How do I create a URL to filter a view when the value I have from list one is the ID that was used by list 2 to pull in the list 1 title?
My list "Tasks" has an record with Title = "Build SSIS for Duke Energy" and its ID is 1. Then I have a list "Journal" where I have tracked entries related to the progress of the task. When I create the Journal entries I passed
in the ID of the task 1 which then pulled the title into the Journal's Associated task lookup column. Now I'd like to have a column in the Tasks list that would have a URL to take me to all journal entries related to the Task. But passing in the ID 1 of the
task does not work.
If the lookup column has the actual Title from the task in all the time and it is not dynamically pulled every time the list is queried shouldn't I be able to filter on the Title e.g. "Build
SSIS for Duke Energy"
I ended up going with a workflow to build the URL and sending the title to the look-up column.
I tried the script at that site and ran into several problems. It didn't work with views that were grouped, the calculated links did not show on the edit and view forms. I assume those forms would have to be changed to run the script also.
In addition to, I have to add a CEWP to each view and I was also losing the "Items" and "List" options (next to "Browse") from the ribbon until I clicked around in the list.
What are the downfalls of a workflow? I ask because many people default to using a similar TextToHTML script like you mentioned.
Similar Messages
-
How do you change the language of the dictionary on Safari from English (US) to (UK)? I'm using Windows 7 Home Premium and the latest version of Safari for Windows that I know of. Cheers in advance
92matt wrote:
Cheers for the quick response, but do you know whow I would do that?
Apologies I'm not the most technical of people!
Open Regional and Language Options by clicking the Start button , clicking Control Panel, clicking Clock, Language, and Region, and then clicking Regional and Language Options.
Lupunus -
Hi, this question has been answered for 2013. The answer here suggests that it can be done in 2010.
See:
http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
Who knows how?
Regards
SanderHi Sander,
As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
How do I create a ".URL" file from a webpage I'm viewing
How do I create a ".URL" file from a webpage I'm viewing
The simplest way is to drag the "site identity button" (the padlock, for secure pages, and the globe, for other pages) to the desktop and drop it there. You may need to resize various window in order to be able to see the desktop while also viewing the site.
There is an add-on for sending a shortcut to Windows without having to use this method. I haven't tried it myself:
* Page on Add-ons site: https://addons.mozilla.org/firefox/addon/deskcut/
* Review describing an extra setup step if it's not working: https://addons.mozilla.org/firefox/addon/deskcut/reviews/490684/ -
How do I create individual URL for the pages within an Adobe Muse site?
Could someone tell me how I can create separate URL addresses for each page within a site? I think it's in Page Properties, but I can't figure out how to do it.
Your website is actually hosted at http://kcronaphotography.free.fr
If you visit that URL, clicking on the other pages will change the URL displayed in the browser.
Your individual pages are available at URLs like: http://kcronaphotography.free.fr/about.html
www.karincrona.com is just a wrapper page containing a frameset that hosts your real pages in frames.
It appears that this page was generated by a tool called "ORT - Ovh Redirect Technology".
Displaying the pages inside a frame will not change the URL displayed in the web browser.
If you'd like your page to have nice URLs like www.karincrona.com/about.html, you'll need to get rid of the frame wrapper, and move the domain name to the webhost where your pages are being served.
If you want to keep the wrapper page, you may want to investigate if the ORT tool you're using provides any way of getting a URL to an individual page to show in the browser bar. -
How to add a new url link in a view of an existing webdynpro component?
How to add a new url link in a view of an existing webdynpro component?
hi ,
refer SAP online hep :
Implementing Enhancements in a View
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/233f2189f74f08e10000000a114a6b/frameset.htm
To enhance the layout of the view, you can create new UI elements. This procedure is no different u2013 from a technical viewpoint u2013 from creating UI elements in components themselves. All UI elements created within the enhancement implementation can then be processed as usual.
Enhancements means inserting user developments into SAP development objects at predefined positions.
The Enhancement Framework enables you to add functionality to standard SAP software without actually changing the original repository objects, and to organize these enhancements as effectively as possible.
refernce :
have a look at this article
How to Create Enhancement Implementation in Web Dynpro ABAP
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/700317da-bd79-2c10-368e-8f18bf5d8b81&overridelayout=true
as pointed correctly by Saurav in earlier thread
regards,
amit -
How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
but not the usb iPhone i used to have.
And when i try to add a new one i dont get a USB option.
can some one help me please??
this is how it looks (after the bluetooth PAN i used to have USB iPhone option)The question would be more appropriate in the Mac forums as it is not really related to the iPhone.
-
How can I create a new TC backup with ethernet, so I don't have to wait two days for a new wireless backup?
Several times in the last year, I've gotten a message that Time Machine needs to completely redo my backup. Using the wireless connection, this takes almost two days. Is there a way to do the backup with ethernet and then switch back to wireless? Thanks.May I know what is needed to make sure the MacBook is able to see Time Capsule on ethernet?
Connect an Ethernet cable from one of the LAN <-> ports on the 2Wire gateway to the WAN port (circle of dots icon) on the Time Capsule.
