How do I do data compression when message is sent over RMI-IIOP

Hi,
Is there a way one can do data compression/de-compression when message is sent over RMI-IIOP ?
Regards,
Sourav

To elaborate on Tammy's idea, you could use for instance C:\Users\Public at the place where you initially put your Excel file to make sure this is found on the target computer. I would consider this a workaround though.
Or for Lumira documents that you already designed, change the location of the Excel file and use Data/Edit from your computer, then save the Lumira documents before sending them to the target audience.
From my humble opinion, the product should allow to use Data/Edit and change the source file even if the initial file path is no longer found. This should be possible for your target audience.
Antoine

Similar Messages

How to alert with new window when message is comming like MSN

Please tell me .How to alert with new window when message is comming like MSN?

Why is it the first think everyone wants to do in JSP is write a chat application?
Not really an easy way to do this, as HTTP is a "pull" model. You send a request, the server sends a response. The server can't send anything unless you ask for it. That kindof puts a damper on things like instant messaging.
A couple of workarounds
1 - refresh the page every once in a while to check for new messages. An easy solution but nowhere near optimal.
2 - check out pushlets www.pushlets.com
Cheers,
evnafets

How to send binary data in the message body

How can we send binary data in the message body that is base64 encoded? below are the requirements
Mime Header.
Mime-version: 1.0
Content-Type: application/octet_stream; name=test
Content-Transfer-Encoding: Base64
Submission must be named "test.sub" (lowercase)
Submission must be base64 mime-encoded
Submission must be sent in the body of the message (not as an attachment)
Only one submission per mail message
No other comments should be put in the body of the mail message (other than the submission)
I highly appreciate your help. If you can provide few examples, that will be very helpfull.
Thanks,
Madan

Use Message.setContent to set the content, or use Message.setDataHandler with
a DataHandler constructed with a ByteArrayDataSource. If the content is not
"naturally" encoded in base64, you can enforce it by setting the Content-Transfer-Encoding
header to "base64". Any reasonable mail reader won't care what encoding you use, as
long as the decoded data is correct.

How to transfer all Data like Contacts, Messages

Can anyhow advice How can I transfer all Data like Contacts, Messages, Photo, Notes and Data to a New Iphone 4S from an Old Iphone 4. Take note the Old Iphine 4 do not has a SIM card as it been use in the New Iphone 4S.
Appreciate your quick advices

iPhone: Transferring information from your current iPhone to a new iPhone

HT3529 How do I time / date stamp my messages

How do I time / date stamp my messages

They are already time/date stamped. Put your finger on a message and slide to the left. Time/date stamps will appear on the right edge of the screen.

How can you manage data usage when cellular data is off, but you are using WiFi where your WiFi provider charges for data use?

I spend quite a few months each year in Canada where I use a Telus Cellular Hub device which is also my WiFi Router. My iPhone 5 has Cellular Data set to "Off" which insures I won't be charged via my Verizon Wireless Service Provider for charges while in Canada. Trouble is Telus, Rogers and all the Canadian Internet Providers charge for all Data going through their Systems. Again, My Cellular Data on the iPhone 5 is turned off, but I use WiFi for such things as checking the Weather, or FaceBook, or searching the Web.
I believe that things may be happening in the background from various Apps that use quite a lot of Data. It could be that iCloud is part of the issue with things being backed up automatically. It also could be that Apps like AP or other News Apps are sending large amounts of Data in the photos associated with their New Stories, etc. I typically turn off the App Store "Updates" such that they don't automatically load. The FaceBook works now posted videos play when you are just scrolling through the News Feed.
I have been trying to fine an article somewhere which focuses on this specific problem but unfortunately many if not most articles are about folks worried about using Cellular Data while in a WiFi environment when their Cellular Data is turned on.
Does anyone know of a fairly comprehensive article about what settings on which Apps might reduce the Data Usage when Cellular Data is turned "Off" but you are going through a Service Provider who charges for all Data Accessed even when you are using WiFi?

Thanks for your comments, it is clear you understand my plight. The trouble is fully understanding what Apps and App Features are transferring data in the background any time you happen to turn WiFi to on (even if you have had it off most of the day or night). Obviously things like Location Services can constantly be sending and receiving data from my iPhone without any action on my part. Also if you have things like photo backup on the iCloud then each time you take a photo you are sending a copy out. All App Updates if set to Automatic also can add up to quite a bit of Data. Reading the News on AP or scrolling through FB News Feed is actually adding up to a lot of Data. There could be other culprits that I am not even thinking of. I don't want to turn Apps like Find My Phone off or turn iCloud off due to loosing the value of such a program entirely. Again thanks for your quick response.

How to get pricing date automatically when billing

Does anybody know where can I set, to get pricing date automatically when billing? (BTY must by the Sales order type)?
Thanks you guy.

