How do i create an variable on an infoobject to use it in transformation

Hello all,
i do need to create an varaible, that i want to use in a currency conversion to specify the rate type. I didn't find in documentation and in this forum... can anyone help me?
thanks a lot and
Kind Regards
Wolfgang
Edited by: Wolfgang Pietsch on Jan 22, 2009 11:27 AM
Edited by: Wolfgang Pietsch on Jan 22, 2009 11:54 AM

Hi,
In order to specify value for Currency rate type Dynamically you need to create variable for info Object 0RTYPE and the same can be used in Currency conversion.
Use this info object in any of the infocube say ZTEST_C01 and create a dummy query ZTEST_Q1 based ZTEST_C01...
In the query you  can create variable based on the Info Object 0RTYPE.
After this you can use the same in the currency conversion creation.
for More information
http://help.sap.com/erp2005_ehp_04/helpdata/EN/ec/076f3b6c980c3be10000000a11402f/frameset.htm
Hope this helps
Regards,
Rangzz

Similar Messages

  • How do I create a variable video delay of a live stream...

    I have a live video feed from my webcam in my Flash Application. I have a second video window next to it that I want to place a variable delayed video of the live stream. Therefore, I need to save the video stream in memory/disk and create this variable delay, say 5-60 seconds. As well as, continue to capture the live stream. The camera I am using suppots H.264 encoding.
    How do I create a variable length queue or buffer to hold the video stream coming into the flash application. Do I create a memory variable or write this to disk ? I have been looking over the ActionScript 3.0 documentation and I can not figure out how to code this either way ( as a memory variable or write to disk queue ).
    I want to be able to change the delay, view the delay stream in slow motion and scrub through the delayed stream.
    I would like to do this with out having to use Flash Media Server.
    Thanks,
    Bob

    I am sure it is practically impossible to accomplish that on the client side. Although theoretically it is conceivable to use NetStream.appendBytes() but it requires an extremely complex implementation.
    I suggest you look into FMS DVR capacities:
    http://help.adobe.com/en_US/flashmediaserver/devguide/WS236AE81A-5319-4327-9E44-310A93CA09 C6Dev.html

  • How do I create a variable name on the fly?

    Hi,
    If I have a String containing a value, how do I create a variable name using that value during program execution? That is if I have
    String fred = "newvar";
    How do I then create a new String with the name "newvar" (using the contents of fred)? I will never know what the content of fred is until this point. What I'd like to be able to do is something like
    String fred.subString(0) = "a new value";
    Obviously this won't work but if it did the statement would evaluate to something like
    String newvar = "a new value";
    Appreciate any help you can give,
    Dave.

    Here u go:
       private JCheckBox AddCheckBox( String strText, int nTextID )
          JCheckBox checkbox = null;
          Class checkboxDefinition;
          Class[] stringArgsClass = new Class[] {String.class};
          Constructor stringArgsConstructor;
          Object[] stringArgs = null;
          String arg = "";
          arg = "CheckBox" + nTextID;
          String label = new String(arg);
          stringArgs = new Object[] {label};
          try
            checkboxDefinition = Class.forName("javax.swing.JCheckBox");
            stringArgsConstructor = checkboxDefinition.getConstructor(stringArgsClass);
            checkbox = (JCheckBox) createObject(stringArgsConstructor, stringArgs);
            checkbox.setName(label);
            checkbox.setText(strText);
            checkbox.setSize(new java.awt.Dimension(CQuestionBase.PAGEWIDTH, 21));
            checkbox.putClientProperty("1",new Integer(nTextID));
            checkbox.setVisible(true);
          catch (ClassNotFoundException e)
            System.out.println(e);
          catch (NoSuchMethodException e)
            System.out.println(e);
          return checkbox;
       }This code was based on an example I found about two years ago. You can use the same methodolgy to create objects of any kind. Again, look at java.lang.Reflect.

  • How can I create a variable size array?

