How do I automatically save array data to a spreadsheet?

I am setting up a 24 hour test where I would like the gathered array data to automatically save to a spreadsheet every 4 hours. Is there a way to set this up with the Write to Spreadsheet file.vi?
Solved!
Go to Solution.

Sure, you just need a timer that will tell you when the 4 hours are up. Take a look at the attached timer, I picked it up on these forums a while ago but I cant remeber who to give credit to for it*. Just use this timer to trigger a case structure holding the write to spreadsheet function.
*It is from Bloomy controls
Message Edited by jmcbee on 03-17-2009 09:39 AM
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
Attachments:
Interval Timer.vi ‏21 KB
Delta Time.vi ‏22 KB

Similar Messages

How system will automatically populate clearing date field for invoices paid similar to when payments are made to the vendors

Hi SAP Gurus,
Could you help me on this, How system will automatically populate clearing date field for invoices paid similar to when payments are made to the vendors.
Regards
Mohan

Hi Ramakrishnappa,
If you clear the invoice against payment, then the invoice clearing date would be payment document posting date.
Regards,
Mukthar

How to modify and save the data in the table control

how to modify and save the data in the table control

hi priya,
kindly go thru the code below.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
    MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_cancel AT EXIT-COMMAND.
LOOP WITH CONTROL tab_control.
    MODULE move_data_from_table.
ENDLOOP.
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to *the table control
*zmpets_mode-modecode, zmpets_range-rangeid, *zmpets_servfacto-factor are field names of the table *control columns.
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
    zmpets_mode-modecode = int_factor-modecode.
    zmpets_range-rangeid = int_factor-rangeid.
    zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE.                 " move_data_to_table OUTPUT
**********************************************8888
MODULE move_data_from_table INPUT.
*To move the data from the table control to internal *table 'INT_FACTOR'.
int_factor-chk = line.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
   MODIFY int_factor INDEX tab_control-current_line.
    IF sy-subrc NE 0.
      APPEND int_factor.
      CLEAR int_factor.
    ENDIF.
ENDMODULE.                 " move_data_from_table INPUT
if this helps , kindly award points.
for any clarification just mail me.
regards,
Anversha.S
[email protected]

How to create a Date or time field that automatically saves current date or time?

hello,
i want to know that how to create a Date/Time field that automatically shows current Date/Time when .pdf form is opened.
also want to how to stop user to give input in Date/Time field
currently im putting a Date field but it is accepting user input.
hoping for quick response
Thanks in advance!

You can place the below code in the initialize event of the field to display the current date and time.
Set the language to FormCalc.
You can play around the formats to get the desired format of date and time.
if($.rawValue eq null or $.rawValue eq "") then
$.rawValue = Concat(Num2Date(Date(), "MM/DD/YYYY")," ", Num2Time(Time(), "h:MM:SS A"));
endif
You can not restrict the input area in Date time field instead you can validate the input while existing the field.
(OR) set the field to either readOnly or protected mode.
Thanks
Srini

How to supress automatic save ..

Hi,
Ours is a Siebel 8.0. We have a requirement to implement a UI workflow for our users to
(1) dis-allow or suppress automatic save of a record (say, Opportunity or Activity) when user creates a new record or updates an existing one
(2) when user steps off the applet after an attempted creation or update, prompt him/her to hit a SAVE (or similar) button to initiate the record save (CREATE or UPDATE).
I'm sure this is a common requirement from many companies where they are used to the SAVE functionality.
Any thoughts on how to go about this one, will be greatly appreciated.
Thanks in advance.
Albert

Hi Albert,
Here are the steps you might want to take to resolve this issue, remember the solution is bassed on scricpting.
1. Create a "Save" button on applet
2. On Applets PreInvokeMethod event write the following code to set the profile attribute for the method invoked by button
     if (MethodName == "SaveRec")
          TheApplication().SetProfileAttr("SaveRec","Y");
          return(CancelOperation);
3. On BC'c PreWriteRecord event write the following code
if (TheApplication().GetProfileAttr("SaveRec")!= "Y")
          TheApplication().RaiseErrorText("Please click on Save Rec Button to save your changes");
          return(CancelOperation);
else
     return (ContinueOperation);
4. Now on BC's WriteRecord event write the following code to reset the profile attribute
TheApplication().SetProfileAttr("SaveRec","N");
5. Compile your changes and test throughly.
Hope this helps.
Regards
Chetan Sethi

HT2500 how do i automatically save all emails after i have read them

How do I set up Mail to automatically save all emails that I have read?

