How do I create a simple search program to search java console log

I wanted to know how can I write a simple program to return a particular value from the java console.
Let me give u a brief.
There is an application that I use, say "XYZ".Every time I perform an action on "XYZ" a log gets created in the java console. One such thing in the log I want to search is "ANI" and the program/script shud return the value adjacent to it.
Log Example:
NumCTIClients:0 CallType:CALLTYPE_PREROUTE_ACD_IN
ConnectionDeviceIDType:CONNECTION_ID_DYNAMIC
ConnectionCallID:4 ConnectionDeviceID:"0"
ANI:"9782755100" DNIS:"0006"
DialedNumber:"8002755010" CED:"1"
RouterCallKeyDay:145000 RouterCallKeyCallID:34320231
CallVariable1:"1234567" CallVariable2:"0"
CallVariable3:"0006" CallVariable5:"26000 123-45-6789
Not Valid " CallVariable6:"1001123-45-6789
26000000000038404LPCFAA" CallVariable7:"THIBAULT,
JOHN C. " CallVariable8:"CISCO
TESPHE " )
Now my understanding is that whenever java logs in the console it appends at the top, i.e, first record stays on top of the log sheet.
Now this script/program shud look up the top-most line which reads ANI and return the corresponding value which in the abv ex. was "9782755100"
I wud also want a small button when clicked wud copy the "9782755100" to the clip board
Edited by: SasK on Feb 9, 2008 6:09 PM

dillmann74 wrote:
Hello all,
I am looking for a way to terminate a program when the user enters stop. I am using textpad, and I am running windows xp home. Here is where I need it....
System.out.print( "Enter employee name:" );
String nameOfEmployee = input.next();
System.out.println();
I need to be able to enter stop in the enter employee name area to terminate the program.
Thank you all for your advice.Do you know about if statements?
If not check out the java tutorials here
if you do then I don't understand your question.

Similar Messages

How do I create a simple gallery in iweb? I don't know much coding though!

how do I create a simple gallery in iweb?
I don't know much coding though so I struggle
with some tips given on-line. I've spent many
hours on it with no success. Helpful advice will be greatly appreciated.

Instructions :
http://www.wyodor.net/blog/archives/2010/03/entry_308.html
Result :
http://www.wyodor.net/_Demo/Fancy/Fancy2.html
http://www.wyodor.net/mfi/Dide/Photos.html

How do I create a simple message board (forum)

I am a BC new-bee. How do I create a simple message board (forum) in BC to use on a Muse site since no widget is available there.

No worries,
The simple way should be that:
open your forum page in Muse
under "object" > "insert HTML" > paste "{module_forum,a,}"
click ok
move the textbox to the right position
now publish this page to your bc site
if you have any forums set up in the admin of your site (http://yourdomain.com/admin) it should show you the title of the forum.
if there are no forums set up, you will need to create a forum in bc (Modules > Forums)
Try this and let me know how it turned out.
[ advertising removed by admin ]

How do I create a simple "prize draw" program?

Hey, I'd like to create a simple "prize draw" program
that randomly selects a name (or number) from a list of names, I'd like it to be my own custom version. For a programmer this is probably the easiest thing but I'm new to programming (beginner), don't eve know if I'm in the right subcategory (flash). Is there a tutorial or something somewhere that you guys think could help me out, please?

Create the list as an array and use the Math methods to randomly pick one of the values from the array.
var prizeArray = new Array("name1","name2");
var drawnPrize = prizeArray[Math.floor(Math.random()*prizeArray.length)];
trace(drawnPrize);
If you don't know if you should be using Flash, then you probably don't want to be looking for help until you figure out what you intend to do for your custom design.

How do I create a simple flare?

