How do I edit out the first 20 seconds of music in an Aperture slide show?

I don't want to use the first 20 seconds of a piece of music in a slide show.  How do I start the music 20 seconds into the song?  Thanks.

Since no one else has answered, here is my solution:
I use a free program called Audacity http://audacity.sourceforge.net
I export the track from iTunes, trim with Audacity and then re-import the new version back to iTunes (".trimmed)" so that it appears in Aperture music selection.
(I have no connection/investment whatsoever of any kind in the developer of Audacity!)

Similar Messages

  • How can I find out the first intial row in VA02-output transaction??

    How can I find out the first intial row in the screen which appears during sales order change (VA02) >>enter the sales order number >>after the first screen appears >>in the menu bar go to EXTRAS>>OUTPUT>>HEADER>>EDIT??
    I have to find out the first row in the OUTPUT column which is empty,then populate it with some data using BDC.
    usefull answers will be rewarded.
    regards,
    Shashank .

    Pass the sale order number in the object key of NAST table,
    if u get 3 entires, then u need to place ur entry in the fourth row in that table control thru BDC.
    I think u got the logic.
    Regards,
    Sujatha.

  • How do you edit out the date and time stamp from a photo

    How do you edit out the date and time stamp from a photo

    You can blur it out with retouch
    The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
    Regards
    Léonie

  • How do i edit out the dark places in a pdf?

    how do i edit out the dark places in a pdf? I xeroxed pages from a book, and the xeroxes were not of great quality--lots of shadows where the book opened on the copier glass.
    When I had the xeroxes scanned, the dark places turned deep black and made the xeroxed/ scanned texts almost unreadable.
    How can I lighten the images in the PDFs so that the text is readable again?

    Depending on your Acrobat version; see if anything in these Blogs help
    http://blogs.adobe.com/acrolaw/2007/12/cleaning_up_scanned_images/
    http://blogs.adobe.com/acrolaw/2014/01/how-to-erase-and-clean-up-a-scanned-pdf-in-acrobat- xi/

  • Recorded a software instrument on garageband, how do I edit out the "silence"?

    I have recorded a software track, how do I edit out the "silence" that was created before and after I recorded using the keyboard?
    Hope that made sense, thanks.

    If you want to get rid of it forever, you could also snip and delete it:
    Move the red timeline to the spot where you want to snip and remove the silence before your music comes in. Press Command T to snip. Then click anywhere in the work area to deselect all segments. Then select the beginning silent segment by clicking on it, and delete. Do the same at the end.

  • How do I edit out the middle of a video clip?

    I am used to shortening a movie clip on either end, but don't know how to cut out a portion in the middle. Please help me. Thank you.

    Hello Miriam Griggs
    There are a few ways you can do that. Check out the  page below and it will layout the multiple ways to trim clips, even the stuff in the middle.
    Trim, split, and move clips
    http://help.apple.com/imovie/mac/10.0/#movf8b8fc9b2
    Regards,
    -Norm G.

  • How do i find out the size of my checked music

    I'm trying to prepare the tracks I want to transfer to my new iphone 3g (16gig). I have went through "checking" the music i want and "unchecking" that which I dont. Only problem is I dont know the total size of the checked music niw. Anyone know how i figure this out?

    Provided getSomeElements() returns an int[], of course...
    HTH :o)

  • How do I edit out the previous email addresses from the pop up list of address in Apple Mail?

    Whenever someone sends me a new email address, I go to address book and edit the page. The problem is that whenever I go to send an email and start to type the address in, the drop down menu lists possible entries as I type, and it still keeps the old address on that list, sometimes above the new address and if I don't carefully check, it will go out to the wrong address.
    It seems to hold onto the old addresses no matter what I do. I have edited, tossed out or changed in the address line of the email, and it still holds onto the old addresses.
    Any suggestions?
    Thanks.