Hi check in t-code VOV8 and enter sales order document type you can see pricing date setting as well as you can change manually pricing date while billing creation of billing VF01.
Hope this will help you.
Best Regards
Sainath

How do I make sounds when messages are Sent?

I used to hear a "whoosh" when mail actually sent. It disappeared. How do I make it happen again? Thank you

I checked and it is checked to play sounds for mail actions. So I unchecked it, then rechecked it. Still no go. Funny thing is it works just fine on the iPad
Any other ideas?
Tax for the help

How do I delete a large text message I sent that glitches the message app?

I just recently sent a REALLY large text message to my friend, but I don't think she actually got it. Since I sent this really big text I can't open the app for messages. Well, I can but it is frozen in the convo I sent the text in and after about 3 seconds the app closes back to the home screen. In the few seconds that I can keep the app open I tried to press the back button (on the upper left hand corner), to delete the convo so that is gets rid of the message. But, like I said before, it is frozen so it won't go anywhere. Also, while the app is open for a few seconds I tried holding the large text to delete it, but again the app is frozen so will do absolutely nothing. I really don't know how to to delete the convo or message to get the app working again. Please tell me if there is any other way to get the app working again. I have thought of resetting me phone, but that would be my last resort. I have a ton of valuable information I have to keep. Thank you!

Reset the Device using this method: Hold the home button + the lock button for about 10-12 seconds until the Apple logo appears. You will not lose any data or current settings.

How to set email so it shows messages i sent?

In my mac email inbox I can see the responses from my recipients but not the messages i just sent to them. I can only read my response once they have responded in the email thread. How can I get it so it lists my sent email too?

Welcome to Apple Support Communities.
These screen shots are from Mail.app version 4.6 (1085) on OS X 10.6.8.
Click an image to enlarge it to full size.
There should be a 'Sent' tab in the far left column of your Mail app under the heading 'MAILBOXES'
Move the cursor to the 'Sent' line (the one with the paper airplane icon)
Click on the 'play' triangle so it faces downward to reveal any and all email accounts you have set up in Mail.
(I have intentionally obscured some mailbox and message details in this image.)
Click on any one of the mail accounts listed under 'Sent' to see emails you've sent, as shown for the iCloud account below. (I have intentionally obscured some mailbox and message details in this image.)

How can I update my Iphone when the update is over 20mb, can this be done in Itune ?

How can I update an app if the update is over 20 mb. Can this update be done in Itune ?
An update on Iphone is not possible when it is over 20 mb. and I can't find an update tool in Itune.
Thanks

Yes for itunes, or you can update when you on wifi.
On the left side bar where you see apps click on it then on the bottom you will see check for updates.

How can I see exactly what time messages are sent or received from IPhone 4

Is there any way to view exact times that messages are sent and received from an iPhone 4 running iOS 7?

If you are using iOS 7, then slide the text bubble to the left and you can see the time stamp to the right of the bubble.

How to avoid 'duplicate data record' error message when loading master data

Dear Experts
We have a custom extractor on table CSKS called ZCOSTCENTER_ATTR. The settings of this datasource are the same as the settings of 0COSTCENTER_ATTR. The problem is that when loading to BW it seems that validity (DATEFROM and DATETO) is not taken into account. If there is a cost center with several entries having different validity, I get this duplicate data record error. There is no error when loading 0COSTCENTER_ATTR.
Enhancing 0COSTCENTER_ATTR to have one datasource instead of two is not an option.
I know that you can set ignore duplicates in the infopackage, but that is not a nice solution. 0COSTCENTER_ATTR can run without this!
Is there a trick you know to tell the system that the date fields are also part of the key??
Thank you for your help
Peter

Alessandro - ZCOSTCENTER_ATTR is loading 0COSTCENTER, just like 0COSTCENTER_ATTR.
Siggi - I don't have the error message described in the note.
"There are duplicates of the data record 2 & with the key 'NO010000122077 &' for characteristic 0COSTCENTER &."
In PSA the records are marked red with the same message (MSG no 191).
As you see the key does not contain the date when the record is valid. How do I add it? How is it working for 0COSTCENTER_ATTR with the same records? Is it done on the R/3 or on the BW side?
Thanks
Peter

How did I get better compression when using GPU acceleration?

