How do I create an event which begins at a particular time and finishes on a later date at a particular time

iCal will only let me have an all day event for something which goes over a day, what about events that begin in the afternoon of one day and go on into the afternoon a few days later, when I have tried inputting this into ical the event only shows up on the first day

This is a duplicate post.
I built a basic Checkbox web page. I want to add a time stamp everytime a check is made on the page. How do I do that?
Nancy O.

Similar Messages

How do I create an Event Handler for an Execute SQL Task in SSIS if its result set is empty

So the precedence on my entire package executing is based on my first SELECT of my Table and an updatable column. If that SELECT results in an empty result set, how do I create an Event Handler to handle an empty result set?
A Newbie to SSIS.
I appreciate your review and am hopeful for a reply.
PSULionRP

Depends upon what you want to do in the eventhandler. this is what you can do
Store the result set from the Select to a user variable.
Pass this user variable to a Script task.
In the Script task do whatever you want to do including failing the package this can be done by failing the script task, which in turns fails the package. something like
Dts.TaskResult = Dts.Results.Failure
Abhinav http://bishtabhinav.wordpress.com/

HT4528 how do I create an event in my calander that repeats the second thursday of every month

how do i create an event in my calander that repeats the second thursday of every month

This should get you started down the pathJust replace User data with your cluster and do the data integrity check in the value change event use a simple one button dialog to notify the user which values are out of compliance and disable and grey the OK button untill all conditions are met.
Jeff
Attachments:
Prompt(Date).vi ‏50 KB

How do you create a pdf which is in a readable view, rather than having to rotate the document?

How do you create a pdf which is in a readable view, rather than having to rotate the document?

This cannot be done with Adobe Reader. Do you have Adobe Acrobat?

How can I create Object Tag which supports Sun and MS JVM both.

Hi,
I have created object tag as shown below
<object classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
name = "TestApplet" height="0" width="0" >
<param name="code" value="com.apps.TestApplet.class" />
<param name="codebase" value="codes" />
<param name="archive" value="TestApplet.jar" />
</object>
The above tag is working fine with the below JVM combinations in Windows XP.
1) Only Sun JVM
2) Only MS JVM
3) Sun JVM & MS JVM
But these conditions are not working with Windows 2000.
How we can create object tag which will support for these two opertating systems?

I am not able to understand the problem. From my understanding, you have an applet which you are trying to display in a browser using <object> tag. If that is the correct then all it matters is the browser and the JRE�
For example the below code when put in a JSP or a HTML, will use JRE 1.6.0_01 that is available on the client machine. If that is not available on the client machine then it will try and download automatically in IE.
This below code is for IE� if you are using Mozilla Firefox then you need to change the �classid� attribute to �java: com.foo.bar.ui.MyClass�
<OBJECT ID="Gantt" classid = "clsid:CAFEEFAC-0016-0000-0001-ABCDEFFEDCBA"
              codebase = "http://java.sun.com/update/1.6.0/jinstall-6u1-windows-i586.cab"
              WIDTH = "980" HEIGHT = "495" ALIGN = "baseline">
               <PARAM NAME="cache_option" VALUE="Plugin">
              <PARAM NAME ="CODE" VALUE = "com.foo.bar.ui.MyClass" >
              <PARAM NAME="MAYSCRIPT" VALUE="true">
              <PARAM NAME ="cache_archive" VALUE = "Myjar.jar /" >
              <PARAM NAME = "type" VALUE = "application/x-java-applet;jpi-version=1.6.0">
              <PARAM NAME = "scriptable" VALUE = "false">
              <strong>
                 This browser does not have a Java 1.6.0_01 Plug-in.
                 <br />
                 <a href="http://java.sun.com/update/1.6.0/jinstall-6u1-windows-i586.cab">
                   Get the latest Java Plug-in here.
                 </a>
          </strong>
        </OBJECT>

How do we create a promotion which is not out of the box?

hello,
how do we create a promotion which is not out of the box?

Hi,
You can create a new item item descriptor in /atg/commerce/pricing/pricingModels.xml.
~ Praveer

HT204053 I have one apple ID that my entire family has been using. How do I create new apple ID's for each of us and move the appropriate content to each new ID from the original apple ID now that we all have our own devices?

I have been using one apple ID for 4 family members. Up until now it hasn't been a problem but now that we all have our own devices how do I create new apple ID's for each of us and them move the approprioate things from the original apple ID account to the new ones for each of us?

stuartx4 wrote:
Thanks Csound1, wish I have seperated everything from the beginning but when your kids are little and start buying music etc it just didn't seem like an issue.
That has a familiar ring to it

How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi ‏244 KB

I didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.

