How do I assign the value of a Boilerplate Text Object to a Placeholder Column?

I have a Boiler plate File Link. This references a .txt file. I want to generate XML tags for it.
Is it possible to read the content of the file link object into a Placeholder column so that I can get a tag generated for that?

Hi Frank,
The key is already passed from a previous page. To set the scene a little, I have three pages:
1. Project list, has a table listing all projects.
2. Drill down to tasks for a project, passing the project key as a page property. This is a master/detail page. This currently works well.
3. Create a new task for the project from page 2. I want to pass the project key obtained from page 1 to page 3 via page 2, so that the user does not have to re-select a project when creating a task.
Here is my registrydef from page 2 (the tasks for a project):
<bc4j:rootAppModuleDef name="ProjectModule"
defFullName="ProjectPackage.ProjectModule"
configName="ProjectModuleLocal"
releaseMode="stateful">
<bc4j:viewObjectDef name="ProjectsVO1">
<bc4j:rowDef name="ProjectRow" autoCreate="false" usesCurrency="true">
<bc4j:propertyKey name="key"/>
</bc4j:rowDef>
</bc4j:viewObjectDef>
<bc4j:viewObjectDef name="TasksVO2" rangeSize="20"/>
</bc4j:rootAppModuleDef>
This works well, I can display the selected project and then list the tasks in a table.
My problem is that in page 2 the project record is not in a table, so I cannot use a table selection mechanism to set the key value in the event which calls page 3 (see my earlier post for this code). As the key that I need is sittng there in the URL as a page property, I want to pass that instead. How to I reference it from within an event?
Does this make sense or is there a better way of doing it? Do I actually need a new page to create a new task - I don't think I can add new records in a table!
Thanks for the tip on ctrl: , I'm slowly getting the hang of the namespace thing.
Steve

Similar Messages

How can I query the rendered width of a text object

Does anyone know of a way to query the rendered width of a bound field object. We are using a proportional font (Times New Roman) and need to figure out, how wide the output is going to be. Thank you!

Hi Niall, thanks again. I am currently working on a project where we convert Crystal Reports
documents to LiveCycle Production Print with the goal of creating the exact same output in
LiveCycle as it was produced in Crystal Reports.
We define a field in LiveCycle with the exact same properties for width, height, font, font size etc. as
it is defined in Crystal Reports.
When we populate the field with data that exceeds the defined width of the field, the data gets cut
off at a different position than in Crystal Reports, sometimes even in the middle of a character.
If I could query the length of the rendered output, I could shorten the input data until the rendered
output would fit in the field.

How to get the value of an input text in a table

all,
i have an adf table component on my jsf page and i added an input text component to one of the table columns. how do i access the value of that input text in my backing bean? normally, i would just do a getValue(), but because the input text is in the table i'm assuming it has to be treated as an array somehow.
any help would be appreciated,
paul
btw. jdev 10.1.3

Frank,
I found a solution to fetching the column values. I created a transient attribute on my view object and bound my column to the transient attribute. Then I used this post from Duncan Mills
http://groundside.com/blog/DuncanMills.php?title=adf_validation_context_in_a_jsf_table&more=1&c=1&tb=1&pb=1
to get to the data by looping through the table rows.
However, I'd still like to use the value from this transient attribute in logic to populate some other columns in the table. I
for example, here's the content of what's submitted:
name phone transient
==== ===== =======
paul null 555
mary null 444
In my backing bean I'd like to get the rows from the table and read the value of the transient attribute, pass it through a function, and set the value of the column phone to some value for each row. Then have that processed to update the db. Is this possible?
Thanks,
Paul

How to assign the Value to the Particular field-Text field

Hi all,
My requirement is to call the Web service with input from the ADF page.
Steps I have done:
1. I have created a Web service data control based on the WSDL file.
2. Just drag and drop the Process, It is automatically created the form with the Input fields and then the Process button
3. When I entered the values and then process button it will pass the values corretly.the web service is invoked correctly with the values entered.
4. But when I try to assign the value from the some other field that is not working.
I am assigning the Value to the field by go to the properties of the Particular field value =”CREATE”
When I do like this that value is showing in the screen. But it will not pass the value to the web service.
I think the value is only displaying in the screen. Not stored at bindings level. Kindly guide me in this.
Thanks in Advance
C.Karukkuvel

If you want to have the value that is returned displayed in a field that has binding to another item and not the WS result item then the way to do this would be to override the method that is invoked with the button that calls the web service - you then take the result and assign it to the item you want.
See the way it is done here:
http://blogs.oracle.com/shay/2009/07/java_class_data_control_and_ad.html
While this sample uses a simple method it would be basically the same for a Web service.

How can i pass the value one from to another form?

hi all
how can i pass the value one from to another form with out use it when ever i want to needed this value that ican useit?
like i have two fields U_test1 and U_test2 table name @AUSR
that i have four form A! , A2,A3,A4 please tell me in details....?

Hi,
U can assign the values to some variables and access then in ur required forms.
Vasu Natari.

