How do I create this drop down menu?

I've been trying to figure out how to achieve this animated drop down menu and I just can't. I've gotten somewhere in between (animation using the accordion panel, and the rollover effect using the composition).
Any help would be appreciated. This is the example of what I'm trying to achieve.
Military Retirement Community Washington DC | Falcons Landing
Thanks!

Hello,
you can create the same dropdown using tooltip composition Widget but the only transition that you can add on rollover and rollout will be fading.
Please check the attached file.http://adobe.ly/1IxxKfO
Another alternate will be to create an animation in edge animate and use it in Muse as OAM File.
Regards
Vivek

Similar Messages

How can i create a drop down menu for set qty in my store?

I'm wondering how i can create a drop down menu for the qty module that sits on the individual product page. My client sells in quantities of 6 packs. I currently have the minimum order at 6 but i would like to give consumers the option for 6,12,18...and so forth. I was told that it could be accomplished? Hopefully someone can help me.

Hi Chris -
Thank you for your reply! I had seen your article before, and just now again attempted to follow it, but I get stuck. There are two things that I'm confused by.
First off, toward the top, referring to the initial button, you say to add this interaction:
ON CLICK; Play Transition to comboBox: selected
ON ROLL OUT; Play Transition to comboBox normal if comboBox is in over state
ON ROLL OVER; Play Transition to comboBox over if comboBox is in normal
However, I do not see these transition options. When I select the button, the only interactions I have are to Play transistion to state, Play action sequence, Go to URL, and two for videos. So that's the first roadblock for me.
But, trying to get passed that, I went down to the portion of the article that refers to adding interaction to the dataset items. Again, I don't get it, as I see no way to add interaction to a dataset item. When I open my design-time data menu, I do see the items, and am able to rename each item, add additional rows, and change the shape of the datalist layout. However, I see no way to add an interaction to a dataset item. I must be missing a step ... Can you help with this?
Again, thank you!
Amy

How do i create a drop down menu for selecting from the drop down arrow

how can i create a drop down menu so that when i click on the arrow in the cell i can select from the menu that appears

katiesandell wrote:
how can i create a drop down menu so that when i click on the arrow in the cell i can select from the menu that appears
Hi Katie,
Welcome to Apple Discussions and the Numbers '09 forum.
Numbers vocabulary for this feature is a "Pop-up Menu". It's available as a Cell Format, and is set and edited in the Cell Format Inspector.
See "Using a Checkbox, Slider, Stepper, or Pop-Up Menu in Table Cells" starting on page 96 of the Numbers '09 User Guide.
This guide, and the equally useful iWork Formulas and Functions User Guide are available for download through the Help menu in Numbers.
Regards,
Barry

How do I link this drop down menu created in Fireworks when I export to dreamweaver, Help!

Hello everyone,
Thank you in advance for dealing with my inexperience and answering my question.
I have been stuck on this for wayyyy too long. Here is my problem. I created a drop down menu for a portfolio website I am building. When I pull this into Dreamweaver the way to link the menu items to the pages is elusive. I have no idea what to do. Please help?
Here is the screenshot. Thank you very much Jennifer
OK, Well no one can actually see this image since it came in so small, but please help me anyway if you can?

Thank you for answering my question. I created the graphics in photoshop, sliced them in fireworks and now I am pulling the site in dreamweaver to link it. The dropdown is just a little dropdown menu. I created it in Fireworks because when I tried to create one in Dreamweaver I had to use a spry which was even harder to figure out and get to work. If I knew Html or CSS my life would be much easier but I don't. I don't have much time to learn it right now since I work over time all week, do graphics freelance and I go to school for computer science. I need to get this site up and I just want a fast little fix to get it up. When I have time to learn more I can make this site better or start a better site, but for right now it just needs to work. Is there a way to get what I have working so I can just get this site up. Later I will have more time and more experience to do this better. I am learning so thank you for your experience.
Thanks,
Jennifer

How do I create a drop down menu with Code Snippets and Flash CS5?

Hi
I am wondering how to create a drop down menu using the Code Snippets and CS5?
There are some older tutorials out there and it would be nice if someone could create an updated drop down menu tutorial, and it might be me doing this after I have figured out the best and easiest way to create one, but before that I need some pointers.
Thanks!
Have a great day!
Paal Joachim

You can use panel widget to create manual menu where set to show target on rollover.
Something like this :
http://muse.adobe.com/exchange-library/menu-vertical-accordion-widget-1
http://muse.adobe.com/exchange-library/tiptop-navigation-menu
Thanks,
Sanjit

How do I create a drop down menu with multiple items in Adobe Acrobat 9?

I am trying to create a drop down menu with four items within a field box. When I try to do this
the font is too big and it just doesn't fit.

