How do I configure this? (ie. config doc says access denied?)
I'm trying to access the Mobile Access Install/Config guide (http://communities.vmware.com/docs/DOC-9741) but it says access denied.
I've managed to get the Mobiel Access beta installed, and I can access it via a web browser and I can even login but the Mobile Access website only has actions like restart and shutdown. I don't see my VMs or anything like that.
What else do I need to configure?
I'm having the same problem. I've downloaded the appliance, but I'm unable to download the documentation.
Similar Messages
-
How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?
If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC -
I like to use the new TC in my office as a time machine on a Windows Server. Is this possible, and how do i configure this?
In fact my plan is to make the first back up by connecting to the server via an ethernet cable, but thereafter i like to bring the TC to my home and perform the incremental backups over the internet. This is for safety reasons, in case for example the office is broken into, or flooded, or fire (god forbid).
I sincerely hope it is possible, and not complicated.
Alternatively i would not mind replacing our current Windows server 2003 with an Apple server, but all computers in the network (except mine) are Windows 7 or 8. Would it work?
Thanks in advance.
ParisI will consider the WD My Cloud device.
It is a NAS.. it is designed to provide a cheap centralised file storage.
What is NAS?? http://en.wikipedia.org/wiki/Network-attached_storage
A file server like windows uses heaps of power to do very little.. in your setup.. In most setups like SBS it will do exchange server and provide a heap of useful connectivity to your clients.
Since you are not using the windows server in anything but simple file serving you can replace with a NAS..
Problem with the TC is, it is a router with a hard disk inside.. designed specifically for Time Machine.. it fails to provide what a NAS does.. easy access to any clients, local or remote.. TC is designed by apple for apple and the rest of world is not really invited to the party.
It provides no backup.. no data protection.. and is so specifically apple orientated I do not think it works at all well with windows.
For a simple example.. windows will have file issues with large files.. because it is only NTserver FAT32 to windows.. bad luck if you have large files.. !!
Plainly if you use active directory in windows that facility is gone.
I just like Apple products, find them more stable than Windows and easier to use. Plus i can access the server from home if it is an Apple Server.
If you only need remote access for yourself that is fine.. too bad for the windows clients I guess.
Or you open it up to the world and bad luck for security.
Apple do not design for mixed environment.. in fact with the TC there is no provision for windows access officially at all.. so anything you do is a fudge.
You can use the TC for your Mac backups within the network.. that is fine. Apple provide no software at all to help with your windows clients. -
I just updated my iTunes and now I get a message that the application has failed to start because MSVCR80.dll was not found. What happened and how do I fix this? I can't access any of my music now.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99460) -
My photos shrink in size when emailed from IPHOTO or attached - How can I fix this. My friends say they can't see my pictures... thanks!!
When you email from iPhoto, you have a choice as to the size of the picture - choose medium and your friends will be able to see them. By the way, do your friends click on the photo attachment in the mail to open it?
-
How do you fix this error? Can't access photos----" Your photo library is either in use by another application or has become unreadable"
Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If you can create and use a new library then your current library is damaged.
If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint. -
I have just got a leapad for my daughter, trying to download software for macbook pro and it says access denied, so can't even install CD to get it started. Any ideas as to why this would be? Thanks
Try going to System Preferences>Security & Privacy and under the General tab...
...select "Anywhere". Note that you'll need to use an admin account to access these settings.
Merry Christmas,
Clinton -
How do I configure a deployed webapp (war) for access without port numbers
Using WLS 11g.
Have created a managed server called "DeplymentServer". This managed server is listening on port 9005.
I have deployed a war, webapp, and selected the DeploymentServer as its "target".
The war file was originally on our 10g OAS and deployed as OC4J and I made no changes to prior to deploying to our 11g Weblogic installation.
On 10g we used to be able to call the webapp directly from one of our webpage like this:
https://cxxxxx.nswc.navy.mil/wizardapp/wizard?REQUEST=Change_Request_Form
Now on 11g I have to remove the "s" from https and include the port. So now my url looks like this
http://cxxxxx.nswc.navy.mil:9005/wizardapp/wizard?REQUEST=Change_Request_Form
I am currently testing this behind a firewall so http will work here as will the port, but when we go live these won't.
My questions are:
1) Is there a way to configure the webapp deployment or the managed server, so I don't have to include the port number to access my deployment?
2) How to I configure so I don't have to remove the s from https.
At the moment question 1 is more pressing.
I think If I can get question 1 squared away question 2 may get corrected as well.
Thanks in advance for any help.
