How do i clear my database

I don't care about tags or anything i just want to start over as a new setup. I saw the other tread and it not all that clear
I just want simple steps anyone please.. Im new to this software and its anything but easy..I took for granted what ever i did in windows would take affect in photoshop(wrong) but im just starting so i hope someone could tell me how to start over..Thanks..

                             Thanks for your reply and i guess you mis understood me as my catalog was all messed up.I want tags and all the goodies
         but just wanted to start with a fresh catalog. One question though does that delete the other catalog ? Thats was what i was wanting, Thanks
        I whish the catalog would mirror the pc thats what got my catalog all #%*# up... I'm Learning

Similar Messages

How do I run a database procedure that inserts data into a table from withi

How do I run a database procedure that inserts data into a table from within a Crystal report?
I'm using CR 2008 with an Oracle 10i database containing a number of database tables, procedures and packages that provide the data for the reports I'm developing for my department. However, I'd like to know when a particular report is run and by whom. To do this I have created a database table called Report_Log and an associated procedure called prc_Insert_Entry that inserts a new line in the table each time it's called. The procedure has 2 imput parameters (Report_Name & Username), the report name is just text and I'd like the username to be the account name of the person logged onto the PC. How can I call this procedure from within a report when it's run and provide it with the 2 parameters? I know the procedure works, I just can't figure out how to call it from with a report.
I'd be grateful for any help.
Colin

Hi Colin,
Just so I'm clear about what you want:
You have a Stored procedure in your report. When the report runs, you want that same procedure to write to a table called Report_Log.
If this is what you want the simple answer is cannot be done. Crystal's fundamental prupose is to read only, not write. That being said, there are ways around this.
One way is to have a trigger in your database that updates the Report_Log table when the Stored Procedure is executed. This would be the most efficient.
The other way would be to have an application run the report and manage the entry.
Good luck,
Brian

How to Create A new Database in the oracle 10g XE

i have oracle 10g XE i tried to create a new database but its giveing me error when i execute the sql command that is create database testDatabase how to create a new database in oracle 10g XE

Hi there 785434,
(This is a generic SQL question relating to Database Triggers, please post future questions of this type into the relevant forum area.)
Moderator, please move this if able
I use Before Update and Before Delete Triggers to record a 'snapshot' of the row being changed in my applications.
Example:
CREATE TABLE TEST
DATA VARCHAR2(64 CHAR),
CREATING_USERID VARCHAR2(20 CHAR) DEFAULT user NOT NULL,
CREATED_DATE DATE NOT NULL,
CHANGED_BY_USERID VARCHAR2(20 CHAR),
CHANGED_DATE DATE
LOGGING
STORAGE
(MAXEXTENTS UNLIMITED);
CREATE TABLE TEST_HISTORY
DATA VARCHAR2(64 CHAR),
CREATING_USERID VARCHAR2(20 CHAR) DEFAULT user NOT NULL,
CREATED_DATE DATE NOT NULL,
CHANGED_BY_USERID VARCHAR2(20 CHAR),
CHANGED_DATE DATE,
CHANGE_DESCRIPTION
NOLOGGING
STORAGE
(MAXEXTENTS UNLIMITED);
CREATE OR REPLACE TRIGGER TRG_BU_TEST
BEFORE UPDATE ON TEST FOR EACH ROW
BEGIN
INSERT /*+ append */ INTO TEST_HISTORY
(DATA, CREATING_USERID, CREATED_DATE, CHANGED_BY_USERID, CHANGED_DATE, CHANGE_DESCRIPTION)
VALUES
(:old.DATA, :old.CREATING_USERID, :old.CREATED_DATE, USER, SYSDATE, 'UPDATE');
END;
CREATE OR REPLACE TRIGGER TRG_BD_TEST
BEFORE DELETE ON TEST FOR EACH ROW
BEGIN
INSERT /*+ append */ INTO TEST_HISTORY
(DATA, CREATING_USERID, CREATED_DATE, CHANGED_BY_USERID, CHANGED_DATE, CHANGE_DESCRIPTION)
VALUES
(:old.DATA, :old.CREATING_USERID, :old.CREATED_DATE, USER, SYSDATE, 'DELETE');
END;
Using triggers like this will record who made an update or delete to the database and record the row before it was changed.
Note that this method might not be suitable for very high transaction rates.
You will need to 'clear' these history tables as part of routine maintenance.
Hope that this Helps.
Ronald.