You can use panel widget to create manual menu where set to show target on rollover.
Something like this :
http://muse.adobe.com/exchange-library/menu-vertical-accordion-widget-1
http://muse.adobe.com/exchange-library/tiptop-navigation-menu
Thanks,
Sanjit

How do i create a drop-down menu in SharePoint that redirects to a new page?..

Helly everyone, i have a question and really hope someone can help me out here:)
In SharePoint i want to create a drop-down menu that has the possibelty to redirect to other websites.
I fount the code below and it works but just not in SharePoint:(
It only shows the drop-down list but it doesn't redirect you to another website if you click on a site.
Can someone please help me out because it's really getting frustrating.
<form method="post" action="" name="">
<select name="select15" onChange="window.open(this.options[this.selectedIndex].value,'_parent')">
<option selected>Please Select Site to Visit</option>
<option>---------------------------------------------------</option>
<option value="http://leedssocialclubs.co.uk">Leeds Social Clubs </option>
<option value="http://yahoo.co.uk">Yahoo </option>
<option value="http://msn.com">MSN </option>
<option value="http://Moonfruit.com">Moonfruit </option>
<option value="http://burystaffhire.moonfruit.com/#/home/4548482603">Bury Staff Hire</option>
</select>
</form>

<form>
<select name="URL" onchange="window.location.href=this.form.URL.options[this.form.URL.selectedIndex].value">
<option value="">Choose a site</option>
<option value="http://webdesign.about.com/">Web Design Front Page</option>
<option value="http://webdesign.about.com/library/beginning/bl_begin.htm">
Beginning HTML</option>
<option value="http://webdesign.about.com/od/javascript/">JavaScript Help</option>
</select>
</form>
Demo url
http://webdesign.about.com/od/examples/l/blfaqddredirect.htm
script url
http://webdesign.about.com/od/javascript/a/aa050701a.htm
For me it is working fine

How can I create a drop down menu from an array

Hello all,
I am attempting to create a subvi that allows the end user to add a part number to an .txt file, and assigns that part number a value than can be used to select one of two modes of communication to be used to write to a EEPROM. I am using the "write key.vi" and the "read key.vi" to create and read the .txt file. What I would like to do is is use "get section names.vi" to read all of the part numbers and dump them into a drop down menu after the end user generates the file using the subvi.
I guess my question is how do I dump a 1D string array into a drop down menu.
I have attached some semi-functional .vi's to give an idea of what i am attempting to do.
Erik
Attachments:
FirsttryPN.vi ‏15 KB
PNwrite.vi ‏16 KB

Place a Ring control on your front panel, then create a property node on the block digram. You can wire the output array of "Get Section Names" to populate the Strings[ ] property of the Ring.
Retrieve the specific string selected by the operator by wiring the Ring control to the Index Array function.
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

How do I create a drop-down menu in Numbers?

Just a simple question - wanting to create options in a column I've created (similar to the drop down menu above, when you select font size or font type.
Thanks!

select the cell(s) you want to contain a pop-down menu, then open the cells inspector:
then set the items in the inspector by double click each item and editing the contents:

How do i create a drop down menu???

This is nothing to do with creating a run-time menu, rather it is to do with creating a sort of drop down or drop up menu selection with three or more options. I want to have a button at the buttom of the front panel, when you click on it, a menu which contains some options should appear (kind of Start button menu in Windows), and after chosing one option it disapears (the menu). How do i do it in LabView. Thanks

you can create an event structure that will trigger an event upon a button hit. Now you will have to be careful when using an enum if you want to populate it dynamically. You cannot write directly to the strings property of an enum. I would suggest using a text box and right clicking on it to create a property node. Once you have created the property node then write to the strings property and you will be able to write an array of strings. You can programmatically remove your options from that array before writing it based on what button was hit. Hope this helps.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor

How do I create a drop down list to e-mail a form for signature.

The desired workflow is for
1)      Firefighter 1 to complete the top portion of the Agreement
section, sign in the Firefighter 1 signature field (which locks the top
portion of the Agreement Section), then select Firefighter 2 from the
e-mail drop down list and e-mail the PDF form to Firefighter 2;
2)      Firefighter 2 opens the e-mail and the PDF attachment,
completes the second portion of the Agreement Section, sign in the
Firefighter 2 signature field (which locks the bottom portion of the
Agreement Section), select Lieutenant 1 from the e-mail drop down list
and e-mail the PDF form to Lieutenant 1;
3)      Lieutenant 1 opens the e-mail and the PDF attachment, checks
the approved box, signs the Lieutenant 1 signature field, select
Lieutenant 2 from the e-mail drop down list and e-mail the PDF form to
Lieutenant 2;
4)      Step three continues through Lieutenant 2, Battalion Chief 1
and Battalion Chief 2
5)      Battalion Chief 2 sends the fully completed form back to
Firefighter 1 who copies the completed form to Firefighter 2
Note: if any of the officers disapprove the agreement the disapproved
form is immediately sent back to Firefighter 1

katiesandell wrote:
how can i create a drop down menu so that when i click on the arrow in the cell i can select from the menu that appears
Hi Katie,
Welcome to Apple Discussions and the Numbers '09 forum.
Numbers vocabulary for this feature is a "Pop-up Menu". It's available as a Cell Format, and is set and edited in the Cell Format Inspector.
See "Using a Checkbox, Slider, Stepper, or Pop-Up Menu in Table Cells" starting on page 96 of the Numbers '09 User Guide.
This guide, and the equally useful iWork Formulas and Functions User Guide are available for download through the Help menu in Numbers.
Regards,
Barry

