How to find the existing function module is used in another function module
Hi all,
I created a function module and the same one is called from another function module.
When I tried to find where the first function module is used using Where-used List , I am getting the message "function module not found in selected areas" .
Please guide me what is other method to find whether the function module is used in another one.
Thanks,
Vengal Rao.
hi,
Go to UTILITIES-> Update Navigation index.
or go to fucntion group and Generate the Funtion group once.
it will detect all fucntion modules under that function group.
regards,
Rama
Similar Messages
-
How to find the existing Idoc...
Hi all
How to find the existing Idoc...
in tranction we02..?Please find the function module that is being used to generate the inbound/outbound IDoc.
Then you go to inside the FM and search for 'CUSTOMER-FUNCTION' in the main program.
This is the place that provided by SAP to modify the IDoc segments.
CALL CUSTOMER-FUNCTION '012'
EXPORTING
DEKKO = EKKO
DPEKKO = PEKKO
TABLES
DEKPO = XEKPO
DPEKPO = XPEKPO
DEKET = XEKET
DH_APPL = APPL.
Hope this will help.
Regards,
Ferry Lianto
<b>Please reward points if helpful.</b> -
How to find the existing START ROUTINEs in Transfer Rules in whole system ?
Hi all,
How to find the existing Start Routines in Transfer Rules in BW System, please ?
I know that we could find from the Transfer Rules.
Is there any way to find instead of looking at Transfer Rules for <b>each</b> InfoSource?
Thanks,
Venkat.Hi Venkat
You can find it in these tables
RSTRAN
RSUPDROUT
RSAROUT
RSAABAP
RSAABAPINV
Thanks
Tripple k -
How to find the existing workflows
Hi Gurus,
How to find the existing workflows, and assign a user to a role.
Suitably rewarded for helpful answers.
B S BHi,
You can find existing workflow in Transaction PFTC.
Select Task Type as Workflow Template(WS) and either do F4 on Task
or put some description and press enter.
For assigning a user to a role, check transaction PPOCW. (If in an Org. Unit) or through SU01.
Regards,
Ashish -
How to find the existing request no for Smart form
Hi Experts,
plz tell me how to find the existing request no for Smart form in ABAP.
thanks in advance.
regards,
radhika.Radhika,
Choose Goto > Object Directory Entry> Lock Overview On the Initial screen of the "smartforms" transaction, after entering the actual smartform. This would give you the request number for the smartform.
Regards
Narasimhan -
How to find the cost center group from cycle/ segment in CO module?
Hi All,
I need to fetch the list of cost centers in the cost center group against the cycle.
Is there any table which will store the list of cost centers against the cycle?
or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
Regards,
MrunalFM: RK_AL_CYCLE_READ
CHECK TABLE: T811K -
How to find the next empty member to use it in the FIX statement?
Hi,
I need to create a HBR that, when launched, finds the first member that has a #MISSING value and updates this value with 1. I've tried to create similar code to those from Workforce, however with no success.
The value of 1 should be entered for the first empty child of "Transactions" in combination with account "A-1061800", "No Custom3", "No Custom4", "FY10", "E-00000", "BegBalance", "Robocza", "Budget", and "C2-00000".
The code I've developed looks like this:
SET CREATENONMISSINGBLK ON;
+FIX("BegBalance",[KHSA_PLAN2_CUSTOM3],[KHSA_PLAN2_CUSTOM4],"E-00000","FY10","Budget","Robocza",[KHSA_PLAN2_CURRENCY],HSP_InputValue)+
+"A-1061800"(+
IF(@MAXS(SKIPMISSING,@CHILDREN("Transactions")) == #MISSING)
+"C2-00000" = 1;+
ENDIF)
ENDFIX
The HBR however updates all children of "Transactions" with value of 1 - for two days I've been searching for a way to fix on a first empty child of "Transactions".
Maybe someone could help me, please?
Regards
Marcin StawnyThere isn't a built-in function to perform calculations on thable cells. What you can do is to retrieve thable cells values and calculate the average by yourself.
To retrieve a bunch of cells in a single instruction you can use GetTableCellRangeVals: prerequisite for this function to work correctly is that cells are all included in a Rect structure (shortly, a rectangle) and are all of the same data type. See the help for the function for some explanations and the link to an example of its usage. In Cell range parameter you can pass VAL_TABLE_ROW_RANGE (row) macro to retrieve an entire row. See here for details.
Once you have retrieved cell values in an array, you can pass it to Mean function to calculate the average.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos? -
How to Find the Location in Google Maps using Latitude and Longitude
Hai,
I need to find the Location from Google Maps, which is match with the Latitude and Longitude values we are sending.
This will be done by using pure java class i need, can anyone having the sample code for this.
