How do I create a multi-page doc / add blank pages in PSE 11?

I am creating printable PDF files and up to yesterday I was using a free trial of PSE 10. To create a multi page document I first saved it as a PSE project file, then added blank pages, then when I was done I saved it as a PDF and voila - done!
Now my trial has run out I have bought the paid version (which is now version 11) and I seem to have lost that option entirely. The product is useless to me without a way to create multi page PDFs - can anyone help?
Alternatively can I downgrade back to PSE10 which was fine for me!
Thanks

Thanks - I just spent an hour online to support, they won't refund me until they can work out why it won't allow it in the new version?!! So they have shared my screen and taken my files to be worked on "at the next level" - there didn't seem to be an option to accept that this feature just wasn't available in the version 11, they kept trying to make it do it. Especially as they could open my multi page projects created in version 10 and add pages to them!
Anyway, I would be open to using another free software MichelBParis, but I found it such a steep learning curve to figure out how to do it in PSE10, it would need to be simple. Do you have links to any you could recommend?

Similar Messages

How do I create a filter that bypasses the in page and goes directly to spam rather to delete?

How do I create a filter that bypasses the in page and goes directly to spam rather than to delete?

From your question I'm going to guess you are talking about Mac Mail.
If you are talking about a RULE then the "Perform the following actions:" would be to select "Move Message" to mailbox "Junk" instead of "Delete Message."
If you are talking about something else then please give more information.

I'm in a multi-page document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

I'm in a multi-page Pages document, how can i rearrange the pages or insert blank pages in front of pages? Also, is there a way to show the ruler both horizontally and vertically?

Not on my document. I have a 7 page document open. The "flashing vertical bar" is at the top of page 3. I have the thumbnail view showing. I click page break and two blank pages are added to the end of my document. I have to scrool thru the pages to see that the 2 pages were added as they do not appear in the layout view... I'm not sure if it is inserting a "section" as it adds two blank pages.. But I am clicking on "INSERT PAGE BREAK".. So guess there are still a lot of bugs to fix..
Thanks again

How do I create a duplicate image inside the same page? Then how do I change the color of that image

how do I create a duplicate image inside the same page? Then how do I change the color of that image from black to red?

Hello there!
Here is one way to create a duplicate image and colorize it. As you can see below, I have one image right now, that I want to duplicate.
My layers panel looks like below.
To duplicate your image, click the downward arrow on the right side of your Layer Panel.
Select Duplicate Layer. This will duplicate the layer that the image is on.
Select "OK" to approve the duplication.
As you can now see in the Layers panel, the image is duplicated. The new layer is now at the top of the Layer panel.
Now to colorize your image, go to Window > Adjustments.
The Adjustments panel will now be opened. Select the Hue and Saturation icon as seen circled in red.
The Hue and Saturation propertied panel will be opened. I selected "Colorize", and adjusted the hue and saturation bar to achieve the level red in my photo.
As you can see below, the image is now red.
Now i want to make sure only ONE of my image layers is red. I moved the Hue and Saturation layer to only be on top of the bottom layer. The image on the top layer now will not be affected by the red.
Select the move tool, so I can now move the image layers so we can see both of them.
With each image layer selected, you can take the move tool and move the images. I moved mine on top of eachother and you can see my red layer (bottom) and the non red layer (top).
I hope that helps. i have also included helpful links.
Please post back with any questions,
Janelle

How do I create columns in my text when using pages?

How do I create columns in my text when using pages?

Presuming you are using Pages 5.2.2:
select the text > choose the number of columns in the Format > Layout sidebar
Peter

When I open an old pages doc in new pages 5.0 objects in table cells are removed. how can I stop this?

When I open an old pages doc with new pages 5.0 - objects, specifically pictures, in table cells are removed. Is there a way I can stop this?

nigel32,
Gavin is right. You are bound to lose images in tables of docs made in previous versions. If you wish to continue using Pages 5.0 to edit docs from previous versions, you can try re-inserting your images using the following method:
1. Click on the cell you want to insert to.
2. Select CELL on the right contextual menu.
4. Click on FILL and select IMAGE FILL.
5. Click CHOOSE then select the image you need from Finder.
6. Tweak the appearance using the SCALE slider or drop down menu.

How to add blank page to existing Document In Adobe Dc

how to add blank page to existing Document In Adobe Dc Pro

Hi thashrifs16749461,
You can add a blank page using Adobe Acrobat DC by following the below instructions :-
1) Open your existing pdf document in Acrobat DC.
2) Choose the 'Organize Page' option form the Tools pane on the right as shown below in the screen shoot.
3) Now at the top you will see all the tools to Organize the page, Click on 'Insert' & select 'Blank Page' from the drop-down to insert blank pages.
*Shortcut : If you are using windows computer you can use ' Shift+Ctrl+T ' key to insert blank pages.
In case if you experience any issue or have any query please let us know. We will be happy to help you.
Regards,
Aadesh

How do I set the blank tab (+) to go to my home page instead of blank page when opend?

How do I set the blank tab (+) to go to my home page instead of blank page when opened?

You can do that by using an add-on such as [https://addons.mozilla.org/firefox/addon/2221/ NewTabURL] or [https://addons.mozilla.org/firefox/addon/777/ New Tab Homepage].

How do I make new tabs open to my specified home page instead of blank page?

How do I make new tabs open to my specified home page instead of blank page?