Unless Mail has changed in Mountain Lion, which I don't use, you shouldn't have to do anything. They should just remain where they were. Are they disappearing after being read?
Maybe there's some Preference in 10.8 Mail I don't know about. In my 10.6 Mail, I would Open>Mail>Preferences>Accounts>Mailbox Behaviors. Should be at that location in ML Mail>Preferences or somewhere in Preferences.
Btw, you're in the Snow Leopard (10.6) forum.

How can I automatically save as a jpg layer groups?(layer group jpg)

Has created a 10 layer groups in Photoshop (there are multiple layers in the group layer.)
10 Photoshop layer groups
I try to save the JPG file to 10.
How can I batch or automatically save?

Just so you are aware, jpg does not support layers. However there is a script actually two scripts that can take the layers and create individual files.
File>Scripts>Layer Comp to Files
File>Scripts>Export Layers to Files
The former requires you to use layer comps which is a way of creating sets of layers to create a comp. The latter is just as it says.
But as I said anything saved as a jpg will be a single layer with no transparency.
Psd and tiff are the only two that should be used for multiple layers and transparency. There are other formats that support transparency, but is not the scope of this thread. At least for now.

How to calculate and save planning data in bex input-ready query using keyfigures for calculation from different infoproviders

Hi Dear All,
We have two real time infocubes and two aggregation levels based on these cubes in one multiprovider
first cube1 is like
char1| char2| keyfig_coefficient(single value for each combination of char1 and char2)
same aggregation level1
(we have input query to fill coefficients by one responsible user)
second cube2 is like
char1| char2| keyfig_quantity| keyfig_result
same aggregation level2
Input ready query should be like (for all other users of different org units)
char1|char2|keyfig_coeff| keyfig_quant(for input) | keyfig_result = keyfig_coeff*keyfig_quant(calculated value, should be saved to cube2)
And we don't have pregenerated lines in cube2, users have to add new lines themselves by wad.
Question is, what is the optimal (easiest) way to make calculation and save result data to cube2 where keyfigures for calculation should be used from different infoproviders. I need just a hint.
Appreciate any help.
Nadya.

I found decision, agregation levels sould be based on multiprovider, not included.

How do I automatically save the config of an ASA every day?

Is it possible to automatically save the config files of an ASA to a central server on the network? We have a unix machine with syslog and snmp running.
Thx,
Marc

You can pull the config via SNMP WRITE which can be dangerous. There are commercial/open source tools that will go out grab the config. Search keyword cisco at sorceforge for some of the open source tools. For commercial tools, take a look at www.solarwinds.com.
Hope it helps.

Busted mac - how to retrive and save my data?

Hi Hope someone can help -
My Mac has gone belly up recently. It starts up in the grey screen with an apple logo and a spinning disc before moving onto a blue screen (with occasional spinning wheel). I can move the mouse cursor in the blue screen.
Note - There is only 7gb of free space left on the hard drive.
I’ve tried many different options to get back into the mac including –
1. Trying to boot into safe mode – fails to do so.
2. Tried holding down the S key while booting up – no joy here either.
3. Holding down cmd-S to get into the UNIX command line – this was successful and I can see all my files and directories.
4. Cmd-C and running from the original OS-X install disc. From here I was able to run the disc utility but it reported no problems with the hard disc. I can also see the various files and directories from here. But I cannot see any way to copy/save my data using this option.
It’s been reported elsewhere that the above problem might be caused by the logic board failing, so re-installing the OS may be pointless, correct? And anyway a full re-install will wipe all my data. So at this point it looks like saving my mac might be a wasted effort, so my main emphasis is now on retrieving my data.
Perhaps someone might be able to help with the following (I’m fairly comfortable with using UNIX, but not an expert).
1. Could I copy the necessary files onto an external hard disc using Unix CP command if I simply attached another external hard disc to the mac?
2. Or could I simply cp my files to an external DVD re-writer drive from the UNIX command line? If so what would be the command to do so?
3. Any other options/suggestions?

