good together, and I have no idea how I could explain that other than to say "you change the levels of each track and add effects as desired, until you get thesound you want.
    Mastering is even harder to define, you'll really need to do some research (even online. There is PLENTY of info on the web).
    --HangTime [Will Compute for Food] B-)>

  • How to add a delete button on each row of the table.

    i create a table with a list , and i add a new column.
    and then i drag a delete botton from the list operation to the column.
    when i create several rows. and click any delete botton of the new created rows. all the new created rows will be deleted.
    rows that already exist when the page render are not influenced.and when i click these rows' delete botton,
    just the current row will be delete.
    that's because when i click the new created rows' delete botton,all the new created botton in this column will automatically be clicked.
    i think adf consider all the delete botton are the same one.
    is it the table bug? please tell me how to resolve this problem. thanks.
    Edited by: 917391 on 2012-3-21 下午6:53
    Edited by: 917391 on 2012-3-21 下午10:07
    Edited by: 917391 on 2012-3-21 下午10:16

    i don't use the adf BC, so it is not a VO. it's just a service method that return a list.
    and i create the datacontrol and drag it to the page.
    Edited by: 917391 on 2012-3-21 下午10:26

  • I have two ipad2's how can i load purchased apps to each ipad2 from the same itunes library?

    I have two iPad2's and I wish to load purchased apps from our iTunes library to our newest iPad2.  Can anyone direct me and or provide steps in completing this process?
    Thank you.
    texasboytn

    delete/uninstall the apps that your relative downloaded on you iPad. to do that tap and hold on and icon til it shakes, once its shaking downloaded apps will havee (X) mark on them on a red bubble, tap on it to delete

  • How to stop Firefox demanding authentication for each page of the same website (IE does not do this for the same site))

    I have a website (Still being developed but at the testing stage) which works fine in IE but when viewed in Firefox It insists on authentication at every page, instead of just one login it repeats the login at every page.

    Hi,
    If it's Basic auth, please check if this happens in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. If it's okay, you can later [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile?s=profile&r=1&e=sph&as=s copy the needed personal data] from the old profile. Firefox stores your personal data and settings in another location separate from its [http://kb.mozillazine.org/Installation_directory files/folder]. A new profile would have the default Firefox settings ('''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Options%20window '''Options'''], and [http://kb.mozillazine.org/About:config about:config] ), and usually would also be empty of any '''Extensions''' and themes ('''Appearance''') in Tools > Add-ons) and their settings. Also, a new profile would have no previous stored website data/settings etc., ('''Tools''' > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History '''Clear Recent History''']).
    [https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder & Files]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    For NTLM authentication, you can try to automatically trust the domain in the [http://kb.mozillazine.org/Network.automatic-ntlm-auth.trusted-uris network.automatic-ntlm-auth.trusted-uris] list in [http://kb.mozillazine.org/About:config about:config], eg. domain.com
    Not sure, but for Kerberos, I think you would have to use '''network.negotiate-auth.trusted-uris''' instead.

  • FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

    Hi there, 
    I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
    database using the fillby query. 
    It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
    each click of the fillby button. 
    also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered. 
    so actually 2 questions here: 
    1. how to populate a new row for each click of the fillby button 
    2. how to delete records from data grid view after an item has been entered 
    Thanks 
    Vishwas

    Hello,
    The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
    Some examples
    Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
    to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
    The following article with code shows this but does not address adapters.
    Conceptually speaking the code in the second code block shows how to get the new key
    Public Class Form1
    Private Sub StudentsBindingNavigatorSaveItem_Click(
    sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
    Me.Validate()
    Me.StudentsBindingSource.EndEdit()
    Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
    End Sub
    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
    'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
    Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
    End Sub
    Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
    Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
    End Sub
    Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
    Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
    End Sub
    End Class
    Get new key taken from
    this article.
    Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
    Dim Success As Boolean = True
    Try
    Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
    Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
    cmd.CommandText = InsertStatement
    cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
    cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
    cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
    cn.Open()
    cmd.ExecuteNonQuery()
    cmd.CommandText = "Select @@Identity"
    Identfier = CInt(cmd.ExecuteScalar)
    End Using
    End Using
    Catch ex As Exception
    Success = False
    End Try
    Return Success
    End Function
    In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
    Additional resources
    http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

  • Different configurat​ions for each channel

    Hello all,
    I am using Signal Express 3.0. My task is to acquire signals from 6 channels. In my signal processing I am using steps like filtering, tone extraction and data averaging.
    Is it possible to configure each channel with different parameters ?? for example 
    for channel 1 - max 10v, min-10v , filtering lowpass 10KHz, tone extraction-5KHz
    for channel 2-  max 5v ,  min-5v   , filtering highpass 30kHZ, tone extraction 35KHz
    for channel 3-  max 2v, min -2v, filtering lowpass 25KHz, tone extraction 20KHz
    Thanks 
    Vaidhin.