Steve.Hi Steve,
Port 443 is the default HTTPS listen port for Servers...so to access an application using : https://cxxxxx.nswc.navy.mil/wizardapp/wizard?REQUEST=Change_Request_Form .... You were not needed to provide the 443 protocol in the URL because ur Server (Or the frontend proxy) was also listening on 443 SSL port.
Now as u want to use HTTP Protocol...(Port 80 is the default HTTP listen port so it will not be visible in the URL)... So you have 2 options now:
Option-1). Either u change the Server Port to 80 (Server in which ur Application is deployed) so that the Port will not be visible on the URL.
Option 2). Install a WebProxy (on Port 80 infront of the WebLogic Server)...and by pass the requests to the WLS through the Proxy. like: http://weblogic-wonders.com/weblogic/2010/05/13/apache-proxy-as-static-content-repository/
Thanks
Jay SenSharma -
My iPad says "Account Not Verified" when I try to go into iCloud. How do I fix this?
You only have the option if you are already running iOS 5. If you are trying to update the iOS, you have to use iTunes on a computer to update the iPad.
There are some important things that you should know before you update and you can read bout those here.
http://support.apple.com/kb/ht4972
More instructions here - for all iOS versions. Make sure you read the part about using iTunes.
http://support.apple.com/kb/HT4623 -
I currently have an Airport Extreme Base Station connected to my DSL router by Ethernet. Because I have a long, sprawling home, I have 3 Airport Expresses configured to "Extend the Wireless Network" I've established. Because of my home environment--thick walls encompassaing wire mesh, sprawling rooms, etc., it is hard to maintain a continuously-strong, stable WiFi signal. I've been told that I can create a much more stable network by connecting the Express units to the AEBS via Ethernet cable. Since my home is already wired for Ethernet, I'm considering making this change. If I proceed to establish the Ethernet connections, how do I then set up Airport Utility to accomodate this switch from a Wireless-based WiFi network to an Ethernet-based WiFi network?
Thanks in advance for any help.
PhyllisI don't see anyplace in the Utility to designate HOW the Express units are connected, only how they relate on the network to the Extreme,
As I mentioned in the previous post, when you click the Internet icon in AirPort Utility:
Connect Using = Ethernet (This tells each Express to connect to the Extreme using the ethernet connection)
Connection Sharing = Off (Bridge Mode) (This setting allows your AirPort Extreme to function as the "main" router on the network, as it must for the setup to work correctly.
You do not need to configure anything differently on the AirPort Extreme (as long as it is working correctly now) to connect the AirPort Express devices.
The only other question I have is the following: I'm currently already using one of the Ethernet ports on the back of the Extreme-- for my husband's iMac. I really don't think he gains much in performance over how the iMac would run through wifi, so I could disconnect the iMac. If you think the iMac would do better to stay on the Ethernet connection, should I use a switch/splitter to add an extra connection?
Since each AirPort Express must connect using ethernet, you will need to use the 3 LAN <-> ports on the AirPort Extreme for the AirPort Express devices.
I would suggest that you try connecting the iMac using wireless to see if that will work. If the wireless connection is not satisfactory, then you can add a 5 port ethernet switch to one of the LAN ports on the Extreme and then plug all the devices connecting using ethernet....the iMac and the 3 AirPort Express devices...into the remaining 4 ports on the switch. That will leave you with 2 open ports on the AirPort Extreme for any future devices that may need to connect.
When you test out the system, here is a trick to find out which device your computer is actually connecting to at any given time as it "roams" around the house.
When you have AirPort Utility open to configure each AirPort Express, jot down the AirPort ID for each Express. You can do the same for the AirPort Extreme.
As you move around with your laptop, hold down the option key on your Mac keyboard while you click on the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device that the laptop is connected to at that time. it should also be the ID of the closest AirPort Express (or AirPort Extreme if the laptop is close to the Extreme at the time).
Let us know how things are working when everything is up and running. -
How can I configure my IP Camera for remote access
Hi All,
I hope you can help.
I bought one of these http://www.wansview.com/Products/NCB-541W29654.html which seems to be a pretty common camera, made by I think Foscam (as the link on the site for setup links you to http://foscam.us/blog/foscamipcameras/guide-to-setting-up-your-foscam-fi8908w-wi relessly/
I got my camera set up all okay, and it is connected now wirelessly, however I'm having a huge problem getting it to connect so I can view it over the web ie access it from anotehr browser and see what is going on.
The remote instructions advise me to set up port forwarding, so I open my Airport Utility and log in to my Airport Extreme and I was following these instructions https://discussions.apple.com/docs/DOC-3415.