It's Urgent, please help me
Expecting replies...Yes we were having the performance issues when it is getting locked? in this what i want to know
why it happens suddenly?
or what package this piece of code is calling?
or is there any possiblity of system will degrade the performance like sys user etc...?
where exactly i found the root cause for further analysis?
so that next time onwards if particular objects is locking we come to know why it happens is there any logical false or how do we eliminate this issue last time?
coz in our environment sometimes most of lockings are from the same table?
pls let me know where i have to concentrate for debug and how to troubloshoot and reslove this
sorry for the inconvience.. i m expecting the answer from here. if anybody wants some more info i ll let him know.
as of till now i got some docs i start to read this.
Regards
M.Murali..
Note: will system/sys degrade the performance ?if so how ? -
How to find the value of date char used as exception aggregation reference
Hi BI Gurus,
On a BEx report I need to list three things by material:
1) the open (not yet delivered) Purchase Order quantities
2) the PO quantity to be delivered next and
3) the date that belongs to the next delivery
The model supports these data i.e. for each material I can list all open quantities by Purchase Order / Item / Schedule line and the scheduled delivery dates are also available as a characteristic.
Determining 1) is easy as the drilldown is fixed (materials only) the open quantities get summarized for all PO-s belonging to the materials.
To determine 2) I used a Calculated KF simply including KF 1) =Open PO Qty in the definition and setting Exception Aggregation (first value) with a reference char of the delivery date. This gives back the Open PO Quantity to be delivered first.
My question is about how to determine the 3rd value (actually this is not a KPI but a characteristic value). In other words, for each materials I would need to determine the first among all of the possible delivery date char values of the open PO Items / schedule lines. This is the date the quantity shown in the 2nd KPI will be delivered on.
Does anybody have an idea how to approach this issue?
Thanks for you help in advance,
AttilaHi Olivier,
Thanks for your suggestion. I got a bit closer with the replacement path formula variable and the CKF. I tried to apply the same logic of KPI 2) but for some reason it did not work. Actually, it delivers the right value but only when 0SCL_DELDAT (Scheduled delivery date) is in the drilldown But what I need is the first delivery date by Material only, and without this 0SCL_DELDAT drilldown.
Any other ideas?
Thanks and bye,
Attila -
How to find the existing hierarchy variable?
Dear SAP gurus,
In this existing query, there is a Cost Element hierarchy variable created. When I run the query (second attempt by refreshing the query selection screen), the Cost Element Node variable field was not available to be changed again. Believe this has to do with the option 'Changeable with query navigation' option in the variable created. I was trying to confirm on this via the variable properties, but I had trouble identifying where it is located, because there are just too many cost element hierarchies available for reporting.
Anyone can help me? Thank you in advance.
Regards,
AdelynnHI Nagesh,
Thanks for your highlight, I found the variable, however, I didnt see any option "Changeable with query navigation" for this hierarchy variable. Any reason for this?
The issue I am facing was, say, when I run the query for the first time with Cost Element Node 1, and i was trying to change my selection to CE node 2, so I refreshed my variable screen but the field to select CE hierarchy Node was no longer there. Normally this happens to variable that has the option "Changeable with query navigation" unchecked.
But in this case, I did not see this option for the hierarchy variable used, how do we justify the scenario in this case?
Please kindly assist, thanks again.
Regards,
Adelynn -
How to find the existing sql server backup plan/schedule is there a script for that?
Friends,
Is there a easy way to find out in SQLServer (for All DB's) what is the current backup plan/schedule ? is there a script for that?
Thanks,
Karthikeyan JothiTo check the database backup
Select
SERVERPROPERTY('ServerName'),
db.name,
CONVERT(VARCHAR(10), b.backup_start_date, 103) + + convert(VARCHAR(8), b.backup_start_date, 14) backup_start_date,
CONVERT(VARCHAR(10), b.backup_finish_date, 103) + + convert(VARCHAR(8), b.backup_finish_date, 14) backup_finish_date,
case
when (DATEDIFF(hour, b.backup_start_date, getdate())<24)then 'Success'
when (DATEDIFF(hour, b.backup_start_date, getdate())>=24)then 'Failed'
end Status,
DATEDIFF(hh, b.backup_finish_date, GETDATE())BackupAgeInHours,
(b.backup_size/1024/1024/1024 )BackupSize,
case b.[type]
WHEN 'D' THEN 'Full'
WHEN 'I' THEN 'Differential'
WHEN 'L' THEN 'Transaction Log'
END Type,
ISNULL(STR(ABS(DATEDIFF(day, GetDate(),(Backup_finish_date)))), 'NEVER')DaysSinceLastBackup
FROM sys.sysdatabases db
Left OUTER JOIN (SELECT * , ROW_NUMBER() OVER(PARTITION BY database_name ORDER BY backup_finish_date DESC) AS RNUM