Hi, I hope we can help as well.
Okay so your first concern is your data. Go and purchase an external hard drive that is at least twice as big as you think you will need. We'll use it to 1) Create a boot disk and 2) Put any data you can save in a safe place. After we are done, you'll use this external hard drive for backing up your data on a regular basis, so you won't need to worry about this nearly as much again. If you really want to be safe, get two external drives and back up your backup.
Boot the iMac from its install DVD. Use *Disk Utility* to format the external drive. Install the OS on it. Restart, booting from the system on the external drive. Copy your data from the internal hard drive to the external. You can use the *Migration Assistant* (in /Applications/Utilities) the UNIX cp command, a program called Carbon Copy Cloner, or any of several other methods. At this point you can also use the Finder to make a copy of critical files to DVD(s).
Once you have your data safe, shut down the iMac and disconnect the external hard drive. Reboot starting from the install disk again. Use the installer to do an *Archive and Install* of the operating system, preserving user and network settings. See [this article|http://support.apple.com/kb/HT1710] for further information about A and I.
If the Archive and Install works, you should be able to restart the computer and have it be working again. Reconnect your external hard drive and use it with [Time Machine|http://www.apple.com/support/leopard/timemachine> to maintain current backups for the future.
If all of the above fail, let us know, we'll keep working with you.
Best of luck.

How can I automatically insert a date in Pages for my Ipad

Is there any way to automatically insert the current date in a letter using Pages for the IPad? If so how?

It is no possible.
An alternative is to create a Page file with password in Pages for Mac, and save it to iCloud, then open it on the iPad using the password in iCloud.

Save array data

Hi all,
I need help to solve a problem like following.
I have a table 'results' with the columns
result_id number PK
method varchar2(200)
readout varchar2(60)
result number
Also I have built a page with an array (realized through text fields) like this one:
x1_1 x1_2
x2_1 x2_2
x3_1 x3_2
x100_1 x100_2
All elements in the array have the same method. In column readout the name of the array element has to be stored. The input of the text fields have to be stored in column result.
I think an example makes it more clearly
method = malinoe
x1_1 = 15 x1_2 = 9
x2_1 = 3 x2_2 = 7
x3_1 = 10 x3_2 = 11
x100_1 = 2 x100_2 = 3
After fill in the values into the text field array you have to click the Button 'SAVE' and all values have to be stored in the table results:
first row:
result_id = 1
method = malinoe
readout = x1_1
result = 15
second row:
result_id = 2
method = malinoe
readout = x1_2
result = 9
third row:
result_id = 3
method = malinoe
readout = x2_1
result = 3
last row:
result_id = 200
method = malinoe
readout = x100_2
result = 3
Has anybody an working example or idea how I can solve this problem?
Thanks for help,
ben
Message was edited by:
ben512