Hello,
I am a total newbie to AI, so any help/advice would be greatly appreciated.
I am trying to create a simple flare that will make my light bulb look like it is glowing really bright. I have been fooling around with the flare tool, but I can not figure out how to change the colors of the flare, etc.
I want the background of the flare to be transparent so that I can use it on any of my images and the image will show through. There are 5 different color flares that I need since I have 5 different bulb colors...1 yellow, 1 blue, 1 green, 1 amber, 1 red. I think that the scale should be about 25% height to 100% width...
Also, I want the same affect for a lighthouse image that I would like to put together...Like the light from the lighhouse is really bright and a focal
point.
Any help?
thx
Mike

There's a multitude of ways to draw flares. But let's explore the Flare Tool a bit more. After all, it's been sitting there occupying primary tool space in the Toolbox for years; might as well use it in the rare times you have occasion for it. To get a sense of the behavior, try the following exercise.
(The following assumes a CMYK document.):
Additional tips:
Like so many Illustrator features, tweaking the settings in the Flare Tool's stupid modal dialog is excruciatingly tedious. Before clicking to create the Flare you are going to adjust, go to the View menu and Hide Edges. Turn on the Preview checkbox in the dialog. Now you'll be able to tell what your adjustments are making are doing, without Illustrator's annoying highlighting of every path in a selected Group. (Absolutely hideous interface. I despise this program!)
Once you finallyget a Flare that you find useful, drag it and drop it into the Symbols Palette. Then save the Symbol Library somewhere for safe keeping, naming it UsefulFlares. Next time you work with Flares, load the library, even if you need a different Flare. When you manage to create another Flare you find useful, make it a Symbol, and export the Symbol Library again. (Do the same kind of thing with Brushes.)
Flares stored as Symbols, of course, can also be colorized somewhat by using the Symbol Stainer. That's a quick way to add a little color variance to tiny flares used as stars. But it's rather unpredictable due to the Screen Opacity Mode.
Don't be afraid to use two different Flares together. Store them together in the same Symbol.
The highlights of the screw threads on the bulbs are just an ArtBrush made from an expanded radial black-to-white grad, applied off-center to a circle. The ArtBrush is frequently useful for specular lights on cylindrical surfaces. The Brush's colorization mode is set to Hue Shift. (When expanding the grad, remember: There's no need to go nuts with the number of steps. 10 is usually a gracious plenty.) Each screw thread is just a single curved path with two Strokes: A thick black stroke with rounded end caps and an added stroke for the highlight brush.
JET

How can i create a simple netweaver portal page that shows text and images?

Hi,
i have a simple question or maybe it's not so simple.
I am completly new to SAP Netweaver 2004s Portal. At the moment i'm trying to understand the struture of the whole thing. I already know how to create roles, worksets and pages and i know how to combine the different elements so a user can acces them.
And now i want to create a simple portal page that shows text and images. Is it possible to create such a simple page with the portal content studio? What iView do i have to use?
(I just want to create a start page with a welcome text on it.)

Marc
Considering that you would any ways go ahead with complex development from this simple start page I recommend create a Web dynpro Iview for your start page (include the Iview in your page).
For putting the contents use Netweaver Developer studio to build a simple start page application and put your static text on that Iview.
Please go through the following log after your NWDS development is over - This will make you comfortable for further challenging work.
http://help.sap.com/saphelp_erp2005/helpdata/en/b7/ca934257a5c96ae10000000a155106/frameset.htm
Do reward points if this helps and let me know of you want anything more.

How do I create an update form, in a search.asp page.

I have a search.asp page which when submitted transfers to
the results.asp page. In the search I would like to also create an
insert statement. The search.asp page has the following.
Form: searchForm (Post)
Text Field: KeywordSearch
List Menu: CategoryTable
List Menu: Location
Button: Search
When a client enters data in the search.asp page, I would
like for the data, to be submitted to a database at the same time
it searches the database. This using an insert statement. The
reason for this is so that we can see what everyone is searching
for.
The database/table we created has the following.
Table: tblSearches
Field: idSearch (Auto Number)
Field: location (Text)
Field: category (Text)
Field: user (Text)
Field: keyWord (Text)
At the moment I cant create an insert form because of the
form that already exists in the search.asp page.
Can anyone suggest how to do this.
Ideally it would be good to be able to combine two forms into
one, but I am told that this is not possible.
TA
Mally.

Oh, I see. So is it Dreamweaver that wont let you create the
insert statement using a form that is already submitting to a
results.asp page? So if I create the insert statement by had it
should work?

How do I create a simple launcher VI that will end when the new VI is started?