My airport extreme is version 7.6.1, and I'm using an iMac with Mountain Lion 10.8. And this is where I start having problems.
1: The apple support doc advises me to use 'manual mode' which I don't seem to have.
However I go to "Network" and from there I can see my router mode - set to 'Off (Bridge Mode)'. When I chnage this to DHCP only, it gives me an IP range 10.0.0.2 - 10.0.0.200 and as my camera is set to 10.0.0.58 this allows me to to reserve a "DHCP" for that camera.
2: When I then set update, I get a message saying "sahring a range of IP addresses using on DCHP requires manual config of my wan IP, get the static from the ISP and then manually configure through the range' - which doesn't seem right.
3: I change it to DCHP & NAT, but then the DCHP range has chnaged to 10.0.1.2 to 10.0.1.200 which is then out the range of my camera. It does though open the 'port settings' function, thus allowing me to enter my public and private ports, but it won't take the camera IP that is set at 10.0.0.58, andf I can't enter 10.0.0. as this locked to 10.0.1
4: If though I save it, when my Airport re-boots, I get a "double-nat' error, whihc I have no idea what that is.
Any ideas please? My Airport is connected to a Thomson modem router supplied by my ISP (Big Pond in Australia)
Really appreciate your help and support here, many thanks!By port forwarding.. called port mapping in airports.
AirPort - Port Mapping Basics using AirPort Utility v6.x -
I am currently in the midst of a divorce, which is typically nasty but even nastier when you've mistakenly married satan. My soon to be ex is very tech savy (he can write his own programs). I am not. I have noticed when the family computers are on in the office they are connecting to my Macbook pro. I can see this through the finder and the computers show up as shared. I recently bought my macbook pro (within the last two months, he filed for divorce last year).
How do I prevent him from linking up to my computer and how do I password protect my files? If he is accessing my computer than he can see everything I am sending to my lawyer. Which includes information that counters some of his claims.First of all you need to change your admin password and user name or create a new admin user, secondly you need to encryped any documents you are making by following the following guid...http://osxdaily.com/2012/01/11/password-protect-files-folders-in-mac-os-x/
This helped me close some files up, you need to make sure that you use a password he is not going to guess and that you don't store that password in the OS X keychain system.
This is what I would do if this where me though...
Buy and external HDD (all doucuments will be encrypted onto this drive, and the drive removed and taken away where ever I go.)
I would rebuild the Mac OS X to new like state, backing up only important items to the external HDD(wouldn't even bother with the software on it maybe only pages or Ms office)
Create a new user account and if you have an apple ID change the password of the ID again to somthing he is not going to guess.
Also make sure you are off the network he is on get your own broadband/network setup if you must.
Good luck with everything I hope it all turns out okay for you in the end. -
I cannot access the app store because the iPad is requesting a password to an Apple ID that does not exist. The app store seems to be using an @me iCloud address as the Apple ID. This is not my ID or email addresses. How can this be changed to my Apple ID?
Easy, just sign out then back in again.
iOS: Changing the signed-in iTunes Store account
http://support.apple.com/kb/HT1311 -
I am running the latest itunes software and dont know what else I can do
m12pru wrote:
for some reason that link is taking me to 4oD
How bizarre, try this again http://support.apple.com/kb/TS3694#error1015
Maybe you are looking for
-
Please help!! I have iPhone 4 so does my wife, we each have our own apple id's for these devices. We have just got an ipad to share for at home use. Is there a way to have both our id's on the ipad to share our music photos etc?
-
Error while executing tcode FSE2 "Internal error in program SAPLFIBS no 5"
I am getting below error which while trying to execute tcode FSE2 (Financial statement version). Can't able even go inside the tcode. Please tell how to solve this. "Internal error in program SAPLFIBS number 5"
-
My ipod has 2500 songs on it but when I plug into PC my itunes library only has 1600 - help ??
My ipod has 2500 songs on it but when I plug it into my PC - the itunes library only shows 1600 - HELP !!
-
NTEventLogger and SyslogEventLogger
Hi : Please somebody try to use this classes for logging ? NTEventLogger , works but allways send an information message (no error or warning). The SysEventLogger always fail under Solaris (log0 Unsastified Link Error). Please some experts there now
-
Div Layout positioning - borders?
Hello all, I've slowly been tinkering away at re-making our company's website in downtime between projects. I'm a graphic designer, still getting used to DW. I've had a lot of assistance from searching topics and asking questions on these forums alre