I think that here is the best approach htmldb_collection.
On load form fill the text items with data.
On save fill the collection elements and then iterating through them save them in table.
Here is QBE code for iteratiting through forms controls and if some control has name P||PAGE_ID_FIELD_NAME then this is ok control...Use just the logic of iteration through form items.
Here is example from my source code:
FUNCTION QBE (
        ln_page_id     NUMBER
      , ls_table    IN VARCHAR2
      , ls_select   IN VARCHAR2 DEFAULT NULL
      , ls_where    IN VARCHAR2 DEFAULT NULL
      , ls_order_by IN VARCHAR2 DEFAULT NULL
      , ln_search_type NUMBER   DEFAULT 3
      , ls_scope_mode VARCHAR DEFAULT 'U'
          ) RETURN VARCHAR2
   AS
     wrong_search_type EXCEPTION;
     wrong_date_field EXCEPTION;
     wrong_scope_mode EXCEPTION;
    ls_sql       VARCHAR2 (32567 CHAR);
    lb_need_and BOOLEAN := FALSE;
    lb_has_where BOOLEAN := FALSE;
    ls_field_name VARCHAR2 (128);
    lb_process_current_field BOOLEAN;
    lb_is_date_field BOOLEAN;
    -- lb_is_date_time_field BOOLEAN;
    lb_is_number_field BOOLEAN;
    lb_is_LOV BOOLEAN;
    lb_is_date_from BOOLEAN;
    c_collection VARCHAR2(32 CHAR) := 'DATE_USED_FROM';
   BEGIN
     HTMLDB_COLLECTION.CREATE_OR_TRUNCATE_COLLECTION (c_collection);
     IF ls_scope_mode NOT IN ('U','A') THEN
       RAISE wrong_scope_mode;
     END IF;
      -- Create SELECT part of SQL Statement
      IF (ls_select IS NOT NULL) THEN
        ls_sql := ls_select;
      ELSE
        ls_sql := 'SELECT *';
      END IF;
      -- Create WHERE part of SQL Statement
      IF (ls_where IS NOT NULL) THEN
        ls_sql := ls_sql || ' from ' || ls_table || ' ' || ls_where || ' and ';
      ELSE
        ls_sql := ls_sql || ' from ' || ls_table || ' where ';
      END IF;
      -- Loop through each column in the table specified in ls_table and see if there is a corresponding
      --   HTML DB page item on the page specified in ln_page_id
      FOR x IN (SELECT column_name, data_type FROM USER_TAB_COLUMNS WHERE table_name = UPPER(ls_table) AND ls_scope_mode = 'U'
                UNION
                SELECT column_name, data_type FROM ALL_TAB_COLUMNS WHERE table_name = UPPER(ls_table) AND ls_scope_mode = 'A') LOOP
        lb_is_date_field := FALSE;
        lb_is_number_field := FALSE;
        --lb_is_date_time_field := FALSE;
        ls_field_name := 'P' || ln_page_id || '_' || x.column_name;
        <<PLAY_IT_AGAIN_SAM>>
        IF x.data_type = 'DATE' THEN
          lb_is_date_field := TRUE;
          ls_field_name := 'P' || ln_page_id || '_' || x.column_name|| '_FROM';
          lb_process_current_field := TRUE;
          lb_is_date_from := TRUE;
          FOR j IN (SELECT c001 FROM htmldb_collections WHERE collection_name = c_collection) LOOP
            IF j.C001 = ls_field_name THEN
              lb_process_current_field := FALSE;
              EXIT;
            END IF;
          END LOOP;
          IF lb_process_current_field THEN
             HTMLDB_COLLECTION.ADD_MEMBER (p_collection_name => c_collection
                                         , p_c001            => ls_field_name
                                         , p_generate_md5    => 'NO');
          ELSE
            ls_field_name := 'P' || ln_page_id || '_' || x.column_name|| '_TO';
            lb_process_current_field := TRUE;
            lb_is_date_from := FALSE;
                 FOR j IN (SELECT c001 FROM htmldb_collections WHERE collection_name = c_collection) LOOP
                   IF j.C001 = ls_field_name THEN
                     lb_process_current_field := FALSE;
                     EXIT;
                   END IF;
                 END LOOP;
             IF lb_process_current_field THEN
                HTMLDB_COLLECTION.ADD_MEMBER (p_collection_name => c_collection
                                            , p_c001            => ls_field_name
                                            , p_generate_md5    => 'NO');
             END IF;
          END IF;
          lb_process_current_field := V(ls_field_name) IS NOT NULL;
        ELSIF IS_NUMBER (V(ls_field_name) ) THEN
          lb_process_current_field := (V(ls_field_name) != -100);
          lb_is_number_field := TRUE;
        ELSE -- ovo je za sve ostale!
          lb_process_current_field := (V(ls_field_name) IS NOT NULL) AND NOT (V(ls_field_name) IN ('-100','%null%','null'));
        END IF;
        IF lb_process_current_field THEN
           .... then do your work....Of course you must obey naming convention - what I can see you have done that so your control name is like:
x1_1 xi_2.
Hope this helps

How to Read and write array data into notepad or lvm?

