How Do I Create a Unique Customer Number - eg: Member No

We are building a membership site in Business Catalyst, and we want to automatically allocate a unique membership no to each member. I undertand that BC automatically creates a CRM ID,but I don't think that will work in this case because it doesn't show up on the customer record as a field, therefore we can't send a confirmation email giving them their membership no, or export the list to give to a card printer to create membership cards for them which contain their member no.
Does anyone know if this is possible and how to do it?
Thanks
Annette

Some kind of a hashing scheme based on user details would be more unique (and less prone to collision) than would random numbers. It would also be easier to verify (and assuming you can hide the scheme and the data, somewhat tamperproof.)
I found this jquery md5 hasher http://www.richardpeacock.com/dev/files/jquery.md5.js.txt and aes; http://www.hanewin.net/encrypt/aes/aes.htm
and also a js version of php's uniqid (that I sometimes use for user hashes) http://phpjs.org/functions/uniqid:750

Similar Messages

How do I create an ACR custom lens profile if camera exposure can't be set to manual?

How do I create an ACR custom lens profile if camera exposure can't be set to manual?
I ask this question for the Nokia 808 PureView 41MP camera. It produces stunning image quality but exposure can only be controlled via EV +/- compensation. I need a lens profile to correct for vignetting to get even skies in panorama (which turn out stunningly otherwise). There is no profile for the Nokia 808 PureView I am aware of and I'd like to produce one.
Is the Adobe profile creator able to correct for varying exposure using EXIF or overlapping parts of the chart or background?
Or would the Adobe profile creator ignore EXIF if I use studio flash to enforce a constant lightning situation, even if shutter speed would vary (aperture is constant and ISO can be set constant, just not the shutter speed)?
Or did Adobe produce a profile internally they can share?
Thanks.

If you read the first post, this is the camera-app of a 41MP Nokia Pureview 808 camera-phone, so maybe someone could write a new camera app but the phone is Symbian OS which is dead, making that unlikely.
http://www.digitaltrends.com/mobile/the-skeptics-guide-to-nokias-808-pureview-five-reasons -41-megapixels-are-not-a-gimmick/
http://www.digitaltrends.com/mobile/the-nokia-lumia-820-and-lumia-920-too-little-too-late/
It would probably be easier for Adobe to rewrite the LPC to allow vignetting to be computed from a single shot of a blank wall without a target in the shot, than to have someone rewrite a camera app that allows manual exposure.
Another idea about how to get the phone to keep a constant exposure would be to experiment with putting darker and lighter objects in the field-of-view away from the target area to make the camera metering adjust things so it’s exposure is the same from one shot to the next. This would take some doing but should work, unless the LPC uses the part of the frame that doesn’t contain the checkboard target in its computations.
You’re basically varying the scene around the target so the camera takes the same exposure of the target each time.

How do you create a unique folder to save a document?

How do you create a unique folder to save a document?

In the Save dialogue navigate to where you want it and either click on the New Folder button bottom left, or go command shift n.
Peter

How can we create a work schedule number

Dear pp masters
i have one issue in our client side, we are in repetitive manufacturing(with mrp),how to create the work schedule number,,,, ,in that we have see only semifinished not finished,what is the t-code pls reply back
thanks in adavance
devendra

Hi,
Please check the below link ;
http://www.sap-img.com/production/commonly-used-tcodes-in-pp-module-part-1.htm
Regards
Sreedhar reddy

How can I create SC without material number only description?

hi,
I have a problem . I want to create SC without material number only description.
How can I create SC only use description.
Thanks for your help.

Hi
Use the 'Describe Requirement' option in the Shopping cart creation screen.
Regards
Reddy

How can i create the master customer data

Hi friends,
I have one requirement here, I have to create one master database(MDM) start from very scratch on wards.
My question was
1. How can I do start with this.
2. What are all the software requirement
3. Are there any examples (video's are there).
4. One customer can have multiple email addresses. One customer can have multiple company. How shall I start with building the Master Customer list in this case?
Please send u r valuable suggestions.

1.
I would recommend this book which have very comprehensive step by step example and covers all the features.
http://www.amazon.com/Microsoft-Server-2012-Master-Services/dp/0071797858/ref=sr_1_1?ie=UTF8&qid=1416363310&sr=8-1&keywords=master+data+services+2012&pebp=1416363331373
2.
SQL Server 2012/2014 Enterprise Edition.
3.
http://technet.microsoft.com/en-us/sqlserver/jj737651.aspx
4.
Currently MDS only support 1 to many relationship. Does not support many to many.
Assume one email only belongs to one customer, and One company only belongs to one customer.
You could have 3 entities. Email, Customer, Company
Customer has two domain based attribtues, Email and Company, which are referencing to Email and Company entity.