I've just recently upgraded to Labview 7 and I'm writing a complex set of programs that are related, but do not need to be running simultaneously. I would like to write a simple launcher program that will load the appropriate VI and close itself after doing so. I understand how to call a subVI and have its front panel open upon execution, but I'd rather keep the VI's seperate.
Thanks for any help in advance.
-Warren

Try the attached example. Be careful though - if you make changes to this VI, make sure you save it before you run it, as it closes itself, and you will loose any unsaved changes...
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.
Attachments:
Splash_Screen_and_Launcher.vi ‏54 KB

How can I create more than one program shortcuts in LabView Installer?

I have builded 3 executable files in LabView Application Builder. I want to create an installer (using the same application builder) that can copy the 3 files to the same destiny directory, install the Runtime Engine and create (in the same program group) 3 shortcuts for the executables. Is it possible with LabView Installer?

The Application Builder does not offer this option. It is really intended as a basic installer builder. However, you can use other software packages to enhance your isntaller. There are many third party installer builders that you can use to modify the msi file which the application builder create for you. You might want to check one of those out and use it for your application.
J.R. Allen

How can I create a simple chat function in a mobile app for iOS and Android

I am wondering how can I create a chat function in my mobile app creating in AIR and Flex. The chat should be similar to the one in WhatsApp.
Do you know some possible solutions?
Thank you in advance!

To enable chat messages, you need a server. The kind of server depends on the application. Do you want to create a chat like application like WhatsApp, where the server pushes messages without an active connection? Or do you have some sort of online game, where chat messages can only be transferred when the client is connected already?
I have an online game where clients are connected to a Java server at all time. From there it is pretty straight forward:
2 textfields:
- 1 line textfield for input messages
- multi-line textfield for chat history. Make sure the textfields autoscrolls to the bottom when the content changes
on enter or button push, send a socket message to the server.
the server broadcasts all messages to all clients that are subscribers of the chat group.

How do I create a complete video program for 6 hours of event video?

I have used Premiere Elements 13 to create 10 Projects of individual presentations recorded in HD during a 6 hour conference. The chair of the conference wants a complete video record that could be given to participants. The totality is too large for a DVD but might fit on a large flash drive to be given to the participants. Each Project is a record of an individual presentation. I know how to create the individual videos of each presentation with Premiere Elements 13 and I can create DVDs. Multiple DVDs seem like a logistical problem and not everyone has Blu-Ray. I would like to have a menu like a DVD to take the viewer to any one presentation or to start at the beginning. The final product does not need to be HD but should be as good as possible.
This seems beyond what Photoshop Elements can do. Is it? How do I create the finished product?
Steve

Steve
Please clarify. You talk about Premiere Elements 13 and then you ask at the end
This seems beyond what Photoshop Elements can do. Is it? How do I create the finished product?
In Premiere Elements 13, the burn to products are the only end products with menus. The webDVD (flash file with menus)
has been discontinued in Premiere Elements 13.
How much of your HD source Timeline content can you fit on a DVD double layer single sided disc destined for DVD-VIDEO Widescreen on that DVD disc?
As a rough guess-estimate, when you have the disc in the burner tray, look at the burn dialog Quality area's Space Required and Bitrate just before you would hit Burn button in the burn dialog ("Fit Content to Available Space" with check mark next to it.)
The DVD double layer single sided disc is labelled 8.5 GB/240 minutes. In reality that 8.5 GB is 7.95 GB.
More later.
ATR

How can you create a simple insert or update trigger

I am trying to create a simple insert or update trigger to timestamp an xml document when I load it into my XML DB repository but I always get an error trying to compile the trigger.
"ORA-25003: cannot change NEW values for this column type in trigger"
Here is my PL/SQL:
CREATE OR REPLACE TRIGGER "PLCSYSADM"."PLCSYSLOG_TIMESTAMP"
BEFORE
INSERT
OR UPDATE ON "PLCSYSADM"."PLCSYSLOG"
FOR EACH ROW BEGIN
:new.sys_nc_rowinfo$ := xmltype('<datestamp>' || SYSDATE || '</datestamp>');
END;
Does anyone have an example that works ?
Thanks in advance
Niels Montanana

