How do I detect a NI9862 module under FPGA

Hello,
I am trying to add NI9862 module under the FPGA target of NI9144 chassis. But I am unable to do so. Please see the attached image.
I read some of the earlier posts on the forum and I understand that some of these CAN modules need to be added in Offline mode, which is what I am trying to do. However, the list of C series modules doesn't have NI9862.
Help appreciated.
Thanks,
Rohan
Attachments:
2011sp1 ni9862 ni9144.png ‏343 KB

Hello Rohan, 
I see the CAN module 9862 listed here as being incompatible in scan mode with the 9144 chassis. Is this the documentation you were referring to?
Andy C.
Applications Engineering
National Instruments 

Similar Messages

  • How to Write\Read NI-9516 module in FPGA Project?

    Hi,
    I use NI-9149 RIO and NI-9516 module.
    I want to write to the 9516 throw the FPGA. 
    My project look like this:
    How can I do It?
    Thanks for advance,
    Aviad
    P.S: I read this paper, but don't know how to work throw it...

    Hi aviadCielo,
    I would use the cRIO in hybrid mode. We have a helpful KB on using 951x modules in hybrid mode (http://digital.ni.com/public.nsf/allkb/12287236ED86B789862576630059572C). From there you can create a virtual axis and program in SoftMotion. This will save you from having to do FPGA programming with the 9516.
    Let me know if this works or if you still have the issue.
    Michael Bilyk
    Applications Engineer
    National Instruments
     

  • How to find the existing function module is used in another function module

    Hi all,
    I created a function module and the same one is called from another function module.
    When I tried to find where the  first function module is used  using  Where-used List , I am getting the message "function module not found in selected areas" .
    Please  guide me what is other method to find whether the function module is used in another one.
    Thanks,
    Vengal Rao.

    hi,
    Go to UTILITIES-> Update Navigation index.
    or go to fucntion group and Generate the Funtion group once.
    it will detect all fucntion modules under that function group.
    regards,
    Rama

  • How to keep multiple function modules under one Web service

    Hi Experts,
    I have Three RFC function modules and i need to create one web service for these three RFC function modules. I know How to crearte a web service for one function module.
    please suggest me How to keep multiple function modules under one Web service.
    Thanks in advance
    Lakshminarayana

    Hi Lakshmi,
    The best way to do it is to assign all the three RFC Enabled FM's to one function group. Later on the top menu in Utilities you get an option to Create a Webservice from a Function Group.
    You can create one single Webservice using all the the 3 FM's.
    I hope this helps.
    Thanks,
    Manu

  • My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

    My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

    iPhone, iPad, or iPod touch not appearing in iTunes

  • How to create a Z Function Module

    Hi,
      I am trying to create a Z function module in BI 7.0 that i can use in Transformations.
    SE37> Name of FM.Create..>
    It is prompting me to enter Function Group.
    What is Function Group and How can i create a new function group (Detail Steps please)
    and steps involved in creating a Function Module in BI 7.0
    Thanks in Advance

    Hi,
    Function Group is just like a folder under which we can store n no. of function modules for organizational purpose. If u want any global declarations we will declare at function Group Level.
    It is mandatory to save a function module under one function group. Select Goto menu item, select Function Group, then select, create function group in SE37. Just give the technical name and description and save.
    Hope this helps u..
    Regards
    Ramakrishna Kamurthy

  • How do I detect MXI2 card programatically with VB or VC++

    How do I detect MXI2 card programatically in VB or VC.