How do I create my own custom persona to use and share?

I would like to create my own persona and then be able to share with Firefox users. I am clueless as to how to get started. I am sure the information is somewhere in the Mozilla Help database, but have yet to locate it. I just want to create a simple persona with some photos and graphics I have on my computer. I don't really know anything about code. Thanks for your help!

Google Search: '''firefox create a persona'''
* '''Personas for Firefox''' | How to Create Personas https://www.getpersonas.com/en-US/demo_create
* '''Personas for Firefox''' | Frequent Questions http://www.getpersonas.com/en-US/faq
* '''Personas for Firefox''' | Getting Started http://www.getpersonas.com/en-US/getting_started
'''I think you'd have a lot more fun with Styles though''', personas tend to hide things on toolbars, styles can be more helpful (or just as bad)
* '''Stylish''' :: Add-ons for Firefox https://addons.mozilla.org/en-US/firefox/addon/stylish/
* '''Restyle the web with Stylish!''' - userstyles.org http://userstyles.org/
* '''Scrollbar Context Menu''' - Themes and Skins for Browser - userstyles.org http://userstyles.org/styles/54
* '''Scrollbar Menu''' - Themes and Skins for Browser - userstyles.org http://userstyles.org/styles/52
* '''Link Warning''' - Themes and Skins for Mozilla - userstyles.org http://userstyles.org/styles/1301
* '''Tabs, Enlarge list-all-tabs button''' - Themes and Skins for Browser - userstyles.org http://userstyles.org/styles/18553
* '''Tabs Bar Minimal Size''' - Themes and Skins for Browser - userstyles.org http://userstyles.org/styles/9043
* '''Tab Color Underscoring active/read/unread (Fx3.6)''' - Themes and Skins for Browser - userstyles.org http://userstyles.org/styles/24728

How do I create a Calendar custom repeat or custom alert other than the choices given?

I would like to create a custom repeat for my calendar such as every 6 weeks or, every other month or whatever choice - - the only choices are "Every Day, Every week, every 2 weeks, every month, every year"? I would also like to create a custom alert for 2 weeks before or 10 days, etc and there is no "custom" option???

Whenever you find out let me know. I wanted to assign a text tone to someone and now in iOS 7 i can't. Or I haven't figured this out yet.

Keynote creates separate audio and image file when exporting to quicktime, how can you create one unique file?

I have a Kenote 09 presentation with a presentation soundtrack, when I export it to Quicktime two files are created one with audio and one with video.
¿Is there a way to have this be just one file or to combine this files to have one video+audio file?
I was able to put them together with iMovie, but the image looses quality.
Thanks

Thanks Gary
I tried fixed timing but I needed different timing for each slide. But I did manage to resolve using the following.
Since the audio was just music I first set both Input and Output sound setting in preferences to use Soundflower instead of internal mic and speaker, then played the presentation while recording audio so that the music would be recorded. And finally exported using Recorded Timing. This way the output was one unique file!
Good day

How do I create a No GAP number range for Belgium Inv. and SO

I need to know how can I set up a NO GAP umber range for Belgium Accounting Documents. I have been told tht this can be achieved by setting up a document numbering by company code. What do I need to do (configure) in order to get the number range to work by Company code?
Thanks
Nelson Rodriguez

Aloha Guido
Thanks for the reply, it has provided a lot of very usefull information. I still need to know what are the steps to follow in order to setup document numbering by company code.
Thanks
Nelson

How can I create a template using number on ipad2?

I'm trying to create and save a new custom template using numbers on my ipad2. I haven't quite figure it out so any advise would be greatly appreciated.

In numbers, with anysheet open, touch the wrench icon to get the help screen. Search template, and look at the entry to add and organize sheets.. Thats about as far as they are going to help,you.
I think the point is, you create the sheet you want to use as a template, then give is annmae you will remember, and just start with that sheet each time you want to use your template.
This is different than the normal template creation process, but works ok, i guess.
Just based on the form factor, you might be better off doing the creation work on a computer and mouse, then export it tomthempad for future use. It is hard, for me, to do extensive manipulation work on the ipad touchscreen.

How to create Image as Custom Property Type used in Configurable Web Part?