Hello,
I am new to Labview and i wanted to use it in my project where i get accelerometer values X,Y and Z serially into a notepad and then displaying those values in Labview as a 3D plot or graph.The problem i am facing is the use of Cover to dynamic data express VI and how to save the array in a notepad or a lvm file.i was testing a basic block of building x and y values separately.was successful in plotting it to graph but dont know how to save those values in a file.Can some1 please help me out in his ??
Solved!
Go to Solution.
Attachments:
Capture.PNG ‏22 KB

Thank you for looking into this. Since I was converting into dynamic data before writing it I thought you have to convert it after reading but then I got stuck as to whether build the array again so as to display it in the graph. Dennis I did what you said and the graph on reading is a bit funny just started today and I am kinda skipping the long tutorial due to shortage of time. sorry
Attachments:
Capture.PNG ‏32 KB
Capture2.PNG ‏59 KB

How do I transfer/save/keep data,documents,notes etc from icloud to my iphone?

Ok, so here's the deal. In my old iphone I was using an apple id (let's call this one X) for icloud, and my notes, "pages" documents etc were being stored there.
However, I recently bought a new iphone and had to stop using this icloud id (long story, no need to analyze) and create another one (let's call this one Y). So I'm still using apple id X for everything else (itunes, app store etc) but for icloud I use apple id Y.
The problem that occurs is that everything that was stored to icloud when I was using apple id X cannot be transferred neither to my device permanently and be kept there (I would be just fine with that) or transferred to my apple id Y (I actually have no idea how to do this. So I kinda bet my money on the first option).
This is what I tried:
I logged into icloud using my X id and the devide started downloading my notes and pages etc. Then I chose to delete the icloud account (in order to log back in afterwards using my Y id). First it warned me that if I deleted the account I would lose all the data from my phone that had been stored in icloud. But the next message was asking me If I wanted to keep the data. A little paradox here. Anyway, of course I chose to keep the data on the phone. However it didn't work. Being at the stage with "no icloud", all I was left with, were the data I had created and stored on my new iphone. Nothing was kept from icloud X. The next step was to log back into icloud using the Y id and the data that were stored there appeared as one would expect. But of course no sign of the data from the "X account".
So, is it possible for me to somehow transfer or save or keep in my iphone, all the data that is stored in icloud under id X, and then start using my apple id Y for icloud without losing nothing at all???
Is icloud a bit of a one-way path or is it just me?
P.S. I often log into both icloud accounts from my pc to check them and everything is still there and is intact, so fortunately I haven't managed to mess up anything (yet).

Thanks for your reply but maybe it would be helpful if you could elaborate a bit on that or maybe I was not clear enough in my question. What I need to do is NOT stop using icloud. But gather everything that is already stored in my old icloud account (X) and save it in my device (iphone, ipad etc) and then continue using icloud but with my new account (Y).
In a scheme:
"->" = "becomes"
Step 1) data from X -> independent device data, and then the X account is removed from the device while the data stays.
Step 2) account Y is added to the device.
Step 2 continued) now the device has a. "the independent device data" that was drawn from the account X and b. the litte piece of data from Y that I have already created.
Step 3) independent device data -> data in account Y (along with everything that is created from now on, and everything that has been stored there. The little piece mentioned above.) Everything should now be merged in Y. Merged in a "good" way. Not overwritten, not deleted etc. Nothing should be lost (old or new, from the device or from X or from Y).
The last step is kind of optional. If the best I can get is having data associated to Y (future and past) AND "independent device data" that is so independent to the point that it cannot be added to my Y account since icloud recognizes and stores only data that is created after the account's addition to the device, then I can deal with that.
I hope I cleared everything out.
I need my notes and pages documents from my old icloud account to become independent device data and just stick to the device. And then, if possible, be uploaded to my new icloud account.

In Pages how do you automatically update a date in a document each time you open the document?

That's all I need to know, and also if it isn't possible, I'd like to know that.
Thanks,

After one enters the Date/Time in Pages '09, the Edit Date & Time item on the contextual menu provides a checkable Automatically update on open. Every version of Pages v5 lacks this capability, and the auto-update setting will be ignored in a Pages '09 document opened in Pages v5.

How do I automatically save array data to a spreadsheet?

Similar Messages

Maybe you are looking for