    How can I create a variable size array?

    ok then how can i create a new vector object?If you don't know that, you need to go back to your text book and study some more. Or read the tutorial on the basics of Java: http://java.sun.com/docs/books/tutorial/java/index.html
    After reading that you can move on to: http://java.sun.com/docs/books/tutorial/collections/index.html
    Anyway, the answer to your question is, of course:
    Vector v = new Vector();(But you should probably use ArrayList instead of Vector.)

  • How can i create "bind variable"

    How can i create "bind variable" in my DB to support any procedure in my DB.
    Thank you very much.

    In SQL*PLUS we can defined bind variable
    SQL>var x varchar2(250); -- Is x bind variable or i'm misunderstand ?
    and ... in my procedure i can used ' &x ' to pass valued of 'x' from sql prompt to my procedure.
    but i'm not sure variable x is still remain in DB because i need to pass variable
    " v_stmt := 'and employee_id between ..... ' " from FORM to PROCEDURE in DB
    how can i do

  • How do I create an 'upload facility" for my website using Muse.

    How do I create an 'upload facility" for my website using Muse.  We are a print company and is how we receive most of our work.
    Iain

    Hey Iggy,
    These might help:
    Muse
    http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-muse-what-is-business-catalyst
    http://tv.adobe.com/watch/introducing-business-catalyst/getting-started-with-business-cata lyst-and-muse-creating-and-publishing-sites
    -Dave

  • HT201342 How do I create a new iCloud account to be used as an email address only

    How do I create a new iCloud account to be used as an email address only?

    Howdy shark byte,
    This first article details how to set up an additional iCloud account as just an e-mail account on your iOS device.
    iOS: Setting up an email account
    http://support.apple.com/kb/HT4810
    Cheers,
    Allen

  • How do i create a styled spry mysql driven menu using dreamweaver cs4?

    How do i create a styled spry mysql driven menu using dreamweaver cs4?
    I have cs4. I gave up on using MS sql as a datasource. I finally got a php successfull connection in my PHP web page.
    I would like a nice video tutorial for creating a dynamic menu.
    I guess i can style it by attaching a css file to the page. Are their any already designed css files out there in some online area?
    i am not a good designer. so i would like to simply have a collection of menu_style.css files and choose what looks good.
    But first i need to build the spry menu from the mysql database.
    Any help is apprechiated.
    My first choice was to maintain the data in an MS sql server file. If i could directly attach to an ms sql datasource then that would be the best option.
    I dont think i want to have to re-generate an XML datasource each time i add or modify the menu. I would like to maintain the MS Sql or mySql file instead.
    If i could generate an XML datasource from the MS Sql database then I may even prefere that, but i have spent a lot of time trying to figure out how to do that and not had any success. So i prefere working in MS sql but would settle for mySql if i had to.
    Thanks
    Jerry