I wanted to create custom configurable web part property for Image.
Example - the screenshot of Image property used in Image web part is shown below:
My goal is to create as many images as possible in custom configurable web part.
I tried to write the code:
[WebBrowsable(true),
WebDisplayName("Example Photo"),
WebDescription("Example Photo of the user"),
Category("Custom User Profile"),
Personalizable(PersonalizationScope.Shared)]
public Image ExampleUserPhoto { get; set; }
However, the result does not display Image configurable web part property.
I wonder why the data type Image does not cause the custom web part to have Image configurable web part property.
Other data types such as Boolean, Enum, Integer, String and DateTime can be used.
How can I create Image as Custom Property Type used in Configurable Web Part?

I have examined that context node __00 has been enhanced,and has a class name z___00. But when I created a new attirubute by right click " Attributes" with wizard under context node __00.There is still a error message "view is not enhaced or copied with wizard".
But when I created a method "getvaliation " in the class of context node zcl__00, the attribute 'valiation' automatically created(at the same time the method "getvaliation' automatically created for the attribute 'valiation') and I need not to create attibute 'validation' by wizard . It seemed as if the problem is resloved. But when I make test for it in web ui .There is a runtime erro message.
Do I need to make some configurations in the business object layer for the checkbox? but the checkbox is only used as a flag to decide whether a backgoud job is needed to be executed.
Edited by: samhuman on Jun 22, 2010 10:31 AM

How to load R/3 Plant, Customer, Vendor, all linked in T001W

Hi,
In R/3 we have a Plant PL01. In the initial load of object DNL_PLANT this creates CRM BP #101 with role BBP003.
In R/3 we have a Customer CPL01 (linked to Plant PL01 in R/3 customizing table T001W). In the initial load of object BUPA_MAIN this creates CRM BP #102 CRM000.
In R/3 we have a Vendor VPL01 (linked to Plant PL01 in R/3 customizing table T001W). In the initial load of object VENDOR_MAIN this creates CRM BP #103 with role BBP000.
Question 1: How can we create the R/3 Plant PL01 in CRM as BP #PL01 (i.e. using an external number range)?
Question 2: How can we create the Plant, Customer & Vendor as a single CRM BP #?
Points will be rewarded.
Thanks,
J

Jim,
The problem you face is that CRM is going to download those as three separate partners.
Note 865321 gives a solution on how to load plants into CRM in an external range that you would specify. This is however for DNL_PLANT.
Your next issue is unless your plant as customer and your plant as a vendor are in separate account groups for each, you won't be able to map these into a single business partner in CRM, unless you do some manipulation.
I guess what you could do on an initial load for those objects is the following:
1. If the customer or vendor is a plant:
- Remanipulate the BDOC so that it becomes the single "plant business partner", on the ERP side.
2. For delta's you will need to also do this remanipulation.
3. If you plan on sending delta changes from CRM back to R/3 then on the CRM side you will need to decide how to distribute the changes from the single business partner back to the customer and vendor partners.
This is definitely possible, but it is going to take some effort and you will need a very seasoned middleware developer to make it happen. I am guessing a couple of weeks for a experienced middleware guru to complete this.
Good luck,
Stephen

How do I create an object on the fly

Hello there,
     I was wondering if it is possible to create an object on-the-fly. For example:- I have a class called Customer which holds the name, address and phone number of a customer. While the program is running I get a new customer, Mr Brown. How can I create a new Customer object which will hold the details of Mr Brown.
yours in anticipation
seaview

If I understood you right, you are thinking far too complicated.
So, when you click a button, a new object shall be created and stored. So basically you write a listener to your button that contains a method like this:
public void actionPerformed(ActionEvent e){
   Customer newCustomer = new Customer(textfield.getText());
   listOfCustomers.add(newCustomer);
}Maybe what got you confused is the object's name. Remember this: variables and field names DON'T exist anymore at runtime! They are just meant to help you when programming. If you want Mr. Brown as a customer, you have to provide a field in the customer class for the name. If a field is required for the existence of an object, you usually write a custom constructor for it, which accepts an according parameter.

How do i create a target class to target it to a Rule or monitor

Hi All,
How do i create a target class to target it to a Rule or monitor.
When we create a rule or monitor we target it to a specific class or classes of objects. Like in the example of the below screenshot.
I want to know how do i create my own custom made target for specific servers and point them to that target so i can select that when i create a rule or monitor.
Gautam.75801

Hi Xin
Guo,
I had already referred the link. The option (In the Select
a Management Pack Template pane, select Windows
Application (Registry) is not at all available on the Authoring TAB in either SCOM 2012 R2 nor 2007 r2.
Any idea where is it ?
Gautam.75801

How Do I Create a Unique Customer Number - eg: Member No

Similar Messages

Maybe you are looking for