http://developer.apple.com/referencelibrary/HardwareDrivers/idxUSB-date.html

How do I create a simple database search

Either I'm being very stupid or all the manuals and books I'm
reading really are skirting round the obvious question of how do I
build a search page (using Dreamweaver 8) that searches a database
using only valid values previously fetched from the database. Can
anyone advise?
Example:
Say I've got a table called members which holds a list of
members of a gym. Say I want to offer my users a way of filtering
down the list of members by (say) home town and hair colour.
What I want to do is offer my users two lists which are
generated using Datasets: One listing all the unique hometowns of
my members and one listing unique hair colours. I want my users to
enter search criteia but only valid ones - so they must select from
the list of valid values I provide them with. I'll then filter my
main resulkts based on what they select.
But how do I do this? Not using URL variables obviously. And
not using Form variables as you can't list database items in a form
variable (can you?). I've got "DW 8: The Missing Manual" which I
was hoping would give me the answers I'm looking for but instead
seems to get very excited about the power of Dreamweaver 8 then
skirts round the fact that you can't use current database values to
do a database search!!! (unless I'm missing something that is)
While I'm at it - I'd idealy want to achieve all this on a
single page but I'm willing to concede on that if technology
predicts otherwise.
ASP.NET (VB)
Dreamweaver 8.0.2
Any guidance would be very welcome. (I'm new to all this by
the way)

> But how do I do this? Not using URL variables obviously.
Querystrings could be used if you wanted to. That'd be nice
so people could
bookmark the page.
> ASP.NET (VB)
Might be time to consider NOT using DW, as it no longer
supports ASP.net
But, in pseudo code:
onPageLoad:
- get list of hometowns
- populate hometown dropdown
- get list of hair colors
- populate hair color dropdown
onPostBack:
- check to see if there is a hometown selected
- check to see if there is a hair color selected
- if either of the above, modify the WHERE clause in your
SQL query to
reflect those values.
If you wanted to add querystrings, modify the logic as such:
onPageLoad:
- get list of hometowns
- populate hometowndropdown
- get list of hair colors
- populate hair color dropdown
- check for querystrings
- if they exist, grab them, modify the WHERE clause in your
SQL query to
reflect those values and show the results.
onPostBack:
- check to see if there is a hometown selected
- check to see if there is a hair color selected
- do a response.redirect to this page adding the appropriate
querystrings
if either of the above had values.
-Darrel

How do I create a simple stop commmand in an elementary Java program?

Hello all,
I am looking for a way to terminate a program when the user enters stop. I am using textpad, and I am running windows xp home. Here is where I need it....
System.out.print( "Enter employee name:" );
String nameOfEmployee = input.next();
System.out.println();
I need to be able to enter stop in the enter employee name area to terminate the program.
Thank you all for your advice.

dillmann74 wrote:
Hello all,
I am looking for a way to terminate a program when the user enters stop. I am using textpad, and I am running windows xp home. Here is where I need it....
System.out.print( "Enter employee name:" );
String nameOfEmployee = input.next();
System.out.println();
I need to be able to enter stop in the enter employee name area to terminate the program.
Thank you all for your advice.Do you know about if statements?
If not check out the java tutorials here
if you do then I don't understand your question.

How can I create a simple app that will automatically add folder script

Hi! I hope I can get a little help on this. I tried searching online and haven't found anything.
Is there away I can make a simple "application" that will automatically add a folder script to a users folder?
Basically I need a folder script to run but I don't want to explaint o a user how they'd have to do it in automator.
I'd like to be able to create an application they double click. The app tells them to select a folder then automatically runs the script.
Does anyone have any ideas of how'd I'd do this?

Oh I get it. Yeah I read you post on one of the other pages and didn't quite understand, but not that you say that your're makeing this for another user, it makes sence.
So what you want to do is have the computer automatically install a script on a customer's computer, right?
(I'm using "custumer" loosly; i.e. just another user)
If that's what you'd like to do, then you'll probably have to write an actual program in Xcode, since I imagine automiticlly installing folder action scrips will be highly discuraged by Apple because it would cause a huge security hole in the OS. (You wouldn't want some random person sending you a folder action installer disgused as a regular app LOL.)
But I will actually suggest the following, which I think will work great for your users:
Make a regular Automator app, and drag it to your Dock. Now, have the user click and drag a bunch of photos to the application icon, and it will run the app automatically on those files.
You could try a work flow like this:
ask the user Are you sure?
convert pictures
save pictures to ConvertedPics folder
pop up a confirmation message saying that everything was resized
Hope this helps

How do I create a simple search program to search java console log

Similar Messages

Maybe you are looking for