    To create a dynamic menu take a look here http://labs.adobe.com/technologies/spry/samples/menubar/MenuFromNestedData.html#
    The XML file for the above menu looks like this
    <?xml version="1.0" encoding="utf-8"?>
    <items>
         <item id="0001" type="donut">
              <name>Cake</name>
              <ppu>0.55</ppu>
              <batters>
                   <batter id="1001">Regular</batter>
                   <batter id="1002">Chocolate</batter>
                   <batter id="1003">Blueberry</batter>
                   <batter id="1003">Devil's Food</batter>
              </batters>
              <topping id="5001">None</topping>
              <topping id="5002">Glazed</topping>
              <topping id="5005">Sugar</topping>
              <topping id="5007">Powdered Sugar</topping>
              <topping id="5006">Chocolate with Sprinkles</topping>
              <topping id="5003">Chocolate</topping>
              <topping id="5004">Maple</topping>
         </item>
         <item id="0002" type="donut">
              <name>Raised</name>
              <ppu>0.55</ppu>
              <batters>
                   <batter id="1001">Regular</batter>
              </batters>
              <topping id="5001">None</topping>
              <topping id="5002">Glazed</topping>
              <topping id="5005">Sugar</topping>
              <topping id="5003">Chocolate</topping>
              <topping id="5004">Maple</topping>
         </item>
         <item id="0003" type="donut">
              <name>Buttermilk</name>
              <ppu>0.55</ppu>
              <batters>
                   <batter id="1001">Regular</batter>
                   <batter id="1002">Chocolate</batter>
              </batters>
         </item>
         <item id="0004" type="bar">
              <name>Bar</name>
              <ppu>0.75</ppu>
              <batters>
                   <batter id="1001">Regular</batter>
              </batters>
              <topping id="5003">Chocolate</topping>
              <topping id="5004">Maple</topping>
              <fillings>
                   <filling id="7001">
                        <name>None</name>
                        <addcost>0</addcost>
                   </filling>
                   <filling id="7002">
                        <name>Custard</name>
                        <addcost>0.25</addcost>
                   </filling>
                   <filling id="7003">
                        <name>Whipped Cream</name>
                        <addcost>0.25</addcost>
                   </filling>
              </fillings>
         </item>
         <item id="0005" type="twist">
              <name>Twist</name>
              <ppu>0.65</ppu>
              <batters>
                   <batter id="1001">Regular</batter>
              </batters>
              <topping id="5002">Glazed</topping>
              <topping id="5005">Sugar</topping>
         </item>
         <item id="0006" type="filled">
              <name>Filled</name>
              <ppu>0.75</ppu>
              <batters>
                   <batter id="1001">Regular</batter>
              </batters>
              <topping id="5002">Glazed</topping>
              <topping id="5007">Powdered Sugar</topping>
              <topping id="5003">Chocolate</topping>
              <topping id="5004">Maple</topping>
              <fillings>
                   <filling id="7002">
                        <name>Custard</name>
                        <addcost>0</addcost>
                   </filling>
                   <filling id="7003">
                        <name>Whipped Cream</name>
                        <addcost>0</addcost>
                   </filling>
                   <filling id="7004">
                        <name>Strawberry Jelly</name>
                        <addcost>0</addcost>
                   </filling>
                   <filling id="7005">
                        <name>Rasberry Jelly</name>
                        <addcost>0</addcost>
                   </filling>
              </fillings>
         </item>
    </items>
    Then remains the manner in which you create the XML file which can be found here http://labs.adobe.com/technologies/spry/samples/utils/query2xml.html
    One you have your menu up and running, you will be able to apply styles and effects

  • How do i create mailing labels for an avery template using pages

    how do i create mailing labels for an avery template using pages.

    mcc,
    The first topic in the "More LIke This" box to the right of your question is a rather comprehensive address label printing discussion. Does it answer your question?
    Jerry

  • How do you swap two variables A and B without using a 3rd variable?  No fun

    How do you swap two variables A and B without using a 3rd variable? No function or method allowed.
    For example:
    Given:
    A = 35
    B = 10
    Result
    A = 10
    B = 35

    How do you swap two variables A and B without using a
    3rd variable? No function or method allowed.
    For example:
    Given:
    A = 35
    B = 10
    Result
    A = 10
    B = 35
    A = A + B  (A = 35 + 10 = 45)
    B = A - B (B = 45 - 10 = 35)
    A = A - B (A = 45 - 35 = 10)

  • How do you swap two variables A and B without using a 3rd variable?

    How do you swap two variables A and B without using a 3rd variable? No function or method allowed.
    For example:
    Given:
    A = 35
    B = 10
    Result
    A = 10
    B = 35

    How do you swap two variables A and B without using a
    3rd variable? No function or method allowed.
    For example:
    Given:
    A = 35
    B = 10
    Result
    A = 10
    B = 35
    A = A + B  (A = 10 + 35 = 45)
    B = A - B (B = 45 - 35 = 10)
    A = A - B (A = 45 - 10 = 35)

  • How do you create a still image from a video using IMovies 11?