    If I start an email to John Doe. I type in his name and if I look at the drop down menu when I click his name, it will offer several options, including "open in address book". Makes sense. He is already there.
    But some names, a few to be sure, have "add to address book" even though they are already there.
    And if I open the address book and open their page, I will see all the info, just as I should.
    But if I click on the "add to address book", the same email address is repeated on their page in the address book. So I could end up with the same email address 5 times on the page.
    Someone told me once that if I cannot cure the bug then I should consider it a "feature".

  • How do I edit out the mouse pointer from Video Demos?

    I have recorded a few short video demos and would like to leave the mouse pointer in so it can be seen, but on occasions I need to edit it out, is there a way to do this?

  • How do I find out the encoding used to import music?

    I want to be sure that all of my music is imported using apple lossless encoding. Can I tell from the file somehow or do I have to re-import everything? thanks

    Select a track in your iTunes library that you have imported
    Select 'Get Info'
    It will then tell you what format it is in
    You can also go to the View menu and turn on listing a column called 'Kind' which will say whether it is lossless or not.

  • I don't know how to program my DVR to edit out the commercials

    I had heard that that feature was available with the DVR.  Does anyone know how to do that?

    There is no way to edit out the commercials. If you are watching a previously recorded show or are in a buffer for live TV, you can skip past the commercials. The skip button on the remote and be programmed to jump ahead 10sec, 30 sec, 1 min, 5 min. So set the time frame to skip and press the skip button until you are past the commercials. I then use the previous button to jump backwards to where the show started again. That can be programmed to the same time frames. Me personally, I have mine set to skip 30 seconds and jump back 10. With the average commercial break being 3 minutes, I press the skip button about 6 times very quickly, then press it until I'm into my show. Once in my show, I jump back 10 seconds at a time until either the very end of the commercial break or the start of the show.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Editing Music for an IDVD slide show

    Is there a way to edit a song that you are using when you are creating an IDVD? For example, I have a song I like for a particular slide show I've created. However, I want to edit out the first part of the song because it's just too slow. Is there a way to do this. I have I-Life - not sure if there is a program there I can use or if you can do it with IDVD
    Thanks!

    Each slide is treated as one chapter within iDvd's slideshow. Suggest you keep each slideshow at 99 slides or less for best results in predictable Dvd playback. If you exceed 99 slides per slideshow you may get mixed results depending on which set top dvd player one uses. Some set top players will freeze at slide #100, 200, etc. Some will pause briefly (like the pause between Dual Layers), and others won't read it at all. The 99 slideshow limit does not apply if one uses a mac for playback in most cases.
    If you must exceed 99 slides then consider using iMovie or a 3rd party app to create the slideshow. Other than iM, here are 2 more apps that come highly recommended in this Forum:
    http://www.boinx.com/fotomagico/overview/
    http://www.lqgraphics.com/software/phototomovie.php
    If you happen to own a QT Pro key, then it too has the ability to edit both audio and video (as do other apple video editing apps like iMovie and FCP/FCE).
    Other apps that edit audio well are Garage Band as well as these handy 3rd party apps:
    http://www.hairersoft.com/Amadeus.html
    http://www.arizona-software.ch/photopresenter/
    Hope this helps but if not just come on back.
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

