How do I do wireless backup without wireless network?

My school dormitory doesn't allow LAN, hence I can't extend my network through Time capsule (TC), which acts as an airbase.
Nevertheless, I can sign-on wirelessly to school network, so I don't really need to get online through TC.
However, I do wish to wirelessly access TC content, and be backup via TC.
I read from couple blogs that mentioned how, through internet cable, I can set up TC
and choose manual set up - extend network, and do a auto sign-in with school network.
But with my school, it doesn't really allow that.
Therefore, I'm here inquiring, is it possible for my computer to automatically detect my TC and be back up
even when TC doesn't have internet network.
Thank you.
Tai.
Cell: 626-264-0048

TCLMAC wrote:
thanks, the problem indeed is,
there is no ethernet jack available. that's what i meant by, "doesn't allow lan"
There is an ethernet jack in the TC.. 3 of them for LAN and one for WAN to be precise. Assuming you have a MBP i hope it is one that still has a jack.. therefore there is a jack on both.. all you need is an ethernet cable between them. Get internet by wireless.. and TC connection by ethernet. Do both at the same time by using a different IP range and fixed static ip on the Mac. You will cause no interference or issues to other residents. Just turn off the wireless in the TC. 
ah, the problem sounds so desperate.
Why can't my macbook just talk to my TC directly, and wirelessly...?
Of course you can connect to the TC directly (that usually means by ethernet btw).. and wirelessly,, yes of course. just not at the same time as the internet.. because your internet service is designed by geniuses for idiots.. who would connect up dhcp servers and bring down the whole network.. who would setup wireless routers in every room of the college when there are precisely 3 available non-overlapping channels for wireless.. at 2.4ghz.. yes, only 3.. so figure out how well that goes with all the residents packed together in little rooms.
Apart from interferring with the network your college provides.. will cause so much interference with each other.. they designed a login web page system that requires a computer to login.
You can do it.. even simultaneously to the internet system.. use a usb wireless stick.. but use 5ghz.. and you will probably need a different AP to prevent the TC revealing your presence. Since running it is not allowed. And any decent admins will have you tracked in no time. 
If you can live with the consequencies.. and no need to treat fellow residents as important at all as long as you get connected to your TC.. go ahead. Having done IT admin.. that is why we give up.

Similar Messages

  • How can i restore old backup without deleting my existing data

    how can i restore old backup without deleting my existing data. unfortunately i have deleted few of my old photos and restored them from my old backup. i got the deleted photos but lost my recent data and photos. how can i get those too.

    You cannot. However, if your back up is through iTunes on your computer and you do an internet search for something like "iPhone BackUpExtractor", I believe there is software that will help you access the SQL database that is your back up. You may be able to pull out what you need.
    Once you restore from a back up, any data that was on the phone is gone.

  • How i can make a backup without separate hdd?

    How i can make a backup without seperate hdd?

    how i can partition the hd? please step by step...
    today it's my first apple-day ... i was 18 years windows user
    While I agree with everyone else, get a second disk and backup to that disk, I will point you in the directory of partitioning.
    Applications -> Utilities -> Disk Utility
    Disk Utility may or may not be able to carve a new partition out of your existing partition, depending on whether the end of the current partition is unused so the current partition can be reduced in size and a new partition added.
    It may be necessary to use an external disk, clone your internal disk using SuperDuper or Carbon Copy Cloner (both free to use when creating a full clone), then partition your internal disk, and finally restore the external clone to the internal disk again using SuperDuper or Carbon Copy Cloner.
    If you do not want to get a 2nd disk, then consider using an on-line service such as CrashPlan, Carbonite, Mozy, etc... for the files you absolutely cannot aford to loose.

  • HT3728 How do I reset wireless network password?

    How do I reset wireless network password?  Current password not being accepted; keep receiving connection timeout message.

    http://support.apple.com/kb/ht3728

  • How can I share the internet without any network distribution?

    I am facing a problem of internet sharing.
    I would like to share my connection from ethernet to airport,
    however, when I chose the "internet sharing" box, safari failed to connect to the internet.
    After removing the tick of the box, web browsing became normal again.
    how can I share the internet without any network distribution?
    thanks!