I generally like to avoid add-ons, and the second option is still an extra step - not opening tabs to the homepage, as requested (rather how to switch to your Home page after a tab opens to the blank page).
Here's a wild idea: How 'bout a setting option in Tools > Options > Tabs for "Always open new tabs to my Home page" ?

I just downloaded Lion. Now when I open Safari, it automatically opens to the last page visited. How do I reset it to open to a blank page as it did previously?

I just downloaded Lion. Now when I open Safari, it automatically opens to the last page visited. How do I reset it to open to a blank page as it did previously?

Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.

Print scaleType:showAll, generates 2 pages, the correct page and one blank page

Hello,
So I have a the following function:
private function printJobCreator():void{
var printJob:FlexPrintJob=new FlexPrintJob();
printJob.start();
printJob.addObject(printableInvoice, "showAll");
printJob.send();
invoiceIndex++;
printAll();
It seems to kind of work. However when it prints, it creates one page that is the right page, and one page that is blank. This isn't going to work for me because I have to run batches of many pages, so having every other page as a blank page isn't an option.
Additionally, my goal was to print multiple pages in one printJob for batch reports. This unfortunately doesn't seem like it is going to work. I was able to make a component that essentially would repeat container.addChild(printableInvoice) for each index in an object, each printableInvoice containing some dynamic concept, however I can't for the life of me get it to print like this.
So the current solution is annoying because for each invoice you have to go through the print dialogue again. Any Ideas? I realized I could do multiple printJob.addObject() calls, but this doesn't work for me because of the blank page issue.... So I either need to solve the blank page issue or generate a UI object that has multiple printableInvoices in it and print that UI object.
Any help?
Joel

This is the flow, I don't see how it could be adding twice. The important stuff happens when the printAll(); function is run.
<fx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.events.FlexEvent;
import mx.printing.FlexPrintJob;
import mx.rpc.events.ResultEvent;
public var Orders:Object = new Object();
public var printOrders:Array = new Array();
public var postOrder:String="";
public var invoiceIndex:int=0;
private function init():void{
getDataResult.token = orders.getData();
getDataResult.addEventListener(ResultEvent.RESULT, Orders_resultHandler);
private function Orders_resultHandler(event:ResultEvent):void{
Orders = getDataResult.lastResult;
for(var i:int=0; i <= Orders.length-1; i++){
if(Orders[i].print == 0){
printOrders.push(Orders[i]);
postOrder=printOrders[0].orderid;
for(var t:int=1; t <= printOrders.length-1; t++){
postOrder = postOrder + ","+printOrders[t].orderid;
private function orderToShipSorter():void{
private function printAll():void{
if(invoiceIndex <= printOrders.length-1){
printableInvoice.generateInvoice(printOrders[invoiceIndex]);
private function printOrderResult(event:ResultEvent):void{
private function checkLogin(event:ResultEvent):void{
private function printJobCreator():void{
var printJob:FlexPrintJob=new FlexPrintJob();
printJob.start();
printJob.addObject(printableInvoice, "showAll");
printJob.send();
invoiceIndex++;
printAll();
protected function printableInvoice_batchGeneratedHandler(event:Event):void
printJobCreator();
]]>
</fx:Script>

The App Store indicates that 5 items need to be updated. When I go to the Update page, only a blank page appears and no application logo appears for updating. Would appreciate receiving a solution for this.

The App Store indicates that 5 items need to be updated. When I go to the Update page, only a blank page appears and no application logo appears for updating. Would appreciate receiving a solution for this.
Sridhar

Okay - let's cut to the chase...
If the Menu Bar (File, Edit... Help) shown in my screenshot below is not visible, use CTRL+B to display it. Then click on Help/Check for Updates. If one is available, you will be able to select it at this time.
Note the item at the bottom of the list; About iTunes. Selecting that will show you which version of iTunes you are using.
An alternative method to display the Menu Bar is click on the box in the top left of your iTunes window...

Feature request / Add blank pages

Hey!
I'm using the Adobe Reader for Android on my Samsung Galaxy Note 10.1 2014 Edition since about one year and i'm very satisfied with it!
But there is thing i'm missing meantime!
I would like to add blank pages to a pdf document!
Is there a way to add a feature like this in one of the next versions?
Thanks for answer!

We have noted down your request and would forward the same to the Product Management. However, we cannot commit if this would be available in the immediate future.
Thanks,
Adobe Reader Team

How can you create a multi-page pdf document in photoshop elements 13?

I previously had pse 11 and was able to create multi-page documents as pse files. However, pse 13 does not allow. How can I create multi-page pdf files from pse 13?

Alas, for one of those mysterious adobe reasons, it's gone in recent versions. Only multipage file you can make is a photobook.

How can I get back my Word docs now that Pages will not open them?

How can I retrieve my Word docs now that Pages will not open them in Mavericks. I have a brand new iMac with my evolving manuscript for a book transsferred from my now defunct MacBook Pro by external drive. Pages tells me that "PowerPC apps are "no longer supported" and Mavericks will not open Microsoft Office, though it is still in Applications. Would really appreciate ANY help!

You will have to have an app that will open them first, you can upgrade to Office for Mac 2011 which is an Intel based app then open the docs and retry. Your docs were created with extremely old version of Office for Mac, version 2004!
Another possiblity is using a web based compatible MS Office for Mac app and see if it will open your doc and then save it, then attempt to re-open in Pages.

How do I create a multi-page doc / add blank pages in PSE 11?

Similar Messages

Maybe you are looking for