  • Advanced edit hyperlink-properties grayed out the first time

    advanced edit hyperlink-properties grayed out the first time
    Sub Problem:
    When using the advanced edit cursor, right click Is used to select a hyperlink-properties the first time the dialog box pops up it does not have “focus” (not sure that is the right term, but the box is grayed out and will not respond to the keyboard.). It must be mouse clicked to get focus. The second time a link is right clicked to properties the popup responds to the key board and will move to the action tab with ctrl-tab
    It’s not clear to me where the acrobat program is at that point.
    Is that a known action or problem with acrobat pro 9.4.4?
    Is there a key or keys from the keyboard that can force focus to the box?
    The problem is each file I open I have to manually find a link and right click it to get the box then click in the box to get “focus”. After the first one the box pops up with focus.
    John
    Main Problem:
    I have been working on converting a set of pdf files with 1000’s of hyperlinks like www.site.com\folder1\file1.pdf#page=10
    To jump to a local copy of the files with a relative type link
    ../folder1/file1.pdf and then go to the proper page.
    I have found that it can be done manually by changing the hyperlink to a javascript
    var otherDoc = app.openDoc('../folder1/file1.pdf', this);otherDoc.pageNum = 10 - 1;
    and setting each destination file with a disclose()=true;
    Based on the help so far that java script cannot access the hyperlink value in a link
    See: http://forums.adobe.com/thread/1039908?tstart=60
    I have resorted to the following plan using acrobat javascript, an external keyboard macro recorder and excel in combination to get around the problem
    Four folder level acrobat javascripts with “buttons”
    One to get all the link quads in an array, in the pdf and report the total number
    The second creates a form field in the far corner of the first page and moves there.
    The third jumps to each link found by creating a form field just to the left of the link and zooms in so it can be selected by a “mouse click” from the keyboard macro recorder 
    The forth deletes the form field
    The keyboard macro recorder runs javascript 2 and then 3 then clicks on the link just to the right of the middle of the screen and uses keys to get to the advanced editing to get to edit the hyperlink .
    The hyperlink is then copied to excel where it is converted using string functions to the needed javascript text to be copied back.
    To the acrobat file into a java script (after deleting the hyperlink)
    Rinse/lather/repeat
    I have been able to convert about 150 links an hour.
    Better then hand typing, but not like having java access to the links.
    I am looking to improve the solution

    Rick,
    I didn't intend to say you must close the X box after each
    apply. It's OK to apply one change and go to another item before
    closing the dialogue. It's the OK button that messes up sometimes.
    Even when you hit the Apply button for a very large selection
    of topics, the OK button sometimes will undo the apply, not
    necessarily for all selected topics. Even when you've made just one
    batch change.
    I think it's because OK tries to re-set all settings (that's
    why it takes forever), but does not correctly pick up the mass
    changes previously applied. Or maybe it takes forever because it
    can't find the new info and defaults to the existing settings.
    A pain in the butt when you're trying to apply a stylesheet
    to a very large number of topics. Please don't ask me to define "a
    large number."
    Maybe it's a space limit in RH, similar to the space limit
    for the number of characters in a batch of file names you want to
    import. Or maybe the OK button doesn't look in the right places.
    Harvey

  • How do I edit out a fence that is in front of the background???

    How do I edit out a fence that is in front of the background???

    Can you post the photo to help explain what you are talking about?

  • How can i find out the table hierarchy

    Hi experts,
    I have one doubt. how can i find out the table hierarchy in the particular schema.
    Let me explain my requirement in detail.. In my Database i have nearly 250 table each table have it's own temporary table(for authorization purpose we are maintaining the temporary tables) for each day i have to clear the temporary table data.
    All temporary table connected with each other. i mean all the table having foreign key relationship.. while i attempt the delete the data from the temporary table it showed ORA-02292: integrity constraint  violated - child record found.
    So can any one please tell how can i delete the child table record first and then parent record table record.
    Thanks in advance
    Arun