    You'd have to select in Sharing Preferences > Internet Sharing > Share your connection from ETHERNET, and to computers using AIRPORT.

  • How do I restrict wireless network access to specific devices/computers, using an Airport Extreme, when the WPA2 password is able to be found by other devices?

    I have set up a wireless network in my office using a couple of Airport Extremes, and, for some reason, our Windows computers are able to view the password of the network. Well, given that we employ teenagers, you can imagine what happens when they all find out the password. We want to restrict network access to only those devices we deem necessary. How do I accomplish this?

    SidMed wrote:
    We need 18-20 devices to access, all wirelessly.
    You can keep using your Apple routers as AP devices.. but get a router running a secure OS as the actual router that controls the network..
    If you have 18-20 teens on the network.. then setting quota and restrictions on bandwidth is far more important than time..
    Gargoyle on a cheap router can do it.. eg WNDR3800 or the newer W1024ND v2.
    Simply turn off the wireless in these devices.. and use the ethernet connection to the airport as WAP.
    Honestly you just will never get the security or control using apple domestic routers.

  • How to restore time machine backup without disturbing already installed app

    Hi!
    My school recently reconfigured/reformatted my macbook and install the school image. Now it is filled with applications that the school help us installed. Now how do i restore the backup that my time machine backups last time? Migration assistant or what? I did not change my mac, it is just that my hard disk got reconfigured. How do i restore backup without disturbing the apps my school installs?
    Please help thanks!
    ALa.

    alazahee wrote:
    I did not change my mac, it is just that my hard disk got reconfigured.
    I'm not sure what you mean by that. Is your user account still there?
    If not, and if you have either Time Machine backups or a "clone" as backups, yes, use Migration Assistant. See [Using Migration Assistant|http://web.me.com/pondini/AppleTips/Migrate.html]. Note that you must be logged-on with a user account that's named differently from any of the accounts you want to transfer, or else be prepared to rename the duplicate.
    If your backups aren't either Time Machine backups or a "clone," you'll have to drag and drop or restore using the app that made them.

  • HT3231 How long migrate via wireless network?

    How long does it normally take to migrate all data from one Mac to another via a wireless network?

    It may, depending on the configuration of your Network Preferences.
    If you're about to give up on wireless anyway, try plugging in the cable and then turn off AirPort by clicking one of the computer's WiFi menus and selecting "Turn Wi-Fi Off". Migration Assistant will probably pause for a moment or two, after which it will either continue at a faster rate or simply give up. In the latter case you will have to start it again.
    When you do leave Wi-Fi "off" to ensure it uses the wired connection.

  • How do I refresh wireless network list?

    I own a MacBook Pro and I noticed recently that when I switch on my access point AFTER booting OSX my home WEP wireless network won't show up in the network list and thus the airport does not connect. I have to switch airport off and then back on to find the network, and then all works fine.
    Is there any way to tell airport to "refresh" the network list, or is any option defining how often to check for networks in range?
    Maurizio
    Macbook Pro   Mac OS X (10.4.9)  

    Thanks, I believe I found the solution following your suggestion.
    Actually I did not want to choose the option you mentioned since I wanted Airport to try to connect to open network if it doesen't find a preferred one.
    However I found out that my airport option "By default join:" was set to Automatic. I believed it mean Airport tries to connect to the last network used, and thus had to connect to my home network as I wanted but, as I explainde above, it did not refresh the network list. Can't figure out why.
    Instead changing that to "Preferred networks" and using the option "Ask before joining an open network" did the trick. Now Airport finds any network in the preferred list almost instantly, and otherwise asks if I want to use an open one.

  • How to Join a wireless network in 7.6.4

    After I upgrade my Airport Express (Flat White) to 7.6.4 the option to "Join a Wireless Network" dissapear only show Create and Expand a Wireless Network How I can Join to an existent Wireless Network?
    Best Regards

    FWIW ... I just upgraded the firmware on my 2nd gen 802.11n AirPort Express base station from 7.6.2 to 7.6.4 and I still found the "Join a wireless network" option available in the AirPort Utility.
    I am using AirPort Utility v5.6 on OS X Mountain Lion. This option becomes available ONLY by holding down the Option key before making a Wireless Mode selection. This was true before the upgrade.