    Your success will depend upon your hardware. The biggest issue is that you want to take the data with different ranges on each channel. If your data acquisition device is simultaneously sampled, this is not a problem, since each channel will have independent amplifiers.  If your data acquisition device is scanned, the range will need to change at each data point, which will require a settling time, reducing the maximum rate you can take data.  If you are taking data slowly enough, and your device is fast enough, this is not a problem.  You can reduce the problem by minimizing the range changes and the amount of range change in your scan order.  Don't forget the finish to start transition.  Let us know what you are using and the parameters you want to run with and we can offer suggestions.  Please include both range and data acquisition rate for each channel.
    Once you have the data, analysis can easily be done on a per channel basis, so that should not be an issue.
    Good luck and let us know if you need more information.
    <shamelessPlug>I would also recommend you upgrade to SignalExpress 2012.  It is our best version yet and includes several features not found in 3.0 (e.g. zero offset).  Full disclosure: I am a National Instruments employee.</shamelessPlug>
    This account is no longer active. Contact ShadesOfGray for current posts and information.

  • Which is the best way to edit this program and make it read 1 sample from each channel?

    The original program was made with Traditional NI-DAQ. I have edit it to DAQmx the best that i could. The program it's already applying the voltages that are generate in the code(Daqmx Write.vi). But i'm having problems with acquiring voltages it's giving me rare readings(Daqmx Read.vi)  i don't know if i have to make a (Daqmx Start Task.vi) for each channel in the program or if i can make it work with a single one. Notice i have not make many significant changes because this program is already running in another lab and they give to us the program so we didn't have so much problems but instead of getting the BNC-2090 they got the BNC-2090A that uses DAQmx instead of Traditional. So anyone can help?
    Solved!
    Go to Solution.
    Attachments:
    2 Lock-In, 2 V Amp, Vd Amp - 090702(MTP).vi ‏100 KB
    2 Lock-In, 2 V Amp, Vd Amp - 090702(MTP)new.vi ‏107 KB

    A BNC-2090 is just a connector block.  It has no effect on whether you need to use DAQmx or traditional DAQ.  That is determined by the DAQ card you are connecting the terminal block too.
    You might be referring to this document Differences Between the BNC-2090 and BNC-2090A Connector Blocks, but that is just saying to the change in the labels of the terminal block to accurately reflect the newer DAQ cards.
    What problems are you having with the new VI you just posted?  Are you getting an erro rmessage?  I don't know what "rare readings" mean.
    You really shoud look at some DAQmx examples in the example finder.  Some problems you are having is that your DAQ blocks are all sort of disconnected.  Generally, you should be connecting the purple wire from your create task function, throught the start, read or write, and on to the close task.  Many of your DAQ functions are just sitting out there on little islands right now.  You should also be connecting up your error wires.
    With DAQmx, you should be combining all of your analog channels in a single task.  It should look something like Dev0/AI0..AI7.  Then use an N channel 1 sample DAQmx read to get an array of the readings, which you can then use index array to break apart.
    Other things you should do is replace the stacked sequence structures with flat sequence structures.  Turn on AutoGrow for some of your structures such as the loops.  In the end, you might find you can eliminate some sequence structures.

  • I'm sure this is a setting fix, but can't find it-.  All of my windows for mac programs open when I turn on my computer, such that I have to close each one individually to get to my desk top.  How do I adjust so none of them open unless I choose to?

    I'm sure this is a setting fix, but can't find it….  All of my windows for mac programs open when I turn on my computer, such that I have to close each one individually to get to my desk top.  How do I adjust so none of them open unless I choose to?

    Remove the check in the box "Reopen windows when logging back in":

  • How can i adjust the sound level customized for each browser tab?