    CREATE OR REPLACE FUNCTION get_child_tables (
    ptable VARCHAR2,
    powner VARCHAR2 DEFAULT 'SCOTT',
    plevel NUMBER DEFAULT 10
    RETURN stringarray
    -- -- create this ON SQL*PLUS "CREATE OR REPLACE TYPE STRINGARRAY AS TABLE OF VARCHAR2(50);"
    -- AUTHID CURRENT_USER
    PIPELINED
    AUTHOR DATE VERSION COMMENTS
    ======================================================================================
    [email protected] 26-OCT-2009 1.0 Developed to ease developers effort to find Nth level of Referential integrity
    ======================================================================================
    -- PURPOSE -> To find PARENT=> CHILD relational TABLE(S) in Oracle upto a depth max N Level.
    --SYNTAX TO USE
    SELECT * FROM TABLE( get_child_tables('DEPT','SCOTT',3)); Store this query in a file for your use
    SELECT * FROM TABLE( get_child_tables('EMPLOYEE')); Store this query in a file for your use
    -- RESULTS looks as below
    --1 => DEPT
    --2 => EMP
    --2 => EMP2
    --3 => EMP_CHILD
    --3 => EMP2_CHILD
    -- and so on
    --This can be leveraged to use in any oracle database REGION 10g having and above.
    --This FUNCTION gives formatted result of the Oracle 10g Hierarchical query result coded in the cursor
    --to find MASTER => CHILD relational TABLE(S) upto a depth max 10 Level.
    --The result of the PIPELINED function can be retrieved using Oracle new operator
    --TABLE(array name) in SQL query.
    --Due to the AUTHID CURRENT_USER compiler directive any user can use based on his/her access privileges on the database.
    --GRANT EXECUTE ON SCOTT.get_child_tables TO PUBLIC;
    --CREATE OR REPLACE PUBLIC SYNONYM get_child_tables FOR SCOTT.get_child_tables;
    IS
    atname stringarray := stringarray ();
    -- create this ON SQL*PLUS CREATE OR REPLACE TYPE STRINGARRAY AS TABLE OF VARCHAR2(50);
    vlevel NUMBER;
    vtname VARCHAR2 (50);
    nindex NUMBER := 0;
    bprocessed BOOLEAN := FALSE;
    CURSOR c1 (powner_in IN VARCHAR2, ptable_in VARCHAR2, plevel_in NUMBER)
    IS
    SELECT LEVEL, LPAD (' ', (LEVEL - 1) * 2, ' ') || pt AS "TNAME"
    FROM (SELECT a.owner w1, a.table_name pt, a.constraint_name c1,
    a.r_constraint_name r1, b.owner w2, b.table_name ct,
    b.constraint_name c2, b.r_constraint_name r2
    FROM all_constraints a, all_constraints b
    WHERE a.constraint_name = b.r_constraint_name(+)
    AND a.owner = b.owner(+)
    AND a.owner =
    UPPER (powner)
    -- Change Owner here while testing
    --AND A.r_constraint_name IS NULL
    AND a.constraint_type IN ('P', 'R')) v1
    START WITH pt =
    UPPER
    (ptable)
    -- Change your master table here while testing the QUERY
    CONNECT BY PRIOR ct = pt AND LEVEL <= plevel;
    -- Change lavel here while testing
    BEGIN
    atname.EXTEND;
    atname (1) := 'NOTHING';
    OPEN c1 (powner, ptable, plevel);
    LOOP
    bprocessed := FALSE;
    FETCH c1
    INTO vlevel, vtname;
    IF nindex > 1 AND atname (atname.LAST - 1) = vtname
    THEN
    --DBMS_OUTPUT.PUT_LINE('2 ==== vtname  ' ||vtname || '   '|| atname.count|| '   '||atname.last ||  '   '||atname( atname.last-1));
    bprocessed := TRUE;
    END IF;
    IF NOT bprocessed
    THEN
    nindex := nindex + 1;
    atname.EXTEND;
    atname (nindex) := vtname;
    PIPE ROW (vlevel || ' => ' || vtname);
    DBMS_OUTPUT.put_line ( ' **** nindex - atname( nindex) '
    || nindex
    || ' - '
    || atname (nindex)
    DLOG('ADDING ',vTname); A LOGGING ATONOMUS PROCEDURE FOR DEBUG PURPOSE
    END IF;
    EXIT WHEN c1%NOTFOUND;
    END LOOP;
    CLOSE c1;
    FOR i IN 1 .. atname.COUNT
    LOOP
    DBMS_OUTPUT.PUT_LINE('atname (i) ' ||atname (i));
    END LOOP;
    RETURN;
    EXCEPTION
    WHEN no_data_needed
    THEN -- THIS EXCEPTION HAS TO BE THERE TO GET THE FUCTION WORKABLE
    DBMS_OUTPUT.put_line (SQLERRM);
    RETURN;
    --SELECT * FROM TABLE( get_child_tables('TB_XOP_LETR_TEMPLATE','OPS$CMS',5));
    END get_child_tables;
    Edited by: user3066657 on Jul 21, 2011 8:42 AM
    Edited by: user3066657 on Jul 21, 2011 11:26 AM

Maybe you are looking for