  • Macbookpro was stolen/recovered - how to track accessed wireless networks?

    Hi All,
    I have a MacBook Pro that was stolen and then recovered weeks later from someone who was not the original thief... Is there a way to find out the names of wireless networks accessed in hopes this would lead to the ID of the original thief? I've been looking at Console log under Diagnostic and Usage Messages, and here I can see exactly when the machine tries to autojoin wireless networks that have been remembered (and this is very useful), but wondering if I can find out the actual name of the network(s) joined in the hours after the laptop was stolen from me.
    Thanks for any info you can provide!
    For example - does this log below provide any revealing info?
    6/25/10 12:36:21 PM airportd[4287] [most time: (2.753261) _association] trace: <CFArray 0x100500240 [0x7fff704dff20]>{type = mutable-small, count = 5, values = (
    0 : <CFString 0x10003acb0 [0x7fff704dff20]>{contents = "prefnetwkAJ"}
    1 : <CFString 0x10003ab70 [0x7fff704dff20]>{contents = "scan non-DFS channels"}
    2 : <CFString 0x10051e210 [0x7fff704dff20]>{contents = "(1.637746) _scan"}
    3 : <CFString 0x10051b260 [0x7fff704dff20]>{contents = "(0.000018) _lookup"}
    4 : <CFString 0x100114380 [0x7fff704dff20]>{contents = "(2.753261) _association"}
    com.apple.message.domain: com.apple.airport.autojoin.summary
    com.apple.message.signature: AutoJoinSuccess
    com.apple.message.result: success
    com.apple.message.value: 4.446569
    com.apple.message.value2: 29.000000
    com.apple.message.value3: 1.000000
    com.apple.message.uuid: B370AB1E-5CB6-4A23-AD69-EAAB22D9A879
    Message was edited by: toastertu

    Try the following to see if this will provide some information:
    Open System Preferences (gear icon) on the dock
    Open Network
    Click on the AirPort connection on the left of the window
    Click Advanced at the lower right
    A list of previously joined networks will appear if the option to remember networks has been checked...unless this information has been deleted.

  • How to specify default wireless networks?

    I'm using a MacBook with a generic wireless 802.11g router in a location in which there are a lot of wireless networks. My wireless network is secured.
    Whenever I open the MacBook, it tries to connect to other open networks, but not mine. And once I manually connect it to mine, it sometimes disconnects after 5 minutes of idle time.
    Where in the Mac OS can I specify which network I want it to connect to (or not connect to), and have control over stuff like that?

    Open the Network control panel and select Airport and then configure. Right below the TCP/IP, PPPoe, AppleTalk tabs you'll see By Default Join...and it will probably say Automatic. Click on the popup menu and select Preferred Networks. Select your preferred networks and you are good to go.

  • HP Deskjet F380 - How to put on wireless network with Mac ? What print router is required?

    Hi I need some advice.
    I need to wirelessly network my Deskjet F380 printer (All in 0ne) I use MacBook and iBook. I need to know which wireless router would be suitable.
    Can anyone help.
    Thanks 
    Andy

    Sorry, that Wi-Fire didn't solve the problem. The issue, most likely, is Wi-Fi interference due to building construction material between the 7th & 9th floors. I would know of only two other options: 1) Run Ethernet between the floors, or 2) Employ Powerline adapters which take advantage of the building's AC circuit.
    For the second option, you would need a minimum of two adapter, one for near the router on the 9th floor and the second near your computer on the 7th. An Ethernet patch cord would then be connected between the 9th floor router and the first adapter, and a second patch cable connected between the second adapter & your computer.

  • HT2712 How do I delete wireless networks that my computer keeps detecting?

    My iMac keeps detecting other wireless networks in the neighborhood which slows down or prevents it from connecting to my wireless network. Is there a way to block those other networks?

    cortiz58 wrote:
    My iMac keeps detecting other wireless networks in the neighborhood
    Which is normal.
    ........which slows down or prevents it from connecting to my wireless network.
    I'm not sure that it does. What makes you say that? It might be that the others are on the same wireless channel as yours with a very strong signal and are interfering?