HT5610 How can You authorise your Windows Vista computer??? I do not get this drop down menu nowI cannot get this here, have been trying for hours, why is this so uncooperative? My first impression of I tunes is not so good after that.

How can you authorise your windows vista computer to play stuff you downloaded from itunes??? I cannot get this drop down menu shown on your support pages whatever I do. I have been trying for ages. This is not a good first impression.

Authorize a Mac or PC
Review the following before you authorize a computer:
You can authorize up to five computers with your Apple ID.
You must authorize your computer to download past purchases, use Home Sharing, or use the Automatic Downloads setting.
You can play unprotected music that's in the AAC file format without authorizing your computer. This includes iTunes Plus tracks and content from sources other than the iTunes Store, like your audio CDs.
To authorize a computer, follow these steps:
Open iTunes.
Choose Store > Authorize This Computer from the menu bar.
You may need to show the menu bar to see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
Enter your Apple ID and click Authorize.
If your Apple ID uses an expired MobileMe account, you can still authorize your computer.
In some cases, iTunes may ask you to authorize the computer again. iTunes should use the same authorization as before if the computer is in your list of authorized computers.
Learn what to do if iTunes repeatedly asks you to authorize when you try to play your content.
http://support.apple.com/kb/ht1420
Note : If you are Unable to see the Store Tab on your iTunes then click anywhere on your iTunes and press
Ctrl + B key on your keyboard once and you should be able to see the Store tab in your iTunes.

Creating a Drop Down Menu Attached to Existing Rovvover Menu Buttons

I am working on a website, and I was wondering if one can create a drop down menu for existing buttons. I looked over directions for adding drop down menus for iWeb (http://iwebfaq.org/site/iWebTeardown.html) but wondered how difficult it would be to connect them to the rollover buttons that I am already using in my menu bar.
Here is my draft site: http://web.me.com/toesproductions/AFW/Home.html
Thank you for any advice or help you maybe able to provide.

In iWeb you use the HTML Snippet to paste the code for the dropdownmenu.
You have to find the code first.
[Using the iWeb HTML Snippet|http://www.wyodor.net/blog/archives/2009/07/entry_213.html]
You can also add the code directly with a JavaScript :
http://www.wyodor.net/_Demo/tmf/Duckmenu.html
http://www.wyodor.net/_Demo/tmf/TMF.html
This is the JavaScript :
http://www.wyodor.net/_Demo/duckmenu/tmf.js
It searches for a textbox with the word DIVmenu in it and replaces it with the code.
You may have to learn HTML/CSS/JavaScript and how iWeb creates its webpages.

Trying to create a drop down menu in numbers...please help

Hi
Can anyone indicate how to go about creating a drop-down menu.
Thanks in advance

Hi Meela,
Welcome to Apple Discussions and the Numbers 08 forum.
Check page 66 of the Numbers User Guide supplied with your copy of iWork. The guide refers to them as "pop-up" menus, so a search using "pop-up" will be more successful than one using "drop down".
Essentially the process is:
Click on the cell to select it.
Open the Inspector and choose Cell Format (icon is a cell containing 42)
Click the Cell Format menu and select Pop-up Menu from the bottom of the list.
Double click an item in the list to edit it. Click the + button to add an item, the - button to delete the selected item.
Done.
Regards,
Barry

What is the best way to create a drop down Menu

It is my frist time using Dreamwaever CC and i was wondering if there was a jQuery UI widget that could make, creating a drop down menu easir.

*Best* is subjective and depends on what you require.
For multi-level CSS drop-menus, this one is nice:
DEMO:
http://www.red-team-design.com/wp-content/uploads/2011/11/css3-animated-dropdown-menu-demo .html
TUTORIAL:
http://www.red-team-design.com/css3-animated-dropdown-menu
RESPONSIVE:
Project Seven Responsive Tabs (commercial DW Extension)
http://www.projectseven.com/products/tools/tpm2/tutorials/responsive/index.htm
Pop-Menu Magic3 by PVII (NEW commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
MEGA MENUS:
http://www.designchemical.com/lab/jquery-mega-drop-down-menu-plugin/examples/
Nancy O.

How do I create this drop down menu?

Similar Messages

Maybe you are looking for