I want to assign the value of a Javascript variable to JSP Variable

I want to assign the value of a Javascript variable to JSP Variable .. for example :
<%
Bla Bla Bla
%>
<script>
var JavaScriptVariable="hello"
</script>
<%
String JSPVariable=// The Value of JavaScriptVariable ;
%>
How can i do that ??
Thanks

>I want to assign the value of a Javascript variable to JSP Variable
cannot be done.Friend try to understand concepts properly Javascript is always excuted by the browser @clientside where as JSPCode is executed Websever(ServletContainer) @serverside.Through you are combining JSP Code blocks(Tags,Expressions,scriptlets...) & javascript under a single page webserver can only identify what is their under JSP Code blocks.
Hope this could be an appropriate answer for your question.
However,you can as well submit a request by encoding your URL with request parameters and the submit to the page and then collect it using request.getParameter(name).
But under a single context state it is not possible
REGARDS,
RaHuL

Assign the values to Var

How to assign the values to variable in SQL
Thanks

SQL> variable var number
SQL> exec :var := 10
PL/SQL procedure successfully completed.
SQL> select :var as val from dual;
       VAL
        10
1 row selected.
edit
And/or:
SQL> begin
2 select 20 into :var from dual;
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> select :var as val from dual;
       VAL
        20
1 row selected.Edited by: hoek on Jan 5, 2010 3:26 PM
edit II
Actually Oracle has everything documented @ http://tahiti.oracle.com including lots of examples.
For instance: http://www.oracle.com/pls/db112/ranked?word=variables&partno=e10823
Edited by: hoek on Jan 5, 2010 3:28 PM

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

Please, How do i get the values from a h:selectManyCheckbox ?

How do i get the values (selected or not) of a <h:selectManyCheckbox> tag and show them .For instance
i have the folowing options :
<h:selectManyCheckbox
                       id="cartas"
                   layout="pageDirection"
                    value="#{store.cartas}">
      <f:selectItems
                    value="#{cartas}"/>
    </h:selectManyCheckbox>
    <h:message styleClass="validationMessage" for="newsletters"/>with my faces-config.xml:
<managed-bean>
    <description></description>
    <managed-bean-name>cartas</managed-bean-name>
    <managed-bean-class>java.util.ArrayList</managed-bean-class>
    <managed-bean-scope>application</managed-bean-scope>
    <list-entries>
      <value-class>javax.faces.model.SelectItem</value-class>
      <value>#{cartas0}</value>
      <value>#{cartas1}</value>
      <value>#{cartas2}</value>
      <value>#{cartas3}</value>
    </list-entries>
</managed-bean>
<managed-bean>
    <managed-bean-name>cartas0</managed-bean-name>
    <managed-bean-class>javax.faces.model.SelectItem</managed-bean-class>
    <managed-bean-scope>none</managed-bean-scope>
    <managed-property>
      <property-name>label</property-name>
      <value>Semanal</value>
    </managed-property>
    <managed-property>
      <property-name>value</property-name>
      <value>200</value>
    </managed-property>
</managed-bean>
<managed-bean>
    <managed-bean-name>cartas1</managed-bean-name>
    <managed-bean-class>javax.faces.model.SelectItem</managed-bean-class>
    <managed-bean-scope>none</managed-bean-scope>
    <managed-property>
      <property-name>label</property-name>
      <value>As bruxas</value>
    </managed-property>
    <managed-property>
      <property-name>value</property-name>
      <value>201</value>
    </managed-property>
</managed-bean>
<managed-bean>
    <managed-bean-name>cartas2</managed-bean-name>
    <managed-bean-class>javax.faces.model.SelectItem</managed-bean-class>
    <managed-bean-scope>none</managed-bean-scope>
    <managed-property>
      <property-name>label</property-name>
      <value>Exercise</value>
    </managed-property>
    <managed-property>
      <property-name>value</property-name>
      <value>202</value>
    </managed-property>
</managed-bean>
<managed-bean>
    <managed-bean-name>cartas3</managed-bean-name>
    <managed-bean-class>javax.faces.model.SelectItem</managed-bean-class>
    <managed-bean-scope>none</managed-bean-scope>
    <managed-property>
      <property-name>label</property-name>
      <value>Gusman Park</value>
    </managed-property>
    <managed-property>
      <property-name>value</property-name>
      <value>203</value>
    </managed-property>
</managed-bean>Thanks for the atention!! All the best!!