    How do you create a still image from a video using IMovies 11 on a Pro Mac?

    The simplest way is to do a simple screen capture.  

  • How will i create physical directory in oracle pl/sql using java

    how will i create physical directory in oracle pl/sql using java

    This is, I suspect, related to Re: how will i overcome from this error java.io.IOException. Quite why you felt the need to have two partial threads instead of one thread with a complete set of information is beyond me. Perhaps this muddled thinking is indicative....
    Anyway, if I was looking to do this particular task in Java I would look to using the specific command File.mkdir() rather than trying to use a generic exec approach.
    Cheers, APC

  • How to create Presentation variable for columns and to use it in Narrative?

    Hi All,
    Anybody know how to create presentation variable for a column (i.e., i need to create it in edit formula section itself). And then, I should use it in Narrative section to display that column value. Is it possible? Or do i need to use any other variable for this requirement? If so please let me know, how to create it? This is very urgent requirement.
    Thanks in Advance
    Thenmozhi

    Hi Satya,
    I just want to create a table that should horizontally display the values like below:
         SUID Tag # :123456               Year Mfg: 2007                                                                                     
         Description: computer corporation FA ID#: 4576
         Model Number: 4569 hESC: #ert
         Serial Number: 78945 Flags: c
    Department: Hematology
    User: thenmozhi
    Database: OLAP
    I think we can create this type of report using either Narrative or Static Text. But I am not sure whether it is possible or not? And also another thing is that sectioning is applied for SUID Tag # column. So, depending on the dashboard prompt if the SUID Tag # retrieves two or more values.
    Then the first value for example 123456     and the values for the other columns related to this SUID Tag # value should display in the first page (i.e., page 1). And if the next value of the SUID Tag # for example say 678901 then the values should move to second page that is like this:
         SUID Tag # :678901               Year Mfg: 2008                                                                                     
         Description: Computer Manufacturing FA ID#: 4577
         Model Number: 4570 hESC: #eth
         Serial Number: 78946 Flags: G
    Department: Hematology
    User: Rehman
    Database: OLAP
    Thanks
    Thenmozhi

  • How do I create a disk image for windows 7, using a windows computer for USB bootcamp for mac?

    Hi There, I have just bought a new 2013 iMac.
    Spec: 3.4 GHz intel core i5, 16GB 1600 MHz DDR3 Memory , NVIDIA GeForce GTX 775M 2048 MB Graphics with OS X 10.9.4.
    How can I create a 'disk image' from a windows 7 professional 64bit installation DVD using a windows laptop with windows 7 Operating system on? I want to transfer this 'disk image' (ISO?) to a USB ready for installing windows onto my 2013 iMac using bootcamp?  I want to use bootcamp from a USB as I have no disk drive for the installation DVD on my iMac. I hope all this is clear.
    Thank you. Joe

    Yes, that's correct, at least not directly. You can create a blank disk image, copy the file to the mounted disk image, then burn the image to a CD/DVD.
    Open Disk Utility and select Blank Disk Image from the New menu. Provide a name, Save location, and select the image size from the drop down menu. Leave Encryptions at None and Format as read/write. Click on the Create button.
    After the image file appears the "removable" disk should be automatically mounted. If not double-click on it to mount it. A "removable" disk icon will appear. Drag the file you want to place on the disk image to the "removable" disk icon. The eject the "removable" disk icon. Now select the disk image file in the DU left side list and click on the Burn icon in the DU toolbar. Be sure to have a blank disc ready.
    The above is actually the "long" way to do this. A much easier way is to simply insert a blank CD or DVD into the optical drive. The Finder will pop up a dialog asking what to do. Select the option to mount on the Desktop. You will now see a disc icon on the Desktop. Drag the file you want to burn to the CD/DVD, right-click or CTRL-click on the disc icon and select Burn from the contextual menu.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Maybe you are looking for