How to create a logical database?

Hi,
Can anyone tell me how to create a logical database? I am curious about it.
Thanks.
Awards will be provided.
Best regards,
Chris Gu

Transaction code for creating Logical db is se36.
Give the name as <ldbname>..
Specify the table names and the sub nodes according to your heirarchy.The root node used is zxxx_product and child node is zxxx_orders
The heirarchy used is ZXXX_PRODUCT---->ZXXX_ORDERS
write the below code under selections ...
Enable DYNAMIC SELECTIONS for selected nodes :
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE zxxx_product.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE zxxx_orders.
Enable FIELD SELECTION for selected nodes :
SELECTION-SCREEN FIELD SELECTION FOR TABLE zxxx_product.
SELECTION-SCREEN FIELD SELECTION FOR TABLE zxxx_orders.
***User defined blocks :
****Root node
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001 .
SELECT-OPTIONS :
so_pname FOR zxxx_product-prname ,
so_pdelv FOR zxxx_product-prdeldate .
SELECTION-SCREEN END OF BLOCK b1 .
****Child node
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002 .
SELECT-OPTIONS :
so_odate FOR zxxx_orders-orddate ,
so_oqty FOR zxxx_orders-ordqty .
SELECTION-SCREEN END OF BLOCK b2 .
write the below code under include include DBZXX_PRODUCTTOP
TABLES : ZXXX_product, ZXXX_orders.
DATA : gt_root TYPE table of ZXXX_product ,
gt_chld TYPE table of ZXXX_orders .
write the below code under source code...
Call event GET Zxxx_PRODUCT
FORM put_zxxx_product.
TYPES : BEGIN OF ls_pid ,
prodid TYPE zxxx_product-prodid,
END OF ls_pid .
DATA : lt_pid TYPE ls_pid OCCURS 0 ,
lt_pid_tmp TYPE ls_pid OCCURS 0 .
STATICS lv_first_time VALUE 'X'.
STATICS ls_isroot_fields TYPE rsfs_tab_fields.
STATICS ls_isroot_where TYPE rsds_where.
STATICS ls_ischld_fields TYPE rsfs_tab_fields.
STATICS ls_ischld_where TYPE rsds_where.
IF lv_first_time EQ 'X'.
CLEAR lv_first_time.
          o
                + Declarations for field selection for node Zxxx_PRODUCT ***
" move table name to the corresponding field
MOVE 'Zxxx_PRODUCT' TO ls_isroot_fields-tablename.
" Read values from selection screen
READ TABLE select_fields WITH KEY ls_isroot_fields-tablename
INTO ls_isroot_fields.
" move table name to the corresponding field
MOVE 'Zxxx_PRODUCT' TO ls_isroot_where-tablename.
" Read values from dynamic selection screen
READ TABLE dyn_sel-clauses WITH KEY ls_isroot_where-tablename
INTO ls_isroot_where.
          o
                + Declarations for field selection for child node Zxxx_ORDERS ***
MOVE 'Zxxx_ORDERS' TO ls_ischld_fields-tablename.
READ TABLE select_fields WITH KEY ls_ischld_fields-tablename
INTO ls_ischld_fields.
MOVE 'Zxxx_ORDERS' TO ls_ischld_where-tablename.
READ TABLE dyn_sel-clauses WITH KEY ls_ischld_where-tablename
INTO ls_ischld_where.
"...Check whether entry is made in atleast one selection field:
IF NOT so_pname IS INITIAL OR
NOT so_pdelv IS INITIAL OR
NOT so_odate IS INITIAL OR
NOT so_oqty IS INITIAL OR
NOT ls_isroot_where-where_tab IS INITIAL OR
NOT ls_ischld_where-where_tab IS INITIAL .
"...Check whether entry is made in atleast one field in root node :
IF NOT so_pname IS INITIAL OR
NOT so_pdelv IS INITIAL OR
NOT ls_isroot_where-where_tab IS INITIAL .
SELECT prodid FROM Zxxx__product
INTO CORRESPONDING FIELDS OF TABLE lt_pid
WHERE prname IN so_pname AND
prdeldate IN so_pdelv AND
(ls_isroot_where-where_tab).
"...Check whether entry is made in atleast one field in child node:
IF NOT so_odate IS INITIAL OR
NOT so_oqty IS INITIAL OR
NOT ls_ischld_where-where_tab IS INITIAL AND
NOT lt_pid IS INITIAL.
SELECT prodid FROM Zxxx_orders
INTO CORRESPONDING FIELDS OF TABLE lt_pid_tmp
FOR ALL ENTRIES IN lt_pid
WHERE prodid = lt_pid-prodid AND
orddate IN so_odate AND
ordqty IN so_oqty AND
(ls_ischld_where-where_tab).
lt_pid = lt_pid_tmp.
ENDIF.
ELSEIF NOT so_odate IS INITIAL OR
NOT so_oqty IS INITIAL OR
NOT ls_ischld_where-where_tab IS INITIAL.
SELECT prodid FROM Zxxx_orders
INTO CORRESPONDING FIELDS OF TABLE lt_pid
WHERE orddate IN so_odate AND
ordqty IN so_oqty AND
(ls_ischld_where-where_tab).
ENDIF.
******lt_pid contains all the selections based product ids
******Now retrieve all the records with the corresponding product ids
CHECK NOT lt_pid IS INITIAL.
IF NOT ls_isroot_fields IS INITIAL.
SELECT (ls_isroot_fields-fields) FROM Zxxx_product
INTO CORRESPONDING FIELDS OF TABLE gt_root
FOR ALL ENTRIES IN lt_pid WHERE prodid = lt_pid-prodid.
ENDIF.
IF NOT ls_ischld_fields IS INITIAL AND
NOT gt_root IS INITIAL.
SELECT (ls_ischld_fields-fields) FROM Zxxx_orders
INTO CORRESPONDING FIELDS OF TABLE gt_chld
FOR ALL ENTRIES IN gt_root WHERE prodid = gt_root-prodid.
ENDIF.
LOOP AT gt_root INTO Zxxx_product.
PUT Zxxx_product.
ENDLOOP.
ENDIF.
ENDIF.
ENDFORM.
write the below code under
include DBZXXX_PRODUCTNXXX -->
include DBZXXX_PRODUCTN002 .
form put_zxxx_orders
LOOP AT gt_chld INTO zxxx_orders WHERE prodid = zxxx_product-prodid.
PUT ZXXX_ORDERS.
ENDLOOP.
endform.
now write a report program and call the ldb by its name using get
get <ldbname>.
Reward if this is useful.
Regards,
devi.
Edited by: Devi Raju on Jul 15, 2008 9:13 AM