How do I create an Adobe id link between my home computer and my computer at work? Want to be able to read books i download at home, at work.

how do I create an Adobe id link between my home computer and my computer at work? Want to be able to read books i download at home, at work.how do I create an Adobe id link between my home computer and my computer at work? Want to be able to read books i download at home, at work.

In that case, does anybody know of a program or workaround that will make this so?

How do I re-download videos which have been uploaded onto iCloud and deleted from my device?

How do I re-download videos which have been uploaded onto iCloud and deleted from my device?

Hi yvrtoakl,
I'm sorry, I'm a bit unclear on what you mean by "uploaded onto iCloud". If you are referring to videos synced to iCloud using the new iCloud Photo Library feature, you may find the following article helpful:
iCloud Photo Library beta FAQ - Apple Support
On the other hand, if you are talking about video files that have been stored on iCloud using iCloud Drive, then this article may be of more use:
iCloud Drive FAQ - Apple Support
Regards,
- Brenden

How do I create a list which compiles data from all lists on the sharepoint?

I have many pages to my sharepoint which all have separate task lists. On my overview page I want to create a list so that all the tasks and data inputted into the other task lists on the site are compiled together in one list. This way I have a long list
of tasks in one place, without going to each list. How would I do this?
Thanks!

Hi,
Based on your description, my understanding is that you want to collect all the task items on a site to one task list.
For accomplishing your request, you can create a Reusable Workflow.
Open your site with SharePoint Designer 2013->create a Reusable Workflow named task, choose 2010 platform and Task content type->choose Copy List Item Action->Copy current item to you target task list.
Then in every task list, create a workflow based on the new reusable workflow.
Besides, you can use Project Summary web part or Content Search web part to accomplish collecting all task items.
If there still exist some problems, Please feel free to let me know.
Best Regards,
Lisa Chen

How do I create an event (LEOPARD) then export for email?

I want to create an event, export in leopard, then email with an alarm for someone on a MAC using TIGER. Tried this but it exported the whole calendar. Please advise.
Thanks

Depends upon what you want to do in the eventhandler. this is what you can do
Store the result set from the Select to a user variable.
Pass this user variable to a Script task.
In the Script task do whatever you want to do including failing the package this can be done by failing the script task, which in turns fails the package. something like
Dts.TaskResult = Dts.Results.Failure
Abhinav http://bishtabhinav.wordpress.com/

How do you create a PDF which others can type text in to?

Hi,
I need to create a pdf which others can type into and select options (a booking form). Anyone come across this?
Thanks

It's relatively easy to produce interactive forms with InDesign CS6/CC and complete them in Acrobat. The forms can include text boxes, radio buttons, tick boxes, drop down menus and so on. It's important to know how to save the form in Acrobat for distribution so that users can save the data once they've entered it. Lynda.com has some useful tutorials, for example: http://www.lynda.com/InDesign-tutorials/InDesign-CC-Interactive-Document-Fundamentals/1290 05-2.html?srchtrk=index:1%0Alinktypeid:2%0Aq:Indesign%0Apage:1%0As:relevance%0Asa:true%0Ap roducttypeid:2
It's also useful to learn how to Replace an InDesign page in Acrobat when you want to update a form. I also suggest you make duplicates of your InDesign forms as once you have converted the form in Acrobat for distribution you can't change it at that stage.
I suggest you produce some short practice forms before you commit yourself to the real thing so you can see what can and can't be done.
Derek

How do i create a closing which shows on every outgoing email automatically, please ?

procedural question: how do i create a closing line which automatically appears on every outgoing email? thanx!

Nope, nothing happens...
I don't know how Apple does it but it is definetly something on the CD itself when you burn it; I've tried it with Disk Burner, Disk Utillity and Toast, but I can't trigger it.
Anyone who knows how I can pull it off ?

How should I create JAR file which contain JMF library and project classes

Hi,
I installed the JMF windows pack. I compiled and ran successfully myApplet (which use JMF librarie) in Internet Explorer on my machine. When I run this applet on some different machine, where JMF isn�t installed- it�s not running.
There is an error:
java.lang.NoClassDefFoundError: javax/media/ControllerListener
I was trying to create jar file, which contain librarie JMF.jar and all other files which are require to run myApplet (*.jar, *.class, the files from folder �MyApplet�) and run it on the other computer. It still doesn�t work.
Also I ran a JMF Customizer and created customize.jar but this file contains only JMF classes. I don�t know how add other files to it.
How should I create a jar file which will contains all essential files to run myApplet on other machine (something like �All In One� J )
I�m using Eclipse.
Can somebody help me?.
Thank You!
Best regards:
Peter

Hi
i want to make a jar file of application which is using JMF to play audio
and video. it works well during compilation and execution but doesn't
works in jar file.
please help me how i make a jar file whic will run audio and video too
your's truely
abdul

How do I create an event which begins at a particular time and finishes on a later date at a particular time

Similar Messages

Maybe you are looking for