    Hi,
    I'm kinda a new mac user. I want to know how i can adjust the sound level specifically for each browser tab or application the way you could do in windows.
    Thanks.

    Volume Mixer feature  that Windows has, is not available in OS X.
    Best.

  • How can I setup different number range for each company code?

    Dear GURU,
         Is it possible to setup different number range for material document by company code? If yes, what should i do.
         Thank you in advance.
    Thammarit

    Hi,
    you maintain the number assignment for the following documents:
    material documents
    physical inventory documents
    The number assignment for these documents is not to be confused with the number assignment for accounting documents . The number assignment for accounting documents depends on the document type which is allocated to the transaction.
    The number assignment for material documents and physical inventory documents depends on the transaction/event type which is also allocated to each transaction in Inventory Management. The transaction/event types are divided into groups of number ranges. A number range interval has to be defined for each group.
    You cannot change the transaction/event types. However, you can change the number range intervals or you can allocate transaction/event types to new groups.
    Caution: Change in the Fiscal Year
    If, at the time of a fiscal year change, you reset the number range in the new fiscal year, separate number range intervals for the previous year and for the current year must be maintained for one month to allow postings to the prior period.
    Example:
    Interval for 1995: 4900000000 to 4999999999 status: 4900451234
    Interval for 1996: 4900000000 to 4999999999 status: 4900000000
    If only one number range interval exists for both years and you make any postings to the previous period, the system will assign numbers that already exist in the previous year. This would lead to an update termination.
    In the standard system, the transaction/event types and number range intervals are preset for Inventory Management as follows:
    Physical inventory documents
    Number range interval from 0100000000 to 0199999999
    This group contains the following transaction/event types:
    - IB Physical inventory documents
    - ID Physical inventory documents for counts and differences
    without reference
    - IN Physical inventory documents for recounts
    - IZ Physical inventory documents for count without reference
    - WV Physical inventory documents for difference postings in the WM System
    Material documents for goods movements and inventory differences
    Number range interval from 4900000000 to 4999999999
    This group contains the following transaction/event types:
    - WA Goods issues, transfer postings, other goods receipts
    - WH Goods movements for handling units (HU)
    - WI Material documents for inventory adjustment postings
    - WL Goods issues for delivery documents (SD)
    - WQ Goods movements for usage decisions (QM)
    - WR Goods movements for completion confirmations (PP)
    - WS Goods movements for run schedule headers (PP)
    - WZ Documents for batch status changes
    Material documents for goods receipts
    Number range interval from 5000000000 to 5999999999
    This group contains the following transaction/event types:
    - WE Goods receipts for purchase orders
    - WF Goods receipts for production orders
    - WO Subsequent adjustment of subcontract orders
    - WW Subsequent adjustment of active ingredient materials
    Inventory sampling numbers
    Number range interval from 0200000000 to 0299999999
    This group contains the transaction/event type SI.
    SAP recommends that you accept the settings defined in the standard system. In this case, no action is required on your part.
    Note
    For performance reasons, 10 document numbers are buffered on the application server. In this way, gaps in number assignment can occur.
    Actions
    Check whether you can use the predefined groups and number intervals.
    If you want to change any groups, proceed as follows:
    a) Choose Group -> Maintain.
    b) Select the transaction/event type that you want to re-allocate.
    c) Place the cursor on the new group and choose Edit -> Assign element group).
    d) Save your settings.
    If you want to define new groups, proceed as follows:
    a) Select Group -> Maintain.
    b) Then select Group -> Insert.
    c) Enter a text for the number range group.
    d) Maintain the number interval for this number range group.
    e) Allocate the transaction/event types to the number range groups (see step 2).
    If you want to maintain new number range intervals for an existing group, proceed as follows:
    a) Choose Group -> Maintain.
    b) Select a group and choose Interval -> Maintain.
    c) Choose Edit -> Insert year.
    d) Maintain the number interval for the new fiscal year.
    If you do not want to use the year-related number assignment method, enter 9999 in the field Year.
    Note on transport
    You transport number range objects as follows:
    In the initial screen, choose Interval -> Transport.
    Note that all intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export.
    Dependent tables are not transported or converted.
    Thanks and regards
    Rajesh

Maybe you are looking for