How To Reset/Clear Open With Contextual Meni

I right click on a jpeg, and it shows three PS CS3, Illustrator, Color Sync, Device Central, etc. choices.
I have only one of the apps installed.
How do I clear or reset the "open with" menu in the Finder?

Rebuild LaunchServices Database
For Tiger users
Open the Terminal application in your Utilities folder. At the prompt paste in the following command in its entirety:
/System/Library/Frameworks/ApplicationServices.framework/Frameworks/LaunchServic es.framework/Support/lsregister -kill -r -domain local -domain system -domain user
Press RETURN.
For Leopard and Snow Leopard users
Open the Terminal application in your Utilities folder. At the prompt paste in the following command in its entirety:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
Press RETURN.

How do I clear the parameter after form post?

Hi. I am learning my first JSP and was trying to do a form post. However, I found that after successfully submit to the database. If I press F5 (Refresh) from browser, the data will be re inserted into database. How could I clear the parameter (action) after data insert. My code structure is as follow.
Thank you.
<%@ page import="java.sql.*" %>
<%! Connection conn;
PreparedStatement stmtInsert;
public void jspInit() {
try{ ... }catch(SQLException e){}
catch(ClassNotFoundException e){}
public void jspDestroy() {...}
%>
<% if (request.getParameter("action") == null ) { %>
<H2>Data Entry:</H2>
<FORM METHOD="post" ACTION="<%= request.getRequestURI() %>">
<INPUT TYPE="submit" NAME="Submit" VALUE="Submit">
<INPUT TYPE="reset" NAME="Reset" VALUE="Reset">
<INPUT TYPE="hidden" NAME="action" VALUE="insert">
</FORM>
<% } else if (request.getParameter("action").equals("insert")) { %>
<%
try{
synchronized(stmtInsert){
stmtInsert.executeUpdate();
out.print("<br> Room has been inserted successfully");
// once successful...how could I change the action to null?
} catch (SQLException e){
%>

http://forum.java.sun.com/thread.jsp?forum=45&thread=78925

How do i clear email address memory

suggestions for email contact include contacts that are no longer in use. how do i clear those suggestions? thanks.