If AirPort Utility cannot "see" the Time Capsule now, you will need to perform a "hard reset" by holding in the reset button for 7-8 seconds or so and then reconfigure the Time Capsule. You can use the same Time Capsule name and password, etc. as before.
Configure the Time Capsule to "Create a wireless network" and select the Bridge Mode option when it appears during the setup using AirPort Utility.
Once the Time Capsule is configured, restart the entire network again. Power down everything, start the 2Wire first and then start each other device after that one at a time about a minute apart.
Now you can connect your Mac directly to one of the LAN <-> ports on the Time Capsule for the backup using another Ethernet cable. In general, about 20-25 GB per hour will transfer.
The Time Capsule will broadcast a much faster wireless network than the 2Wire can provide, so you might want to leave the setup "as is" for awhile after the first backup is complete. If you decide to use the Time Capsule as your main wireless access point, you would want to turn the wireless off on the 2Wire since two wireless networks in close proximity can create interference problems.
Or, if you want to use the wireless on the 2Wire, you could turn off the wireless on the Time Capsule. Then backups will occur over the 2Wire wireless, or over Ethernet.
I don't really recommend the "Join a wireless network" setting on the Time Capsule for most users, but you could go back to that setup as well if you want after the first backup is complete. -
Question
I would like to be able to take a website that I use ofter and drop it on the firefox screen below the url. Then I will have a quick access. How do I do this? I currently use this on my laptop, but recently bought a new computer and downloaded firefox and lost a lot of features that I enjoyed.Hi Ruthannw,
I think you are talking about the [[Bookmarks Toolbar]]. That article will show you how to add sites to the toolbar and even how to display the toolbar if it is hidden in your new Firefox install.
Hopefully this helps! -
My daughters computer crashed along with her itunes library. She can plug it into my computer so how do we create her account on my computer? When we plug it in, it wants to replace her nano songs with my library.
Not quite surewhat your asking exactly. You look here for different ways on importing media from nano to your computer! https://discussions.apple.com/thread/2417169?start=0&tstart=0
-
How do you create a user defined functions UDF and passing a value like a ID to GEt a Value.
How do you create a user defined functions UDF and passing a
value like a ID to GEt a Value.
using a query.
are there example.
Thankstons of examples at cflib.org - good place to start, even
though many
udfs there are a bit outdated in their code...
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com -
how to reactivate an old apple ID that has some security issues? I can't acces the yahoo that was used to create that account because it was already recycled by yahoo.
So when I restore my iPad 2, it is asking me for my old apple ID that was no longer working.....
ANY HELP PLEASEHi marcpople,
If you have had an Apple ID disabled due to a security issue, you may find the following articles helpful:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Regards,
- Brenden -
A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account. even though account name may have been changed.
Just authorize the computer and retreive them.
Go here -> https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot .
FYI: you should have simply updated the AppleID with new info and continued to use it instead of creating a new one. -
Compressor is not working. When I export to compressor from FCP to encode DVD, FCP freezes and Compressor appears to be working but the progress bar never fills no files are created. I'm using a MacBook Pro 10.6.7 version 2.66 GHz core 2 Duo 4GB 1067 MH. I'm not new at this. I re-installed FCP successfully. I trashed the preferences. Please help.
Do you have any filters applied to your clips?
This happened to me before, I accidently had applied a broadcast safe filter to a color matte that was black....
I figured it out by duplicating my sequence and deleting items from my timeline 1 by 1 until I was able to export a reference movie.
Anywho, export again, this time with "self contained" movie selected.
Then try to import to Compressor. -
Dear sir,
i used this apple id in my IPAD 4,But some how i forgot the apple id password that was stored in my iPad. i reset the same in my another device. I put the new password in my I pad. Due to mismatching of password that was stored in iPad and new password ,it does not accept it. very unfortunately i also unable to connect my iPad with internet because it does not allow me to connect. In every second message displayed for apple id password. i am helpless. please help to get rid opt from this problem.
rgds
R K Hazarika
<Email Edited by Host>you manage the appleID on this site
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Maybe you are looking for
-
When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.
-
Hello - I'm pretty new to Motion and have 2 quick questions: 1) If you've got a bunch of keyframes on a timeline and want to make the entire sequence longer - is there a way to just pull the last frame out and have it automatically interpolate the ke
-
Automatic payment, ranking order
In FBZP, I maintain bank A as ranking order 1, bank B as ranking order 2, in vendor master data i maintain bank A as house bank in tab: payment transaction. Then i run F110, the payment will go to bank A automaticlly, if i want for several batch of p
-
Attribute Functions in Oracle Project Management Setup
I have been trying to find the functionality and applicability of the menu option " Attribute Functions" that is available in Oracle Project Management Setup. I have used attribute groups and context to create view / placeholders to capture additiona
-
Bandwidth manager with Solaris 10
Hi all I newbie with solaris and would like to test the IPQoS feature to use for bandwidth limit in a isp. I just readed the oficial IPQoS Sun tutorial but I looking for simples examples to limit the bandwidth per ip (clients). Someone knows where ca