FROM msdb.dbo.backupset) b ON b.database_name = db.name AND RNUM = 1
where dbid<>2
OR
SELECT
DISTINCT
a.Name AS DatabaseName ,
CONVERT(SYSNAME, DATABASEPROPERTYEX(a.name, 'Recovery')) RecoveryModel ,
COALESCE(( SELECT CONVERT(VARCHAR(12), MAX(backup_finish_date), 101)
FROM msdb.dbo.backupset
WHERE database_name = a.name
AND type = 'd'
AND is_copy_only = '0'
), 'No Full') AS 'Full' ,
COALESCE(( SELECT CONVERT(VARCHAR(12), MAX(backup_finish_date), 101)
FROM msdb.dbo.backupset
WHERE database_name = a.name
AND type = 'i'
AND is_copy_only = '0'
), 'No Diff') AS 'Diff' ,
COALESCE(( SELECT CONVERT(VARCHAR(20), MAX(backup_finish_date), 120)
FROM msdb.dbo.backupset
WHERE database_name = a.name
AND type = 'l'
), 'No Log') AS 'LastLog' ,
COALESCE(( SELECT CONVERT(VARCHAR(20), backup_finish_date, 120)
FROM ( SELECT ROW_NUMBER() OVER ( ORDER BY backup_finish_date DESC ) AS 'rownum' ,
backup_finish_date
FROM msdb.dbo.backupset
WHERE database_name = a.name
AND type = 'l'
) withrownum
WHERE rownum = 2
), 'No Log') AS 'LastLog2'
FROM sys.databases a
LEFT OUTER JOIN msdb.dbo.backupset b ON b.database_name = a.name
WHERE a.name <> 'tempdb'
AND a.state_desc = 'online'
GROUP BY a.Name ,
a.compatibility_level
ORDER BY a.name
To check the schedule you can try the below script
https://gallery.technet.microsoft.com/SQL-Jobs-Complete-eabe0050
--Prashanth -
How to find the no of tmp table used in the db object
Hi all,
I have a big sp of 5K lines, which uses some 15 odd tmp tables in it. I would like to find how many and which are the tmp used by this stored procedure; with out looking line by line of code.
Is it possible.
RegardsNeilCSE wrote:
Hi all,
I have a big sp of 5K lines, which uses some 15 odd tmp tables in it. I would like to find how many and which are the tmp used by this stored procedure; with out looking line by line of code.
Is it possible.
RegardsDefinitlly, if the code , is well written, they might have used some terminolgies while creating temporary tables (for ex TMP_tablename) Search for those tables in all_source view,
SELECT TEXT from all_source where upper(text) like '%TMP_%'Hope this helps.
Regards,
Achyut -
How to find the check box selected while using Class in ALV grid display
hi,
I am displaying the ALV report using Class
For Example: CALL METHOD MYGRID->SET_TABLE_FOR_FIRST_DISPLAY EXPORTING I_STRUCTURE_NAME = 'ACC1'
IS_VARIANT = GS_VARIANT
I_SAVE = 'A' "XSAVE
IS_LAYOUT = LOUT
CHANGING IT_FIELDCATALOG = IT_FIELD
IT_OUTTAB = ACC_NO[].
In output i am getting 10 customer with check box, how do i find that customer number is selected.HI,
Once user selects a check box, he would CLICK on a button ( say PROCESS )inorder to do the processing for the selected records. So in the PAI, under the EVENT ( OK CODE ) of the Button ( say PROCESS ), write the following code.
CALL METHOD MYGRID->check_changed_data.
Now,
Loop at acc_no where check = `X`.
Do the processing.
endloop.
Best regards,
Prashant -
How to find the type of gui being used?
We have a custom t code and the pop ups are not working in webgui.
We want to restict the t code from getting triggered in the webgui.
So it should only be used in wingui.
The checkbox in SE93 did not help.
So how to restrict this.?Hi,
GotoSE93>(TCODE)
Check for Gui Support
Only check SAP GUI FOR WINDOWS.
Check if Easy Web transaction is selected.
Radio Button:Professional User Transaction should be selected.
This will resolve the issue.
regards,
Gurpreet -
How to find suitable( existing) function group for a Function Module ?
How to find suitable( existing) function group for a Function Module to be created?
This is FM for converting amounts to text.Hi,
If you are not sure into which Function group your FM should go in then its advised to create a Function group of your own. Its not advised to create a function module in any other function group unless its owned by you since your FM can get deleted by others or it can get changed.
Create your own Function group. But if you want to create in an existing FG then best way is to find out the Function Group by searching for suitable existing Function module then see their function group
Regards,
Sesh
Maybe you are looking for
-
How can I reprint pictures that were sent to my eprint email address?
how can i reprint pictures that were sent to my e-print email address?
-
Constant outages in different places in key west
Not only I have seen them but neighbors and buissnesses as well in my area would lose phone, internet and tv services, some reporting how it often goes off at night at random times. I know they've been working on upgrades and stuff but this has been
-
Anyone know if the jads/alx is available? BES Lead for BT, 11 BES 502 VMs, 2 Domains, 14k users
-
Architectural Choice for accessing Coherence Cache Server
I am a newbie and have a coherence use-case question. When accessing an independent coherence cache server from application code such as an EJB deployed in WLS, architecturally does one write up an entity which is then used as a sole point of access
-
TS5458 How can I uninstall OS X Yosemite?
I need to find out how to uninstall OS X Yosemite. Please make it in simple english. Fairly new at this. When I upgraded I thought it was for what I already had not this new software.