    Sunil,
    A National Instruments PCI-MXI-2 and/or VXI-MXI-2 can be detected programatically a number of ways. The most fundamental and portable, and best code practice, is to use VISA functions detect and identify all VXI modules, including the controller (in this case, MXI-2). A "VISA Find Resources" function will provide a list of all controllers and instruments on the system. All VXI devices will be found with a VISA resource of the form "VXIx::LA::INSTR", where "x" is the system number (typically 0) and LA is the device's logical address. After you retrieve the list of all VXI devices with a "VISA Find Resources", you can then use "viGetAttributes" to read manufacturer and model from the instruments for specific identification.
    This method uses the VXI and
    VISA standards, so it will work not only with MXI-2, but any other controller you choose to use in the future, even if it is a non-National Instruments controller. This portability is one of the major advantages to using VISA.
    You can download VISA from the ni.com web page at the following link:
    http://digital.ni.com/softlib.nsf/display?ReadForm&lookup=NI-VISA&view=current&node=132060_US
    When you install VISA, you will have a an examples directory (for example, c:\vxipnp\Win95\NIVisa\Examples). In this Examples directory are examples for C, VB4, and VB5. One of the "General" examples is a VISA Find Resources Example. You could easily modify this example to detect manufacturer and model of the found devices.
    Regards,
    Greg Caesar
    Applications Engineer
    National Instruments

  • Slot Detection of PXI Modules, More details

    I read the knowledge base titled: Slot Detection of PXI Modules but have a few questions about it. How often to I have to do this? When I insert or remove a board from the PXI chassis? When I insert or remove an additional chassis in daisy chain? With Multiple chassis in Daisy chain. How do I know which device number is which card? ie if I have 2 of the same model of cards both in slot 5 but in different chassis. If I remove a card, am I guarranted that other cards device numbers will not change?

    John,
    The Knowledge Base (KB) "Slot Detection of PXI Modules" says that the PXI Initialization File (PXISYS.INI) file must be saved in the systems directory in order for the system to be able to identify the slot where a board is located. This is because every slot in a PCI Bus (a PXI system uses a PCI bus) has a PCI Device Number and PCI Bus Number associated with it. The PXISYS.INI file describes the architecture of the chassis and the controller, and has the appropiate PCI Device Number and PCI Bus Number for every slot. There is a unique PXISYS.INI file for every combination of PXI chassis and PXI controller.
    How often to I have to do this? When I insert or remove a board from the PXI chassis?
    Currently you do not need to edit the PXISYS.INI file. You can download the PXISYS.INI file from our website and use it as it is (see link in the KB you were reading). So you only need to save once the appropiate PXISYS.INI file to the Windows Systems directory, regardless of whether you change the PXI board in your system.
    When I insert or remove an additional chassis in daisy chain? With Multiple chassis in Daisy chain?
    If you are daysi-chaining chassis, keep in mind that the current PXI Standard DOES NOT support daysi-chaining. However, in previous PXI configurations, I have successfully edited a PXISYS.INI file so I can do Slot Identification in daysi-chained chassis (not in star configuration, though). The steps I followed are in the text file attach to this e-mail.
    How do I know which device number is which card? ie if I have 2 of the same model of cards both in slot 5 but in different chassis. If I remove a card, am I guarranted that other cards device numbers will not change?
    Finally, if you are using NI DAQ boards, NI-DAQ driver will assign a Device Number to the boards that correspond to the Slot Number, and the Slot Number is described in the PXISYS.INI file that you edited following the instructions in the text file attached below.
    If your boards do not use the NI-DAQ driver, but support NI-VISA, you can use the PXI VISA Instrument Descriptor to find out the Slot they are installed in. See the KB "Programmatic Slot ID" linked below for more information. It has an Example Program linked to it too:
    KnowledgeBase 2MDFG2WD - Programmatic PXI Slot Detection
    Let me know if I can be of further assistance,
    Claudia Lorente
    Applications Engineer
    National Instruments
    http://www.ni.com/
    Attachments:
    PXISYS_for_Daysi_Chain.txt ‏4 KB

  • How do you grey out/disable fields under a radio button if another radio button is selected in Adobe Acrobat XI Pro?

    How do you grey out/disable fields under a radio button if another radio button is selected in Adobe Acrobat XI Pro?
    I’m creating a form where the user has three options to make a payment.
    1. charge to my credit card
    2. charge associated costs to bank account
    3. By cheque or money order
    My Problem is, under each option, there are required fields that has to be filled out. So if the user picks the first option, charge to my credit card, they would fill out the required fields (credit card number, expiration date etc.). But when they click submit button to submit the form, it won’t let them, because there are required fields under the second option. Also, I have the radio buttons for the three options setup so that if the user holds the shift key and clicks a radio button, it unchecks it. So what I'm trying to do is this: If the user selects the radio button for option 1, the other two options are greyed out/disabled. And if the user holds down the shift key and clicks radio button for option one again, it unchecks the radio button and the other two options are available again. Is there a way to grey out or disable the two other payment options when the other one is picked. I’m assuming I will have to use javascript, but what would the coding be and which field do I write it under?
    Thanks in advance guys