Hello,
I was just making a short, 1:12-long video encoded as H.264 in an MP4 wrapper. I had edited the video in Premiere Pro CC, and was exporting through Adobe Media Encoder at a framerate of 29.97 FPS and a resolution of 1920x1080. I wanted to do a test to see how much GPU acceleration benefits me. So, I ran two different tests, one with and one without. The one with GPU acceleration finished in 2:09. The one without it took 2:40, definately enough to justify using GPU acceleration (my GPU is an NVidia GTX 660 Ti which I have overclocked). I am sure my benefits would be even greater in most videos I make, since this one had relatively few effects.
However, I checked the file sizes out of curiosity, and found that the one made with GPU acceleration was 175 MB in size, and the other was 176 MB. While the difference is pretty small, I am wondering why it exists at all. I checked the bitrates, and the one made with GPU acceleration is 19,824 KB/s, whereas the other is 19,966 KB/s. I used the exact same presets for both. I even re-encoded the videos again just to test it and verify the results, and the second test confirms what the first showed.
So, what I am wondering is: What is it that made this possible, and could this be used to my advantage in future productions?
In case it is in any way relevant, these are my computer's specifications:
-Hardware-
Case- MSI Interceptor Series Barricade
Mainboard- MSI Z77A-G45
Power Supply Unit- Corsair HX-750
Processor- Third-Generation Quad-Core Intel Core i7-3770K
Graphics Card- ASUS NVidia GeForce GTX 660 Ti Overclocked Edition (with two-gigabytes of dedicated GDDR5 video memory and the core overclocked to 1115 MHz)
Random Access Memory- Eight gigabytes of dual-channel 1600-MHz DDR3 Corsair Dominator Platinum Memory
Audio Card- ASUS Xonar DSX
System Data Drive- 128-gigabyte Samsung 840 Pro Solid-State Drive
Storage Data Drive- One-terabyte, 7200 RPM Western Digital Caviar Black Hard Disk Drive
Cooling System- Two front-mounted 120mm case fans (intake), one top-mounted 120mm case fan (exhaust), and a Corsair Hydro H60 High-Performance Liquid CPU Cooler (Corsair SP120 rear exhaust fan)
-Peripherals-
Mouse- Cyborg R.A.T. 7
Keyboard- Logitech G110
Headset- Razer Tiamat Elite 7.1
Joystick- Saitek Cyborg Evo
-Software-
Operating System- Windows 8.1 64-bit
DirectX Variant- DirectX 11.1
Graphics Software- ASUS GPU Tweak
CPU Temperature/Usage Monitoring Software- Core Temp
Maintainance Software- Piriform CCleaner and IObit Smart Defragmenter
Compression Software- JZip
Encryption Software- AxCrypt
Game Clients- Steam, Origin, Games for Windows LIVE, and Gamestop
Recording Software- Fraps and Hypercam 2
Video Editing Software- Adobe Premiere Pro CC
Video Compositing/Visual Effects Software- Adobe After Effects CC
Video Encoding Software- Adobe Media Encoder
Audio Editing/Mixing Software- Adobe Audition CC
Image Editing/Compositing Software- Adobe Photoshop CC
Graphic Production/Drawing Software- Adobe Illustrator CC

As I said in my original post, I did test it again. I have also ran other tests, with other sequences, and they all confirm that the final file is smaller when GPU acceleration is used.
Yes, the difference is small but I'm wondering how there can even be a variable at all. If you put a video in and have it spit it out, then do that again, the videos should be the same size. It's a computer program, so the outputs are all based on variables. If the variables don't change, the output shouldn't either. For this reason, I cannot believe you when you say "I can, for example, run exactly the same export on the same sequence more than once, are rarely are they identical in export times or file size."

How to access new data in User Message Event Callback?

I am using the Simple LabVIEW OI as the model for my TestStand user interface.
The sequence sends a User Message to the OI to request the string array of tests to run.
But I am having great difficulty making this string array data available to the event callback VI.
I do not want to use a global variable and so my unsuccessful method so far has been as follows:
1. Use a Refnum to the Array and pass it into the Config Event Callbacks VI via the cluster
2. The "Selected Tests" in the input cluster in the Config Event Callbacks VI is a generic Control Refnum
3. This Selected Tests (at the bottom) is then bundled and passed into the User Parameter
4. But how do I convert the Selected Tests Control refnum back into the original string array in the actual callback?
Also if there is anyone that can suggest a better way of doing this then please let me know.
The bottom line is - how to get the latest data into the event callback function when it is called?
Many thanks,
Ronnie
TestStand 4.2.1, LabVIEW 2009, LabWindows/CVI 2009
Solved!
Go to Solution.

Hi Ray,
The 'Selected Tests' array refnum is #4 in the cluster order and matches all the way through - so I think that's OK.
In the final diagram above, I can get the Selected Tests cluster from the 'User Parameter', but it is still in the form of a refnum.
My problem is a lack of understanding in how to convert this 'Selected Tests' refnum back to the original data type (a string array).
Basically I want to get the string array from the 'Selected Tests' refnum.
As you can see from above I tried to use a property node. I've also tried to 'cast' the refnum to a 'more specific class' by choosing 'Array' but it's still ends up as a refnum.
I hope you see what I mean?
Thanks,
Ronnie
TestStand 4.2.1, LabVIEW 2009, LabWindows/CVI 2009

How do I do data compression when message is sent over RMI-IIOP

Similar Messages

Maybe you are looking for