Hi,
In your backing bean you will need to add a new variable to bind your control to, I think this variable needs to be of teh "HtmlSelectManyCheckbox" type. The on your jsp page you can add binding="#{myBean.myVariable}".
When you want to get the values of the selectMany in your backing bean, you can call the getSelectedValues() function on your HtmlSelectManyCheckbox variable.
in backing bean:
private HtmlSelectManyCheckbox hsmc;
public HtmlSelectManyCheckbox getHsmc(){
    return hsmc;
public void setHsmc(HtmlSelectManyCheckbox hsmc){
    this.hsmc = hsmc;
public void someFunction(){
   Object[] obs = hsmc.getSelectedValues();
}On jsp page:
<h:selectManyCheckbox
                       id="cartas"
                   layout="pageDirection"
                    value="#{store.cartas}"
                     binding="#(myBean.hsmc}">
      <f:selectItems
                    value="#{cartas}"/>
    </h:selectManyCheckbox>

How we can get the values from one screen to another screen?

hi guru's.
how we can get the values from one screen to another screen?
we get values where cusor is placed but in my requirement i want to get to field values from one screen to another screen.
regards.
satheesh.

Just think of dynpros as windows into the global memory of your program... so if you want the value of a field on dynpro 1234 to appear on dynpro 2345, then just pop the value into a global variable (i.e. one defined in your top include), and you will be able to see it in your second dynpro (assuming you make the field formats etc the same on both screens!).

How do I get the values from a form?

How do I get the values from a form?

You can try using request method..
request.getParameter("yourFormInputName");
Try this.

How to get all the values in one column of a JTable

How to get all the values in one column of a JTable as a Collection of String.
I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column.

I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column. You could always write a custom TableModel that stores the data in the format you want it. It would probably be about 50 lines of code. Or you could write a loop in 3 lines of code. I'll let you decide which approach you want to take.

How to get all the values of the SDO_ORDINATE_ARRAY of a Oriented Point

Hi,
I'm trying to get the values of a Geometry wich is an Oriented Point. To that, i'm using SDO_UTIL.GETVERTICES, but this utility only obtains the point X,Y, it doesn't obtain the values of the orientation vector.
The Geometry is this:
MDSYS.SDO_GEOMETRY(
     2001,8307,NULL,
     MDSYS.SDO_ELEM_INFO_ARRAY(1,1,1,3,1,0),
     MDSYS.SDO_ORDINATE_ARRAY(-75.586088632813272,6.1794352615514194,0.57278169530235967,-0.81970795380217887,0)
The query is this:
SELECT c.ipid, c.nombre, t.X, t.Y, t.Z, t.W
FROM Hidrantes c,
TABLE(SDO_UTIL.GETVERTICES(c.geometria)) t
where c.ipid = 4691117
ORDER BY c.ipid, t.id;
Result:
4691117          -75,5860886328133     6,17943526155142          (null) (null)
As you can see, it only obtains the X,Y values but not the values of the orientation vector, how can I get the values?.
Thanks in advance

Tobonale,
Sql-Only approaches:
*[1] Return Oridinate Array*
Append .SDO_ORDINATES to your geometry object or column name:
SELECT MDSYS.SDO_GEOMETRY(
     2001,8307,NULL,
     MDSYS.SDO_ELEM_INFO_ARRAY(1,1,1,3,1,0),
     MDSYS.SDO_ORDINATE_ARRAY(-75.586088632813272,6.1794352615514194,0.57278169530235967,-0.81970795380217887,0)
).SDO_ORDINATES
FROM dualResult:
SDO_ORDINATE_ARRAY(-75.586089, 6.17943526, .572781695, -.81970795, 0)*[2] Return Flattened Oradinate Array*
SELECT * FROM
TABLE (
     MDSYS.SDO_GEOMETRY(
     2001,8307,NULL,
     MDSYS.SDO_ELEM_INFO_ARRAY(1,1,1,3,1,0),
     MDSYS.SDO_ORDINATE_ARRAY(-75.586088632813272,6.1794352615514194,0.57278169530235967,-0.81970795380217887,0)).SDO_ORDINATES
)Result:
-75.586089
6.17943526
.572781695
-.81970795
           0Regards,
Noel

How to get all the values of a variable with F4 with checkboxes to select

Dear Experts,
After Executing a query by giving let 3 values(Out of 10 Values) to a variable.
To give 2 more input values to the same variable(i.e.,total I wanted to give 5 inputs this time ),after refreshing the query,for that variable if I click F4, I am seeing the historical values(i.e.,3) and remaining 7 values also But with out any Check Boxes besides them to select the 2 inputs.
In the same F4 Screen, If I click all values(an Icon at The bottom),then also Im seeing but no check Box.
I hve tried by deleting the Delete Personalization also,but no use.
Please tell me How to get all the values with F4 with check boxes to select ,whatever I want??
Thanks in advance

Take a look at the InfoObject and go to the Business Explorer tab. If the 'Query Def. Filter Value Selection' is set to 'Only Values in InfoProvider', you're only going to get the values in F4 that exist in the InfoProvider, not everything in the Master Data. This would need to be changed to the value of 'Values in Master Data Table' if you want it to show everything possible when F4 is chosen.
Likewise, you're going to need to look at the query and go to the Advanced tab for the InfoObject. Make sure that the radio button for 'Values in Master Data Table' is selected. If not, then you should change that selection.

How do I assign the value of a Boilerplate Text Object to a Placeholder Column?

Similar Messages

Maybe you are looking for