Only by restoring your phone as a new device in iTunes, or if you know how to edit SQLite databases, you could edit your iPhone backup & then restore your phone from that edited backup. Otherwise, you live with it. The data will be overwritten as you use your phone.
There is no way to edit this database directly on the phone itself.

How do I clear old alerts?

Hi,
On my Grid Control home page, I have 311 warnings. Some of these warnings are no longer applicable and some of them are on metrics that I am no longer monitoring on. For instance, I am not interested in whether somebody has logged in to a database as the SYS user, especially not when it occurred six weeks ago!
How can I clear these alerts? Some alerts have a check box beside them, so I can check the check box and click "Clear Alert". For most of the alerts, the check box is greyed out.
Thank you for any insight on this!
Maria

Thank you for your response! I had actually made a search and come across the thread that you are referencing, but I would really like to do this through the front-end at this point, and I am amazed that there doesn't seem to be a simple way to do it! What use is the home page summary if there is so much noise!
Anyhow, I figured out a way to clear these warnings through the front-end, although not by checking a simple check box and pressing a button, that I would have preferred. I set the threshold of warning and critical to way beyond what is ever likely to happen, and set the collection schedule to once per minute. The alerts cleared. Then, I disabled the collection altogether.
Regards,
Maria

How do I clear an old calls from middle of screen

how do i clear old call from middle of screen

Uninstalling iTunes just removes the program. It does not remove the database or media files which are what you see when the program opens.
Trash the iTunes folder. Not the program but the one at \Users\username\My Music\iTunes\ or whatever location is provided for the system version you are running in:
What are the iTunes library files? - http://support.apple.com/kb/HT1660

How can i clear all events in ical

how can i clear all events in ical

Try typing "." without the exclamation points in the iCal search window. Then simply highlight all the entries > Edit/Delete

How do I clear a list of usernames which is automatically offered when I login to a site.

For example, if I want to sign into gmail, it asks for the username. As soon as I type in the first letter, it gives me a selection which it stored. Once I made a mistake and typed my password in there which also begins with the same letter. How do I clear the list? Actually, how can I set Firefox so that it doesn't automatically store that information.

Password Manager deals only with passwords. The problem described above is about the User Name. I tried the Shift+Delete tactic, and it worked! Be sure to follow instructions in the link provided in the solution: http://kb.mozillazine.org/Deleting_autocomplete_entries

How to create tree by database table

hello sir ,
my table is as follows,
NAME LINK ID PID ROLLID
User mgt. f?p=131:1: 1 - 10 ////root node///
district 10 1 1 child
Roles 16 14 4 child
Users 11 10 1 child
ROLLID is given from another table whis is (ROLES). i making tree by the combinations of id , pid, & roll id. by the roll id i can manage the tree to do not display specific nodes to specific users.
ROLE table as :
ROLE_ID NAME DESCRIPTION
1 Administrator This is administrator
2 Assistant Director -
3 Assistant Statistical Officer -
4 Data Entry Operator -
but i think it is very complicated process . give me solution about it
also i have to give my images to each node. how can i do that?

You already have a thread going about this: Re: how to create tree by database table .
Scott

How do we clear the GR/IR Reconciliation Report on PO

Hi expets,
can you please help me to solve this issue
"How do we clear the GR/IR Reconciliation Report on PO"
thanks in advance,
mohammad

> "How do we clear the GR/IR Reconciliation Report on PO"
Use MR11 Trxn Code GR/IR Clearance

GR/IR Key manditory in PO...How can i clear customs duty befor GR

Hi All,
As per the business requirement, i made GR based IR manditory in PO. Now for Import Pos, how can i clear the customs duty before doing GR.]
Regards,
Naidu.

Hi
Custom duty is a delivery cost. You can process the delivery cost before GR even with activation of "GR Based IV".
Control due to "GR Based IV" is applicable for goods item invoice.
warm regards
sairam akundi

How do I clear cache and cookies on my ipad

How do I clear cache and cookies on my ipad? I was told to do this when I was trying to download ebooks to ibooks and kindle

Settings/safari/clear history;clear cookies and data

How do i clear my database

Similar Messages

Maybe you are looking for