    You will have to use custom JavaScript to access the various properties of the field object.
    The radio button group has a value. When no button is selected that value is "Off". When an individual button has been selected the value for the group will be the option or export value for that individual button.
    Once you have determined the button selected, then you will know the form fields that need to be made required. You use JavaScript to access those fields and change the "read only" property to false, and set the "required" property to true. For the fields associated with the other options, those fields should be reset, made read only, and have the "required" property set to false.
    Disabling (graying-out) Form Fields
    >> Also, I have the radio buttons for the three options setup so that if the user holds the shift key and clicks a radio button, it unchecks it.
    Radio button in a PDF do not work that way. Only check boxes can be unchecked by clicking on one that has been checked.
    If you plan the coding for the Mouse UP action to test for all possible options and code for each of those options you should have what you want.
    If you want actual code you need to provide a lot more details.
    It is even possible to perform some credit card and bank routing number validations with JavaScript and some check digit formulas.

  • How can I use the print module to print different size images on one large "canvas"?

    How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
    I was thinking the print module would do this automatically for me.

    You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

  • HT4241 Does dvi to HDMI adapter works on mid 2007 iMac? Some how my iMac detect the sharp tv but the tv screen is black.

    Does dvi to HDMI adapter works on mid 2007 iMac? Some how my iMac detect the sharp tv but the tv screen is black.

    you need mini dvi to hdmi cable
    http://store.apple.com/us/product/M9321G/B/apple-mini-dvi-to-dvi-adapter?fnode=5 1
    and
    http://store.apple.com/us/product/HA835ZM/A/belkin-hdmi-to-dvi-d-cable-2-m66-ft? fnode=51

  • How to create a callback function module

    Hi all,
    I am working in a requirement where we need to call a function module at a 'after change' event. So how to create a callback function module and register it with the crmvevent ?_
    I created a sample function module and try to create entries in table crmv_event_cust, but i got an error message saying that the function module name I provided is not in table CRMC_FUNC_ASSIGN. When I try to create entry there, I got a message that function module is not in CRMC_OBJ_FUNC and that table is a standard table with no maintanance options !!
    looks like i am going in wrong way ... can any one please help ??

    Looking at my system all you need to do is create the entry for the callback function in maint view: CRMV_FUNC_ASSIGN.
    Your entry should be as simple as Z-function name Object Function - <same as others in the segment you are assigning>
    IE for the partner it would be CRM_PARTNER as object function, for general order processing CRM_ORDER
    Take care,
    Stephen

  • How to check for a function module with its description and functionality

    Hi all,
    How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

    Hi,
    You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
    Say for example you need to search something regarding converstion.
    Search for * CONVERT * and press F4.
    If there is something specfic like converting date to something you can give
    DATE * CONVERT *
    OR
    CONVERT * DATE *  and press F4.
    Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
    Regards,
    Pramod

  • How to go into a function module through SE80 t - code

    Hi All , 
                 How to go into a function module through SE80 t - code.
    Thanks in advance.

    >
    Balaji Krishnamoorthy wrote:
    > Hi All , 
    >              How to go into a function module through SE80 t - code.
    >
    > Thanks in advance.
    Hi,
    With  help of  function group
    Thanks & Regards
    Edited by: Always Learner on Oct 16, 2008 2:31 PM

  • How to config Check Digits function module for Student Number Validation

    Hi SLCM Experts,
    In the SAP-SLCM, How to use check digits function module for validate student number.  Just only config it or need to customizing program.
    *Any idea to student number validation in SLCM?*
    Best Regards,
    Suvatchai K.

    Hi ,
    Can you expalin it further ?
    You configure the St. no in piq_matr . And set it  as external or internal no. range which suits your business .
    What is the validation you are looking for ?
    Regards
    Gajalakshmi

Maybe you are looking for