  • How to clone database from backup without access to original DB

    I want to create a new database from existing backup files and rolling forward some of the archivelogs (preferably with a new name and with different directory layout).
    How can I achieve the task on a separate test server (without access to the original database)? I found a lot of sources ( e.g. http://www.oracle-base.com/articles/11g/DuplicateDatabaseUsingRMAN_11gR2.php ) but all with connection to original DB (e.g. entries in tnsanmes.ora)
    Backup runs a simple
    BACKUP DATABASE PLUS ARCHIVELOG;
    DB Version is 11.2.0.2 on Linux.

    Many thanks to your help. Finally I was able to restore the DB. The steps I used (similiarly also mentioned in some of the links above).
    1.) Copy backup (backupset, autobackup, archivelog) to the new server into directories
    /export/restore/autobackup/2012_03_01
    /export/restore/autobackup/2012_03_02
    /export/restore/archivelog/2012_03_01
    /export/restore/backupset/2012_03_01
    2.) create pfile initDBREST.ora
    DB_NAME=DBREST
    3.) Mount DB
    ORACLE_SID=DBREST; export ORACLE_SID
    sqlplus / as sysdba
    STARTUP NOMOUNT;
    4.) Connect to auxiliary DB
    ORACLE_SID=DBREST; export ORACLE_SID
    rman AUXILIARY /
    5.) Create directories for new DB for datafiles in e.g. /export/oradata/DBREST/
    6.) Duplicate DB and reset parameter if necessary (e.g. memory_max as test server is lower on RAM)
    DUPLICATE DATABASE TO DBREST
    until time "to_date('02.03.2012 15:00:00','DD.MM.YYYY hh24:mi:ss')"
    DB_FILE_NAME_CONVERT '/export/fs1/oradata/oldDB/','/export/oradata/DBREST/', '/export/fs2/oradata/oldDB/','/export/oradata/DBREST/'
    SPFILE
    SET MEMORY_TARGET '2G'
    SET MEMORY_MAX_TARGET '2G'
    SET db_recovery_file_dest '/export/oradata/'
    SET db_recovery_file_dest_size '100G'
    BACKUP LOCATION '/export/restore'
    NOFILENAMECHECK;
    7.) create temporary tablespace

  • How can I make a backup without Time Machine?

    I'm finally upgrading to Mountain Lion, but my Seagate GoFlex harddrive isn't letting me backup via time machine.  do I have to reformat the harddrive to be used with time machine?  or is there an app I can download so I can get a clean install of OS X without having to loose any of my files or apps?

    The disk for Time Machine should be firmatted as HFS+
    If you want to do a backup so that you can do an erase & install, I suggest that you make a bootable clone with either CCC or SuperDuper.
    Allan

Maybe you are looking for

  • Receiver SFTP Error

    Hi All, We are facing issue in receiver SFTP scenario, sender is a simple flat file and receiver is SFTP. In the receiver SFTP channel we are getting below error: Delivery of the message to the application using connection SFTP_http://sap.com/xi/XI/S

  • SOAP Header creating problem

    Hello all, I have a Apache SOAP-RPC server running at my end. I have a Java method exposed thru a service. My Soap-RPC works great when I test it using a Java Client. Now I want to call this service using a Visual Basic client. Once I sent the reques

  • Short Dump...Bottleneck pushed it out of the local program buffer

    Hello!! We have had a dump in production. The message is: While the program was running, the program "SAPLV07A" had to be reloaded because a bottleneck pushed it out of the local program buffer. However, the database was found to contain an already c

  • URGENT Wanting to turn java files into an exectuable file

    Hi i have a swing program thats made up of a number of java files. Is there a way i can make an executable for them???

  • CS4: Clone tool cursor throws shadow under cursor

    Well, it's not really a shadow. It appears to be a sample of where I OPTION-CLICK. All good and fine and I guess it must be thought of as an improvement, but for me it makes the clone tool unworkable because the 'shadow' shadows my clone cursor every